/* * QEMU m68k Macintosh VIA device support * * Copyright (c) 2011-2018 Laurent Vivier * Copyright (c) 2018 Mark Cave-Ayland * * Some parts from hw/misc/macio/cuda.c * * Copyright (c) 2004-2007 Fabrice Bellard * Copyright (c) 2007 Jocelyn Mayer * * some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ #include "qemu/osdep.h" #include "qemu-common.h" #include "migration/vmstate.h" #include "hw/sysbus.h" #include "hw/irq.h" #include "qemu/timer.h" #include "hw/misc/mac_via.h" #include "hw/misc/mos6522.h" #include "hw/input/adb.h" #include "sysemu/runstate.h" #include "qapi/error.h" #include "qemu/cutils.h" #include "hw/qdev-properties.h" #include "sysemu/block-backend.h" #include "trace.h" #include "qemu/log.h" /* * VIAs: There are two in every machine, */ #define VIA_SIZE (0x2000) /* * Not all of these are true post MacII I think. * CSA: probably the ones CHRP marks as 'unused' change purposes * when the IWM becomes the SWIM. * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf * * also, http://developer.apple.com/technotes/hw/hw_09.html claims the * following changes for IIfx: * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP. * Also, "All of the functionality of VIA2 has been moved to other chips". */ #define VIA1A_vSccWrReq 0x80 /* * SCC write. (input) * [CHRP] SCC WREQ: Reflects the state of the * Wait/Request pins from the SCC. * [Macintosh Family Hardware] * as CHRP on SE/30,II,IIx,IIcx,IIci. * on IIfx, "0 means an active request" */ #define VIA1A_vRev8 0x40 /* * Revision 8 board ??? * [CHRP] En WaitReqB: Lets the WaitReq_L * signal from port B of the SCC appear on * the PA7 input pin. Output. * [Macintosh Family] On the SE/30, this * is the bit to flip screen buffers. * 0=alternate, 1=main. * on II,IIx,IIcx,IIci,IIfx this is a bit * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx */ #define VIA1A_vHeadSel 0x20 /* * Head select for IWM. * [CHRP] unused. * [Macintosh Family] "Floppy disk * state-control line SEL" on all but IIfx */ #define VIA1A_vOverlay 0x10 /* * [Macintosh Family] On SE/30,II,IIx,IIcx * this bit enables the "Overlay" address * map in the address decoders as it is on * reset for mapping the ROM over the reset * vector. 1=use overlay map. * On the IIci,IIfx it is another bit of the * CPU ID: 0=normal IIci, 1=IIci with parity * feature or IIfx. * [CHRP] En WaitReqA: Lets the WaitReq_L * signal from port A of the SCC appear * on the PA7 input pin (CHRP). Output. * [MkLinux] "Drive Select" * (with 0x20 being 'disk head select') */ #define VIA1A_vSync 0x08 /* * [CHRP] Sync Modem: modem clock select: * 1: select the external serial clock to * drive the SCC's /RTxCA pin. * 0: Select the 3.6864MHz clock to drive * the SCC cell. * [Macintosh Family] Correct on all but IIfx */ /* * Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control * on Macs which had the PWM sound hardware. Reserved on newer models. * On IIci,IIfx, bits 1-2 are the rest of the CPU ID: * bit 2: 1=IIci, 0=IIfx * bit 1: 1 on both IIci and IIfx. * MkLinux sez bit 0 is 'burnin flag' in this case. * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as * inputs, these bits will read 0. */ #define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */ #define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */ #define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */ #define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */ #define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */ /* * Info on VIA1B is from Macintosh Family Hardware & MkLinux. * CHRP offers no info. */ #define VIA1B_vSound 0x80 /* * Sound enable (for compatibility with * PWM hardware) 0=enabled. * Also, on IIci w/parity, shows parity error * 0=error, 1=OK. */ #define VIA1B_vMystery 0x40 /* * On IIci, parity enable. 