From 397424f87f6b80b351d38438110cf5caf86cc05b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?In=C3=A8s=20Varhol?= Date: Mon, 26 Feb 2024 14:07:23 +0000 Subject: tests/qtest: Check that EXTI fan-in irqs are correctly connected MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit adds a QTest that verifies each input line of a specific EXTI OR gate can influence the output line. Signed-off-by: Inès Varhol Reviewed-by: Peter Maydell Message-id: 20240220184145.106107-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell --- tests/qtest/stm32l4x5_exti-test.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'tests') diff --git a/tests/qtest/stm32l4x5_exti-test.c b/tests/qtest/stm32l4x5_exti-test.c index c390077..81830be 100644 --- a/tests/qtest/stm32l4x5_exti-test.c +++ b/tests/qtest/stm32l4x5_exti-test.c @@ -31,6 +31,7 @@ #define EXTI0_IRQ 6 #define EXTI1_IRQ 7 +#define EXTI5_9_IRQ 23 #define EXTI35_IRQ 1 static void enable_nvic_irq(unsigned int n) @@ -499,6 +500,40 @@ static void test_interrupt(void) g_assert_false(check_nvic_pending(EXTI1_IRQ)); } +static void test_orred_interrupts(void) +{ + /* + * For lines EXTI5..9 (fanned-in to NVIC irq 23), + * test that raising the line pends interrupt + * 23 in NVIC. + */ + enable_nvic_irq(EXTI5_9_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI5_9_IRQ)); + + /* Enable interrupt lines EXTI[5..9] */ + exti_writel(EXTI_IMR1, (0x1F << 5)); + + /* Configure interrupt on rising edge */ + exti_writel(EXTI_RTSR1, (0x1F << 5)); + + /* Raise GPIO line i, check that the interrupt is pending */ + for (unsigned i = 5; i < 10; i++) { + exti_set_irq(i, 1); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << i); + g_assert_true(check_nvic_pending(EXTI5_9_IRQ)); + + exti_writel(EXTI_PR1, 1 << i); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + g_assert_true(check_nvic_pending(EXTI5_9_IRQ)); + + unpend_nvic_irq(EXTI5_9_IRQ); + g_assert_false(check_nvic_pending(EXTI5_9_IRQ)); + } +} + int main(int argc, char **argv) { int ret; @@ -515,6 +550,8 @@ int main(int argc, char **argv) qtest_add_func("stm32l4x5/exti/masked_interrupt", test_masked_interrupt); qtest_add_func("stm32l4x5/exti/interrupt", test_interrupt); qtest_add_func("stm32l4x5/exti/test_edge_selector", test_edge_selector); + qtest_add_func("stm32l4x5/exti/test_orred_interrupts", + test_orred_interrupts); qtest_start("-machine b-l475e-iot01a"); ret = g_test_run(); -- cgit v1.1 From 2f79d2ed648124f193f813fb26a264997bcb1c38 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Mon, 26 Feb 2024 16:48:39 +0000 Subject: tests/avocado/boot_linux_console.py: Add Rpi4b boot tests Signed-off-by: Sergey Kambalin Message-id: 20240226000259.2752893-31-sergey.kambalin@auriga.com Reviewed-by: Peter Maydell [PMM: Comment out use of USB, which depends on PCI] Signed-off-by: Peter Maydell --- tests/avocado/boot_linux_console.py | 97 +++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) (limited to 'tests') diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index a00202d..989b651 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -501,6 +501,103 @@ class BootLinuxConsole(LinuxKernelTest): # Wait for VM to shut down gracefully self.vm.wait() + def test_arm_raspi4(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:raspi4b + :avocado: tags=device:pl011 + :avocado: tags=accel:tcg + :avocado: tags=rpi4b + + The kernel can be rebuilt using the kernel source referenced + and following the instructions on the on: + https://www.raspberrypi.org/documentation/linux/kernel/building.md + """ + + deb_url = ('http://archive.raspberrypi.org/debian/' + 'pool/main/r/raspberrypi-firmware/' + 'raspberrypi-kernel_1.20230106-1_arm64.deb') + deb_hash = '08dc55696535b18a6d4fe6fa10d4c0d905cbb2ed' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, '/boot/kernel8.img') + dtb_path = self.extract_from_deb(deb_path, '/boot/bcm2711-rpi-4-b.dtb') + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'earlycon=pl011,mmio32,0xfe201000 ' + + 'console=ttyAMA0,115200 ' + + 'root=/dev/mmcblk1p2 rootwait ' + + 'dwc_otg.fiq_fsm_enable=0') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-append', kernel_command_line) + # When PCI is supported we can add a USB controller: + # '-device', 'qemu-xhci,bus=pcie.1,id=xhci', + # '-device', 'usb-kbd,bus=xhci.0', + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + # When USB is enabled we can look for this + # console_pattern = 'Product: QEMU USB Keyboard' + # self.wait_for_console_pattern(console_pattern) + console_pattern = 'Waiting for root device' + self.wait_for_console_pattern(console_pattern) + + + def test_arm_raspi4_initrd(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:raspi4b + :avocado: tags=device:pl011 + :avocado: tags=accel:tcg + :avocado: tags=rpi4b + + The kernel can be rebuilt using the kernel source referenced + and following the instructions on the on: + https://www.raspberrypi.org/documentation/linux/kernel/building.md + """ + deb_url = ('http://archive.raspberrypi.org/debian/' + 'pool/main/r/raspberrypi-firmware/' + 'raspberrypi-kernel_1.20230106-1_arm64.deb') + deb_hash = '08dc55696535b18a6d4fe6fa10d4c0d905cbb2ed' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, '/boot/kernel8.img') + dtb_path = self.extract_from_deb(deb_path, '/boot/bcm2711-rpi-4-b.dtb') + + initrd_url = ('https://github.com/groeck/linux-build-test/raw/' + '86b2be1384d41c8c388e63078a847f1e1c4cb1de/rootfs/' + 'arm64/rootfs.cpio.gz') + initrd_hash = 'f3d4f9fa92a49aa542f1b44d34be77bbf8ca5b9d' + initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + initrd_path = os.path.join(self.workdir, 'rootfs.cpio') + archive.gzip_uncompress(initrd_path_gz, initrd_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'earlycon=pl011,mmio32,0xfe201000 ' + + 'console=ttyAMA0,115200 ' + + 'panic=-1 noreboot ' + + 'dwc_otg.fiq_fsm_enable=0') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-initrd', initrd_path, + '-append', kernel_command_line, + '-no-reboot') + # When PCI is supported we can add a USB controller: + # '-device', 'qemu-xhci,bus=pcie.1,id=xhci', + # '-device', 'usb-kbd,bus=xhci.0', + self.vm.launch() + self.wait_for_console_pattern('Boot successful.') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'BCM2835') + exec_command_and_wait_for_pattern(self, 'cat /proc/iomem', + 'cprman@7e101000') + exec_command_and_wait_for_pattern(self, 'halt', 'reboot: System halted') + # TODO: Raspberry Pi4 doesn't shut down properly with recent kernels + # Wait for VM to shut down gracefully + #self.vm.wait() + def test_arm_exynos4210_initrd(self): """ :avocado: tags=arch:arm -- cgit v1.1