/* * ARM mach-virt emulation * * Copyright (c) 2013 Linaro Limited * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2 or later, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see . * * Emulate a virtual board which works by passing Linux all the information * it needs about what devices are present via the device tree. * There are some restrictions about what we can do here: * + we can only present devices whose Linux drivers will work based * purely on the device tree with no platform data at all * + we want to present a very stripped-down minimalist platform, * both because this reduces the security attack surface from the guest * and also because it reduces our exposure to being broken when * the kernel updates its device tree bindings and requires further * information in a device binding that we aren't providing. * This is essentially the same approach kvmtool uses. */ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/devices.h" #include "net/net.h" #include "sysemu/block-backend.h" #include "sysemu/device_tree.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "hw/boards.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "qemu/bitops.h" #include "qemu/error-report.h" #include "hw/pci-host/gpex.h" #include "hw/arm/virt-acpi-build.h" #include "hw/arm/sysbus-fdt.h" #include "hw/platform-bus.h" /* Number of external interrupt lines to configure the GIC with */ #define NUM_IRQS 256 #define GIC_FDT_IRQ_TYPE_SPI 0 #define GIC_FDT_IRQ_TYPE_PPI 1 #define GIC_FDT_IRQ_FLAGS_EDGE_LO_HI 1 #define GIC_FDT_IRQ_FLAGS_EDGE_HI_LO 2 #define GIC_FDT_IRQ_FLAGS_LEVEL_HI 4 #define GIC_FDT_IRQ_FLAGS_LEVEL_LO 8 #define GIC_FDT_IRQ_PPI_CPU_START 8 #define GIC_FDT_IRQ_PPI_CPU_WIDTH 8 #define PLATFORM_BUS_NUM_IRQS 64 static ARMPlatformBusSystemParams platform_bus_params; typedef struct VirtBoardInfo { struct arm_boot_info bootinfo; const char *cpu_model; const MemMapEntry *memmap; const int *irqmap; int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; uint32_t gic_phandle; uint32_t v2m_phandle; } VirtBoardInfo; typedef struct { MachineClass parent; VirtBoardInfo *daughterboard; } VirtMachineClass; typedef struct { MachineState parent; bool secure; } VirtMachineState; #define TYPE_VIRT_MACHINE "virt" #define VIRT_MACHINE(obj) \ OBJECT_CHECK(VirtMachineState, (obj), TYPE_VIRT_MACHINE) #define VIRT_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(VirtMachineClass, obj, TYPE_VIRT_MACHINE) #define VIRT_MACHINE_CLASS(klass) \ OBJECT_CLASS_CHECK(VirtMachineClass, klass, TYPE_VIRT_MACHINE) /* Addresses and sizes of our components. * 0..128MB is space for a flash device so we can run bootrom code such as UEFI. * 128MB..256MB is used for miscellaneous device I/O. * 256MB..1GB is reserved for possible future PCI support (ie where the * PCI memory window will go if we add a PCI host controller). * 1GB and up is RAM (which may happily spill over into the * high memory region beyond 4GB). * This represents a compromise between how much RAM can be given to * a 32 bit VM and leaving space for expansion and in particular for PCI. * Note that devices should generally be placed at multiples of 0x10000, * to accommodate guests using 64K pages. */ static const MemMapEntry a15memmap[] = { /* Space up to 0x8000000 is reserved for a boot ROM */ [VIRT_FLASH] = { 0, 0x08000000 }, [VIRT_CPUPERIPHS] = { 0x08000000, 0x00020000 }, /* GIC distributor and CPU interfaces sit inside the CPU peripheral space */ [VIRT_GIC_DIST] = { 0x08000000, 0x00010000 }, [VIRT_GIC_CPU] = { 0x08010000, 0x00010000 }, [VIRT_GIC_V2M] = { 0x08020000, 0x00001000 }, [VIRT_UART] = { 0x09000000, 