From 8ccad811e6c138102072d6ad10fea384538755f2 Mon Sep 17 00:00:00 2001 From: bellard Date: Mon, 7 Aug 2006 21:36:34 +0000 Subject: use AIO for DMA transfers - enabled DMA for CDROMs git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2103 c046a42c-6fe2-441c-8c8c-71466251a162 --- hw/ide.c | 435 ++++++++++++++++++++++++++++++++++----------------------------- 1 file changed, 236 insertions(+), 199 deletions(-) (limited to 'hw') diff --git a/hw/ide.c b/hw/ide.c index debbc0f..40e7b42 100644 --- a/hw/ide.c +++ b/hw/ide.c @@ -26,6 +26,8 @@ /* debug IDE devices */ //#define DEBUG_IDE //#define DEBUG_IDE_ATAPI +//#define DEBUG_AIO +#define USE_DMA_CDROM /* Bits of HD_STATUS */ #define ERR_STAT 0x01 @@ -368,19 +370,20 @@ typedef struct IDEState { #define UDIDETCR0 0x73 #define UDIDETCR1 0x7B -typedef int IDEDMAFunc(IDEState *s, - target_phys_addr_t phys_addr, - int transfer_size1); - typedef struct BMDMAState { uint8_t cmd; uint8_t status; uint32_t addr; - + struct PCIIDEState *pci_dev; /* current transfer state */ + uint32_t cur_addr; + uint32_t cur_prd_last; + uint32_t cur_prd_addr; + uint32_t cur_prd_len; IDEState *ide_if; - IDEDMAFunc *dma_cb; + BlockDriverCompletionFunc *dma_cb; + BlockDriverAIOCB *aiocb; } BMDMAState; typedef struct PCIIDEState { @@ -390,7 +393,7 @@ typedef struct PCIIDEState { int type; /* see IDE_TYPE_xxx */ } PCIIDEState; -static void ide_dma_start(IDEState *s, IDEDMAFunc *dma_cb); +static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb); static void padstr(char *str, const char *src, int len) { @@ -513,10 +516,17 @@ static void ide_atapi_identify(IDEState *s) padstr((uint8_t *)(p + 23), QEMU_VERSION, 8); /* firmware version */ padstr((uint8_t *)(p + 27), "QEMU CD-ROM", 40); /* model */ put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */ +#ifdef USE_DMA_CDROM + put_le16(p + 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */ + put_le16(p + 53, 7); /* words 64-70, 54-58, 88 valid */ + put_le16(p + 63, 7); /* mdma0-2 supported */ + put_le16(p + 64, 0x3f); /* PIO modes supported */ +#else put_le16(p + 49, 1 << 9); /* LBA supported, no DMA */ put_le16(p + 53, 3); /* words 64-70, 54-58 valid */ put_le16(p + 63, 0x103); /* DMA modes XXX: may be incorrect */ put_le16(p + 64, 1); /* PIO modes */ +#endif put_le16(p + 65, 0xb4); /* minimum DMA multiword tx cycle time */ put_le16(p + 66, 0xb4); /* recommended DMA multiword tx cycle time */ put_le16(p + 67, 0x12c); /* minimum PIO cycle time without flow control */ @@ -526,7 +536,9 @@ static void ide_atapi_identify(IDEState *s) put_le16(p + 72, 30); /* in ns */ put_le16(p + 80, 0x1e); /* support up to ATA/ATAPI-4 */ - +#ifdef USE_DMA_CDROM + put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ +#endif memcpy(s->identify_data, p, sizeof(s->identify_data)); s->identify_set = 1; } @@ -659,54 +671,101 @@ static void ide_sector_read(IDEState *s) } } -static int ide_read_dma_cb(IDEState *s, - target_phys_addr_t phys_addr, - int transfer_size1) +/* return 0 if buffer completed */ +static int dma_buf_rw(BMDMAState *bm, int is_write) { - int len, transfer_size, n; - int64_t sector_num; + IDEState *s = bm->ide_if; + struct { + uint32_t addr; + uint32_t size; + } prd; + int l, len; - transfer_size = transfer_size1; - while (transfer_size > 0) { - len = s->io_buffer_size - s->io_buffer_index; - if (len <= 0) { - /* transfert next data */ - n = s->nsector; - if (n == 0) - break; - if (n > MAX_MULT_SECTORS) - n = MAX_MULT_SECTORS; - sector_num = ide_get_sector(s); - bdrv_read(s->bs, sector_num, s->io_buffer, n); - s->io_buffer_index = 0; - s->io_buffer_size = n * 512; - len = s->io_buffer_size; - sector_num += n; - ide_set_sector(s, sector_num); - s->nsector -= n; + for(;;) { + l = s->io_buffer_size - s->io_buffer_index; + if (l <= 0) + break; + if (bm->cur_prd_len == 0) { + /* end of table (with a fail safe of one page) */ + if (bm->cur_prd_last || + (bm->cur_addr - bm->addr) >= 4096) + return 0; + cpu_physical_memory_read(bm->cur_addr, (uint8_t *)&prd, 8); + bm->cur_addr += 8; + prd.addr = le32_to_cpu(prd.addr); + prd.size = le32_to_cpu(prd.size); + len = prd.size & 0xfffe; + if (len == 0) + len = 0x10000; + bm->cur_prd_len = len; + bm->cur_prd_addr = prd.addr; + bm->cur_prd_last = (prd.size & 0x80000000); + } + if (l > bm->cur_prd_len) + l = bm->cur_prd_len; + if (l > 0) { + if (is_write) { + cpu_physical_memory_write(bm->cur_prd_addr, + s->io_buffer + s->io_buffer_index, l); + } else { + cpu_physical_memory_read(bm->cur_prd_addr, + s->io_buffer + s->io_buffer_index, l); + } + bm->cur_prd_addr += l; + bm->cur_prd_len -= l; + s->io_buffer_index += l; } - if (len > transfer_size) - len = transfer_size; - cpu_physical_memory_write(phys_addr, - s->io_buffer + s->io_buffer_index, len); - s->io_buffer_index += len; - transfer_size -= len; - phys_addr += len; } - if (s->io_buffer_index >= s->io_buffer_size && s->nsector == 0) { + return 1; +} + +/* XXX: handle errors */ +static void ide_read_dma_cb(void *opaque, int ret) +{ + BMDMAState *bm = opaque; + IDEState *s = bm->ide_if; + int n; + int64_t sector_num; + + n = s->io_buffer_size >> 9; + sector_num = ide_get_sector(s); + if (n > 0) { + sector_num += n; + ide_set_sector(s, sector_num); + s->nsector -= n; + if (dma_buf_rw(bm, 1) == 0) + goto eot; + } + + /* end of transfer ? */ + if (s->nsector == 0) { s->status = READY_STAT | SEEK_STAT; ide_set_irq(s); -#ifdef DEBUG_IDE_ATAPI - printf("dma status=0x%x\n", s->status); -#endif - return 0; + eot: + bm->status &= ~BM_STATUS_DMAING; + bm->status |= BM_STATUS_INT; + bm->dma_cb = NULL; + bm->ide_if = NULL; + bm->aiocb = NULL; + return; } - return transfer_size1 - transfer_size; + + /* launch next transfer */ + n = s->nsector; + if (n > MAX_MULT_SECTORS) + n = MAX_MULT_SECTORS; + s->io_buffer_index = 0; + s->io_buffer_size = n * 512; +#ifdef DEBUG_AIO + printf("aio_read: sector_num=%lld n=%d\n", sector_num, n); +#endif + bm->aiocb = bdrv_aio_read(s->bs, sector_num, s->io_buffer, n, + ide_read_dma_cb, bm); } static void ide_sector_read_dma(IDEState *s) { - s->status = READY_STAT | SEEK_STAT | DRQ_STAT; + s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; s->io_buffer_index = 0; s->io_buffer_size = 0; ide_dma_start(s, ide_read_dma_cb); @@ -761,71 +820,56 @@ static void ide_sector_write(IDEState *s) } } -static int ide_write_dma_cb(IDEState *s, - target_phys_addr_t phys_addr, - int transfer_size1) +/* XXX: handle errors */ +static void ide_write_dma_cb(void *opaque, int ret) { - int len, transfer_size, n; + BMDMAState *bm = opaque; + IDEState *s = bm->ide_if; + int n; int64_t sector_num; - transfer_size = transfer_size1; - for(;;) { - len = s->io_buffer_size - s->io_buffer_index; - if (len == 0) { - n = s->io_buffer_size >> 9; - sector_num = ide_get_sector(s); - bdrv_write(s->bs, sector_num, s->io_buffer, - s->io_buffer_size >> 9); - sector_num += n; - ide_set_sector(s, sector_num); - s->nsector -= n; - n = s->nsector; - if (n == 0) { - /* end of transfer */ - s->status = READY_STAT | SEEK_STAT; -#ifdef TARGET_I386 - if (win2k_install_hack && ((++s->irq_count % 16) == 0)) { - /* It seems there is a bug in the Windows 2000 installer - HDD IDE driver which fills the disk with empty logs - when the IDE write IRQ comes too early. This hack tries - to correct that at the expense of slower write - performances. Use this option _only_ to install Windows - 2000. You must disable it for normal use. */ - qemu_mod_timer(s->sector_write_timer, - qemu_get_clock(vm_clock) + (ticks_per_sec / 1000)); - } else -#endif - ide_set_irq(s); - return 0; - } - if (n > MAX_MULT_SECTORS) - n = MAX_MULT_SECTORS; - s->io_buffer_index = 0; - s->io_buffer_size = n * 512; - len = s->io_buffer_size; - } - if (transfer_size <= 0) - break; - if (len > transfer_size) - len = transfer_size; - cpu_physical_memory_read(phys_addr, - s->io_buffer + s->io_buffer_index, len); - s->io_buffer_index += len; - transfer_size -= len; - phys_addr += len; + n = s->io_buffer_size >> 9; + sector_num = ide_get_sector(s); + if (n > 0) { + sector_num += n; + ide_set_sector(s, sector_num); + s->nsector -= n; } - return transfer_size1 - transfer_size; -} -static void ide_sector_write_dma(IDEState *s) -{ - int n; - s->status = READY_STAT | SEEK_STAT | DRQ_STAT; + /* end of transfer ? */ + if (s->nsector == 0) { + s->status = READY_STAT | SEEK_STAT; + ide_set_irq(s); + eot: + bm->status &= ~BM_STATUS_DMAING; + bm->status |= BM_STATUS_INT; + bm->dma_cb = NULL; + bm->ide_if = NULL; + bm->aiocb = NULL; + return; + } + + /* launch next transfer */ n = s->nsector; if (n > MAX_MULT_SECTORS) n = MAX_MULT_SECTORS; s->io_buffer_index = 0; s->io_buffer_size = n * 512; + + if (dma_buf_rw(bm, 0) == 0) + goto eot; +#ifdef DEBUG_AIO + printf("aio_write: sector_num=%lld n=%d\n", sector_num, n); +#endif + bm->aiocb = bdrv_aio_write(s->bs, sector_num, s->io_buffer, n, + ide_write_dma_cb, bm); +} + +static void ide_sector_write_dma(IDEState *s) +{ + s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; + s->io_buffer_index = 0; + s->io_buffer_size = 0; ide_dma_start(s, ide_write_dma_cb); } @@ -882,6 +926,23 @@ static void lba_to_msf(uint8_t *buf, int