path: root/docs/markdown/Commands.md

# Command-line commands

There are two different ways of invoking Meson. First, you can run it directly
from the source tree with the command `/path/to/source/meson.py`. Meson may
also be installed in which case the command is simply `meson`. In this manual
we only use the latter format for simplicity.

Meson is invoked using the following syntax:
`meson [COMMAND] [COMMAND_OPTIONS]`

This section describes all available commands and some of their Optional arguments.
The most common workflow is to run [`setup`](#setup), followed by [`compile`](#compile), and then [`install`](#install).

For the full list of all available options for a specific command use the following syntax:
`meson COMMAND --help`

### configure

```
$ meson configure [-h] [--prefix PREFIX] [--bindir BINDIR]
                  [--datadir DATADIR] [--includedir INCLUDEDIR]
                  [--infodir INFODIR] [--libdir LIBDIR]
                  [--libexecdir LIBEXECDIR] [--localedir LOCALEDIR]
                  [--localstatedir LOCALSTATEDIR] [--mandir MANDIR]
                  [--sbindir SBINDIR] [--sharedstatedir SHAREDSTATEDIR]
                  [--sysconfdir SYSCONFDIR]
                  [--auto-features {enabled,disabled,auto}]
                  [--backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}]
                  [--buildtype {plain,debug,debugoptimized,release,minsize,custom}]
                  [--debug] [--default-library {shared,static,both}]
                  [--errorlogs] [--install-umask INSTALL_UMASK]
                  [--layout {mirror,flat}] [--optimization {0,g,1,2,3,s}]
                  [--stdsplit] [--strip] [--unity {on,off,subprojects}]
                  [--unity-size UNITY_SIZE] [--warnlevel {0,1,2,3}]
                  [--werror]
                  [--wrap-mode {default,nofallback,nodownload,forcefallback}]
                  [--force-fallback-for FORCE_FALLBACK_FOR]
                  [--pkg-config-path PKG_CONFIG_PATH]
                  [--build.pkg-config-path BUILD.PKG_CONFIG_PATH]
                  [--cmake-prefix-path CMAKE_PREFIX_PATH]
                  [--build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH]
                  [-D option] [--clearcache]
                  [builddir]
```

Changes options of a configured meson project.

```
positional arguments:
  builddir

optional arguments:
  -h, --help                            show this help message and exit
  --prefix PREFIX                       Installation prefix.
  --bindir BINDIR                       Executable directory.
  --datadir DATADIR                     Data file directory.
  --includedir INCLUDEDIR               Header file directory.
  --infodir INFODIR                     Info page directory.
  --libdir LIBDIR                       Library directory.
  --libexecdir LIBEXECDIR               Library executable directory.
  --localedir LOCALEDIR                 Locale data directory.
  --localstatedir LOCALSTATEDIR         Localstate data directory.
  --mandir MANDIR                       Manual page directory.
  --sbindir SBINDIR                     System executable directory.
  --sharedstatedir SHAREDSTATEDIR       Architecture-independent data directory.
  --sysconfdir SYSCONFDIR               Sysconf data directory.
  --auto-features {enabled,disabled,auto}
                                        Override value of all 'auto' features
                                        (default: auto).
  --backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}
                                        Backend to use (default: ninja).
  --buildtype {plain,debug,debugoptimized,release,minsize,custom}
                                        Build type to use (default: debug).
  --debug                               Debug
  --default-library {shared,static,both}
                                        Default library type (default: shared).
  --errorlogs                           Whether to print the logs from failing
                                        tests
  --install-umask INSTALL_UMASK         Default umask to apply on permissions of
                                        installed files (default: 022).
  --layout {mirror,flat}                Build directory layout (default:
                                        mirror).
  --optimization {0,g,1,2,3,s}          Optimization level (default: 0).
  --stdsplit                            Split stdout and stderr in test logs
  --strip                               Strip targets on install
  --unity {on,off,subprojects}          Unity build (default: off).
  --unity-size UNITY_SIZE               Unity block size (default: (2, None,
                                        4)).
  --warnlevel {0,1,2,3}                 Compiler warning level to use (default:
                                        1).
  --werror                              Treat warnings as errors
  --wrap-mode {default,nofallback,nodownload,forcefallback}
                                        Wrap mode (default: default).
  --force-fallback-for FORCE_FALLBACK_FOR
                                        Force fallback for those subprojects
                                        (default: []).
  --pkg-config-path PKG_CONFIG_PATH     List of additional paths for pkg-config
                                        to search (default: []). (just for host
                                        machine)
  --build.pkg-config-path BUILD.PKG_CONFIG_PATH
                                        List of additional paths for pkg-config
                                        to search (default: []). (just for build
                                        machine)
  --cmake-prefix-path CMAKE_PREFIX_PATH
                                        List of additional prefixes for cmake to
                                        search (default: []). (just for host
                                        machine)
  --build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH
                                        List of additional prefixes for cmake to
                                        search (default: []). (just for build
                                        machine)
  -D option                             Set the value of an option, can be used
                                        several times to set multiple options.
  --clearcache                          Clear cached state (e.g. found
                                        dependencies)
```

