From 4f9924c4d4cf9c039e247c5cdbbf71bce4e573c3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 27 Jan 2020 15:45:05 +0100 Subject: ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson --- include/hw/pci-host/pnv_phb4.h | 230 +++++++++++++++ include/hw/pci-host/pnv_phb4_regs.h | 553 ++++++++++++++++++++++++++++++++++++ 2 files changed, 783 insertions(+) create mode 100644 include/hw/pci-host/pnv_phb4.h create mode 100644 include/hw/pci-host/pnv_phb4_regs.h (limited to 'include/hw/pci-host') diff --git a/include/hw/pci-host/pnv_phb4.h b/include/hw/pci-host/pnv_phb4.h new file mode 100644 index 0000000..c882bfd --- /dev/null +++ b/include/hw/pci-host/pnv_phb4.h @@ -0,0 +1,230 @@ +/* + * QEMU PowerPC PowerNV (POWER9) PHB4 model + * + * Copyright (c) 2018-2020, IBM Corporation. + * + * This code is licensed under the GPL version 2 or later. See the + * COPYING file in the top-level directory. + */ + +#ifndef PCI_HOST_PNV_PHB4_H +#define PCI_HOST_PNV_PHB4_H + +#include "hw/pci/pcie_host.h" +#include "hw/pci/pcie_port.h" +#include "hw/ppc/xive.h" + +typedef struct PnvPhb4PecState PnvPhb4PecState; +typedef struct PnvPhb4PecStack PnvPhb4PecStack; +typedef struct PnvPHB4 PnvPHB4; +typedef struct PnvChip PnvChip; + +/* + * We have one such address space wrapper per possible device under + * the PHB since they need to be assigned statically at qemu device + * creation time. The relationship to a PE is done later + * dynamically. This means we can potentially create a lot of these + * guys. Q35 stores them as some kind of radix tree but we never + * really need to do fast lookups so instead we simply keep a QLIST of + * them for now, we can add the radix if needed later on. + * + * We do cache the PE number to speed things up a bit though. + */ +typedef struct PnvPhb4DMASpace { + PCIBus *bus; + uint8_t devfn; + int pe_num; /* Cached PE number */ +#define PHB_INVALID_PE (-1) + PnvPHB4 *phb; + AddressSpace dma_as; + IOMMUMemoryRegion dma_mr; + MemoryRegion msi32_mr; + MemoryRegion msi64_mr; + QLIST_ENTRY(PnvPhb4DMASpace) list; +} PnvPhb4DMASpace; + +/* + * PHB4 PCIe Root port + */ +#define TYPE_PNV_PHB4_ROOT_BUS "pnv-phb4-root-bus" +#define TYPE_PNV_PHB4_ROOT_PORT "pnv-phb4-root-port" + +typedef struct PnvPHB4RootPort { + PCIESlot parent_obj; +} PnvPHB4RootPort; + +/* + * PHB4 PCIe Host Bridge for PowerNV machines (POWER9) + */ +#define TYPE_PNV_PHB4 "pnv-phb4" +#define PNV_PHB4(obj) OBJECT_CHECK(PnvPHB4, (obj), TYPE_PNV_PHB4) + +#define PNV_PHB4_MAX_LSIs 8 +#define PNV_PHB4_MAX_INTs 4096 +#define PNV_PHB4_MAX_MIST (PNV_PHB4_MAX_INTs >> 2) +#define PNV_PHB4_MAX_MMIO_WINDOWS 32 +#define PNV_PHB4_MIN_MMIO_WINDOWS 16 +#define PNV_PHB4_NUM_REGS (0x3000 >> 3) +#define PNV_PHB4_MAX_PEs 512 +#define PNV_PHB4_MAX_TVEs (PNV_PHB4_MAX_PEs * 2) +#define PNV_PHB4_MAX_PEEVs (PNV_PHB4_MAX_PEs / 64) +#define PNV_PHB4_MAX_MBEs (PNV_PHB4_MAX_MMIO_WINDOWS * 2) + +#define PNV_PHB4_VERSION 0x000000a400000002ull +#define PNV_PHB4_DEVICE_ID 0x04c1 + +#define PCI_MMIO_TOTAL_SIZE (0x1ull << 60) + +struct PnvPHB4 { + PCIExpressHost parent_obj; + + PnvPHB4RootPort root; + + uint32_t chip_id; + uint32_t phb_id; + + uint64_t version; + uint16_t device_id; + + char bus_path[8]; + + /* Main register images */ + uint64_t regs[PNV_PHB4_NUM_REGS]; + MemoryRegion