0x00001000 }, [VIRT_RTC] = { 0x09010000, 0x00001000 }, [VIRT_FW_CFG] = { 0x09020000, 0x0000000a }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, [VIRT_PCIE_MMIO] = { 0x10000000, 0x2eff0000 }, [VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 }, [VIRT_PCIE_ECAM] = { 0x3f000000, 0x01000000 }, [VIRT_MEM] = { 0x40000000, 30ULL * 1024 * 1024 * 1024 }, }; static const int a15irqmap[] = { [VIRT_UART] = 1, [VIRT_RTC] = 2, [VIRT_PCIE] = 3, /* ... to 6 */ [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */ }; static VirtBoardInfo machines[] = { { .cpu_model = "cortex-a15", .memmap = a15memmap, .irqmap = a15irqmap, }, { .cpu_model = "cortex-a57", .memmap = a15memmap, .irqmap = a15irqmap, }, { .cpu_model = "host", .memmap = a15memmap, .irqmap = a15irqmap, }, }; static VirtBoardInfo *find_machine_info(const char *cpu) { int i; for (i = 0; i < ARRAY_SIZE(machines); i++) { if (strcmp(cpu, machines[i].cpu_model) == 0) { return &machines[i]; } } return NULL; } static void create_fdt(VirtBoardInfo *vbi) { void *fdt = create_device_tree(&vbi->fdt_size); if (!fdt) { error_report("create_device_tree() failed"); exit(1); } vbi->fdt = fdt; /* Header */ qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,dummy-virt"); qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); /* * /chosen and /memory nodes must exist for load_dtb * to fill in necessary properties later */ qemu_fdt_add_subnode(fdt, "/chosen"); qemu_fdt_add_subnode(fdt, "/memory"); qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); /* Clock node, for the benefit of the UART. The kernel device tree * binding documentation claims the PL011 node clock properties are * optional but in practice if you omit them the kernel refuses to * probe for the device. */ vbi->clock_phandle = qemu_fdt_alloc_phandle(fdt); qemu_fdt_add_subnode(fdt, "/apb-pclk"); qemu_fdt_setprop_string(fdt, "/apb-pclk", "compatible", "fixed-clock"); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "#clock-cells", 0x0); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "clock-frequency", 24000000); qemu_fdt_setprop_string(fdt, "/apb-pclk", "clock-output-names", "clk24mhz"); qemu_fdt_setprop_cell(fdt, "/apb-pclk", "phandle", vbi->clock_phandle); } static void fdt_add_psci_node(const VirtBoardInfo *vbi) { uint32_t cpu_suspend_fn; uint32_t cpu_off_fn; uint32_t cpu_on_fn; uint32_t migrate_fn; void *fdt = vbi->fdt; ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); qemu_fdt_add_subnode(fdt, "/psci"); if (armcpu->psci_version == 2) { const char comp[] = "arm,psci-0.2\0arm,psci"; qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; } else { cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; } } else { qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; } /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer * to the instruction that should be used to invoke PSCI functions. * However, the device tree binding uses 'method' instead, so that is * what we should use here. */ qemu_fdt_setprop_string(fdt, "/psci", "method", "hvc"); qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); } static void fdt_add_timer_nodes(const VirtBoardInfo *vbi) { /* Note that on A15 h/w these interrupts are level-triggered, * but for the GIC implementation provided by both QEMU and KVM * they are edge-triggered. */ ARMCPU *armcpu; uint32_t irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI; irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vbi->smp_cpus) - 1); qemu_fdt_add_subnode(vbi->fdt, "/timer"); armcpu = ARM_CPU(qemu_get_cpu(0)); if (arm_feature(&armcpu->env, ARM_FEATURE_V8)) { const char