lba) buf[2] = lba % 75; } +static void cd_data_to_raw(uint8_t *buf, int lba) +{ + /* sync bytes */ + buf[0] = 0x00; + memset(buf + 1, 0xff, 10); + buf[11] = 0x00; + buf += 12; + /* MSF */ + lba_to_msf(buf, lba); + buf[3] = 0x01; /* mode 1 data */ + buf += 4; + /* data */ + buf += 2048; + /* XXX: ECC not computed */ + memset(buf, 0, 288); +} + static void cd_read_sector(BlockDriverState *bs, int lba, uint8_t *buf, int sector_size) { @@ -890,20 +951,8 @@ static void cd_read_sector(BlockDriverState *bs, int lba, uint8_t *buf, bdrv_read(bs, (int64_t)lba << 2, buf, 4); break; case 2352: - /* sync bytes */ - buf[0] = 0x00; - memset(buf + 1, 0xff, 10); - buf[11] = 0x00; - buf += 12; - /* MSF */ - lba_to_msf(buf, lba); - buf[3] = 0x01; /* mode 1 data */ - buf += 4; - /* data */ - bdrv_read(bs, (int64_t)lba << 2, buf, 4); - buf += 2048; - /* ECC */ - memset(buf, 0, 288); + bdrv_read(bs, (int64_t)lba << 2, buf + 16, 4); + cd_data_to_raw(buf, lba); break; default: break; @@ -1013,46 +1062,58 @@ static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, } /* ATAPI DMA support */ -static int ide_atapi_cmd_read_dma_cb(IDEState *s, - target_phys_addr_t phys_addr, - int transfer_size1) + +/* XXX: handle read errors */ +static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret) { - int len, transfer_size; - - transfer_size = transfer_size1; - while (transfer_size > 0) { -#ifdef DEBUG_IDE_ATAPI - printf("transfer_size: %d phys_addr=%08x\n", transfer_size, phys_addr); -#endif - if (s->packet_transfer_size <= 0) - break; - len = s->cd_sector_size - s->io_buffer_index; - if (len <= 0) { - /* transfert next data */ - cd_read_sector(s->bs, s->lba, s->io_buffer, s->cd_sector_size); - s->lba++; - s->io_buffer_index = 0; - len = s->cd_sector_size; + BMDMAState *bm = opaque; + IDEState *s = bm->ide_if; + int data_offset, n; + + if (s->io_buffer_size > 0) { + if (s->cd_sector_size == 2352) { + n = 1; + cd_data_to_raw(s->io_buffer, s->lba); + } else { + n = s->io_buffer_size >> 11; } - if (len > transfer_size) - len = transfer_size; - cpu_physical_memory_write(phys_addr, - s->io_buffer + s->io_buffer_index, len); - s->packet_transfer_size -= len; - s->io_buffer_index += len; - transfer_size -= len; - phys_addr += len; + s->packet_transfer_size -= s->io_buffer_size; + s->lba += n; + if (dma_buf_rw(bm, 1) == 0) + goto eot; } + if (s->packet_transfer_size <= 0) { s->status = READY_STAT; s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; ide_set_irq(s); -#ifdef DEBUG_IDE_ATAPI - printf("dma status=0x%x\n", s->status); -#endif - return 0; + eot: + bm->status &= ~BM_STATUS_DMAING; + bm->status |= BM_STATUS_INT; + bm->dma_cb = NULL; + bm->ide_if = NULL; + bm->aiocb = NULL; + return; + } + + s->io_buffer_index = 0; + if (s->cd_sector_size == 2352) { + n = 1; + s->io_buffer_size = s->cd_sector_size; + data_offset = 16; + } else { + n = s->packet_transfer_size >> 11; + if (n > (MAX_MULT_SECTORS / 4)) + n = (MAX_MULT_SECTORS / 4); + s->io_buffer_size = n * 2048; + data_offset = 0; } - return transfer_size1 - transfer_size; +#ifdef DEBUG_AIO + printf("aio_read_cd: lba=%u n=%d\n", s->lba, n); +#endif + bm->aiocb = bdrv_aio_read(s->bs, (int64_t)s->lba << 2, + s->io_buffer + data_offset, n * 4, + ide_atapi_cmd_read_dma_cb, bm); } /* start a CD-CDROM read command with DMA */ @@ -1062,10 +1123,12 @@ static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors, { s->lba = lba; s->packet_transfer_size = nb_sectors * sector_size; - s->io_buffer_index = sector_size; + s->io_buffer_index = 0; + s->io_buffer_size = 0; s->cd_sector_size = sector_size; - s->status = READY_STAT | DRQ_STAT; + /* XXX: check if BUSY_STAT should be set */ + s->status = READY_STAT | DRQ_STAT | BUSY_STAT; ide_dma_start(s, ide_atapi_cmd_read_dma_cb); } @@ -2103,59 +2166,19 @@ static void ide_map(PCIDevice *pci_dev, int region_num, } } -/* XXX: full callback usage to prepare non blocking I/Os support - - error handling */ -static void ide_dma_loop(BMDMAState *bm) -{ - struct { - uint32_t addr; - uint32_t size; - } prd; - target_phys_addr_t cur_addr; - int len, i, len1; - - cur_addr = bm->addr; - /* at most one page to avoid hanging if erroneous parameters */ - for(i = 0; i < 512; i++) { - cpu_physical_memory_read(cur_addr, (uint8_t *)&prd, 8); - prd.addr = le32_to_cpu(prd.addr); - prd.size = le32_to_cpu(prd.size); -#ifdef DEBUG_IDE - printf("ide: dma: prd: %08x: addr=0x%08x size=0x%08x\n", - (int)cur_addr, prd.addr, prd.size); -#endif - len = prd.size & 0xfffe; - if (len == 0) - len = 0x10000; - while (len > 0) { - len1 = bm->dma_cb(bm->ide_if, prd.addr, len); - if (len1 == 0) - goto the_end; - prd.addr += len1; - len -= len1; - } - /* end of transfer */ - if (prd.size & 0x80000000) - break; - cur_addr += 8; - } - /* end of transfer */ - the_end: - bm->status &= ~BM_STATUS_DMAING; - bm->status |= BM_STATUS_INT; - bm->dma_cb = NULL; - bm->ide_if = NULL; -} - -static void ide_dma_start(IDEState *s, IDEDMAFunc *dma_cb) +static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb) { BMDMAState *bm = s->bmdma; if(!bm) return; bm->ide_if = s; bm->dma_cb = dma_cb; + bm->cur_addr = bm->addr; + bm->cur_prd_last = 0; + bm->cur_prd_addr = 0; + bm->cur_prd_len = 0; if (bm->status & BM_STATUS_DMAING) { - ide_dma_loop(bm); + bm->dma_cb(bm, 0); } } @@ -2167,14 +2190,28 @@ static void bmdma_cmd_writeb(void *opaque, uint32_t addr, uint32_t val) #endif if (!(val & BM_CMD_START)) { /* XXX: do it better */ - bm->status &= ~BM_STATUS_DMAING; + if (bm->status & BM_STATUS_DMAING) { + bm->status &= ~BM_STATUS_DMAING; + /* cancel DMA request */ + bm->ide_if = NULL; + bm->dma_cb = NULL; + if (bm->aiocb) { +#ifdef DEBUG_AIO + printf("aio_cancel\n"); +#endif + bdrv_aio_cancel(bm->aiocb); + bm->aiocb = NULL; + } + } bm->cmd = val & 0x09; } else { - bm->status |= BM_STATUS_DMAING; + if (!(bm->status & BM_STATUS_DMAING)) { + bm->status |= BM_STATUS_DMAING; + /* start dma transfer if possible */ + if (bm->dma_cb) + bm->dma_cb(bm, 0); + } bm->cmd = val & 0x09; - /* start dma transfer if possible */ - if (bm->dma_cb) - ide_dma_loop(bm); } } -- cgit v1.1