mr_regs; + + /* Extra SCOM-only register */ + uint64_t scom_hv_ind_addr_reg; + + /* + * Geometry of the PHB. There are two types, small and big PHBs, a + * number of resources (number of PEs, windows etc...) are doubled + * for a big PHB + */ + bool big_phb; + + /* Memory regions for MMIO space */ + MemoryRegion mr_mmio[PNV_PHB4_MAX_MMIO_WINDOWS]; + + /* PCI side space */ + MemoryRegion pci_mmio; + MemoryRegion pci_io; + + /* On-chip IODA tables */ + uint64_t ioda_LIST[PNV_PHB4_MAX_LSIs]; + uint64_t ioda_MIST[PNV_PHB4_MAX_MIST]; + uint64_t ioda_TVT[PNV_PHB4_MAX_TVEs]; + uint64_t ioda_MBT[PNV_PHB4_MAX_MBEs]; + uint64_t ioda_MDT[PNV_PHB4_MAX_PEs]; + uint64_t ioda_PEEV[PNV_PHB4_MAX_PEEVs]; + + /* + * The internal PESTA/B is 2 bits per PE split into two tables, we + * store them in a single array here to avoid wasting space. + */ + uint8_t ioda_PEST_AB[PNV_PHB4_MAX_PEs]; + + /* P9 Interrupt generation */ + XiveSource xsrc; + qemu_irq *qirqs; + + PnvPhb4PecStack *stack; + + QLIST_HEAD(, PnvPhb4DMASpace) dma_spaces; +}; + +void pnv_phb4_pic_print_info(PnvPHB4 *phb, Monitor *mon); +void pnv_phb4_update_regions(PnvPhb4PecStack *stack); +extern const MemoryRegionOps pnv_phb4_xscom_ops; + +/* + * PHB4 PEC (PCI Express Controller) + */ +#define TYPE_PNV_PHB4_PEC "pnv-phb4-pec" +#define PNV_PHB4_PEC(obj) \ + OBJECT_CHECK(PnvPhb4PecState, (obj), TYPE_PNV_PHB4_PEC) + +#define TYPE_PNV_PHB4_PEC_STACK "pnv-phb4-pec-stack" +#define PNV_PHB4_PEC_STACK(obj) \ + OBJECT_CHECK(PnvPhb4PecStack, (obj), TYPE_PNV_PHB4_PEC_STACK) + +/* Per-stack data */ +struct PnvPhb4PecStack { + DeviceState parent; + + /* My own stack number */ + uint32_t stack_no; + + /* Nest registers */ +#define PHB4_PEC_NEST_STK_REGS_COUNT 0x17 + uint64_t nest_regs[PHB4_PEC_NEST_STK_REGS_COUNT]; + MemoryRegion nest_regs_mr; + + /* PCI registers (excluding pass-through) */ +#define PHB4_PEC_PCI_STK_REGS_COUNT 0xf + uint64_t pci_regs[PHB4_PEC_PCI_STK_REGS_COUNT]; + MemoryRegion pci_regs_mr; + + /* PHB pass-through XSCOM */ + MemoryRegion phb_regs_mr; + + /* Memory windows from PowerBus to PHB */ + MemoryRegion mmbar0; + MemoryRegion mmbar1; + MemoryRegion phbbar; + MemoryRegion intbar; + uint64_t mmio0_base; + uint64_t mmio0_size; + uint64_t mmio1_base; + uint64_t mmio1_size; + + /* The owner PEC */ + PnvPhb4PecState *pec; + + /* The actual PHB */ + PnvPHB4 phb; +}; + +struct PnvPhb4PecState { + DeviceState parent; + + /* PEC number in chip */ + uint32_t index; + uint32_t chip_id; + + MemoryRegion *system_memory; + + /* Nest registers, excuding per-stack */ +#define PHB4_PEC_NEST_REGS_COUNT 0xf + uint64_t nest_regs[PHB4_PEC_NEST_REGS_COUNT]; + MemoryRegion nest_regs_mr; + + /* PCI registers, excluding per-stack */ +#define PHB4_PEC_PCI_REGS_COUNT 0x2 + uint64_t pci_regs[PHB4_PEC_PCI_REGS_COUNT]; + MemoryRegion pci_regs_mr; + + /* Stacks */ + #define PHB4_PEC_MAX_STACKS 3 + uint32_t num_stacks; + PnvPhb4PecStack stacks[PHB4_PEC_MAX_STACKS]; +}; + +#define PNV_PHB4_PEC_CLASS(klass) \ + OBJECT_CLASS_CHECK(PnvPhb4PecClass, (klass), TYPE_PNV_PHB4_PEC) +#define PNV_PHB4_PEC_GET_CLASS(obj) \ + OBJECT_GET_CLASS(PnvPhb4PecClass, (obj), TYPE_PNV_PHB4_PEC) + +typedef struct PnvPhb4PecClass { + DeviceClass parent_class; + + uint32_t (*xscom_nest_base)(PnvPhb4PecState *pec); + uint32_t