Most arguments are the same as in [`setup`](#setup).

Note: reconfiguring project will not reset options to their default values (even if they were changed in `meson.build`).

#### Examples:

List all available options:
```
meson configure builddir
```

Change value of a single option:
```
meson configure builddir -Doption=new_value
```

### compile

*(since 0.54.0)*

```
$ meson compile [-h] [-j JOBS] [-l LOAD_AVERAGE] [--clean] [-C BUILDDIR]
                [--verbose]
```

Builds a default or a specified target of a configured meson project.

```
optional arguments:
  -h, --help                            show this help message and exit
  -j JOBS, --jobs JOBS                  The number of worker jobs to run (if
                                        supported). If the value is less than 1
                                        the build program will guess.
  -l LOAD_AVERAGE, --load-average LOAD_AVERAGE
                                        The system load average to try to
                                        maintain (if supported)
  --clean                               Clean the build directory.
  -C BUILDDIR                           The directory containing build files to
                                        be built.
  --verbose                             Show more verbose output.
```

#### Examples:

Build the project:
```
meson compile -C builddir
```

### dist

*(since 0.52.0)*

```
$ meson dist [-h] [-C WD] [--formats FORMATS] [--include-subprojects]
             [--no-tests]
```

Generates a release archive from the current source tree.

```
optional arguments:
  -h, --help             show this help message and exit
  -C WD                  directory to cd into before running
  --formats FORMATS      Comma separated list of archive types to create.
  --include-subprojects  Include source code of subprojects that have been used
                         for the build.
  --no-tests             Do not build and test generated packages.
```

See [notes about creating releases](Creating-releases.md) for more info.

#### Examples:

Create a release archive:
```
meson dist -C builddir
```

### init

*(since 0.45.0)*

```
$ meson init [-h] [-C WD] [-n NAME] [-e EXECUTABLE] [-d DEPS]
             [-l {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust}] [-b]
             [--builddir BUILDDIR] [-f] [--type {executable,library}]
             [--version VERSION]
             [sourcefile [sourcefile ...]]
```

Creates a basic set of build files based on a template.

```
positional arguments:
  sourcefile                            source files. default: all recognized
                                        files in current directory

optional arguments:
  -h, --help                            show this help message and exit
  -C WD                                 directory to cd into before running
  -n NAME, --name NAME                  project name. default: name of current
                                        directory
  -e EXECUTABLE, --executable EXECUTABLE
                                        executable name. default: project name
  -d DEPS, --deps DEPS                  dependencies, comma-separated
  -l {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust}, --language {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust}
                                        project language. default: autodetected
                                        based on source files
  -b, --build                           build after generation
  --builddir BUILDDIR                   directory for build
  -f, --force                           force overwrite of existing files and
                                        directories.
  --type {executable,library}           project type. default: executable based
                                        project
  --version VERSION                     project version. default: 0.1
```