compat[] = "arm,armv8-timer\0arm,armv7-timer"; qemu_fdt_setprop(vbi->fdt, "/timer", "compatible", compat, sizeof(compat)); } else { qemu_fdt_setprop_string(vbi->fdt, "/timer", "compatible", "arm,armv7-timer"); } qemu_fdt_setprop_cells(vbi->fdt, "/timer", "interrupts", GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags, GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags, GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags, GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags); } static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi) { int cpu; qemu_fdt_add_subnode(vbi->fdt, "/cpus"); qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#address-cells", 0x1); qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#size-cells", 0x0); for (cpu = vbi->smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop_string(vbi->fdt, nodename, "device_type", "cpu"); qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", armcpu->dtb_compatible); if (vbi->smp_cpus > 1) { qemu_fdt_setprop_string(vbi->fdt, nodename, "enable-method", "psci"); } qemu_fdt_setprop_cell(vbi->fdt, nodename, "reg", cpu); g_free(nodename); } } static void fdt_add_v2m_gic_node(VirtBoardInfo *vbi) { vbi->v2m_phandle = qemu_fdt_alloc_phandle(vbi->fdt); qemu_fdt_add_subnode(vbi->fdt, "/intc/v2m"); qemu_fdt_setprop_string(vbi->fdt, "/intc/v2m", "compatible", "arm,gic-v2m-frame"); qemu_fdt_setprop(vbi->fdt, "/intc/v2m", "msi-controller", NULL, 0); qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc/v2m", "reg", 2, vbi->memmap[VIRT_GIC_V2M].base, 2, vbi->memmap[VIRT_GIC_V2M].size); qemu_fdt_setprop_cell(vbi->fdt, "/intc/v2m", "phandle", vbi->v2m_phandle); } static void fdt_add_gic_node(VirtBoardInfo *vbi) { vbi->gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt); qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", vbi->gic_phandle); qemu_fdt_add_subnode(vbi->fdt, "/intc"); /* 'cortex-a15-gic' means 'GIC v2' */ qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible", "arm,cortex-a15-gic"); qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#interrupt-cells", 3); qemu_fdt_setprop(vbi->fdt, "/intc", "interrupt-controller", NULL, 0); qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg", 2, vbi->memmap[VIRT_GIC_DIST].base, 2, vbi->memmap[VIRT_GIC_DIST].size, 2, vbi->memmap[VIRT_GIC_CPU].base, 2, vbi->memmap[VIRT_GIC_CPU].size); qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#address-cells", 0x2); qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#size-cells", 0x2); qemu_fdt_setprop(vbi->fdt, "/intc", "ranges", NULL, 0); qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle); } static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic) { int i; int irq = vbi->irqmap[VIRT_GIC_V2M]; DeviceState *dev; dev = qdev_create(NULL, "arm-gicv2m"); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vbi->memmap[VIRT_GIC_V2M].base); qdev_prop_set_uint32(dev, "base-spi", irq); qdev_prop_set_uint32(dev, "num-spi", NUM_GICV2M_SPIS); qdev_init_nofail(dev); for (i = 0; i < NUM_GICV2M_SPIS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); } fdt_add_v2m_gic_node(vbi); } static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic) { /* We create a standalone GIC v2 */ DeviceState *gicdev; SysBusDevice *gicbusdev; const char *gictype = "arm_gic"; int i; if (kvm_irqchip_in_kernel()) { gictype = "kvm-arm-gic"; } gicdev = qdev_create(NULL, gictype); qdev_prop_set_uint32(gicdev, "revision", 2); qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus); /* Note that the num-irq property counts both internal and external * interrupts; there are always 32 of the