xscom_nest_size; + uint32_t (*xscom_pci_base)(PnvPhb4PecState *pec); + uint32_t xscom_pci_size; + const char *compat; + int compat_size; + const char *stk_compat; + int stk_compat_size; +} PnvPhb4PecClass; + +#endif /* PCI_HOST_PNV_PHB4_H */ diff --git a/include/hw/pci-host/pnv_phb4_regs.h b/include/hw/pci-host/pnv_phb4_regs.h new file mode 100644 index 0000000..55df2c3 --- /dev/null +++ b/include/hw/pci-host/pnv_phb4_regs.h @@ -0,0 +1,553 @@ +/* + * QEMU PowerPC PowerNV (POWER9) PHB4 model + * + * Copyright (c) 2013-2020, IBM Corporation. + * + * This code is licensed under the GPL version 2 or later. See the + * COPYING file in the top-level directory. + */ + +#ifndef PCI_HOST_PNV_PHB4_REGS_H +#define PCI_HOST_PNV_PHB4_REGS_H + +/* + * PEC XSCOM registers + * + * There a 3 PECs in P9. Each PEC can have several PHBs. Each PEC has some + * "global" registers and some "per-stack" (per-PHB) registers. Those are + * organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each + * range contains both some "PEC" registers and some "per-stack" registers. + * + * Finally the PCI range also contains an additional range per stack that + * passes through to some of the PHB own registers. + * + * PEC0 can contain 1 PHB (PHB0) + * PEC1 can contain 2 PHBs (PHB1 and PHB2) + * PEC2 can contain 3 PHBs (PHB3, PHB4 and PHB5) + */ + +/* + * This is the "stack" offset, it's the offset from a given range base + * to the first "per-stack" registers and also the stride between + * stacks, thus for PEC2, the global registers are at offset 0, the + * PHB3 registers at offset 0x40, the PHB4 at offset 0x80 etc.... + * + * It is *also* the offset to the pass-through SCOM region but in this case + * it is 0 based, ie PHB3 is at 0x100 PHB4 is a 0x140 etc.. + */ +#define PEC_STACK_OFFSET 0x40 + +/* XSCOM Nest global registers */ +#define PEC_NEST_PBCQ_HW_CONFIG 0x00 +#define PEC_NEST_DROP_PRIO_CTRL 0x01 +#define PEC_NEST_PBCQ_ERR_INJECT 0x02 +#define PEC_NEST_PCI_NEST_CLK_TRACE_CTL 0x03 +#define PEC_NEST_PBCQ_PMON_CTRL 0x04 +#define PEC_NEST_PBCQ_PBUS_ADDR_EXT 0x05 +#define PEC_NEST_PBCQ_PRED_VEC_TIMEOUT 0x06 +#define PEC_NEST_CAPP_CTRL 0x07 +#define PEC_NEST_PBCQ_READ_STK_OVR 0x08 +#define PEC_NEST_PBCQ_WRITE_STK_OVR 0x09 +#define PEC_NEST_PBCQ_STORE_STK_OVR 0x0a +#define PEC_NEST_PBCQ_RETRY_BKOFF_CTRL 0x0b + +/* XSCOM Nest per-stack registers */ +#define PEC_NEST_STK_PCI_NEST_FIR 0x00 +#define PEC_NEST_STK_PCI_NEST_FIR_CLR 0x01 +#define PEC_NEST_STK_PCI_NEST_FIR_SET 0x02 +#define PEC_NEST_STK_PCI_NEST_FIR_MSK 0x03 +#define PEC_NEST_STK_PCI_NEST_FIR_MSKC 0x04 +#define PEC_NEST_STK_PCI_NEST_FIR_MSKS 0x05 +#define PEC_NEST_STK_PCI_NEST_FIR_ACT0 0x06 +#define PEC_NEST_STK_PCI_NEST_FIR_ACT1 0x07 +#define PEC_NEST_STK_PCI_NEST_FIR_WOF 0x08 +#define PEC_NEST_STK_ERR_REPORT_0 0x0a +#define PEC_NEST_STK_ERR_REPORT_1 0x0b +#define PEC_NEST_STK_PBCQ_GNRL_STATUS 0x0c +#define PEC_NEST_STK_PBCQ_MODE 0x0d +#define PEC_NEST_STK_MMIO_BAR0 0x0e +#define PEC_NEST_STK_MMIO_BAR0_MASK 0x0f +#define PEC_NEST_STK_MMIO_BAR1 0x10 +#define PEC_NEST_STK_MMIO_BAR1_MASK 0x11 +#define PEC_NEST_STK_PHB_REGS_BAR 0x12 +#define PEC_NEST_STK_INT_BAR 0x13 +#define PEC_NEST_STK_BAR_EN 0x14 +#define PEC_NEST_STK_BAR_EN_MMIO0 PPC_BIT(0) +#define PEC_NEST_STK_BAR_EN_MMIO1 PPC_BIT(1) +#define