0=enabled,1=disabled * On SE/30, vertical sync interrupt enable. * 0=enabled. This vSync interrupt shows up * as a slot $E interrupt. */ #define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */ #define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */ #define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/ #define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */ #define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */ #define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */ /* * VIA2 A register is the interrupt lines raised off the nubus * slots. * The below info is from 'Macintosh Family Hardware.' * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.' * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike. * Perhaps OSS uses vRAM1 and vRAM2 for ADB. */ #define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */ #define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */ #define VIA2A_vIRQE 0x20 /* IRQ from slot $E */ #define VIA2A_vIRQD 0x10 /* IRQ from slot $D */ #define VIA2A_vIRQC 0x08 /* IRQ from slot $C */ #define VIA2A_vIRQB 0x04 /* IRQ from slot $B */ #define VIA2A_vIRQA 0x02 /* IRQ from slot $A */ #define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */ /* * RAM size bits decoded as follows: * bit1 bit0 size of ICs in bank A * 0 0 256 kbit * 0 1 1 Mbit * 1 0 4 Mbit * 1 1 16 Mbit */ /* * Register B has the fun stuff in it */ #define VIA2B_vVBL 0x80 /* * VBL output to VIA1 (60.15Hz) driven by * timer T1. * on IIci, parity test: 0=test mode. * [MkLinux] RBV_PARODD: 1=odd,0=even. */ #define VIA2B_vSndJck 0x40 /* * External sound jack status. * 0=plug is inserted. On SE/30, always 0 */ #define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */ #define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */ #define VIA2B_vMode32 0x08 /* * 24/32bit switch - doubles as cache flush * on II, AMU/PMMU control. * if AMU, 0=24bit to 32bit translation * if PMMU, 1=PMMU is accessing page table. * on SE/30 tied low. * on IIx,IIcx,IIfx, unused. * on IIci/RBV, cache control. 0=flush cache. */ #define VIA2B_vPower 0x04 /* * Power off, 0=shut off power. * on SE/30 this signal sent to PDS card. */ #define VIA2B_vBusLk 0x02 /* * Lock NuBus transactions, 0=locked. * on SE/30 sent to PDS card. */ #define VIA2B_vCDis 0x01 /* * Cache control. On IIci, 1=disable cache card * on others, 0=disable processor's instruction * and data caches. */ /* interrupt flags */ #define IRQ_SET 0x80 /* common */ #define VIA_IRQ_TIMER1 0x40 #define VIA_IRQ_TIMER2 0x20 /* * Apple sez: http://developer.apple.com/technotes/ov/ov_04.html * Another example of a valid function that has no ROM support is the use * of the alternate video page for page-flipping animation. Since there * is no ROM call to flip pages, it is necessary to go play with the * right bit in the VIA chip (6522 Versatile Interface Adapter). * [CSA: don't know which one this is, but it's one of 'em!] */ /* * 6522 registers - see databook. * CSA: Assignments for VIA1 confirmed from CHRP spec. */ /* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */ /* Note: 15 VIA regs, 8 RBV regs */ #define vBufB 0x0000 /* [VIA/RBV] Register B */ #define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */ #define vDirB 0x0400 /* [VIA only] Data Direction Register B. */ #define vDirA 0x0600 /* [VIA only] Data Direction Register A. */ #define vT1CL 0x0800 /* [VIA only] Timer one counter low. */ #define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */ #define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */ #define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */ #define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ #define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ #define vSR 0x1400 /* [VIA only] Shift register. */ #define vACR 0x1600 /* [VIA only] Auxilary control register. */ #define vPCR 0x1800 /* [VIA only] Peripheral control register. */ /* * CHRP sez never ever to *write* this. * Mac family says never to *change* this. * In fact we need to initialize it once at start. */ #define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */ #define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */ #define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */ /* from linux 2.6 drivers/macintosh/via-macii.c */ /* Bits in ACR */ #define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */ #define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */ #define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */ /* * Apple Macintosh Family Hardware Refenece * Table 19-10 ADB transaction states */ #define ADB_STATE_NEW 0 #define ADB_STATE_EVEN 1 #define ADB_STATE_ODD 2 #define ADB_STATE_IDLE 3 #define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2) #define VIA1B_vADB_StateShift 4 #define VIA_TIMER_FREQ (783360) #define VIA_ADB_POLL_FREQ 50 /* XXX: not real */ /* VIA returns time offset from Jan 1, 1904, not 1970 */ #define RTC_OFFSET 2082844800 enum { REG_0, REG_1, REG_2, REG_3, REG_TEST, REG_WPROTECT, REG_PRAM_ADDR, REG_PRAM_ADDR_LAST = REG_PRAM_ADDR + 19, REG_PRAM_SECT, REG_PRAM_SECT_LAST = REG_PRAM_SECT + 7, REG_INVALID, REG_EMPTY = 0xff, }; static void via1_VBL_update(MOS6522Q800VIA1State *v1s) { MOS6522State *s = MOS6522(v1s); /* 60 Hz irq */ v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) / 16630 * 16630; if (s->ier & VIA1_IRQ_VBLANK) { timer_mod(v1s->VBL_timer, v1s->next_VBL); } else { timer_del(v1s->VBL_timer); } } static void via1_one_second_update(MOS6522Q800VIA1State *v1s) { MOS6522State *s = MOS6522(v1s); v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) / 1000 * 1000; if (s->ier & VIA1_IRQ_ONE_SECOND) { timer_mod(v1s->one_second_timer, v1s->next_second); } else { timer_del(v1s->one_second_timer); } } static void via1_VBL(void *opaque) { MOS6522Q800VIA1State *v1s = opaque; MOS6522State *s = MOS6522(v1s); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); s->ifr |= VIA1_IRQ_VBLANK; mdc->update_irq(s); via1_VBL_update(v1s); } static void via1_one_second(void *opaque) { MOS6522Q800VIA1State *v1s = opaque; MOS6522State *s = MOS6522(v1s); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); s->ifr |= VIA1_IRQ_ONE_SECOND; mdc->update_irq(s); via1_one_second_update(v1s); } static void via1_irq_request(void *opaque, int irq, int level) { MOS6522Q800VIA1State *v1s = opaque; MOS6522State *s = MOS6522(v1s); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); if (level) { s->ifr |= 1 << irq; } else { s->ifr &= ~(1 << irq); } mdc->update_irq(s); } static void via2_irq_request(void *opaque, int irq, int level) { MOS6522Q800VIA2State *v2s = opaque; MOS6522State *s = MOS6522(v2s); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); if (level) { s->ifr |= 1 << irq; } else { s->ifr &= ~(1 << irq); } mdc->update_irq(s); } static void pram_update(MacVIAState *m) { if (m->blk) { if (blk_pwrite(m->blk, 0, m->mos6522_via1.PRAM, sizeof(m->mos6522_via1.PRAM), 0) < 0) { qemu_log("pram_update: cannot write to file\n"); } } } /* * RTC Commands * * Command byte Register addressed by the command * * z0000001 Seconds register 0 (lowest-order byte) * z0000101 Seconds register 1 * z0001001 Seconds register 2 * z0001101 Seconds register 3 (highest-order byte) * 00110001 Test register (write-only) * 00110101 Write-Protect Register (write-only) * z010aa01 RAM address 100aa ($10-$13) (first 20 bytes only) * z1aaaa01 RAM address 0aaaa ($00-$0F) (first 20 bytes only) * z0111aaa Extended memory designator and sector number * * For a read request, z=1, for a write z=0 * The letter a indicates bits whose value depend on what parameter * RAM byte you want to address */ static int via1_rtc_compact_cmd(uint8_t value) { uint8_t read = value & 0x80; value &= 0x7f; /* the last 2 bits of a command byte must always be 0b01 ... */ if ((value & 0x78) == 0x38) { /* except for the extended memory designator */ return read | (REG_PRAM_SECT + (value & 0x07)); } if ((value & 0x03) == 0x01) { value >>= 2; if ((value & 0x1c) == 0) { /* seconds registers */ return read | (REG_0 + (value & 0x03)); } else if ((value == 0x0c) && !read) { return REG_TEST; } else if ((value == 0x0d) && !read) { return REG_WPROTECT; } else if ((value & 0x1c) == 0x08) { /* RAM address 0x10 to 0x13 */ return read | (REG_PRAM_ADDR + 0x10 + (value & 0x03)); } else if ((value & 0x43) == 0x41) { /* RAM