/* * QEMU USB API * * Copyright (c) 2005 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "block.h" #include "qdev.h" #include "qemu-queue.h" /* Constants related to the USB / PCI interaction */ #define USB_SBRN 0x60 /* Serial Bus Release Number Register */ #define USB_RELEASE_1 0x10 /* USB 1.0 */ #define USB_RELEASE_2 0x20 /* USB 2.0 */ #define USB_RELEASE_3 0x30 /* USB 3.0 */ #define USB_TOKEN_SETUP 0x2d #define USB_TOKEN_IN 0x69 /* device -> host */ #define USB_TOKEN_OUT 0xe1 /* host -> device */ /* specific usb messages, also sent in the 'pid' parameter */ #define USB_MSG_ATTACH 0x100 #define USB_MSG_DETACH 0x101 #define USB_MSG_RESET 0x102 #define USB_RET_NODEV (-1) #define USB_RET_NAK (-2) #define USB_RET_STALL (-3) #define USB_RET_BABBLE (-4) #define USB_RET_ASYNC (-5) #define USB_SPEED_LOW 0 #define USB_SPEED_FULL 1 #define USB_SPEED_HIGH 2 #define USB_SPEED_SUPER 3 #define USB_SPEED_MASK_LOW (1 << USB_SPEED_LOW) #define USB_SPEED_MASK_FULL (1 << USB_SPEED_FULL) #define USB_SPEED_MASK_HIGH (1 << USB_SPEED_HIGH) #define USB_SPEED_MASK_SUPER (1 << USB_SPEED_SUPER) #define USB_STATE_NOTATTACHED 0 #define USB_STATE_ATTACHED 1 //#define USB_STATE_POWERED 2 #define USB_STATE_DEFAULT 3 //#define USB_STATE_ADDRESS 4 //#define USB_STATE_CONFIGURED 5 #define USB_STATE_SUSPENDED 6 #define USB_CLASS_AUDIO 1 #define USB_CLASS_COMM 2 #define USB_CLASS_HID 3 #define USB_CLASS_PHYSICAL 5 #define USB_CLASS_STILL_IMAGE 6 #define USB_CLASS_PRINTER 7 #define USB_CLASS_MASS_STORAGE 8 #define USB_CLASS_HUB 9 #define USB_CLASS_CDC_DATA 0x0a #define USB_CLASS_CSCID 0x0b #define USB_CLASS_CONTENT_SEC 0x0d #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff #define USB_DIR_OUT 0 #define USB_DIR_IN 0x80 #define USB_TYPE_MASK (0x03 << 5) #define USB_TYPE_STANDARD (0x00 << 5) #define USB_TYPE_CLASS (0x01 << 5) #define USB_TYPE_VENDOR (0x02 << 5) #define USB_TYPE_RESERVED (0x03 << 5) #define USB_RECIP_MASK 0x1f #define USB_RECIP_DEVICE 0x00 #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 #define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) #define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) #define InterfaceRequest \ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) #define InterfaceOutRequest \ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) #define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) #define EndpointOutRequest \ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) #define ClassInterfaceRequest \ ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8) #define ClassInterfaceOutRequest \ ((USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8) #define USB_REQ_GET_STATUS 0x00 #define USB_REQ_CLEAR_FEATURE 0x01 #define USB_REQ_SET_FEATURE 0x03 #define USB_REQ_SET_ADDRESS 0x05 #define USB_REQ_GET_DESCRIPTOR 0x06 #define USB_REQ_SET_DESCRIPTOR 0x07 #define USB_REQ_GET_CONFIGURATION 0x08 #define USB_REQ_SET_CONFIGURATION 0x09 #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C #define USB_DEVICE_SELF_POWERED 0 #define USB_DEVICE_REMOTE_WAKEUP 1 #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 #define USB_DT_STRING 0x03 #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 #define USB_DT_DEVICE_QUALIFIER 0x06 #define USB_DT_OTHER_SPEED_CONFIG 0x07 #define USB_DT_DEBUG 0x0A #define USB_DT_INTERFACE_ASSOC 0x0B #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 #define USB_ENDPOINT_XFER_BULK 2 #define USB_ENDPOINT_XFER_INT 3 typedef struct USBBus USBBus; typedef struct USBBusOps USBBusOps; typedef struct USBPort USBPort; typedef struct USBDevice USBDevice; typedef struct USBDeviceInfo USBDeviceInfo; typedef struct USBPacket USBPacket; typedef struct USBDesc USBDesc; typedef struct USBDescID USBDescID; typedef struct USBDescDevice USBDescDevice; typedef struct USBDescConfig USBDescConfig; typedef struct USBDescIfaceAssoc USBDescIfaceAssoc; typedef struct USBDescIface USBDescIface; typedef struct USBDescEndpoint USBDescEndpoint; typedef struct USBDescOther USBDescOther; typedef struct USBDescString USBDescString; struct USBDescString { uint8_t index; char *str; QLIST_ENTRY(USBDescString) next; }; /* definition of a USB device */ struct USBDevice { DeviceState qdev; USBDeviceInfo *info; USBPort *port; char *port_path; void *opaque; /* Actual connected speed */ int speed; /* Supported speeds, not in info because it may be variable (hostdevs) */ int speedmask; uint8_t addr; char product_desc[32]; int auto_attach; int attached; int32_t state; uint8_t setup_buf[8]; uint8_t data_buf[4096]; int32_t remote_wakeup; int32_t setup_state; int32_t setup_len; int32_t setup_index; QLIST_HEAD(, USBDescString) strings; const USBDescDevice *device; const USBDescConfig *config; }; struct