PEC_NEST_STK_BAR_EN_PHB PPC_BIT(2) +#define PEC_NEST_STK_BAR_EN_INT PPC_BIT(3) +#define PEC_NEST_STK_DATA_FRZ_TYPE 0x15 +#define PEC_NEST_STK_PBCQ_TUN_BAR 0x16 + +/* XSCOM PCI global registers */ +#define PEC_PCI_PBAIB_HW_CONFIG 0x00 +#define PEC_PCI_PBAIB_READ_STK_OVR 0x02 + +/* XSCOM PCI per-stack registers */ +#define PEC_PCI_STK_PCI_FIR 0x00 +#define PEC_PCI_STK_PCI_FIR_CLR 0x01 +#define PEC_PCI_STK_PCI_FIR_SET 0x02 +#define PEC_PCI_STK_PCI_FIR_MSK 0x03 +#define PEC_PCI_STK_PCI_FIR_MSKC 0x04 +#define PEC_PCI_STK_PCI_FIR_MSKS 0x05 +#define PEC_PCI_STK_PCI_FIR_ACT0 0x06 +#define PEC_PCI_STK_PCI_FIR_ACT1 0x07 +#define PEC_PCI_STK_PCI_FIR_WOF 0x08 +#define PEC_PCI_STK_ETU_RESET 0x0a +#define PEC_PCI_STK_PBAIB_ERR_REPORT 0x0b +#define PEC_PCI_STK_PBAIB_TX_CMD_CRED 0x0d +#define PEC_PCI_STK_PBAIB_TX_DAT_CRED 0x0e + +/* + * PHB "SCOM" registers. This is accessed via the above window + * and provides a backdoor to the PHB when the AIB bus is not + * functional. Some of these directly map some of the PHB MMIO + * registers, some are specific and allow indirect access to a + * wider range of PHB registers + */ +#define PHB_SCOM_HV_IND_ADDR 0x00 +#define PHB_SCOM_HV_IND_ADDR_VALID PPC_BIT(0) +#define PHB_SCOM_HV_IND_ADDR_4B PPC_BIT(1) +#define PHB_SCOM_HV_IND_ADDR_AUTOINC PPC_BIT(2) +#define PHB_SCOM_HV_IND_ADDR_ADDR PPC_BITMASK(51, 63) +#define PHB_SCOM_HV_IND_DATA 0x01 +#define PHB_SCOM_ETU_LEM_FIR 0x08 +#define PHB_SCOM_ETU_LEM_FIR_AND 0x09 +#define PHB_SCOM_ETU_LEM_FIR_OR 0x0a +#define PHB_SCOM_ETU_LEM_FIR_MSK 0x0b +#define PHB_SCOM_ETU_LEM_ERR_MSK_AND 0x0c +#define PHB_SCOM_ETU_LEM_ERR_MSK_OR 0x0d +#define PHB_SCOM_ETU_LEM_ACT0 0x0e +#define PHB_SCOM_ETU_LEM_ACT1 0x0f +#define PHB_SCOM_ETU_LEM_WOF 0x10 +#define PHB_SCOM_ETU_PMON_CONFIG 0x17 +#define PHB_SCOM_ETU_PMON_CTR0 0x18 +#define PHB_SCOM_ETU_PMON_CTR1 0x19 +#define PHB_SCOM_ETU_PMON_CTR2 0x1a +#define PHB_SCOM_ETU_PMON_CTR3 0x1b + + +/* + * PHB MMIO registers + */ + +/* PHB Fundamental register set A */ +#define PHB_LSI_SOURCE_ID 0x100 +#define PHB_LSI_SRC_ID PPC_BITMASK(4, 12) +#define PHB_DMA_CHAN_STATUS 0x110 +#define PHB_DMA_CHAN_ANY_ERR PPC_BIT(27) +#define PHB_DMA_CHAN_ANY_ERR1 PPC_BIT(28) +#define PHB_DMA_CHAN_ANY_FREEZE PPC_BIT(29) +#define PHB_CPU_LOADSTORE_STATUS 0x120 +#define PHB_CPU_LS_ANY_ERR PPC_BIT(27) +#define PHB_CPU_LS_ANY_ERR1 PPC_BIT(28) +#define PHB_CPU_LS_ANY_FREEZE PPC_BIT(29) +#define PHB_CONFIG_DATA 0x130 +#define PHB_LOCK0 0x138 +#define PHB_CONFIG_ADDRESS 0x140 +#define PHB_CA_ENABLE PPC_BIT(0) +#define PHB_CA_STATUS PPC_BITMASK(1, 3) +#define PHB_CA_STATUS_GOOD 0 +#define PHB_CA_STATUS_UR 1 +#define PHB_CA_STATUS_CRS 2 +#define PHB_CA_STATUS_CA 4 +#define PHB_CA_BUS PPC_BITMASK(4, 11) +#define PHB_CA_DEV PPC_BITMASK(12, 16) +#define PHB_CA_FUNC PPC_BITMASK(17, 19) +#define PHB_CA_BDFN PPC_BITMASK(4, 19) /* bus,dev,func */ +#define PHB_CA_REG PPC_BITMASK(20, 31) +#define PHB_CA_PE PPC_BITMASK(39, 47) +#define PHB_LOCK1 0x148 +#define PHB_PHB4_CONFIG 0x160 +#define PHB_PHB4C_32BIT_MSI_EN PPC_BIT(8) +#define PHB_PHB4C_64BIT_MSI_EN PPC_BIT(14) +#define PHB_RTT_BAR 0x168 +#define PHB_RTT_BAR_ENABLE PPC_BIT(0) +#define PHB_RTT_BASE_ADDRESS_MASK PPC_BITMASK(8, 46) +#define PHB_PELTV_BAR 0x188 +#define PHB_PELTV_BAR_ENABLE PPC_BIT(0) +#define