#### Examples:

Create a project in `sourcedir`:
```
meson init -C sourcedir
```

### introspect

```
$ meson introspect [-h] [--ast] [--benchmarks] [--buildoptions]
                   [--buildsystem-files] [--dependencies]
                   [--scan-dependencies] [--installed] [--projectinfo]
                   [--targets] [--tests]
                   [--backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}]
                   [-a] [-i] [-f]
                   [builddir]
```

Displays information about a configured meson project.

```
positional arguments:
  builddir                              The build directory

optional arguments:
  -h, --help                            show this help message and exit
  --ast                                 Dump the AST of the meson file.
  --benchmarks                          List all benchmarks.
  --buildoptions                        List all build options.
  --buildsystem-files                   List files that make up the build
                                        system.
  --dependencies                        List external dependencies.
  --scan-dependencies                   Scan for dependencies used in the
                                        meson.build file.
  --installed                           List all installed files and
                                        directories.
  --projectinfo                         Information about projects.
  --targets                             List top level targets.
  --tests                               List all unit tests.
  --backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}
                                        The backend to use for the
                                        --buildoptions introspection.
  -a, --all                             Print all available information.
  -i, --indent                          Enable pretty printed JSON.
  -f, --force-object-output             Always use the new JSON format for
                                        multiple entries (even for 0 and 1
                                        introspection commands)
```

#### Examples:

Display basic information about a configured project in `builddir`:
```
meson introspect builddir
```

### install

*(since 0.47.0)*

```
$ meson install [-h] [-C WD] [--no-rebuild] [--only-changed] [--quiet]
```

Installs the project to the prefix specified in [`setup`](#setup).

```
optional arguments:
  -h, --help      show this help message and exit
  -C WD           directory to cd into before running
  --no-rebuild    Do not rebuild before installing.
  --only-changed  Only overwrite files that are older than the copied file.
  --quiet         Do not print every file that was installed.
```

See [the installation documentation](Installing.md) for more info.

#### Examples:

Install project to `prefix`:
```
meson install -C builddir
```

Install project to `$DESTDIR/prefix`:
```
DESTDIR=/path/to/staging/area meson install -C builddir
```

### rewrite

*(since 0.50.0)*

```
$ meson rewrite [-h] [-s SRCDIR] [-V] [-S]
                {target,kwargs,default-options,command} ...
```

Modifies the meson project.

```
optional arguments:
  -h, --help                            show this help message and exit
  -s SRCDIR, --sourcedir SRCDIR         Path to source directory.
  -V, --verbose                         Enable verbose output
  -S, --skip-errors                     Skip errors instead of aborting

Rewriter commands:
  Rewrite command to execute

  {target,kwargs,default-options,command}
    target                              Modify a target
    kwargs                              Modify keyword arguments
    default-options                     Modify the project default options
    command                             Execute a JSON array of commands
```

See [the meson file rewriter documentation](Rewriter.md) for more info.

### setup

```
$ meson setup [-h] [--prefix PREFIX] [--bindir BINDIR] [--datadir DATADIR]
              [--includedir INCLUDEDIR] [--infodir INFODIR]
              [--libdir LIBDIR] [--libexecdir LIBEXECDIR]
              [--localedir LOCALEDIR] [--localstatedir LOCALSTATEDIR]
              [--mandir MANDIR] [--sbindir SBINDIR]
              [--sharedstatedir SHAREDSTATEDIR] [--sysconfdir SYSCONFDIR]
              [--auto-features {enabled,disabled,auto}]
              [--backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}]
              [--buildtype {plain,debug,debugoptimized,release,minsize,custom}]
              [--debug] [--default-library {shared,static,both}]
              [--errorlogs] [--install-umask INSTALL_UMASK]
              [--layout {mirror,flat}] [--optimization {0,g,1,2,3,s}]
              [--stdsplit] [--strip] [--unity {on,off,subprojects}]
              [--unity-size UNITY_SIZE] [--warnlevel {0,1,2,3}] [--werror]
              [--wrap-mode {default,nofallback,nodownload,forcefallback}]
              [--force-fallback-for FORCE_FALLBACK_FOR]
              [--pkg-config-path PKG_CONFIG_PATH]
              [--build.pkg-config-path BUILD.PKG_CONFIG_PATH]
              [--cmake-prefix-path CMAKE_PREFIX_PATH]
              [--build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH]
              [-D option] [--native-file NATIVE_FILE]
              [--cross-file CROSS_FILE] [-v] [--fatal-meson-warnings]
              [--reconfigure] [--wipe]
              [builddir] [sourcedir]
```

