/* * AHCI test cases * * Copyright (c) 2014 John Snow * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include #include #include #include #include "libqtest.h" #include "libqos/libqos-pc.h" #include "libqos/ahci.h" #include "libqos/pci-pc.h" #include "qemu-common.h" #include "qemu/host-utils.h" #include "hw/pci/pci_ids.h" #include "hw/pci/pci_regs.h" /* Test-specific defines -- in MiB */ #define TEST_IMAGE_SIZE_MB (200 * 1024) #define TEST_IMAGE_SECTORS ((TEST_IMAGE_SIZE_MB / AHCI_SECTOR_SIZE) \ * 1024 * 1024) /*** Globals ***/ static char tmp_path[] = "/tmp/qtest.XXXXXX"; static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; static bool ahci_pedantic; /*** Function Declarations ***/ static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port); static void ahci_test_pci_spec(AHCIQState *ahci); static void ahci_test_pci_caps(AHCIQState *ahci, uint16_t header, uint8_t offset); static void ahci_test_satacap(AHCIQState *ahci, uint8_t offset); static void ahci_test_msicap(AHCIQState *ahci, uint8_t offset); static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset); /*** Utilities ***/ static void string_bswap16(uint16_t *s, size_t bytes) { g_assert_cmphex((bytes & 1), ==, 0); bytes /= 2; while (bytes--) { *s = bswap16(*s); s++; } } static void generate_pattern(void *buffer, size_t len, size_t cycle_len) { int i, j; unsigned char *tx = (unsigned char *)buffer; unsigned char p; size_t *sx; /* Write an indicative pattern that varies and is unique per-cycle */ p = rand() % 256; for (i = j = 0; i < len; i++, j++) { tx[i] = p; if (j % cycle_len == 0) { p = rand() % 256; } } /* force uniqueness by writing an id per-cycle */ for (i = 0; i < len / cycle_len; i++) { j = i * cycle_len; if (j + sizeof(*sx) <= len) { sx = (size_t *)&tx[j]; *sx = i; } } } /** * Verify that the transfer did not corrupt our state at all. */ static void verify_state(AHCIQState *ahci) { int i, j; uint32_t ahci_fingerprint; uint64_t hba_base; uint64_t hba_stored; AHCICommandHeader cmd; ahci_fingerprint = qpci_config_readl(ahci->dev, PCI_VENDOR_ID); g_assert_cmphex(ahci_fingerprint, ==, ahci->fingerprint); /* If we haven't initialized, this is as much as can be validated. */ if (!ahci->hba_base) { return; } hba_base = (uint64_t)qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5); hba_stored = (uint64_t)(uintptr_t)ahci->hba_base; g_assert_cmphex(hba_base, ==, hba_stored); g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP), ==, ahci->cap); g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP2), ==, ahci->cap2); for (i = 0; i < 32; i++) { g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_FB), ==, ahci->port[i].fb); g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_CLB), ==, ahci->port[i].clb); for (j = 0; j < 32; j++) { ahci_get_command_header(ahci, i, j, &cmd); g_assert_cmphex(cmd.prdtl, ==, ahci->port[i].prdtl[j]); g_assert_cmphex(cmd.ctba, ==, ahci->port[i].ctba[j]); } } } static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri) { QOSState *tmp = to->parent; QPCIDevice *dev = to->dev; if (uri == NULL) { uri = "tcp:127.0.0.1:1234"; } /* context will be 'to' after completion. */ migrate(from->parent, to->parent, uri); /* We'd like for the AHCIState objects to still point * to information specific to its specific parent * instance, but otherwise just inherit the new data. */ memcpy(to, from, sizeof(AHCIQState)); to->parent = tmp; to->dev = dev; tmp = from->parent; dev = from->dev; memset(from, 0x00, sizeof(AHCIQState)); from->parent = tmp; from->dev = dev; verify_state(to); } /*** Test Setup & Teardown ***/ /** * Start a Q35 machine and bookmark a handle to the AHCI device. */ static AHCIQState *ahci_vboot(const char *cli, va_list ap) { AHCIQState *s; s = g_malloc0(sizeof(AHCIQState)); s->parent = qtest_pc_vboot(cli, ap); alloc_set_flags(s->parent->alloc, ALLOC_LEAK_ASSERT); /* Verify that we have an AHCI device present. */ s->dev = get_ahci_device(&s->fingerprint); return s; } /** * Start a Q35 machine and bookmark a handle to the AHCI device. */ static AHCIQState *ahci_boot(const char *cli, ...) { AHCIQState *s; va_list ap; if (cli) { va_start(ap, cli); s = ahci_vboot(cli, ap); va_end(ap); } else { cli = "-drive if=none,id=drive0,file=%s,cache=writeback,serial=%s" ",format=qcow2" " -M q35 " "-device ide-hd,drive=drive0 " "-global ide-hd.ver=%s"; s = ahci_boot(cli, tmp_path, "testdisk", "version"); } return s; } /** * Clean up the PCI device, then terminate the QEMU instance. */ static void ahci_shutdown(AHCIQState *ahci) { QOSState *qs = ahci->parent; set_context(qs); ahci_clean_mem(ahci); free_ahci_device(ahci->dev); g_free(ahci); qtest_shutdown(qs); } /** * Boot and fully enable the HBA device. * @see ahci_boot, ahci_pci_enable and ahci_hba_enable. */ static AHCIQState *ahci_boot_and_enable(const char *cli, ...) { AHCIQState *ahci; va_list ap; uint16_t buff[256]; uint8_t port; if (cli) { va_start(ap, cli); ahci = ahci_vboot(cli, ap); va_end(ap); } else { ahci = ahci_boot(NULL); } ahci_pci_enable(ahci); ahci_hba_enable(ahci); /* Initialize test device */ port = ahci_port_select(ahci); ahci_port_clear(ahci, port); ahci_io(ahci, port, CMD_IDENTIFY, &buff, sizeof(buff), 0); return ahci; } /*** Specification Adherence Tests ***/ /** * Implementation for test_pci_spec. Ensures PCI configuration space is sane. */ static void ahci_test_pci_spec(AHCIQState *ahci) { uint8_t datab; uint16_t data; uint32_t datal; /* Most of these bits should start cleared until we turn them on. */ data = qpci_config_readw(ahci->dev, PCI_COMMAND); ASSERT_BIT_CLEAR(data, PCI_COMMAND_MEMORY); ASSERT_BIT_CLEAR(data, PCI_COMMAND_MASTER); ASSERT_BIT_CLEAR(data, PCI_COMMAND_SPECIAL); /* Reserved */ ASSERT_BIT_CLEAR(data, PCI_COMMAND_VGA_PALETTE); /* Reserved */ ASSERT_BIT_CLEAR(data, PCI_COMMAND_PARITY); ASSERT_BIT_CLEAR(data, PCI_COMMAND_WAIT); /* Reserved */ ASSERT_BIT_CLEAR(data, PCI_COMMAND_SERR); ASSERT_BIT_CLEAR(data, PCI_COMMAND_FAST_BACK); ASSERT_BIT_CLEAR(data, PCI_COMMAND_INTX_DISABLE); ASSERT_BIT_CLEAR(data, 0xF800); /* Reserved */ data = qpci_config_readw(ahci->dev, PCI_STATUS); ASSERT_BIT_CLEAR(data, 0x01 | 0x02 | 0x04); /* Reserved */ ASSERT_BIT_CLEAR(data, PCI_STATUS_INTERRUPT); ASSERT_BIT_SET(data, PCI_STATUS_CAP_LIST); /* must be set */ ASSERT_BIT_CLEAR(data, PCI_STATUS_UDF); /* Reserved */ ASSERT_BIT_CLEAR(data, PCI_STATUS_PARITY); ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_TARGET_ABORT); ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_TARGET_ABORT); ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_MASTER_ABORT); ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_SYSTEM_ERROR); ASSERT_BIT_CLEAR(data, PCI_STATUS_DETECTED_PARITY); /* RID occupies the low byte, CCs occupy the high three. */ datal = qpci_config_readl(ahci->dev, PCI_CLASS_REVISION); if (ahci_pedantic) { /* AHCI 1.3 specifies that at-boot, the RID should reset to 0x00, * Though in practice this is likely seldom true. */ ASSERT_BIT_CLEAR(datal, 0xFF); } /* BCC *must* equal 0x01. */ g_assert_cmphex(PCI_BCC(datal), ==, 0x01); if (PCI_SCC(datal) == 0x01) { /* IDE */ ASSERT_BIT_SET(0x80000000, datal); ASSERT_BIT_CLEAR(0x60000000, datal); } else if (PCI_SCC(datal) == 0x04) { /* RAID */ g_assert_cmphex(PCI_PI(datal), ==, 0); } else if (PCI_SCC(datal) == 0x06) { /* AHCI */ g_assert_cmphex(PCI_PI(datal), ==, 0x01); } else { g_assert_not_reached(); } datab = qpci_config_readb(ahci->dev, PCI_CACHE_LINE_SIZE); g_assert_cmphex(datab, ==, 0); datab = qpci_config_readb(ahci->dev, PCI_LATENCY_TIMER); g_assert_cmphex(datab, ==, 0); /* Only the bottom 7 bits must be off. */ datab = qpci_config_readb(ahci->dev, PCI_HEADER_TYPE); ASSERT_BIT_CLEAR(datab, 0x7F); /* BIST is optional, but the low 7 bits must always start off regardless. */ datab = qpci_config_readb(ahci->dev, PCI_BIST); ASSERT_BIT_CLEAR(datab, 0x7F); /* BARS 0-4 do not have a boot spec, but ABAR/BAR5 must be clean. */ datal = qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5); g_assert_cmphex(datal, ==, 0); qpci_config_writel(ahci->dev, PCI_BASE_ADDRESS_5, 0xFFFFFFFF); datal = qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5); /* ABAR must be 32-bit, memory mapped, non-prefetchable and * must be >= 512 bytes. To that end, bits 0-8 must be off. */ ASSERT_BIT_CLEAR(datal, 0xFF); /* Capability list MUST be present, */ datal = qpci_config_readl(ahci->dev, PCI_CAPABILITY_LIST); /* But these bits are reserved. */ ASSERT_BIT_CLEAR(datal, ~0xFF); g_assert_cmphex(datal, !=, 0); /* Check specification adherence for capability extenstions. */ data = qpci_config_readw(ahci->dev, datal); switch (ahci->fingerprint) { case AHCI_INTEL_ICH9: /* Intel ICH9 Family Datasheet 14.1.19 p.550 */ g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_MSI); break; default: /* AHCI 1.3, Section 2.1.14 -- CAP must point to PMCAP. */ g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_PM); } ahci_test_pci_caps(ahci, data, (uint8_t)datal); /* Reserved. */ datal = qpci_config_readl(ahci->dev, PCI_CAPABILITY_LIST + 4); g_assert_cmphex(datal, ==, 0); /* IPIN might vary, but ILINE must be off. */ datab = qpci_config_readb(ahci->dev, PCI_INTERRUPT_LINE); g_assert_cmphex(datab, ==, 0); } /** * Test PCI capabilities for AHCI specification adherence. */ static void ahci_test_pci_caps(AHCIQState *ahci, uint16_t header, uint8_t offset) { uint8_t cid = header & 0xFF; uint8_t next = header >> 8; g_test_message("CID: %02x; next: %02x", cid, next); switch (cid) { case PCI_CAP_ID_PM: ahci_test_pmcap(ahci, offset); break; case PCI_CAP_ID_MSI: ahci_test_msicap(ahci, offset); break; case PCI_CAP_ID_SATA: ahci_test_satacap(ahci, offset); break; default: g_test_message("Unknown CAP 0x%02x", cid); } if (next) { ahci_test_pci_caps(ahci, qpci_config_readw(ahci->dev, next), next); } } /** * Test SATA PCI capabilitity for AHCI specification adherence. */ static void ahci_test_satacap(AHCIQState *ahci, uint8_t offset) { uint16_t dataw; uint32_t datal; g_test_message("Verifying SATACAP"); /* Assert that the SATACAP version is 1.0, And reserved bits are empty. */ dataw = qpci_config_readw(ahci->dev, offset + 2); g_assert_cmphex(dataw, ==, 0x10); /* Grab the SATACR1 register. */ datal = qpci_config_readw(ahci->dev, offset + 4); switch (datal & 0x0F) { case 0x04: /* BAR0 */ case 0x05: /* BAR1 */ case 0x06: case 0x07: case 0x08: case 0x09: /* BAR5 */ case 0x0F: /* Immediately following SATACR1 in PCI config space. */ break; default: /* Invalid BARLOC for the Index Data Pair. */ g_assert_not_reached(); } /* Reserved. */ g_assert_cmphex((datal >> 24), ==, 0x00); } /** * Test MSI PCI capability for AHCI specification adherence. */ static void ahci_test_msicap(AHCIQState *ahci, uint8_t offset) { uint16_t dataw; uint32_t datal; g_test_message("Verifying MSICAP"); dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_FLAGS); ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_ENABLE); ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_QSIZE); ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_RESERVED); datal = qpci_config_readl(ahci->dev, offset + PCI_MSI_ADDRESS_LO); g_assert_cmphex(datal, ==, 0); if (dataw & PCI_MSI_FLAGS_64BIT) { g_test_message("MSICAP is 64bit"); datal = qpci_config_readl(ahci->dev, offset + PCI_MSI_ADDRESS_HI); g_assert_cmphex(datal, ==, 0); dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_DATA_64); g_assert_cmphex(dataw, ==, 0); } else { g_test_message("MSICAP is 32bit"); dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_DATA_32); g_assert_cmphex(dataw, ==, 0); } } /** * Test Power Management PCI capability for AHCI specification adherence. */ static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset) { uint16_t dataw; g_test_message("Verifying PMCAP"); dataw = qpci_config_readw(ahci->dev, offset + PCI_PM_PMC); ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_PME_CLOCK); ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_RESERVED); ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D1); ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D2); dataw = qpci_config_readw(ahci->dev, offset + PCI_PM_CTRL); ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_STATE_MASK); ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_RESERVED); ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SEL_MASK); ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SCALE_MASK); } static void ahci_test_hba_spec(AHCIQState *ahci) { unsigned i; uint32_t reg; uint32_t ports; uint8_t nports_impl; uint8_t maxports; g_assert(ahci != NULL); /* * Note that the AHCI spec does expect the BIOS to set up a few things: * CAP.SSS - Support for staggered spin-up (t/f) * CAP.SMPS - Support for mechanical presence switches (t/f) * PI - Ports Implemented (1-32) * PxCMD.HPCP - Hot Plug Capable Port * PxCMD.MPSP - Mechanical Presence Switch Present * PxCMD.CPD - Cold Presence Detection support * * Additional items are touched if CAP.SSS is on, see AHCI 10.1.1 p.97: * Foreach Port Implemented: * -PxCMD.ST, PxCMD.CR, PxCMD.FRE, PxCMD.FR, PxSCTL.DET are 0 * -PxCLB/U and PxFB/U are set to valid regions in memory * -PxSUD is set to 1. * -PxSSTS.DET is polled for presence; if detected, we continue: * -PxSERR is cleared with 1's. * -If PxTFD.STS.BSY, PxTFD.STS.DRQ, and PxTFD.STS.ERR are all zero, * the device is ready. */ /* 1 CAP - Capabilities Register */ ahci->cap = ahci_rreg(ahci, AHCI_CAP); ASSERT_BIT_CLEAR(ahci->cap, AHCI_CAP_RESERVED); /* 2 GHC - Global Host Control */ reg = ahci_rreg(ahci, AHCI_GHC); ASSERT_BIT_CLEAR(reg, AHCI_GHC_HR); ASSERT_BIT_CLEAR(reg, AHCI_GHC_IE); ASSERT_BIT_CLEAR(reg, AHCI_GHC_MRSM); if (BITSET(ahci->cap, AHCI_CAP_SAM)) { g_test_message("Supports AHCI-Only Mode: GHC_AE is Read-Only."); ASSERT_BIT_SET(reg, AHCI_GHC_AE); } else { g_test_message("Supports AHCI/Legacy mix."); ASSERT_BIT_CLEAR(reg, AHCI_GHC_AE); } /* 3 IS - Interrupt Status */ reg = ahci_rreg(ahci, AHCI_IS); g_assert_cmphex(reg, ==, 0); /* 4 PI - Ports Implemented */ ports = ahci_rreg(ahci, AHCI_PI); /* Ports Implemented must be non-zero. */ g_assert_cmphex(ports, !=, 0); /* Ports Implemented must be <= Number of Ports. */ nports_impl = ctpopl(ports); g_assert_cmpuint(((AHCI_CAP_NP & ahci->cap) + 1), >=, nports_impl); /* Ports must be within the proper range. Given a mapping of SIZE, * 256 bytes are used for global HBA control, and the rest is used * for ports data, at 0x80 bytes each. */ g_assert_cmphex(ahci->barsize, >, 0); maxports = (ahci->barsize - HBA_DATA_REGION_SIZE) / HBA_PORT_DATA_SIZE; /* e.g, 30 ports for 4K of memory. (4096 - 256) / 128 = 30 */ g_assert_cmphex((reg >> maxports), ==, 0); /* 5 AHCI Version */ reg = ahci_rreg(ahci, AHCI_VS); switch (reg) { case AHCI_VERSION_0_95: case AHCI_VERSION_1_0: case AHCI_VERSION_1_1: case AHCI_VERSION_1_2: case AHCI_VERSION_1_3: break; default: g_assert_not_reached(); } /* 6 Command Completion Coalescing Control: depends on CAP.CCCS. */ reg = ahci_rreg(ahci, AHCI_CCCCTL); if (BITSET(ahci->cap, AHCI_CAP_CCCS)) { ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_EN); ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_RESERVED); ASSERT_BIT_SET(reg, AHCI_CCCCTL_CC); ASSERT_BIT_SET(reg, AHCI_CCCCTL_TV); } else { g_assert_cmphex(reg, ==, 0); } /* 7 CCC_PORTS */ reg = ahci_rreg(ahci, AHCI_CCCPORTS); /* Must be zeroes initially regardless of CAP.CCCS */ g_assert_cmphex(reg, ==, 0); /* 8 EM_LOC */ reg = ahci_rreg(ahci, AHCI_EMLOC); if (BITCLR(ahci->cap, AHCI_CAP_EMS)) { g_assert_cmphex(reg, ==, 0); } /* 9 EM_CTL */ reg = ahci_rreg(ahci, AHCI_EMCTL); if (BITSET(ahci->cap, AHCI_CAP_EMS)) { ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_STSMR); ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLTM); ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLRST); ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_RESERVED); } else { g_assert_cmphex(reg, ==, 0); } /* 10 CAP2 -- Capabilities Extended */ ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2); ASSERT_BIT_CLEAR(ahci->cap2, AHCI_CAP2_RESERVED); /* 11 BOHC -- Bios/OS Handoff Control */ reg = ahci_rreg(ahci, AHCI_BOHC); g_assert_cmphex(reg, ==, 0); /* 12 -- 23: Reserved */ g_test_message("Verifying HBA reserved area is empty."); for (i = AHCI_RESERVED; i < AHCI_NVMHCI; ++i) { reg = ahci_rreg(ahci, i); g_assert_cmphex(reg, ==, 0); } /* 24 -- 39: NVMHCI */ if (BITCLR(ahci->cap2, AHCI_CAP2_NVMP)) { g_test_message("Verifying HBA/NVMHCI area is empty."); for (i = AHCI_NVMHCI; i < AHCI_VENDOR; ++i) { reg = ahci_rreg(ahci, i); g_assert_cmphex(reg, ==, 0); } } /* 40 -- 63: Vendor */ g_test_message("Verifying HBA/Vendor area is empty."); for (i = AHCI_VENDOR; i < AHCI_PORTS; ++i) { reg = ahci_rreg(ahci, i); g_assert_cmphex(reg, ==, 0); } /* 64 -- XX: Port Space */ for (i = 0; ports || (i < maxports); ports >>= 1, ++i) { if (BITSET(ports, 0x1)) { g_test_message("Testing port %u for spec", i); ahci_test_port_spec(ahci, i); } else { uint16_t j; uint16_t low = AHCI_PORTS + (32 * i); uint16_t high = AHCI_PORTS + (32 * (i + 1)); g_test_message("Asserting unimplemented port %u " "(reg [%u-%u]) is empty.", i, low, high - 1); for (j = low; j < high; ++j) { reg = ahci_rreg(ahci, j); g_assert_cmphex(reg, ==, 0); } } } } /** * Test the memory space for one port for specification adherence. */ static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port) { uint32_t reg; unsigned i; /* (0) CLB */ reg = ahci_px_rreg(ahci, port, AHCI_PX_CLB); ASSERT_BIT_CLEAR(reg, AHCI_PX_CLB_RESERVED); /* (1) CLBU */ if (BITCLR(ahci->cap, AHCI_CAP_S64A)) { reg = ahci_px_rreg(ahci, port, AHCI_PX_CLBU); g_assert_cmphex(reg, ==, 0); } /* (2) FB */ reg = ahci_px_rreg(ahci, port, AHCI_PX_FB); ASSERT_BIT_CLEAR(reg, AHCI_PX_FB_RESERVED); /* (3) FBU */ if (BITCLR(ahci->cap, AHCI_CAP_S64A)) { reg = ahci_px_rreg(ahci, port, AHCI_PX_FBU); g_assert_cmphex(reg, ==, 0); } /* (4) IS */ reg = ahci_px_rreg(ahci, port, AHCI_PX_IS); g_assert_cmphex(reg, ==, 0); /* (5) IE */ reg = ahci_px_rreg(ahci, port, AHCI_PX_IE); g_assert_cmphex(reg, ==, 0); /* (6) CMD */ reg = ahci_px_rreg(ahci, port, AHCI_PX_CMD); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FRE); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_RESERVED); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CCS); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_PMA); /* And RW only if CAP.SPM */ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_APSTE); /* RW only if CAP2.APST */ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ATAPI); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_DLAE); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ALPE); /* RW only if CAP.SALP */ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ASP); /* RW only if CAP.SALP */ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ICC); /* If CPDetect support does not exist, CPState must be off. */ if (BITCLR(reg, AHCI_PX_CMD_CPD)) { ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CPS); } /* If MPSPresence is not set, MPSState must be off. */ if (BITCLR(reg, AHCI_PX_CMD_MPSP)) { ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS); } /* If we do not support MPS, MPSS and MPSP must be off. */ if (BITCLR(ahci->cap, AHCI_CAP_SMPS)) { ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS); ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSP); } /* If, via CPD or MPSP we detect a drive, HPCP must be on. */ if (BITANY(reg, AHCI_PX_CMD_CPD | AHCI_PX_CMD_MPSP)) { ASSERT_BIT_SET(reg, AHCI_PX_CMD_HPCP); } /* HPCP and ESP cannot both be active. */ g_assert(!BITSET(reg, AHCI_PX_CMD_HPCP | AHCI_PX_CMD_ESP)); /* If CAP.FBSS is not set, FBSCP must not be set. */ if (BITCLR(ahci->cap, AHCI_CAP_FBSS)) { ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FBSCP); } /* (7) RESERVED */ reg = ahci_px_rreg(ahci, port, AHCI_PX_RES1); g_assert_cmphex(reg, ==, 0); /* (8) TFD */ reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD); /* At boot, prior to an FIS being received, the TFD register should be 0x7F, * which breaks down as follows, as seen in AHCI 1.3 sec 3.3.8, p. 27. */ ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR); ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS1); ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_DRQ); ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS2); ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY); ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR); ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_RESERVED); /* (9) SIG */ /* Though AHCI specifies the boot value should be 0xFFFFFFFF, * Even when GHC.ST is zero, the AHCI HBA may receive the initial * D2H register FIS and update the signature asynchronously, * so we cannot expect a value here. AHCI 1.3, sec 3.3.9, pp 27-28 */ /* (10) SSTS / SCR0: SStatus */ reg = ahci_px_rreg(ahci, port, AHCI_PX_SSTS); ASSERT_BIT_CLEAR(reg, AHCI_PX_SSTS_RESERVED); /* Even though the register should be 0 at boot, it is asynchronous and * prone to change, so we cannot test any well known value. */ /* (11) SCTL / SCR2: SControl */ reg = ahci_px_rreg(ahci, port, AHCI_PX_SCTL); g_assert_cmphex(reg, ==, 0); /* (12) SERR / SCR1: SError */ reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR); g_assert_cmphex(reg, ==, 0); /* (13) SACT / SCR3: SActive */ reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT); g_assert_cmphex(reg, ==, 0); /* (14) CI */ reg = ahci_px_rreg(ahci, port, AHCI_PX_CI); g_assert_cmphex(reg, ==, 0); /* (15) SNTF */ reg = ahci_px_rreg(ahci, port, AHCI_PX_SNTF); g_assert_cmphex(reg, ==, 0); /* (16) FBS */ reg = ahci_px_rreg(ahci, port, AHCI_PX_FBS); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_EN); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEC); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_SDE); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEV); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DWE); ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_RESERVED); if (BITSET(ahci->cap, AHCI_CAP_FBSS)) { /* if Port-Multiplier FIS-based switching avail, ADO must >= 2 */ g_assert((reg & AHCI_PX_FBS_ADO) >> ctzl(AHCI_PX_FBS_ADO) >= 2); } /* [17 -- 27] RESERVED */ for (i = AHCI_PX_RES2; i < AHCI_PX_VS; ++i) { reg = ahci_px_rreg(ahci, port, i); g_assert_cmphex(reg, ==, 0); } /* [28 -- 31] Vendor-Specific */ for (i = AHCI_PX_VS; i < 32; ++i) { reg = ahci_px_rreg(ahci, port, i); if (reg) { g_test_message("INFO: Vendor register %u non-empty", i); } } } /** * Utilizing an initialized AHCI HBA, issue an IDENTIFY command to the first * device we see, then read and check the response. */ static void ahci_test_identify(AHCIQState *ahci) { uint16_t buff[256]; unsigned px; int rc; uint16_t sect_size; const size_t buffsize = 512; g_assert(ahci != NULL); /** * This serves as a bit of a tutorial on AHCI device programming: * * (1) Create a data buffer for the IDENTIFY response to be sent to * (2) Create a Command Table buffer, where we will store the * command and PRDT (Physical Region Descriptor Table) * (3) Construct an FIS host-to-device command structure, and write it to * the top of the Command Table buffer. * (4) Create one or more Physical Region Descriptors (PRDs) that describe * a location in memory where data may be stored/retrieved. * (5) Write these PRDTs to the bottom (offset 0x80) of the Command Table. * (6) Each AHCI port has up to 32 command slots. Each slot contains a * header that points to a Command Table buffer. Pick an unused slot * and update it to point to the Command Table we have built. * (7) Now: Command #n points to our Command Table, and our Command Table * contains the FIS (that describes our command) and the PRDTL, which * describes our buffer. * (8) We inform the HBA via PxCI (Command Issue) that the command in slot * #n is ready for processing. */ /* Pick the first implemented and running port */ px = ahci_port_select(ahci); g_test_message("Selected port %u for test", px); /* Clear out the FIS Receive area and any pending interrupts. */ ahci_port_clear(ahci, px); /* "Read" 512 bytes using CMD_IDENTIFY into the host buffer. */ ahci_io(ahci, px, CMD_IDENTIFY, &buff, buffsize, 0); /* Check serial number/version in the buffer */ /* NB: IDENTIFY strings are packed in 16bit little endian chunks. * Since we copy byte-for-byte in ahci-test, on both LE and BE, we need to * unchunk this data. By contrast, ide-test copies 2 bytes at a time, and * as a consequence, only needs to unchunk the data on LE machines. */ string_bswap16(&buff[10], 20); rc = memcmp(&buff[10], "testdisk ", 20); g_assert_cmphex(rc, ==, 0); string_bswap16(&buff[23], 8); rc = memcmp(&buff[23], "version ", 8); g_assert_cmphex(rc, ==, 0); sect_size = le16_to_cpu(*((uint16_t *)(&buff[5]))); g_assert_cmphex(sect_size, ==, AHCI_SECTOR_SIZE); } static void ahci_test_io_rw_simple(AHCIQState *ahci, unsigned bufsize, uint64_t sector, uint8_t read_cmd, uint8_t write_cmd) { uint64_t ptr; uint8_t port; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); g_assert(ahci != NULL); /* Pick the first running port and clear it. */ port = ahci_port_select(ahci); ahci_port_clear(ahci, port); /*** Create pattern and transfer to guest ***/ /* Data buffer in the guest */ ptr = ahci_alloc(ahci, bufsize); g_assert(ptr); /* Write some indicative pattern to our buffer. */ generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE); bufwrite(ptr, tx, bufsize); /* Write this buffer to disk, then read it back to the DMA buffer. */ ahci_guest_io(ahci, port, write_cmd, ptr, bufsize, sector); qmemset(ptr, 0x00, bufsize); ahci_guest_io(ahci, port, read_cmd, ptr, bufsize, sector); /*** Read back the Data ***/ bufread(ptr, rx, bufsize); g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0); ahci_free(ahci, ptr); g_free(tx); g_free(rx); } static uint8_t ahci_test_nondata(AHCIQState *ahci, uint8_t ide_cmd) { uint8_t port; AHCICommand *cmd; /* Sanitize */ port = ahci_port_select(ahci); ahci_port_clear(ahci, port); /* Issue Command */ cmd = ahci_command_create(ide_cmd); ahci_command_commit(ahci, cmd, port); ahci_command_issue(ahci, cmd); ahci_command_verify(ahci, cmd); ahci_command_free(cmd); return port; } static void ahci_test_flush(AHCIQState *ahci) { ahci_test_nondata(ahci, CMD_FLUSH_CACHE); } static void ahci_test_max(AHCIQState *ahci) { RegD2HFIS *d2h = g_malloc0(0x20); uint64_t nsect; uint8_t port; uint8_t