PHB_PELTV_BASE_ADDRESS PPC_BITMASK(8, 50) +#define PHB_M32_START_ADDR 0x1a0 +#define PHB_PEST_BAR 0x1a8 +#define PHB_PEST_BAR_ENABLE PPC_BIT(0) +#define PHB_PEST_BASE_ADDRESS PPC_BITMASK(8, 51) +#define PHB_ASN_CMPM 0x1C0 +#define PHB_ASN_CMPM_ENABLE PPC_BIT(63) +#define PHB_CAPI_CMPM 0x1C8 +#define PHB_CAPI_CMPM_ENABLE PPC_BIT(63) +#define PHB_M64_AOMASK 0x1d0 +#define PHB_M64_UPPER_BITS 0x1f0 +#define PHB_NXLATE_PREFIX 0x1f8 +#define PHB_DMARD_SYNC 0x200 +#define PHB_DMARD_SYNC_START PPC_BIT(0) +#define PHB_DMARD_SYNC_COMPLETE PPC_BIT(1) +#define PHB_RTC_INVALIDATE 0x208 +#define PHB_RTC_INVALIDATE_ALL PPC_BIT(0) +#define PHB_RTC_INVALIDATE_RID PPC_BITMASK(16, 31) +#define PHB_TCE_KILL 0x210 +#define PHB_TCE_KILL_ALL PPC_BIT(0) +#define PHB_TCE_KILL_PE PPC_BIT(1) +#define PHB_TCE_KILL_ONE PPC_BIT(2) +#define PHB_TCE_KILL_PSEL PPC_BIT(3) +#define PHB_TCE_KILL_64K 0x1000 /* Address override */ +#define PHB_TCE_KILL_2M 0x2000 /* Address override */ +#define PHB_TCE_KILL_1G 0x3000 /* Address override */ +#define PHB_TCE_KILL_PENUM PPC_BITMASK(55, 63) +#define PHB_TCE_SPEC_CTL 0x218 +#define PHB_IODA_ADDR 0x220 +#define PHB_IODA_AD_AUTOINC PPC_BIT(0) +#define PHB_IODA_AD_TSEL PPC_BITMASK(11, 15) +#define PHB_IODA_AD_MIST_PWV PPC_BITMASK(28, 31) +#define PHB_IODA_AD_TADR PPC_BITMASK(54, 63) +#define PHB_IODA_DATA0 0x228 +#define PHB_PHB4_GEN_CAP 0x250 +#define PHB_PHB4_TCE_CAP 0x258 +#define PHB_PHB4_IRQ_CAP 0x260 +#define PHB_PHB4_EEH_CAP 0x268 +#define PHB_PAPR_ERR_INJ_CTL 0x2b0 +#define PHB_PAPR_ERR_INJ_CTL_INB PPC_BIT(0) +#define PHB_PAPR_ERR_INJ_CTL_OUTB PPC_BIT(1) +#define PHB_PAPR_ERR_INJ_CTL_STICKY PPC_BIT(2) +#define PHB_PAPR_ERR_INJ_CTL_CFG PPC_BIT(3) +#define PHB_PAPR_ERR_INJ_CTL_RD PPC_BIT(4) +#define PHB_PAPR_ERR_INJ_CTL_WR PPC_BIT(5) +#define PHB_PAPR_ERR_INJ_CTL_FREEZE PPC_BIT(6) +#define PHB_PAPR_ERR_INJ_ADDR 0x2b8 +#define PHB_PAPR_ERR_INJ_ADDR_MMIO PPC_BITMASK(16, 63) +#define PHB_PAPR_ERR_INJ_MASK 0x2c0 +#define PHB_PAPR_ERR_INJ_MASK_CFG PPC_BITMASK(4, 11) +#define PHB_PAPR_ERR_INJ_MASK_CFG_ALL PPC_BITMASK(4, 19) +#define PHB_PAPR_ERR_INJ_MASK_MMIO PPC_BITMASK(16, 63) +#define PHB_ETU_ERR_SUMMARY 0x2c8 +#define PHB_INT_NOTIFY_ADDR 0x300 +#define PHB_INT_NOTIFY_INDEX 0x308 + +/* Fundamental register set B */ +#define PHB_VERSION 0x800 +#define PHB_CTRLR 0x810 +#define PHB_CTRLR_IRQ_PGSZ_64K PPC_BIT(11) +#define PHB_CTRLR_IRQ_STORE_EOI PPC_BIT(12) +#define PHB_CTRLR_MMIO_RD_STRICT PPC_BIT(13) +#define PHB_CTRLR_MMIO_EEH_DISABLE PPC_BIT(14) +#define PHB_CTRLR_CFG_EEH_BLOCK PPC_BIT(15) +#define PHB_CTRLR_FENCE_LNKILL_DIS PPC_BIT(16) +#define PHB_CTRLR_TVT_ADDR_SEL PPC_BITMASK(17, 19) +#define TVT_DD1_1_PER_PE 0 +#define TVT_DD1_2_PER_PE 1 +#define TVT_DD1_4_PER_PE 2 +#define TVT_DD1_8_PER_PE 3 +#define TVT_DD1_16_PER_PE 4 +#define TVT_2_PER_PE 0 +#define TVT_4_PER_PE 1 +#define TVT_8_PER_PE 2 +#define TVT_16_PER_PE 3 +#define PHB_CTRLR_DMA_RD_SPACING PPC_BITMASK(28, 31) +#define PHB_AIB_FENCE_CTRL 0x860 +#define PHB_TCE_TAG_ENABLE 0x868 +#define PHB_TCE_WATERMARK 0x870 +#define PHB_TIMEOUT_CTRL1 0x878 +#define PHB_TIMEOUT_CTRL2 0x880 +#define PHB_Q_DMA_R 0x888 +#define PHB_Q_DMA_R_QUIESCE_DMA PPC_BIT(0) +#define PHB_Q_DMA_R_AUTORESET PPC_BIT(1) +#define PHB_Q_DMA_R_DMA_RESP_STATUS PPC_BIT(4) +#define