address 0x00 to 0x0f */ return read | (REG_PRAM_ADDR + (value & 0x0f)); } } return REG_INVALID; } static void via1_rtc_update(MacVIAState *m) { MOS6522Q800VIA1State *v1s = &m->mos6522_via1; MOS6522State *s = MOS6522(v1s); int cmd, sector, addr; uint32_t time; if (s->b & VIA1B_vRTCEnb) { return; } if (s->dirb & VIA1B_vRTCData) { /* send bits to the RTC */ if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) { m->data_out <<= 1; m->data_out |= s->b & VIA1B_vRTCData; m->data_out_cnt++; } trace_via1_rtc_update_data_out(m->data_out_cnt, m->data_out); } else { trace_via1_rtc_update_data_in(m->data_in_cnt, m->data_in); /* receive bits from the RTC */ if ((v1s->last_b & VIA1B_vRTCClk) && !(s->b & VIA1B_vRTCClk) && m->data_in_cnt) { s->b = (s->b & ~VIA1B_vRTCData) | ((m->data_in >> 7) & VIA1B_vRTCData); m->data_in <<= 1; m->data_in_cnt--; } return; } if (m->data_out_cnt != 8) { return; } m->data_out_cnt = 0; trace_via1_rtc_internal_status(m->cmd, m->alt, m->data_out); /* first byte: it's a command */ if (m->cmd == REG_EMPTY) { cmd = via1_rtc_compact_cmd(m->data_out); trace_via1_rtc_internal_cmd(cmd); if (cmd == REG_INVALID) { trace_via1_rtc_cmd_invalid(m->data_out); return; } if (cmd & 0x80) { /* this is a read command */ switch (cmd & 0x7f) { case REG_0...REG_3: /* seconds registers */ /* * register 0 is lowest-order byte * register 3 is highest-order byte */ time = m->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / NANOSECONDS_PER_SECOND); trace_via1_rtc_internal_time(time); m->data_in = (time >> ((cmd & 0x03) << 3)) & 0xff; m->data_in_cnt = 8; trace_via1_rtc_cmd_seconds_read((cmd & 0x7f) - REG_0, m->data_in); break; case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST: /* PRAM address 0x00 -> 0x13 */ m->data_in = v1s->PRAM[(cmd & 0x7f) - REG_PRAM_ADDR]; m->data_in_cnt = 8; trace_via1_rtc_cmd_pram_read((cmd & 0x7f) - REG_PRAM_ADDR, m->data_in); break; case REG_PRAM_SECT...REG_PRAM_SECT_LAST: /* * extended memory designator and sector number * the only two-byte read command */ trace_via1_rtc_internal_set_cmd(cmd); m->cmd = cmd; break; default: g_assert_not_reached(); break; } return; } /* this is a write command, needs a parameter */ if (cmd == REG_WPROTECT || !m->wprotect) { trace_via1_rtc_internal_set_cmd(cmd); m->cmd = cmd; } else { trace_via1_rtc_internal_ignore_cmd(cmd); } return; } /* second byte: it's a parameter */ if (m->alt == REG_EMPTY) { switch (m->cmd & 0x7f) { case REG_0...REG_3: /* seconds register */ /* FIXME */ trace_via1_rtc_cmd_seconds_write(m->cmd - REG_0, m->data_out); m->cmd = REG_EMPTY; break; case REG_TEST: /* device control: nothing to do */ trace_via1_rtc_cmd_test_write(m->data_out); m->cmd = REG_EMPTY; break; case REG_WPROTECT: /* Write Protect register */ trace_via1_rtc_cmd_wprotect_write(m->data_out); m->wprotect = !!(m->data_out & 0x80); m->cmd = REG_EMPTY; break; case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST: /* PRAM address 0x00 -> 0x13 */ trace_via1_rtc_cmd_pram_write(m->cmd - REG_PRAM_ADDR, m->data_out); v1s->PRAM[m->cmd - REG_PRAM_ADDR] = m->data_out; pram_update(m); m->cmd = REG_EMPTY; break; case REG_PRAM_SECT...REG_PRAM_SECT_LAST: addr = (m->data_out >> 2) & 0x1f; sector = (m->cmd & 0x7f) - REG_PRAM_SECT; if (m->cmd & 0x80) { /* it's a read */ m->data_in = v1s->PRAM[sector * 32 + addr]; m->data_in_cnt = 8; trace_via1_rtc_cmd_pram_sect_read(sector, addr, sector * 32 + addr, m->data_in); m->cmd = REG_EMPTY; } else { /* it's a write, we need one more parameter */ trace_via1_rtc_internal_set_alt(addr, sector, addr); m->alt = addr; } break; default: g_assert_not_reached(); break; } return; } /* third byte: it's the data of a REG_PRAM_SECT write */ g_assert(REG_PRAM_SECT <= m->cmd && m->cmd <= REG_PRAM_SECT_LAST); sector = m->cmd - REG_PRAM_SECT; v1s->PRAM[sector * 32 + m->alt] = m->data_out; pram_update(m); trace_via1_rtc_cmd_pram_sect_write(sector, m->alt, sector * 32 + m->alt, m->data_out); m->alt = REG_EMPTY; m->cmd = REG_EMPTY; } static int adb_via_poll(MacVIAState *s, int state, uint8_t *data) { if (state != ADB_STATE_IDLE) { return 0; } if (s->adb_data_in_size < s->adb_data_in_index) { return 0; } if (s->adb_data_out_index != 0) { return 0; } s->adb_data_in_index = 0; s->adb_data_out_index = 0; s->adb_data_in_size = adb_poll(&s->adb_bus, s->adb_data_in, 0xffff); if (s->adb_data_in_size) { *data = s->adb_data_in[s->adb_data_in_index++]; qemu_irq_raise(s->adb_data_ready); } return s->adb_data_in_size; } static int adb_via_send(MacVIAState *s, int state, uint8_t data) { switch (state) { case ADB_STATE_NEW: s->adb_data_out_index = 0; break; case ADB_STATE_EVEN: if ((s->adb_data_out_index & 1) == 0) { return 0; } break; case ADB_STATE_ODD: if (s->adb_data_out_index & 1) { return 0; } break; case ADB_STATE_IDLE: return 0; } assert(s->adb_data_out_index < sizeof(s->adb_data_out) - 1); s->adb_data_out[s->adb_data_out_index++] = data; qemu_irq_raise(s->adb_data_ready); return 1; } static int adb_via_receive(MacVIAState *s, int state, uint8_t *data) { switch (state) { case ADB_STATE_NEW: return 0; case ADB_STATE_EVEN: if (s->adb_data_in_size <= 0) { qemu_irq_raise(s->adb_data_ready); return 0; } if (s->adb_data_in_index >= s->adb_data_in_size) { *data = 0; qemu_irq_raise(s->adb_data_ready); return 1; } if ((s->adb_data_in_index & 1) == 0) { return 0; } break; case ADB_STATE_ODD: if (s->adb_data_in_size <= 0) { qemu_irq_raise(s->adb_data_ready); return 0; } if (s->adb_data_in_index >= s->adb_data_in_size) { *data = 0; qemu_irq_raise(s->adb_data_ready); return 1; } if (s->adb_data_in_index & 1) { return 0; } break; case ADB_STATE_IDLE: if (s->adb_data_out_index == 0) { return 0; } s->adb_data_in_size = adb_request(&s->adb_bus, s->adb_data_in, s->adb_data_out, s->adb_data_out_index); s->adb_data_out_index = 0; s->adb_data_in_index = 0; if (s->adb_data_in_size < 0) { *data = 0xff; qemu_irq_raise(s->adb_data_ready); return -1; } if (s->adb_data_in_size == 0) { return 0; } break; } assert(s->adb_data_in_index < sizeof(s->adb_data_in) - 1); *data = s->adb_data_in[s->adb_data_in_index++]; qemu_irq_raise(s->adb_data_ready); if (*data == 0xff || *data == 0) { return 0; } return 1; } static void via1_adb_update(MacVIAState *m) { MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1); MOS6522State *s = MOS6522(v1s); int state; int ret; state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift; if (s->acr & VIA1ACR_vShiftOut) { /* output mode */ ret = adb_via_send(m, state, s->sr); if (ret > 0) { s->b &= ~VIA1B_vADBInt; } else { s->b |= VIA1B_vADBInt; } } else { /* input mode */ ret = adb_via_receive(m, state, &s->sr); if (ret > 0 && s->sr != 0xff) { s->b &= ~VIA1B_vADBInt; } else { s->b |= VIA1B_vADBInt; } } } static void via_adb_poll(void *opaque) { MacVIAState *m = opaque; MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1); MOS6522State *s = MOS6522(v1s); int state; if (s->b & VIA1B_vADBInt) { state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift; if (adb_via_poll(m, state, &s->sr)) { s->b &= ~VIA1B_vADBInt; } } timer_mod(m->adb_poll_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ)); } static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size) { MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque); MOS6522State *ms = MOS6522(s); int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL); /* * If IRQs are disabled, timers are disabled, but we need to update * VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR */ if (now >= s->next_VBL) { ms->ifr |= VIA1_IRQ_VBLANK; via1_VBL_update(s); } if (now >= s->next_second) { ms->ifr |= VIA1_IRQ_ONE_SECOND; via1_one_second_update(s); } addr = (addr >> 9) & 0xf; return mos6522_read(ms, addr, size); } static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque); MOS6522State *ms = MOS6522(v1s); addr = (addr >> 9) & 0xf; mos6522_write(ms, addr, val, size); via1_one_second_update(v1s); via1_VBL_update(v1s); } static const MemoryRegionOps mos6522_q800_via1_ops = { .read = mos6522_q800_via1_read, .write = mos6522_q800_via1_write, .endianness = DEVICE_BIG_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 