USBDeviceInfo { DeviceInfo qdev; int (*init)(USBDevice *dev); /* * Process USB packet. * Called by the HC (Host Controller). * * Returns length of the transaction * or one of the USB_RET_XXX codes. */ int (*handle_packet)(USBDevice *dev, USBPacket *p); /* * Called when a packet is canceled. */ void (*cancel_packet)(USBDevice *dev, USBPacket *p); /* * Called when device is destroyed. */ void (*handle_destroy)(USBDevice *dev); /* * Attach the device */ void (*handle_attach)(USBDevice *dev); /* * Reset the device */ void (*handle_reset)(USBDevice *dev); /* * Process control request. * Called from handle_packet(). * * Returns length or one of the USB_RET_ codes. */ int (*handle_control)(USBDevice *dev, USBPacket *p, int request, int value, int index, int length, uint8_t *data); /* * Process data transfers (both BULK and ISOC). * Called from handle_packet(). * * Returns length or one of the USB_RET_ codes. */ int (*handle_data)(USBDevice *dev, USBPacket *p); const char *product_desc; const USBDesc *usb_desc; /* handle legacy -usbdevice command line options */ const char *usbdevice_name; USBDevice *(*usbdevice_init)(const char *params); }; typedef struct USBPortOps { void (*attach)(USBPort *port); void (*detach)(USBPort *port); void (*wakeup)(USBPort *port); /* * Note that port->dev will be different then the device from which * the packet originated when a hub is involved, if you want the orginating * device use p->owner */ void (*complete)(USBPort *port, USBPacket *p); } USBPortOps; /* USB port on which a device can be connected */ struct USBPort { USBDevice *dev; int speedmask; char path[16]; USBPortOps *ops; void *opaque; int index; /* internal port index, may be used with the opaque */ QTAILQ_ENTRY(USBPort) next; }; typedef void USBCallback(USBPacket * packet, void *opaque); /* Structure used to hold information about an active USB packet. */ struct USBPacket { /* Data fields for use by the driver. */ int pid; uint8_t devaddr; uint8_t devep; uint8_t *data; int len; /* Internal use by the USB layer. */ USBDevice *owner; }; int usb_handle_packet(USBDevice *dev, USBPacket *p); void usb_packet_complete(USBDevice *dev, USBPacket *p); void usb_cancel_packet(USBPacket * p); void usb_attach(USBPort *port, USBDevice *dev); void usb_wakeup(USBDevice *dev); int usb_generic_handle_packet(USBDevice *s, USBPacket *p); void usb_generic_async_ctrl_complete(USBDevice *s, USBPacket *p); int set_usb_string(uint8_t *buf, const char *str); void usb_send_msg(USBDevice *dev, int msg); /* usb-linux.c */ USBDevice *usb_host_device_open(const char *devname); int usb_host_device_close(const char *devname); void usb_host_info(Monitor *mon); /* usb-hid.c */ void usb_hid_datain_cb(USBDevice *dev, void *opaque, void (*datain)(void *)); /* usb-bt.c */ USBDevice *usb_bt_init(HCIInfo *hci); /* usb ports of the VM */ #define VM_USB_HUB_SIZE 8 /* usb-musb.c */ enum musb_irq_source_e { musb_irq_suspend = 0, musb_irq_resume, musb_irq_rst_babble, musb_irq_sof, musb_irq_connect, musb_irq_disconnect, musb_irq_vbus_request, musb_irq_vbus_error, musb_irq_rx, musb_irq_tx, musb_set_vbus, musb_set_session, __musb_irq_max, }; typedef struct MUSBState MUSBState; MUSBState *musb_init(qemu_irq *irqs); uint32_t musb_core_intr_get(MUSBState *s); void musb_core_intr_clear(MUSBState *s, uint32_t mask); void musb_set_size(MUSBState *s, int epnum, int size, int is_tx); /* usb-bus.c */ struct USBBus { BusState qbus; USBBusOps *ops; int busnr; int nfree; int nused; QTAILQ_HEAD(, USBPort) free; QTAILQ_HEAD(, USBPort) used; QTAILQ_ENTRY(USBBus) next; }; struct USBBusOps { int (*register_companion)(USBBus *bus, USBPort *ports[], uint32_t portcount, uint32_t firstport); void (*device_destroy)(USBBus *bus, USBDevice *dev); }; void usb_bus_new(USBBus *bus, USBBusOps *ops, DeviceState *host); USBBus *usb_bus_find(int busnr); void usb_qdev_register(USBDeviceInfo *info); void usb_qdev_register_many(USBDeviceInfo *info); USBDevice *usb_create(USBBus *bus, const char *name); USBDevice *usb_create_simple(USBBus *bus, const char *name); USBDevice *usbdevice_create(const char *cmdline); void usb_register_port(USBBus *bus, USBPort *port, void *opaque, int index, USBPortOps *ops, int speedmask); int usb_register_companion(const char *masterbus, USBPort *ports[], uint32_t portcount, uint32_t firstport, void *opaque, USBPortOps *ops, int speedmask); void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr); void usb_unregister_port(USBBus *bus, USBPort *port); int usb_device_attach(USBDevice *dev); int usb_device_detach(USBDevice *dev); int usb_device_delete_addr(int busnr, int addr); static inline USBBus *usb_bus_from_device(USBDevice *d) { return DO_UPCAST(USBBus, qbus, d->qdev.parent_bus); }