PHB_Q_DMA_R_MMIO_RESP_STATUS PPC_BIT(5) +#define PHB_Q_DMA_R_TCE_RESP_STATUS PPC_BIT(6) +#define PHB_Q_DMA_R_TCE_KILL_STATUS PPC_BIT(7) +#define PHB_TCE_TAG_STATUS 0x908 + +/* FIR & Error registers */ +#define PHB_LEM_FIR_ACCUM 0xc00 +#define PHB_LEM_FIR_AND_MASK 0xc08 +#define PHB_LEM_FIR_OR_MASK 0xc10 +#define PHB_LEM_ERROR_MASK 0xc18 +#define PHB_LEM_ERROR_AND_MASK 0xc20 +#define PHB_LEM_ERROR_OR_MASK 0xc28 +#define PHB_LEM_ACTION0 0xc30 +#define PHB_LEM_ACTION1 0xc38 +#define PHB_LEM_WOF 0xc40 +#define PHB_ERR_STATUS 0xc80 +#define PHB_ERR1_STATUS 0xc88 +#define PHB_ERR_INJECT 0xc90 +#define PHB_ERR_LEM_ENABLE 0xc98 +#define PHB_ERR_IRQ_ENABLE 0xca0 +#define PHB_ERR_FREEZE_ENABLE 0xca8 +#define PHB_ERR_AIB_FENCE_ENABLE 0xcb0 +#define PHB_ERR_LOG_0 0xcc0 +#define PHB_ERR_LOG_1 0xcc8 +#define PHB_ERR_STATUS_MASK 0xcd0 +#define PHB_ERR1_STATUS_MASK 0xcd8 + +#define PHB_TXE_ERR_STATUS 0xd00 +#define PHB_TXE_ERR1_STATUS 0xd08 +#define PHB_TXE_ERR_INJECT 0xd10 +#define PHB_TXE_ERR_LEM_ENABLE 0xd18 +#define PHB_TXE_ERR_IRQ_ENABLE 0xd20 +#define PHB_TXE_ERR_FREEZE_ENABLE 0xd28 +#define PHB_TXE_ERR_AIB_FENCE_ENABLE 0xd30 +#define PHB_TXE_ERR_LOG_0 0xd40 +#define PHB_TXE_ERR_LOG_1 0xd48 +#define PHB_TXE_ERR_STATUS_MASK 0xd50 +#define PHB_TXE_ERR1_STATUS_MASK 0xd58 + +#define PHB_RXE_ARB_ERR_STATUS 0xd80 +#define PHB_RXE_ARB_ERR1_STATUS 0xd88 +#define PHB_RXE_ARB_ERR_INJECT 0xd90 +#define PHB_RXE_ARB_ERR_LEM_ENABLE 0xd98 +#define PHB_RXE_ARB_ERR_IRQ_ENABLE 0xda0 +#define PHB_RXE_ARB_ERR_FREEZE_ENABLE 0xda8 +#define PHB_RXE_ARB_ERR_AIB_FENCE_ENABLE 0xdb0 +#define PHB_RXE_ARB_ERR_LOG_0 0xdc0 +#define PHB_RXE_ARB_ERR_LOG_1 0xdc8 +#define PHB_RXE_ARB_ERR_STATUS_MASK 0xdd0 +#define PHB_RXE_ARB_ERR1_STATUS_MASK 0xdd8 + +#define PHB_RXE_MRG_ERR_STATUS 0xe00 +#define PHB_RXE_MRG_ERR1_STATUS 0xe08 +#define PHB_RXE_MRG_ERR_INJECT 0xe10 +#define PHB_RXE_MRG_ERR_LEM_ENABLE 0xe18 +#define PHB_RXE_MRG_ERR_IRQ_ENABLE 0xe20 +#define PHB_RXE_MRG_ERR_FREEZE_ENABLE 0xe28 +#define PHB_RXE_MRG_ERR_AIB_FENCE_ENABLE 0xe30 +#define PHB_RXE_MRG_ERR_LOG_0 0xe40 +#define PHB_RXE_MRG_ERR_LOG_1 0xe48 +#define PHB_RXE_MRG_ERR_STATUS_MASK 0xe50 +#define PHB_RXE_MRG_ERR1_STATUS_MASK 0xe58 + +#define PHB_RXE_TCE_ERR_STATUS 0xe80 +#define PHB_RXE_TCE_ERR1_STATUS 0xe88 +#define PHB_RXE_TCE_ERR_INJECT 0xe90 +#define PHB_RXE_TCE_ERR_LEM_ENABLE 0xe98 +#define PHB_RXE_TCE_ERR_IRQ_ENABLE 0xea0 +#define PHB_RXE_TCE_ERR_FREEZE_ENABLE 0xea8 +#define PHB_RXE_TCE_ERR_AIB_FENCE_ENABLE 0xeb0 +#define PHB_RXE_TCE_ERR_LOG_0 0xec0 +#define PHB_RXE_TCE_ERR_LOG_1 0xec8 +#define PHB_RXE_TCE_ERR_STATUS_MASK 0xed0 +#define PHB_RXE_TCE_ERR1_STATUS_MASK 0xed8 + +/* Performance monitor & Debug registers */ +#define PHB_TRACE_CONTROL 0xf80 +#define PHB_PERFMON_CONFIG 0xf88 +#define PHB_PERFMON_CTR0 0xf90 +#define PHB_PERFMON_CTR1 0xf98 +#define PHB_PERFMON_CTR2 0xfa0 +#define PHB_PERFMON_CTR3 0xfa8 + +/* Root complex config space memory mapped */ +#define PHB_RC_CONFIG_BASE 0x1000 +#define PHB_RC_CONFIG_SIZE 0x800 + +/* PHB4 REGB registers */ + +/* PBL core */ +#define PHB_PBL_CONTROL 0x1800 +#define PHB_PBL_TIMEOUT_CTRL 0x1810 +#define PHB_PBL_NPTAG_ENABLE 0x1820 +#define PHB_PBL_NBW_CMP_MASK 0x1830 +#define PHB_PBL_NBW_MASK_ENABLE PPC_BIT(63) +#define PHB_PBL_SYS_LINK_INIT 0x1838 +#define