former (mandated by GIC spec). */ qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32); qdev_init_nofail(gicdev); gicbusdev = SYS_BUS_DEVICE(gicdev); sysbus_mmio_map(gicbusdev, 0, vbi->memmap[VIRT_GIC_DIST].base); sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base); /* Wire the outputs from each CPU's generic timer to the * appropriate GIC PPI inputs, and the GIC's IRQ output to * the CPU's IRQ input. */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); int ppibase = NUM_IRQS + i * 32; /* physical timer; we wire it up to the non-secure timer's ID, * since a real A15 always has TrustZone but QEMU doesn't. */ qdev_connect_gpio_out(cpudev, 0, qdev_get_gpio_in(gicdev, ppibase + 30)); /* virtual timer */ qdev_connect_gpio_out(cpudev, 1, qdev_get_gpio_in(gicdev, ppibase + 27)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); sysbus_connect_irq(gicbusdev, i + smp_cpus, qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); } for (i = 0; i < NUM_IRQS; i++) { pic[i] = qdev_get_gpio_in(gicdev, i); } fdt_add_gic_node(vbi); create_v2m(vbi, pic); } static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic) { char *nodename; hwaddr base = vbi->memmap[VIRT_UART].base; hwaddr size = vbi->memmap[VIRT_UART].size; int irq = vbi->irqmap[VIRT_UART]; const char compat[] = "arm,pl011\0arm,primecell"; const char clocknames[] = "uartclk\0apb_pclk"; sysbus_create_simple("pl011", base, pic[irq]); nodename = g_strdup_printf("/pl011@%" PRIx64, base); qemu_fdt_add_subnode(vbi->fdt, nodename); /* Note that we can't use setprop_string because of the embedded NUL */ qemu_fdt_setprop(vbi->fdt, nodename, "compatible", compat, sizeof(compat)); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base, 2, size); qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupts", GIC_FDT_IRQ_TYPE_SPI, irq, GIC_FDT_IRQ_FLAGS_LEVEL_HI); qemu_fdt_setprop_cells(vbi->fdt, nodename, "clocks", vbi->clock_phandle, vbi->clock_phandle); qemu_fdt_setprop(vbi->fdt, nodename, "clock-names", clocknames, sizeof(clocknames)); qemu_fdt_setprop_string(vbi->fdt, "/chosen", "stdout-path", nodename); g_free(nodename); } static void create_rtc(const VirtBoardInfo *vbi, qemu_irq *pic) { char *nodename; hwaddr base = vbi->memmap[VIRT_RTC].base; hwaddr size = vbi->memmap[VIRT_RTC].size; int irq = vbi->irqmap[VIRT_RTC]; const char compat[] = "arm,pl031\0arm,primecell"; sysbus_create_simple("pl031", base, pic[irq]); nodename = g_strdup_printf("/pl031@%" PRIx64, base); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop(vbi->fdt, nodename, "compatible", compat, sizeof(compat)); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base, 2, size); qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupts", GIC_FDT_IRQ_TYPE_SPI, irq, GIC_FDT_IRQ_FLAGS_LEVEL_HI); qemu_fdt_setprop_cell(vbi->fdt, nodename, "clocks", vbi->clock_phandle); qemu_fdt_setprop_string(vbi->fdt, nodename, "clock-names", "apb_pclk"); g_free(nodename); } static void create_virtio_devices(const VirtBoardInfo *vbi, qemu_irq *pic) { int i; hwaddr size = vbi->memmap[VIRT_MMIO].size; /* We create the transports in forwards order. Since qbus_realize() * prepends (not appends) new child buses, the incrementing loop below will * create a list of virtio-mmio buses with decreasing base addresses. * * When a -device option is processed from the command line, * qbus_find_recursive() picks the next free virtio-mmio bus in forwards * order. The upshot is that -device options in increasing command line * order are mapped to virtio-mmio buses with decreasing base addresses. * * When this code was originally written, that arrangement ensured