From 6361bbc7e21f822823e015e5ccb50d4ac1745b1b Mon Sep 17 00:00:00 2001 From: Ladi Prosek Date: Mon, 22 May 2017 14:33:25 +0200 Subject: usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up PORT_STAT_C_SUSPEND should be set even on host-initiated wake-up, i.e. on ClearPortFeature(PORT_SUSPEND). Windows is known to not work properly otherwise. Side note, since PORT_ENABLE looks similar and might appear to have the same issue: According to 11.24.2.7.2.2 C_PORT_ENABLE: "This bit is set when the PORT_ENABLE bit changes from one to zero as a result of a Port Error condition (see Section 11.8.1). This bit is not set on any other changes to PORT_ENABLE." Signed-off-by: Ladi Prosek Message-id: 20170522123325.2199-1-lprosek@redhat.com Signed-off-by: Gerd Hoffmann --- hw/usb/dev-hub.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'hw/usb/dev-hub.c') diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index 47b7519..e82a6a6 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -402,7 +402,20 @@ static void usb_hub_handle_control(USBDevice *dev, USBPacket *p, port->wPortChange &= ~PORT_STAT_C_ENABLE; break; case PORT_SUSPEND: - port->wPortStatus &= ~PORT_STAT_SUSPEND; + if (port->wPortStatus & PORT_STAT_SUSPEND) { + port->wPortStatus &= ~PORT_STAT_SUSPEND; + + /* + * USB Spec rev2.0 11.24.2.7.2.3 C_PORT_SUSPEND + * "This bit is set on the following transitions: + * - On transition from the Resuming state to the + * SendEOP [sic] state" + * + * Note that this includes both remote wake-up and + * explicit ClearPortFeature(PORT_SUSPEND). + */ + port->wPortChange |= PORT_STAT_C_SUSPEND; + } break; case PORT_C_SUSPEND: port->wPortChange &= ~PORT_STAT_C_SUSPEND; -- cgit v1.1