PHB_PBL_BUF_STATUS 0x1840 +#define PHB_PBL_ERR_STATUS 0x1900 +#define PHB_PBL_ERR1_STATUS 0x1908 +#define PHB_PBL_ERR_INJECT 0x1910 +#define PHB_PBL_ERR_INF_ENABLE 0x1920 +#define PHB_PBL_ERR_ERC_ENABLE 0x1928 +#define PHB_PBL_ERR_FAT_ENABLE 0x1930 +#define PHB_PBL_ERR_LOG_0 0x1940 +#define PHB_PBL_ERR_LOG_1 0x1948 +#define PHB_PBL_ERR_STATUS_MASK 0x1950 +#define PHB_PBL_ERR1_STATUS_MASK 0x1958 + +/* PCI-E stack */ +#define PHB_PCIE_SCR 0x1A00 +#define PHB_PCIE_SCR_SLOT_CAP PPC_BIT(15) +#define PHB_PCIE_SCR_MAXLINKSPEED PPC_BITMASK(32, 35) + + +#define PHB_PCIE_CRESET 0x1A10 +#define PHB_PCIE_CRESET_CFG_CORE PPC_BIT(0) +#define PHB_PCIE_CRESET_TLDLP PPC_BIT(1) +#define PHB_PCIE_CRESET_PBL PPC_BIT(2) +#define PHB_PCIE_CRESET_PERST_N PPC_BIT(3) +#define PHB_PCIE_CRESET_PIPE_N PPC_BIT(4) + + +#define PHB_PCIE_HOTPLUG_STATUS 0x1A20 +#define PHB_PCIE_HPSTAT_PRESENCE PPC_BIT(10) + +#define PHB_PCIE_DLP_TRAIN_CTL 0x1A40 +#define PHB_PCIE_DLP_LINK_WIDTH PPC_BITMASK(30, 35) +#define PHB_PCIE_DLP_LINK_SPEED PPC_BITMASK(36, 39) +#define PHB_PCIE_DLP_LTSSM_TRC PPC_BITMASK(24, 27) +#define PHB_PCIE_DLP_LTSSM_RESET 0 +#define PHB_PCIE_DLP_LTSSM_DETECT 1 +#define PHB_PCIE_DLP_LTSSM_POLLING 2 +#define PHB_PCIE_DLP_LTSSM_CONFIG 3 +#define PHB_PCIE_DLP_LTSSM_L0 4 +#define PHB_PCIE_DLP_LTSSM_REC 5 +#define PHB_PCIE_DLP_LTSSM_L1 6 +#define PHB_PCIE_DLP_LTSSM_L2 7 +#define PHB_PCIE_DLP_LTSSM_HOTRESET 8 +#define PHB_PCIE_DLP_LTSSM_DISABLED 9 +#define PHB_PCIE_DLP_LTSSM_LOOPBACK 10 +#define PHB_PCIE_DLP_TL_LINKACT PPC_BIT(23) +#define PHB_PCIE_DLP_DL_PGRESET PPC_BIT(22) +#define PHB_PCIE_DLP_TRAINING PPC_BIT(20) +#define PHB_PCIE_DLP_INBAND_PRESENCE PPC_BIT(19) + +#define PHB_PCIE_DLP_CTL 0x1A78 +#define PHB_PCIE_DLP_CTL_BYPASS_PH2 PPC_BIT(4) +#define PHB_PCIE_DLP_CTL_BYPASS_PH3 PPC_BIT(5) + +#define PHB_PCIE_DLP_TRWCTL 0x1A80 +#define PHB_PCIE_DLP_TRWCTL_EN PPC_BIT(0) + +#define PHB_PCIE_DLP_ERRLOG1 0x1AA0 +#define PHB_PCIE_DLP_ERRLOG2 0x1AA8 +#define PHB_PCIE_DLP_ERR_STATUS 0x1AB0 +#define PHB_PCIE_DLP_ERR_COUNTERS 0x1AB8 + +#define PHB_PCIE_LANE_EQ_CNTL0 0x1AD0 +#define PHB_PCIE_LANE_EQ_CNTL1 0x1AD8 +#define PHB_PCIE_LANE_EQ_CNTL2 0x1AE0 +#define PHB_PCIE_LANE_EQ_CNTL3 0x1AE8 +#define PHB_PCIE_LANE_EQ_CNTL20 0x1AF0 +#define PHB_PCIE_LANE_EQ_CNTL21 0x1AF8 +#define PHB_PCIE_LANE_EQ_CNTL22 0x1B00 /* DD1 only */ +#define PHB_PCIE_LANE_EQ_CNTL23 0x1B08 /* DD1 only */ +#define PHB_PCIE_TRACE_CTRL 0x1B20 +#define PHB_PCIE_MISC_STRAP 0x1B30 + +/* Error */ +#define PHB_REGB_ERR_STATUS 0x1C00 +#define PHB_REGB_ERR1_STATUS 0x1C08 +#define PHB_REGB_ERR_INJECT 0x1C10 +#define PHB_REGB_ERR_INF_ENABLE 0x1C20 +#define PHB_REGB_ERR_ERC_ENABLE 0x1C28 +#define PHB_REGB_ERR_FAT_ENABLE 0x1C30 +#define PHB_REGB_ERR_LOG_0 0x1C40 +#define PHB_REGB_ERR_LOG_1 0x1C48 +#define PHB_REGB_ERR_STATUS_MASK 0x1C50 +#define PHB_REGB_ERR1_STATUS_MASK 0x1C58 + +/* + * IODA3 on-chip tables + */ + +#define IODA3_TBL_LIST 1 +#define IODA3_TBL_MIST 2 +#define IODA3_TBL_RCAM 5 +#define IODA3_TBL_MRT 6 +#define IODA3_TBL_PESTA 7 +#define IODA3_TBL_PESTB 8 +#define IODA3_TBL_TVT 9 +#define IODA3_TBL_TCR 10 +#define IODA3_TBL_TDR 11 +#define IODA3_TBL_MBT 16 +#define IODA3_TBL_MDT 17 +#define IODA3_TBL_PEEV 20 + +/* LIST */ +#define IODA3_LIST_P PPC_BIT(6) +#define IODA3_LIST_Q PPC_BIT(7) +#define