that the * guest Linux kernel would give the lowest "name" (/dev/vda, eth0, etc) to * the first -device on the command line. (The end-to-end order is a * function of this loop, qbus_realize(), qbus_find_recursive(), and the * guest kernel's name-to-address assignment strategy.) * * Meanwhile, the kernel's traversal seems to have been reversed; see eg. * the message, if not necessarily the code, of commit 70161ff336. * Therefore the loop now establishes the inverse of the original intent. * * Unfortunately, we can't counteract the kernel change by reversing the * loop; it would break existing command lines. * * In any case, the kernel makes no guarantee about the stability of * enumeration order of virtio devices (as demonstrated by it changing * between kernel versions). For reliable and stable identification * of disks users must use UUIDs or similar mechanisms. */ for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) { int irq = vbi->irqmap[VIRT_MMIO] + i; hwaddr base = vbi->memmap[VIRT_MMIO].base + i * size; sysbus_create_simple("virtio-mmio", base, pic[irq]); } /* We add dtb nodes in reverse order so that they appear in the finished * device tree lowest address first. * * Note that this mapping is independent of the loop above. The previous * loop influences virtio device to virtio transport assignment, whereas * this loop controls how virtio transports are laid out in the dtb. */ for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) { char *nodename; int irq = vbi->irqmap[VIRT_MMIO] + i; hwaddr base = vbi->memmap[VIRT_MMIO].base + i * size; nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, base); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", "virtio,mmio"); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base, 2, size); qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupts", GIC_FDT_IRQ_TYPE_SPI, irq, GIC_FDT_IRQ_FLAGS_EDGE_LO_HI); g_free(nodename); } } static void create_one_flash(const char *name, hwaddr flashbase, hwaddr flashsize) { /* Create and map a single flash device. We use the same * parameters as the flash devices on the Versatile Express board. */ DriveInfo *dinfo = drive_get_next(IF_PFLASH); DeviceState *dev = qdev_create(NULL, "cfi.pflash01"); const uint64_t sectorlength = 256 * 1024; if (dinfo) { qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo), &error_abort); } qdev_prop_set_uint32(dev, "num-blocks", flashsize / sectorlength); qdev_prop_set_uint64(dev, "sector-length", sectorlength); qdev_prop_set_uint8(dev, "width", 4); qdev_prop_set_uint8(dev, "device-width", 2); qdev_prop_set_bit(dev, "big-endian", false); qdev_prop_set_uint16(dev, "id0", 0x89); qdev_prop_set_uint16(dev, "id1", 0x18); qdev_prop_set_uint16(dev, "id2", 0x00); qdev_prop_set_uint16(dev, "id3", 0x00); qdev_prop_set_string(dev, "name", name); qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, flashbase); } static void create_flash(const VirtBoardInfo *vbi) { /* Create two flash devices to fill the VIRT_FLASH space in the memmap. * Any file passed via -bios goes in the first of these. */ hwaddr flashsize = vbi->memmap[VIRT_FLASH].size / 2; hwaddr flashbase = vbi->memmap[VIRT_FLASH].base; char *nodename; if (bios_name) { char *fn; int image_size; if (drive_get(IF_PFLASH, 0, 0)) { error_report("The contents of the first flash device may be " "specified with -bios or with -drive if=pflash... " "but you cannot use both options at once"); exit(1); } fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); if (!fn) { error_report("Could not find ROM image '%s'", bios_name); exit(1); } image_size = load_image_targphys(fn, flashbase, flashsize); g_free(fn); if (image_size < 0) { error_report("Could not load ROM image '%s'", bios_name); exit(1); } } create_one_flash("virt.flash0", flashbase, flashsize); create_one_flash("virt.flash1", flashbase + flashsize, flashsize); nodename = g_strdup_printf("/flash@%" PRIx64, flashbase); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", "cfi-flash"); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, flashbase, 2, flashsize, 2, flashbase + flashsize, 2, flashsize); qemu_fdt_setprop_cell(vbi->fdt, nodename, "bank-width", 4); g_free(nodename); } static void create_fw_cfg(const VirtBoardInfo *vbi) { hwaddr base = vbi->memmap[VIRT_FW_CFG].base; hwaddr size = vbi->memmap[VIRT_FW_CFG].size; char *nodename; fw_cfg_init_mem_wide(base + 8, base, 8); nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", "qemu,fw-cfg-mmio"); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base, 2, size); g_free(nodename); } static void create_pcie_irq_map(const VirtBoardInfo *vbi, uint32_t gic_phandle, int first_irq, const char *nodename) { int devfn, pin; uint32_t full_irq_map[4 * 4 * 10] = { 0 }; uint32_t *irq_map = full_irq_map; for (devfn = 0; devfn <= 0x18; devfn += 0x8) { for (pin = 0; pin < 4; pin++) { int irq_type = GIC_FDT_IRQ_TYPE_SPI; int irq_nr = first_irq + ((pin + PCI_SLOT(devfn)) % PCI_NUM_PINS); int irq_level = GIC_FDT_IRQ_FLAGS_LEVEL_HI; int i; uint32_t map[] = { devfn << 8, 0, 0, /* devfn */ pin + 1, /* PCI pin */ gic_phandle, 0, 0, irq_type, irq_nr, irq_level }; /* GIC irq */ /* Convert map to big endian */ for (i = 0; i < 10; i++) { irq_map[i] = cpu_to_be32(map[i]); } irq_map += 10; } } qemu_fdt_setprop(vbi->fdt, nodename, "interrupt-map", full_irq_map, sizeof(full_irq_map)); qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupt-map-mask", 0x1800, 0, 0, /* devfn (PCI_SLOT(3)) */ 0x7 /* PCI irq */); } static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic) { hwaddr base_mmio = vbi->memmap[VIRT_PCIE_MMIO].base; hwaddr size_mmio = vbi->memmap[VIRT_PCIE_MMIO].size; hwaddr base_pio = vbi->memmap[VIRT_PCIE_PIO].base; hwaddr size_pio = vbi->memmap[VIRT_PCIE_PIO].size; hwaddr base_ecam = vbi->memmap[VIRT_PCIE_ECAM].base; hwaddr size_ecam = vbi->memmap[VIRT_PCIE_ECAM].size; hwaddr base = base_mmio; int nr_pcie_buses = size_ecam / PCIE_MMCFG_SIZE_MIN; int irq = vbi->irqmap[VIRT_PCIE]; MemoryRegion *mmio_alias; MemoryRegion *mmio_reg; MemoryRegion *ecam_alias; MemoryRegion *ecam_reg; DeviceState *dev; char *nodename; int i; dev = qdev_create(NULL, TYPE_GPEX_HOST); qdev_init_nofail(dev); /* Map only the first size_ecam bytes of ECAM space */ ecam_alias = g_new0(MemoryRegion, 1); ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", ecam_reg, 0, size_ecam); memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias); /* Map the MMIO window into system address space so as to expose * the section of PCI MMIO space which starts at the same base address * (ie 1:1 mapping for that part of PCI MMIO space visible through * the window). */ mmio_alias = g_new0(MemoryRegion, 1); mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", mmio_reg, base_mmio, size_mmio); memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias); /* Map IO port space */ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio); for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); } nodename = g_strdup_printf("/pcie@%" PRIx64, base); qemu_fdt_add_subnode(vbi->fdt, nodename); qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", "pci-host-ecam-generic"); qemu_fdt_setprop_string(vbi->fdt, nodename, "device_type", "pci"); qemu_fdt_setprop_cell(vbi->fdt, nodename, "#address-cells", 