1, }, }; static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size) { MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque); MOS6522State *ms = MOS6522(s); addr = (addr >> 9) & 0xf; return mos6522_read(ms, addr, size); } static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque); MOS6522State *ms = MOS6522(s); addr = (addr >> 9) & 0xf; mos6522_write(ms, addr, val, size); } static const MemoryRegionOps mos6522_q800_via2_ops = { .read = mos6522_q800_via2_read, .write = mos6522_q800_via2_write, .endianness = DEVICE_BIG_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 1, }, }; static void mac_via_reset(DeviceState *dev) { MacVIAState *m = MAC_VIA(dev); MOS6522Q800VIA1State *v1s = &m->mos6522_via1; timer_mod(m->adb_poll_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ)); timer_del(v1s->VBL_timer); v1s->next_VBL = 0; timer_del(v1s->one_second_timer); v1s->next_second = 0; m->cmd = REG_EMPTY; m->alt = REG_EMPTY; } static void mac_via_realize(DeviceState *dev, Error **errp) { MacVIAState *m = MAC_VIA(dev); MOS6522State *ms; struct tm tm; int ret; /* Init VIAs 1 and 2 */ sysbus_init_child_obj(OBJECT(dev), "via1", &m->mos6522_via1, sizeof(m->mos6522_via1), TYPE_MOS6522_Q800_VIA1); sysbus_init_child_obj(OBJECT(dev), "via2", &m->mos6522_via2, sizeof(m->mos6522_via2), TYPE_MOS6522_Q800_VIA2); /* Pass through mos6522 output IRQs */ ms = MOS6522(&m->mos6522_via1); object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms), SYSBUS_DEVICE_GPIO_IRQ "[0]"); ms = MOS6522(&m->mos6522_via2); object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms), SYSBUS_DEVICE_GPIO_IRQ "[0]"); object_property_set_bool(OBJECT(&m->mos6522_via1), true, "realized", &error_abort); object_property_set_bool(OBJECT(&m->mos6522_via2), true, "realized", &error_abort); /* Pass through mos6522 input IRQs */ qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq"); qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq"); /* VIA 1 */ m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, via1_one_second, &m->mos6522_via1); m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL, &m->mos6522_via1); qemu_get_timedate(&tm, 0); m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET; m->adb_poll_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via_adb_poll, m); m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq", VIA1_IRQ_ADB_READY_BIT); if (m->blk) { int64_t len = blk_getlength(m->blk); if (len < 0) { error_setg_errno(errp, -len, "could not get length of backing image"); return; } ret = blk_set_perm(m->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE, BLK_PERM_ALL, errp); if (ret < 0) { return; } len = blk_pread(m->blk, 0, m->mos6522_via1.PRAM, sizeof(m->mos6522_via1.PRAM)); if (len != sizeof(m->mos6522_via1.PRAM)) { error_setg(errp, "can't read PRAM contents"); return; } } } static void mac_via_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); MacVIAState *m = MAC_VIA(obj); /* MMIO */ memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE); sysbus_init_mmio(sbd, &m->mmio); memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops, &m->mos6522_via1, "via1", VIA_SIZE); memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem); memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops, &m->mos6522_via2, "via2", VIA_SIZE); memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem); /* ADB */ qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus), TYPE_ADB_BUS, DEVICE(obj), "adb.0"); } static void postload_update_cb(void *opaque, int running, RunState state) { MacVIAState *m = MAC_VIA(opaque); qemu_del_vm_change_state_handler(m->vmstate); m->vmstate = NULL; pram_update(m); } static int mac_via_post_load(void *opaque, int version_id) { MacVIAState *m = MAC_VIA(opaque); if (m->blk) { m->vmstate = qemu_add_vm_change_state_handler(postload_update_cb, m); } return 0; } static const VMStateDescription vmstate_mac_via = { .name = "mac-via", .version_id = 1, .minimum_version_id = 1, .post_load = mac_via_post_load, .fields = (VMStateField[]) { /* VIAs */ VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522, MOS6522State), VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState), VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState), VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState), VMSTATE_INT64(mos6522_via1.next_second, MacVIAState), VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState), VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState), VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522, MOS6522State), /* RTC */ VMSTATE_UINT32(tick_offset, MacVIAState), VMSTATE_UINT8(data_out, MacVIAState), VMSTATE_INT32(data_out_cnt, MacVIAState), VMSTATE_UINT8(data_in, MacVIAState), VMSTATE_UINT8(data_in_cnt, MacVIAState), VMSTATE_UINT8(cmd, MacVIAState), VMSTATE_INT32(wprotect, MacVIAState), VMSTATE_INT32(alt, MacVIAState), /* ADB */ VMSTATE_TIMER_PTR(adb_poll_timer, MacVIAState), VMSTATE_INT32(adb_data_in_size, MacVIAState), VMSTATE_INT32(adb_data_in_index, MacVIAState), VMSTATE_INT32(adb_data_out_index, MacVIAState), VMSTATE_BUFFER(adb_data_in, MacVIAState), VMSTATE_BUFFER(adb_data_out, MacVIAState), VMSTATE_END_OF_LIST() } }; static Property mac_via_properties[] = { DEFINE_PROP_DRIVE("drive", MacVIAState, blk), DEFINE_PROP_END_OF_LIST(), }; static void mac_via_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); dc->realize = mac_via_realize; dc->reset = mac_via_reset; dc->vmsd = &vmstate_mac_via; device_class_set_props(dc, mac_via_properties); } static TypeInfo mac_via_info = { .name = TYPE_MAC_VIA, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MacVIAState), .instance_init = mac_via_init, .class_init = mac_via_class_init, }; /* VIA 1 */ static void mos6522_q800_via1_portB_write(MOS6522State *s) { MOS6522Q800VIA1State *v1s = container_of(s, MOS6522Q800VIA1State, parent_obj); MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1); via1_rtc_update(m); via1_adb_update(m); v1s->last_b = s->b; } static void mos6522_q800_via1_reset(DeviceState *dev) { MOS6522State *ms = MOS6522(dev); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms); mdc->parent_reset(dev); ms->timers[0].frequency = VIA_TIMER_FREQ; ms->timers[1].frequency = VIA_TIMER_FREQ; ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb; } static void mos6522_q800_via1_init(Object *obj) { qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq", VIA1_IRQ_NB); } static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc); dc->reset = mos6522_q800_via1_reset; mdc->portB_write = mos6522_q800_via1_portB_write; } static const TypeInfo mos6522_q800_via1_type_info = { .name = TYPE_MOS6522_Q800_VIA1, .parent = TYPE_MOS6522, .instance_size = sizeof(MOS6522Q800VIA1State), .instance_init = mos6522_q800_via1_init, .class_init = mos6522_q800_via1_class_init, }; /* VIA 2 */ static void mos6522_q800_via2_portB_write(MOS6522State *s) { if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) { /* shutdown */ qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); } } static void mos6522_q800_via2_reset(DeviceState *dev) { MOS6522State *ms = MOS6522(dev); MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms); mdc->parent_reset(dev); ms->timers[0].frequency = VIA_TIMER_FREQ; ms->timers[1].frequency = VIA_TIMER_FREQ; ms->dirb = 0; ms->b = 0; } static void mos6522_q800_via2_init(Object *obj) { qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq", VIA2_IRQ_NB); } static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc); dc->reset = mos6522_q800_via2_reset; mdc->portB_write = mos6522_q800_via2_portB_write; } static const TypeInfo mos6522_q800_via2_type_info = { .name = TYPE_MOS6522_Q800_VIA2, .parent = TYPE_MOS6522, .instance_size = sizeof(MOS6522Q800VIA2State), .instance_init = mos6522_q800_via2_init, .class_init = mos6522_q800_via2_class_init, }; static void mac_via_register_types(void) { type_register_static(&mos6522_q800_via1_type_info); type_register_static(&mos6522_q800_via2_type_info); type_register_static(&mac_via_info); } type_init(mac_via_register_types);