IODA3_LIST_STATE PPC_BIT(14) + +/* MIST */ +#define IODA3_MIST_P3 PPC_BIT(48 + 0) +#define IODA3_MIST_Q3 PPC_BIT(48 + 1) +#define IODA3_MIST_PE3 PPC_BITMASK(48 + 4, 48 + 15) + +/* TVT */ +#define IODA3_TVT_TABLE_ADDR PPC_BITMASK(0, 47) +#define IODA3_TVT_NUM_LEVELS PPC_BITMASK(48, 50) +#define IODA3_TVE_1_LEVEL 0 +#define IODA3_TVE_2_LEVELS 1 +#define IODA3_TVE_3_LEVELS 2 +#define IODA3_TVE_4_LEVELS 3 +#define IODA3_TVE_5_LEVELS 4 +#define IODA3_TVT_TCE_TABLE_SIZE PPC_BITMASK(51, 55) +#define IODA3_TVT_NON_TRANSLATE_50 PPC_BIT(56) +#define IODA3_TVT_IO_PSIZE PPC_BITMASK(59, 63) + +/* PESTA */ +#define IODA3_PESTA_MMIO_FROZEN PPC_BIT(0) +#define IODA3_PESTA_TRANS_TYPE PPC_BITMASK(5, 7) +#define IODA3_PESTA_TRANS_TYPE_MMIOLOAD 0x4 +#define IODA3_PESTA_CA_CMPLT_TMT PPC_BIT(8) +#define IODA3_PESTA_UR PPC_BIT(9) + +/* PESTB */ +#define IODA3_PESTB_DMA_STOPPED PPC_BIT(0) + +/* MDT */ +/* FIXME: check this field with Eric and add a B, C and D */ +#define IODA3_MDT_PE_A PPC_BITMASK(0, 15) +#define IODA3_MDT_PE_B PPC_BITMASK(16, 31) +#define IODA3_MDT_PE_C PPC_BITMASK(32, 47) +#define IODA3_MDT_PE_D PPC_BITMASK(48, 63) + +/* MBT */ +#define IODA3_MBT0_ENABLE PPC_BIT(0) +#define IODA3_MBT0_TYPE PPC_BIT(1) +#define IODA3_MBT0_TYPE_M32 IODA3_MBT0_TYPE +#define IODA3_MBT0_TYPE_M64 0 +#define IODA3_MBT0_MODE PPC_BITMASK(2, 3) +#define IODA3_MBT0_MODE_PE_SEG 0 +#define IODA3_MBT0_MODE_MDT 1 +#define IODA3_MBT0_MODE_SINGLE_PE 2 +#define IODA3_MBT0_SEG_DIV PPC_BITMASK(4, 5) +#define IODA3_MBT0_SEG_DIV_MAX 0 +#define IODA3_MBT0_SEG_DIV_128 1 +#define IODA3_MBT0_SEG_DIV_64 2 +#define IODA3_MBT0_SEG_DIV_8 3 +#define IODA3_MBT0_MDT_COLUMN PPC_BITMASK(4, 5) +#define IODA3_MBT0_BASE_ADDR PPC_BITMASK(8, 51) + +#define IODA3_MBT1_ENABLE PPC_BIT(0) +#define IODA3_MBT1_MASK PPC_BITMASK(8, 51) +#define IODA3_MBT1_SEG_BASE PPC_BITMASK(55, 63) +#define IODA3_MBT1_SINGLE_PE_NUM PPC_BITMASK(55, 63) + +/* + * IODA3 in-memory tables + */ + +/* + * PEST + * + * 2x8 bytes entries, PEST0 and PEST1 + */ + +#define IODA3_PEST0_MMIO_CAUSE PPC_BIT(2) +#define IODA3_PEST0_CFG_READ PPC_BIT(3) +#define IODA3_PEST0_CFG_WRITE PPC_BIT(4) +#define IODA3_PEST0_TTYPE PPC_BITMASK(5, 7) +#define PEST_TTYPE_DMA_WRITE 0 +#define PEST_TTYPE_MSI 1 +#define PEST_TTYPE_DMA_READ 2 +#define PEST_TTYPE_DMA_READ_RESP 3 +#define PEST_TTYPE_MMIO_LOAD 4 +#define PEST_TTYPE_MMIO_STORE 5 +#define PEST_TTYPE_OTHER 7 +#define IODA3_PEST0_CA_RETURN PPC_BIT(8) +#define IODA3_PEST0_UR_RETURN PPC_BIT(9) +#define IODA3_PEST0_PCIE_NONFATAL PPC_BIT(10) +#define IODA3_PEST0_PCIE_FATAL PPC_BIT(11) +#define IODA3_PEST0_PARITY_UE PPC_BIT(13) +#define IODA3_PEST0_PCIE_CORRECTABLE PPC_BIT(14) +#define IODA3_PEST0_PCIE_INTERRUPT PPC_BIT(15) +#define IODA3_PEST0_MMIO_XLATE PPC_BIT(16) +#define IODA3_PEST0_IODA3_ERROR PPC_BIT(16) /* Same bit as MMIO xlate */ +#define IODA3_PEST0_TCE_PAGE_FAULT PPC_BIT(18) +#define IODA3_PEST0_TCE_ACCESS_FAULT PPC_BIT(19) +#define IODA3_PEST0_DMA_RESP_TIMEOUT PPC_BIT(20) +#define IODA3_PEST0_AIB_SIZE_INVALID PPC_BIT(21) +#define IODA3_PEST0_LEM_BIT PPC_BITMASK(26, 31) +#define IODA3_PEST0_RID PPC_BITMASK(32, 47) +#define IODA3_PEST0_MSI_DATA PPC_BITMASK(48, 63) + +#define IODA3_PEST1_FAIL_ADDR PPC_BITMASK(3, 63) + + +#endif /* PCI_HOST_PNV_PHB4_REGS_H */ -- cgit v1.1