Configures a build directory for the meson project.

This is the default meson command (invoked if there was no COMMAND supplied).

```
positional arguments:
  builddir
  sourcedir

optional arguments:
  -h, --help                            show this help message and exit
  --prefix PREFIX                       Installation prefix.
  --bindir BINDIR                       Executable directory.
  --datadir DATADIR                     Data file directory.
  --includedir INCLUDEDIR               Header file directory.
  --infodir INFODIR                     Info page directory.
  --libdir LIBDIR                       Library directory.
  --libexecdir LIBEXECDIR               Library executable directory.
  --localedir LOCALEDIR                 Locale data directory.
  --localstatedir LOCALSTATEDIR         Localstate data directory.
  --mandir MANDIR                       Manual page directory.
  --sbindir SBINDIR                     System executable directory.
  --sharedstatedir SHAREDSTATEDIR       Architecture-independent data directory.
  --sysconfdir SYSCONFDIR               Sysconf data directory.
  --auto-features {enabled,disabled,auto}
                                        Override value of all 'auto' features
                                        (default: auto).
  --backend {ninja,vs,vs2010,vs2015,vs2017,vs2019,xcode}
                                        Backend to use (default: ninja).
  --buildtype {plain,debug,debugoptimized,release,minsize,custom}
                                        Build type to use (default: debug).
  --debug                               Debug
  --default-library {shared,static,both}
                                        Default library type (default: shared).
  --errorlogs                           Whether to print the logs from failing
                                        tests
  --install-umask INSTALL_UMASK         Default umask to apply on permissions of
                                        installed files (default: 022).
  --layout {mirror,flat}                Build directory layout (default:
                                        mirror).
  --optimization {0,g,1,2,3,s}          Optimization level (default: 0).
  --stdsplit                            Split stdout and stderr in test logs
  --strip                               Strip targets on install
  --unity {on,off,subprojects}          Unity build (default: off).
  --unity-size UNITY_SIZE               Unity block size (default: (2, None,
                                        4)).
  --warnlevel {0,1,2,3}                 Compiler warning level to use (default:
                                        1).
  --werror                              Treat warnings as errors
  --wrap-mode {default,nofallback,nodownload,forcefallback}
                                        Wrap mode (default: default).
  --force-fallback-for FORCE_FALLBACK_FOR
                                        Force fallback for those subprojects
                                        (default: []).
  --pkg-config-path PKG_CONFIG_PATH     List of additional paths for pkg-config
                                        to search (default: []). (just for host
                                        machine)
  --build.pkg-config-path BUILD.PKG_CONFIG_PATH
                                        List of additional paths for pkg-config
                                        to search (default: []). (just for build
                                        machine)
  --cmake-prefix-path CMAKE_PREFIX_PATH
                                        List of additional prefixes for cmake to
                                        search (default: []). (just for host
                                        machine)
  --build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH
                                        List of additional prefixes for cmake to
                                        search (default: []). (just for build
                                        machine)
  -D option                             Set the value of an option, can be used
                                        several times to set multiple options.
  --native-file NATIVE_FILE             File containing overrides for native
                                        compilation environment.
  --cross-file CROSS_FILE               File describing cross compilation
                                        environment.
  -v, --version                         show program's version number and exit
  --fatal-meson-warnings                Make all Meson warnings fatal
  --reconfigure                         Set options and reconfigure the project.
                                        Useful when new options have been added
                                        to the project and the default value is
                                        not working.
  --wipe                                Wipe build directory and reconfigure
                                        using previous command line options.
                                        Useful when build directory got
                                        corrupted, or when rebuilding with a
                                        newer version of meson.
```

See [meson introduction page](Running-Meson.md#configuring-the-build-directory) for more info.

