From 0f4fcf1845fe188901d4ff4cc807bd78690dddd0 Mon Sep 17 00:00:00 2001 From: Xiaojuan Yang Date: Mon, 6 Jun 2022 20:43:22 +0800 Subject: hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC) This patch realize the PCH-PIC interrupt controller. Signed-off-by: Xiaojuan Yang Signed-off-by: Song Gao Reviewed-by: Richard Henderson Message-Id: <20220606124333.2060567-33-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson --- include/hw/intc/loongarch_pch_pic.h | 69 +++++++++++++++++++++++++++++++++++++ include/hw/pci-host/ls7a.h | 30 ++++++++++++++++ 2 files changed, 99 insertions(+) create mode 100644 include/hw/intc/loongarch_pch_pic.h create mode 100644 include/hw/pci-host/ls7a.h (limited to 'include') diff --git a/include/hw/intc/loongarch_pch_pic.h b/include/hw/intc/loongarch_pch_pic.h new file mode 100644 index 0000000..2d4aa9e --- /dev/null +++ b/include/hw/intc/loongarch_pch_pic.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * LoongArch 7A1000 I/O interrupt controller definitions + * + * Copyright (c) 2021 Loongson Technology Corporation Limited + */ + +#define TYPE_LOONGARCH_PCH_PIC "loongarch_pch_pic" +#define PCH_PIC_NAME(name) TYPE_LOONGARCH_PCH_PIC#name +OBJECT_DECLARE_SIMPLE_TYPE(LoongArchPCHPIC, LOONGARCH_PCH_PIC) + +#define PCH_PIC_IRQ_START 0 +#define PCH_PIC_IRQ_END 63 +#define PCH_PIC_IRQ_NUM 64 +#define PCH_PIC_INT_ID_VAL 0x7000000UL +#define PCH_PIC_INT_ID_NUM 0x3f0001UL + +#define PCH_PIC_INT_ID_LO 0x00 +#define PCH_PIC_INT_ID_HI 0x04 +#define PCH_PIC_INT_MASK_LO 0x20 +#define PCH_PIC_INT_MASK_HI 0x24 +#define PCH_PIC_HTMSI_EN_LO 0x40 +#define PCH_PIC_HTMSI_EN_HI 0x44 +#define PCH_PIC_INT_EDGE_LO 0x60 +#define PCH_PIC_INT_EDGE_HI 0x64 +#define PCH_PIC_INT_CLEAR_LO 0x80 +#define PCH_PIC_INT_CLEAR_HI 0x84 +#define PCH_PIC_AUTO_CTRL0_LO 0xc0 +#define PCH_PIC_AUTO_CTRL0_HI 0xc4 +#define PCH_PIC_AUTO_CTRL1_LO 0xe0 +#define PCH_PIC_AUTO_CTRL1_HI 0xe4 +#define PCH_PIC_ROUTE_ENTRY_OFFSET 0x100 +#define PCH_PIC_ROUTE_ENTRY_END 0x13f +#define PCH_PIC_HTMSI_VEC_OFFSET 0x200 +#define PCH_PIC_HTMSI_VEC_END 0x23f +#define PCH_PIC_INT_STATUS_LO 0x3a0 +#define PCH_PIC_INT_STATUS_HI 0x3a4 +#define PCH_PIC_INT_POL_LO 0x3e0 +#define PCH_PIC_INT_POL_HI 0x3e4 + +#define STATUS_LO_START 0 +#define STATUS_HI_START 0x4 +#define POL_LO_START 0x40 +#define POL_HI_START 0x44 +struct LoongArchPCHPIC { + SysBusDevice parent_obj; + qemu_irq parent_irq[64]; + uint64_t int_mask; /*0x020 interrupt mask register*/ + uint64_t htmsi_en; /*0x040 1=msi*/ + uint64_t intedge; /*0x060 edge=1 level =0*/ + uint64_t intclr; /*0x080 for clean edge int,set 1 clean,set 0 is noused*/ + uint64_t auto_crtl0; /*0x0c0*/ + uint64_t auto_crtl1; /*0x0e0*/ + uint64_t last_intirr; /* edge detection */ + uint64_t intirr; /* 0x380 interrupt request register */ + uint64_t intisr; /* 0x3a0 interrupt service register */ + /* + * 0x3e0 interrupt level polarity selection + * register 0 for high level trigger + */ + uint64_t int_polarity; + + uint8_t route_entry[64]; /*0x100 - 0x138*/ + uint8_t htmsi_vector[64]; /*0x200 - 0x238*/ + + MemoryRegion iomem32_low; + MemoryRegion iomem32_high; + MemoryRegion iomem8; +}; diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h new file mode 100644 index 0000000..bf80e99 --- /dev/null +++ b/include/hw/pci-host/ls7a.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * QEMU LoongArch CPU + * + * Copyright (c) 2021 Loongson Technology Corporation Limited + */ + +#ifndef HW_LS7A_H +#define HW_LS7A_H + +#include "hw/pci/pci.h" +#include "hw/pci/pcie_host.h" +#include "hw/pci-host/pam.h" +#include "qemu/units.h" +#include "qemu/range.h" +#include "qom/object.h" + +#define LS7A_PCH_REG_BASE 0x10000000UL +#define LS7A_IOAPIC_REG_BASE (LS7A_PCH_REG_BASE) +#define LS7A_PCH_MSI_ADDR_LOW 0x2FF00000UL + +/* + * According to the kernel pch irq start from 64 offset + * 0 ~ 16 irqs used for non-pci device while 16 ~ 64 irqs + * used for pci device. + */ +#define PCH_PIC_IRQ_OFFSET 64 +#define LS7A_DEVICE_IRQS 16 +#define LS7A_PCI_IRQS 48 +#endif -- cgit v1.1