cmd; uint64_t config_sect = TEST_IMAGE_SECTORS - 1; if (config_sect > 0xFFFFFF) { cmd = CMD_READ_MAX_EXT; } else { cmd = CMD_READ_MAX; } port = ahci_test_nondata(ahci, cmd); memread(ahci->port[port].fb + 0x40, d2h, 0x20); nsect = (uint64_t)d2h->lba_hi[2] << 40 | (uint64_t)d2h->lba_hi[1] << 32 | (uint64_t)d2h->lba_hi[0] << 24 | (uint64_t)d2h->lba_lo[2] << 16 | (uint64_t)d2h->lba_lo[1] << 8 | (uint64_t)d2h->lba_lo[0]; g_assert_cmphex(nsect, ==, config_sect); g_free(d2h); } /******************************************************************************/ /* Test Interfaces */ /******************************************************************************/ /** * Basic sanity test to boot a machine, find an AHCI device, and shutdown. */ static void test_sanity(void) { AHCIQState *ahci; ahci = ahci_boot(NULL); ahci_shutdown(ahci); } /** * Ensure that the PCI configuration space for the AHCI device is in-line with * the AHCI 1.3 specification for initial values. */ static void test_pci_spec(void) { AHCIQState *ahci; ahci = ahci_boot(NULL); ahci_test_pci_spec(ahci); ahci_shutdown(ahci); } /** * Engage the PCI AHCI device and sanity check the response. * Perform additional PCI config space bringup for the HBA. */ static void test_pci_enable(void) { AHCIQState *ahci; ahci = ahci_boot(NULL); ahci_pci_enable(ahci); ahci_shutdown(ahci); } /** * Investigate the memory mapped regions of the HBA, * and test them for AHCI specification adherence. */ static void test_hba_spec(void) { AHCIQState *ahci; ahci = ahci_boot(NULL); ahci_pci_enable(ahci); ahci_test_hba_spec(ahci); ahci_shutdown(ahci); } /** * Engage the HBA functionality of the AHCI PCI device, * and bring it into a functional idle state. */ static void test_hba_enable(void) { AHCIQState *ahci; ahci = ahci_boot(NULL); ahci_pci_enable(ahci); ahci_hba_enable(ahci); ahci_shutdown(ahci); } /** * Bring up the device and issue an IDENTIFY command. * Inspect the state of the HBA device and the data returned. */ static void test_identify(void) { AHCIQState *ahci; ahci = ahci_boot_and_enable(NULL); ahci_test_identify(ahci); ahci_shutdown(ahci); } /** * Fragmented DMA test: Perform a standard 4K DMA read/write * test, but make sure the physical regions are fragmented to * be very small, each just 32 bytes, to see how AHCI performs * with chunks defined to be much less than a sector. */ static void test_dma_fragmented(void) { AHCIQState *ahci; AHCICommand *cmd; uint8_t px; size_t bufsize = 4096; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); uint64_t ptr; ahci = ahci_boot_and_enable(NULL); px = ahci_port_select(ahci); ahci_port_clear(ahci, px); /* create pattern */ generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE); /* Create a DMA buffer in guest memory, and write our pattern to it. */ ptr = guest_alloc(ahci->parent->alloc, bufsize); g_assert(ptr); bufwrite(ptr, tx, bufsize); cmd = ahci_command_create(CMD_WRITE_DMA); ahci_command_adjust(cmd, 0, ptr, bufsize, 32); ahci_command_commit(ahci, cmd, px); ahci_command_issue(ahci, cmd); ahci_command_verify(ahci, cmd); g_free(cmd); cmd = ahci_command_create(CMD_READ_DMA); ahci_command_adjust(cmd, 0, ptr, bufsize, 32); ahci_command_commit(ahci, cmd, px); ahci_command_issue(ahci, cmd); ahci_command_verify(ahci, cmd); g_free(cmd); /* Read back the guest's receive buffer into local memory */ bufread(ptr, rx, bufsize); guest_free(ahci->parent->alloc, ptr); g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0); ahci_shutdown(ahci); g_free(rx); g_free(tx); } static void test_flush(void) { AHCIQState *ahci; ahci = ahci_boot_and_enable(NULL); ahci_test_flush(ahci); ahci_shutdown(ahci); } static void test_flush_retry(void) { AHCIQState *ahci; AHCICommand *cmd; uint8_t port; const char *s; prepare_blkdebug_script(debug_path, "flush_to_disk"); ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," "format=qcow2,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, tmp_path); /* Issue Flush Command and wait for error */ port = ahci_port_select(ahci); ahci_port_clear(ahci, port); cmd = ahci_command_create(CMD_FLUSH_CACHE); ahci_command_commit(ahci, cmd, port); ahci_command_issue_async(ahci, cmd); qmp_eventwait("STOP"); /* Complete the command */ s = "{'execute':'cont' }"; qmp_async(s); qmp_eventwait("RESUME"); ahci_command_wait(ahci, cmd); ahci_command_verify(ahci, cmd); ahci_command_free(cmd); ahci_shutdown(ahci); } /** * Basic sanity test to boot a machine, find an AHCI device, and shutdown. */ static void test_migrate_sanity(void) { AHCIQState *src, *dst; const char *uri = "tcp:127.0.0.1:1234"; src = ahci_boot("-m 1024 -M q35 " "-hda %s ", tmp_path); dst = ahci_boot("-m 1024 -M q35 " "-hda %s " "-incoming %s", tmp_path, uri); ahci_migrate(src, dst, uri); ahci_shutdown(src); ahci_shutdown(dst); } /** * DMA Migration test: Write a pattern, migrate, then read. */ static void test_migrate_dma(void) { AHCIQState *src, *dst; uint8_t px; size_t bufsize = 4096; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); unsigned i; const char *uri = "tcp:127.0.0.1:1234"; src = ahci_boot_and_enable("-m 1024 -M q35 " "-hda %s ", tmp_path); dst = ahci_boot("-m 1024 -M q35 " "-hda %s " "-incoming %s", tmp_path, uri); set_context(src->parent); /* initialize */ px = ahci_port_select(src); ahci_port_clear(src, px); /* create pattern */ for (i = 0; i < bufsize; i++) { tx[i] = (bufsize - i); } /* Write, migrate, then read. */ ahci_io(src, px, CMD_WRITE_DMA, tx, bufsize, 0); ahci_migrate(src, dst, uri); ahci_io(dst, px, CMD_READ_DMA, rx, bufsize, 0); /* Verify pattern */ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0); ahci_shutdown(src); ahci_shutdown(dst); g_free(rx); g_free(tx); } /** * DMA Error Test * * Simulate an error on first write, Try to write a pattern, * Confirm the VM has stopped, resume the VM, verify command * has completed, then read back the data and verify. */ static void test_halted_dma(void) { AHCIQState *ahci; uint8_t port; size_t bufsize = 4096; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); unsigned i; uint64_t ptr; AHCICommand *cmd; prepare_blkdebug_script(debug_path, "write_aio"); ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," "format=qcow2,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, tmp_path); /* Initialize and prepare */ port = ahci_port_select(ahci); ahci_port_clear(ahci, port); for (i = 0; i < bufsize; i++) { tx[i] = (bufsize - i); } /* create DMA source buffer and write pattern */ ptr = ahci_alloc(ahci, bufsize); g_assert(ptr); memwrite(ptr, tx, bufsize); /* Attempt to write (and fail) */ cmd = ahci_guest_io_halt(ahci, port, CMD_WRITE_DMA, ptr, bufsize, 0); /* Attempt to resume the command */ ahci_guest_io_resume(ahci, cmd); ahci_free(ahci, ptr); /* Read back and verify */ ahci_io(ahci, port, CMD_READ_DMA, rx, bufsize, 0); g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0); /* Cleanup and go home */ ahci_shutdown(ahci); g_free(rx); g_free(tx); } /** * DMA Error Migration Test * * Simulate an error on first write, Try to write a pattern, * Confirm the VM has stopped, migrate, resume the VM, * verify command has completed, then read back the data and verify. */ static void test_migrate_halted_dma(void) { AHCIQState *src, *dst; uint8_t port; size_t bufsize = 4096; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); unsigned i; uint64_t ptr; AHCICommand *cmd; const char *uri = "tcp:127.0.0.1:1234"; prepare_blkdebug_script(debug_path, "write_aio"); src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," "format=qcow2,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, tmp_path); dst = ahci_boot("-drive file=%s,if=none,id=drive0," "format=qcow2,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 " "-incoming %s", tmp_path, uri); set_context(src->parent); /* Initialize and prepare */ port = ahci_port_select(src); ahci_port_clear(src, port); for (i = 0; i < bufsize; i++) { tx[i] = (bufsize - i); } /* create DMA source buffer and write pattern */ ptr = ahci_alloc(src, bufsize); g_assert(ptr); memwrite(ptr, tx, bufsize); /* Write, trigger the VM to stop, migrate, then resume. */ cmd = ahci_guest_io_halt(src, port, CMD_WRITE_DMA, ptr, bufsize, 0); ahci_migrate(src, dst, uri); ahci_guest_io_resume(dst, cmd); ahci_free(dst, ptr); /* Read back */ ahci_io(dst, port, CMD_READ_DMA, rx, bufsize, 0); /* Verify TX and RX are identical */ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0); /* Cleanup and go home. */ ahci_shutdown(src); ahci_shutdown(dst); g_free(rx); g_free(tx); } /** * Migration test: Try to flush, migrate, then resume. */ static void test_flush_migrate(void) { AHCIQState *src, *dst; AHCICommand *cmd; uint8_t px; const char *s; const char *uri = "tcp:127.0.0.1:1234"; prepare_blkdebug_script(debug_path, "flush_to_disk"); src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," "cache=writeback,rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, tmp_path); dst = ahci_boot("-drive file=%s,if=none,id=drive0," "cache=writeback,rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 " "-incoming %s", tmp_path, uri); set_context(src->parent); /* Issue Flush Command */ px = ahci_port_select(src); ahci_port_clear(src, px); cmd = ahci_command_create(CMD_FLUSH_CACHE); ahci_command_commit(src, cmd, px); ahci_command_issue_async(src, cmd); qmp_eventwait("STOP"); /* Migrate over */ ahci_migrate(src, dst, uri); /* Complete the command */ s = "{'execute':'cont' }"; qmp_async(s); qmp_eventwait("RESUME"); ahci_command_wait(dst, cmd); ahci_command_verify(dst, cmd); ahci_command_free(cmd); ahci_shutdown(src); ahci_shutdown(dst); } static void test_max(void) { AHCIQState *ahci; ahci = ahci_boot_and_enable(NULL); ahci_test_max(ahci); ahci_shutdown(ahci); } static void test_reset(void) { AHCIQState *ahci; int i; ahci = ahci_boot(NULL); ahci_test_pci_spec(ahci); ahci_pci_enable(ahci); for (i = 0; i < 2; i++) { ahci_test_hba_spec(ahci); ahci_hba_enable(ahci); ahci_test_identify(ahci); ahci_test_io_rw_simple(ahci, 4096, 0, CMD_READ_DMA_EXT, CMD_WRITE_DMA_EXT); ahci_set(ahci, AHCI_GHC, AHCI_GHC_HR); ahci_clean_mem(ahci); } ahci_shutdown(ahci); } /******************************************************************************/ /* AHCI I/O Test Matrix Definitions */ enum BuffLen { LEN_BEGIN = 0, LEN_SIMPLE = LEN_BEGIN, LEN_DOUBLE, LEN_LONG, LEN_SHORT, NUM_LENGTHS }; static const char *buff_len_str[NUM_LENGTHS] = { "simple", "double", "long", "short" }; enum AddrMode { ADDR_MODE_BEGIN = 0, ADDR_MODE_LBA28 = ADDR_MODE_BEGIN, ADDR_MODE_LBA48, NUM_ADDR_MODES }; static const char *addr_mode_str[NUM_ADDR_MODES] = { "lba28", "lba48" }; enum IOMode { MODE_BEGIN = 0, MODE_PIO = MODE_BEGIN, MODE_DMA, NUM_MODES }; static const char *io_mode_str[NUM_MODES] = { "pio", "dma" }; enum IOOps { IO_BEGIN = 0, IO_READ = IO_BEGIN, IO_WRITE, NUM_IO_OPS }; enum OffsetType { OFFSET_BEGIN = 0, OFFSET_ZERO = OFFSET_BEGIN, OFFSET_LOW, OFFSET_HIGH, NUM_OFFSETS }; static const char *offset_str[NUM_OFFSETS] = { "zero", "low", "high" }; typedef struct AHCIIOTestOptions { enum BuffLen length; enum AddrMode address_type; enum IOMode io_type; enum OffsetType offset; } AHCIIOTestOptions; static uint64_t offset_sector(enum OffsetType ofst, enum AddrMode addr_type, uint64_t buffsize) { uint64_t ceil; uint64_t nsectors; switch (ofst) { case OFFSET_ZERO: return 0; case OFFSET_LOW: return 1; case OFFSET_HIGH: ceil = (addr_type == ADDR_MODE_LBA28) ? 0xfffffff : 0xffffffffffff; ceil = MIN(ceil, TEST_IMAGE_SECTORS - 1); nsectors = buffsize / AHCI_SECTOR_SIZE; return ceil - nsectors + 1; default: g_assert_not_reached(); } } /** * Table of possible I/O ATA commands given a set of enumerations. */ static const uint8_t io_cmds[NUM_MODES][NUM_ADDR_MODES][NUM_IO_OPS] = { [MODE_PIO] = { [ADDR_MODE_LBA28] = { [IO_READ] = CMD_READ_PIO, [IO_WRITE] = CMD_WRITE_PIO }, [ADDR_MODE_LBA48] = { [IO_READ] = CMD_READ_PIO_EXT, [IO_WRITE] = CMD_WRITE_PIO_EXT } }, [MODE_DMA] = { [ADDR_MODE_LBA28] = { [IO_READ] = CMD_READ_DMA, [IO_WRITE] = CMD_WRITE_DMA }, [ADDR_MODE_LBA48] = { [IO_READ] = CMD_READ_DMA_EXT, [IO_WRITE] = CMD_WRITE_DMA_EXT } } }; /** * Test a Read/Write pattern using various commands, addressing modes, * transfer modes, and buffer sizes. */ static void test_io_rw_interface(enum AddrMode lba48, enum IOMode dma, unsigned bufsize, uint64_t sector) { AHCIQState *ahci; ahci = ahci_boot_and_enable(NULL); ahci_test_io_rw_simple(ahci, bufsize, sector, io_cmds[dma][lba48][IO_READ], io_cmds[dma][lba48][IO_WRITE]); ahci_shutdown(ahci); } /** * Demultiplex the test data and invoke the actual test routine. */ static void test_io_interface(gconstpointer opaque) { AHCIIOTestOptions *opts = (AHCIIOTestOptions *)opaque; unsigned bufsize; uint64_t sector; switch (opts->length) { case LEN_SIMPLE: bufsize = 4096; break; case LEN_DOUBLE: bufsize = 8192; break; case LEN_LONG: bufsize = 4096 * 64; break; case LEN_SHORT: bufsize = 512; break; default: g_assert_not_reached(); } sector = offset_sector(opts->offset, opts->address_type, bufsize); test_io_rw_interface(opts->address_type, opts->io_type, bufsize, sector); g_free(opts); return; } static void create_ahci_io_test(enum IOMode type, enum AddrMode addr, enum BuffLen len, enum OffsetType offset) { char *name; AHCIIOTestOptions *opts = g_malloc(sizeof(AHCIIOTestOptions)); opts->length = len; opts->address_type = addr; opts->io_type = type; opts->offset = offset; name = g_strdup_printf("ahci/io/%s/%s/%s/%s", io_mode_str[type], addr_mode_str[addr], buff_len_str[len], offset_str[offset]); qtest_add_data_func(name, opts, test_io_interface); g_free(name); } /******************************************************************************/ int main(int argc, char **argv) { const char *arch; int ret; int fd; int c; int i, j, k, m; static struct option long_options[] = { {"pedantic", no_argument, 0, 'p' }, {0, 0, 0, 0}, }; /* Should be first to utilize g_test functionality, So we can see errors. */ g_test_init(&argc, &argv, NULL); while (1) { c = getopt_long(argc, argv, "", long_options, NULL); if (c == -1) { break; } switch (c) { case -1: break; case 'p': ahci_pedantic = 1; break; default: fprintf(stderr, "Unrecognized ahci_test option.\n"); g_assert_not_reached(); } } /* Check architecture */ arch = qtest_get_arch(); if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) { g_test_message("Skipping test for non-x86"); return 0; } /* Create a temporary qcow2 image */ close(mkstemp(tmp_path)); mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB); /* Create temporary blkdebug instructions */ fd = mkstemp(debug_path); g_assert(fd >= 0); close(fd); /* Run the tests */ qtest_add_func("/ahci/sanity", test_sanity); qtest_add_func("/ahci/pci_spec", test_pci_spec); qtest_add_func("/ahci/pci_enable", test_pci_enable); qtest_add_func("/ahci/hba_spec", test_hba_spec); qtest_add_func("/ahci/hba_enable", test_hba_enable); qtest_add_func("/ahci/identify", test_identify); for (i = MODE_BEGIN; i < NUM_MODES; i++) { for (j = ADDR_MODE_BEGIN; j < NUM_ADDR_MODES; j++) { for (k = LEN_BEGIN; k < NUM_LENGTHS; k++) { for (m = OFFSET_BEGIN; m < NUM_OFFSETS; m++) { create_ahci_io_test(i, j, k, m); } } } } qtest_add_func("/ahci/io/dma/lba28/fragmented", test_dma_fragmented); qtest_add_func("/ahci/flush/simple", test_flush); qtest_add_func("/ahci/flush/retry", test_flush_retry); qtest_add_func("/ahci/flush/migrate", test_flush_migrate); qtest_add_func("/ahci/migrate/sanity", test_migrate_sanity); qtest_add_func("/ahci/migrate/dma/simple", test_migrate_dma); qtest_add_func("/ahci/io/dma/lba28/retry", test_halted_dma); qtest_add_func("/ahci/migrate/dma/halted", test_migrate_halted_dma); qtest_add_func("/ahci/max", test_max); qtest_add_func("/ahci/reset", test_reset); ret = g_test_run(); /* Cleanup */ unlink(tmp_path); unlink(debug_path); return ret; }