#### Examples:

Configures `builddir` with default values:
```
meson setup builddir
```

### subprojects

*(since 0.49.0)*

```
$ meson subprojects [-h] {update,checkout,download,foreach} ...
```

Manages subprojects of the meson project.

```
optional arguments:
  -h, --help                          show this help message and exit

Commands:
  {update,checkout,download,foreach}
    update                            Update all subprojects from wrap files
    checkout                          Checkout a branch (git only)
    download                          Ensure subprojects are fetched, even if
                                      not in use. Already downloaded subprojects
                                      are not modified. This can be used to pre-
                                      fetch all subprojects and avoid downloads
                                      during configure.
    foreach                           Execute a command in each subproject
                                      directory.
```

### test

```
$ meson test [-h] [--repeat REPEAT] [--no-rebuild] [--gdb]
             [--gdb-path GDB_PATH] [--list] [--wrapper WRAPPER] [-C WD]
             [--suite SUITE] [--no-suite SUITE] [--no-stdsplit]
             [--print-errorlogs] [--benchmark] [--logbase LOGBASE]
             [--num-processes NUM_PROCESSES] [-v] [-q]
             [-t TIMEOUT_MULTIPLIER] [--setup SETUP]
             [--test-args TEST_ARGS]
             [args [args ...]]
```

Run tests for the configure meson project.

```
positional arguments:
  args                                  Optional list of tests to run

optional arguments:
  -h, --help                            show this help message and exit
  --repeat REPEAT                       Number of times to run the tests.
  --no-rebuild                          Do not rebuild before running tests.
  --gdb                                 Run test under gdb.
  --gdb-path GDB_PATH                   Path to the gdb binary (default: gdb).
  --list                                List available tests.
  --wrapper WRAPPER                     wrapper to run tests with (e.g.
                                        Valgrind)
  -C WD                                 directory to cd into before running
  --suite SUITE                         Only run tests belonging to the given
                                        suite.
  --no-suite SUITE                      Do not run tests belonging to the given
                                        suite.
  --no-stdsplit                         Do not split stderr and stdout in test
                                        logs.
  --print-errorlogs                     Whether to print failing tests' logs.
  --benchmark                           Run benchmarks instead of tests.
  --logbase LOGBASE                     Base name for log file.
  --num-processes NUM_PROCESSES         How many parallel processes to use.
  -v, --verbose                         Do not redirect stdout and stderr
  -q, --quiet                           Produce less output to the terminal.
  -t TIMEOUT_MULTIPLIER, --timeout-multiplier TIMEOUT_MULTIPLIER
                                        Define a multiplier for test timeout,
                                        for example when running tests in
                                        particular conditions they might take
                                        more time to execute.
  --setup SETUP                         Which test setup to use.
  --test-args TEST_ARGS                 Arguments to pass to the specified
                                        test(s) or all tests
```

See [the unit test documentation](Unit-tests.md) for more info.

#### Examples:

Run tests for the project:
```
meson test -C builddir
```

Run only `specific_test_1` and `specific_test_2`:
```
meson test -C builddir specific_test_1 specific_test_2
```

### wrap

```
$ meson wrap [-h] {list,search,install,update,info,status,promote} ...
```

An utility to manage WrapDB dependencies.

```
optional arguments:
  -h, --help                            show this help message and exit

Commands:
  {list,search,install,update,info,status,promote}
    list                                show all available projects
    search                              search the db by name
    install                             install the specified project
    update                              update the project to its newest
                                        available release
    info                                show available versions of a project
    status                              show installed and available versions of
                                        your projects
    promote                             bring a subsubproject up to the master
                                        project
```

See [the WrapDB tool documentation](Using-wraptool.md) for more info.