3); qemu_fdt_setprop_cell(vbi->fdt, nodename, "#size-cells", 2); qemu_fdt_setprop_cells(vbi->fdt, nodename, "bus-range", 0, nr_pcie_buses - 1); qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent", vbi->v2m_phandle); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg", 2, base_ecam, 2, size_ecam); qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "ranges", 1, FDT_PCI_RANGE_IOPORT, 2, 0, 2, base_pio, 2, size_pio, 1, FDT_PCI_RANGE_MMIO, 2, base_mmio, 2, base_mmio, 2, size_mmio); qemu_fdt_setprop_cell(vbi->fdt, nodename, "#interrupt-cells", 1); create_pcie_irq_map(vbi, vbi->gic_phandle, irq, nodename); g_free(nodename); } static void create_platform_bus(VirtBoardInfo *vbi, qemu_irq *pic) { DeviceState *dev; SysBusDevice *s; int i; ARMPlatformBusFDTParams *fdt_params = g_new(ARMPlatformBusFDTParams, 1); MemoryRegion *sysmem = get_system_memory(); platform_bus_params.platform_bus_base = vbi->memmap[VIRT_PLATFORM_BUS].base; platform_bus_params.platform_bus_size = vbi->memmap[VIRT_PLATFORM_BUS].size; platform_bus_params.platform_bus_first_irq = vbi->irqmap[VIRT_PLATFORM_BUS]; platform_bus_params.platform_bus_num_irqs = PLATFORM_BUS_NUM_IRQS; fdt_params->system_params = &platform_bus_params; fdt_params->binfo = &vbi->bootinfo; fdt_params->intc = "/intc"; /* * register a machine init done notifier that creates the device tree * nodes of the platform bus and its children dynamic sysbus devices */ arm_register_platform_bus_fdt_creator(fdt_params); dev = qdev_create(NULL, TYPE_PLATFORM_BUS_DEVICE); dev->id = TYPE_PLATFORM_BUS_DEVICE; qdev_prop_set_uint32(dev, "num_irqs", platform_bus_params.platform_bus_num_irqs); qdev_prop_set_uint32(dev, "mmio_size", platform_bus_params.platform_bus_size); qdev_init_nofail(dev); s = SYS_BUS_DEVICE(dev); for (i = 0; i < platform_bus_params.platform_bus_num_irqs; i++) { int irqn = platform_bus_params.platform_bus_first_irq + i; sysbus_connect_irq(s, i, pic[irqn]); } memory_region_add_subregion(sysmem, platform_bus_params.platform_bus_base, sysbus_mmio_get_region(s, 0)); } static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size) { const VirtBoardInfo *board = (const VirtBoardInfo *)binfo; *fdt_size = board->fdt_size; return board->fdt; } static void virt_guest_info_machine_done(Notifier *notifier, void *data) { VirtGuestInfoState *guest_info_state = container_of(notifier, VirtGuestInfoState, machine_done); virt_acpi_setup(&guest_info_state->info); } static void machvirt_init(MachineState *machine) { VirtMachineState *vms = VIRT_MACHINE(machine); qemu_irq pic[NUM_IRQS]; MemoryRegion *sysmem = get_system_memory(); int n; MemoryRegion *ram = g_new(MemoryRegion, 1); const char *cpu_model = machine->cpu_model; VirtBoardInfo *vbi; VirtGuestInfoState *guest_info_state = g_malloc0(sizeof *guest_info_state); VirtGuestInfo *guest_info = &guest_info_state->info; char **cpustr; if (!cpu_model) { cpu_model = "cortex-a15"; } /* Separate the actual CPU model name from any appended features */ cpustr = g_strsplit(cpu_model, ",", 2); vbi = find_machine_info(cpustr[0]); if (!vbi) { error_report("mach-virt: CPU %s not supported", cpustr[0]); exit(1); } vbi->smp_cpus = smp_cpus; if (machine->ram_size > vbi->memmap[VIRT_MEM].size) { error_report("mach-virt: cannot model more than 30GB RAM"); exit(1); } create_fdt(vbi); for (n = 0; n < smp_cpus; n++) { ObjectClass *oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]); CPUClass *cc = CPU_CLASS(oc); Object *cpuobj; Error *err = NULL; char *cpuopts = g_strdup(cpustr[1]); if (!oc) { fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } cpuobj = object_new(object_class_get_name(oc)); /* Handle any CPU options specified by the user */ cc->parse_features(CPU(cpuobj), cpuopts, &err); g_free(cpuopts); if (err) { error_report_err(err); exit(1); } if (!vms->secure) { object_property_set_bool(cpuobj, false, "has_el3", NULL); } object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_HVC, "psci-conduit", NULL); /* Secondary CPUs start in PSCI powered-down state */ if (n > 0) { object_property_set_bool(cpuobj, true, "start-powered-off", NULL); } if (object_property_find(cpuobj, "reset-cbar", NULL)) { object_property_set_int(cpuobj, vbi->memmap[VIRT_CPUPERIPHS].base, "reset-cbar", &error_abort); } object_property_set_bool(cpuobj, true, "realized", NULL); } g_strfreev(cpustr); fdt_add_timer_nodes(vbi); fdt_add_cpu_nodes(vbi); fdt_add_psci_node(vbi); memory_region_allocate_system_memory(ram, NULL, "mach-virt.ram", machine->ram_size); memory_region_add_subregion(sysmem, vbi->memmap[VIRT_MEM].base, ram); create_flash(vbi); create_gic(vbi, pic); create_uart(vbi, pic); create_rtc(vbi, pic); create_pcie(vbi, pic); /* Create mmio transports, so the user can create virtio backends * (which will be automatically plugged in to the transports). If * no backend is created the transport will just sit harmlessly idle. */ create_virtio_devices(vbi, pic); create_fw_cfg(vbi); rom_set_fw(fw_cfg_find()); guest_info->smp_cpus = smp_cpus; guest_info->fw_cfg = fw_cfg_find(); guest_info->memmap = vbi->memmap; guest_info->irqmap = vbi->irqmap; guest_info_state->machine_done.notify = virt_guest_info_machine_done; qemu_add_machine_init_done_notifier(&guest_info_state->machine_done); vbi->bootinfo.ram_size = machine->ram_size; vbi->bootinfo.kernel_filename = machine->kernel_filename; vbi->bootinfo.kernel_cmdline = machine->kernel_cmdline; vbi->bootinfo.initrd_filename = machine->initrd_filename; vbi->bootinfo.nb_cpus = smp_cpus; vbi->bootinfo.board_id = -1; vbi->bootinfo.loader_start = vbi->memmap[VIRT_MEM].base; vbi->bootinfo.get_dtb = machvirt_dtb; vbi->bootinfo.firmware_loaded = bios_name || drive_get(IF_PFLASH, 0, 0); arm_load_kernel(ARM_CPU(first_cpu), &vbi->bootinfo); /* * arm_load_kernel machine init done notifier registration must * happen before the platform_bus_create call. In this latter, * another notifier is registered which adds platform bus nodes. * Notifiers are executed in registration reverse order. */ create_platform_bus(vbi, pic); } static bool virt_get_secure(Object *obj, Error **errp) { VirtMachineState *vms = VIRT_MACHINE(obj); return vms->secure; } static void virt_set_secure(Object *obj, bool value, Error **errp) { VirtMachineState *vms = VIRT_MACHINE(obj); vms->secure = value; } static void virt_instance_init(Object *obj) { VirtMachineState *vms = VIRT_MACHINE(obj); /* EL3 is enabled by default on virt */ vms->secure = true; object_property_add_bool(obj, "secure", virt_get_secure, virt_set_secure, NULL); object_property_set_description(obj, "secure", "Set on/off to enable/disable the ARM " "Security Extensions (TrustZone)", NULL); } static void virt_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->name = TYPE_VIRT_MACHINE; mc->desc = "ARM Virtual Machine", mc->init = machvirt_init; mc->max_cpus = 8; mc->has_dynamic_sysbus = true; } static const TypeInfo machvirt_info = { .name = TYPE_VIRT_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(VirtMachineState), .instance_init = virt_instance_init, .class_size = sizeof(VirtMachineClass), .class_init = virt_class_init, }; static void machvirt_machine_init(void) { type_register_static(&machvirt_info); } machine_init(machvirt_machine_init);