From 2e5d83bbef5a539f22970c2bccd19b125d82aab0 Mon Sep 17 00:00:00 2001 From: pbrook Date: Thu, 25 May 2006 23:58:51 +0000 Subject: Rearrange SCSI disk emulation code. Add USB mass storage device emulation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1940 c046a42c-6fe2-441c-8c8c-71466251a162 --- hw/usb-msd.c | 395 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 395 insertions(+) create mode 100644 hw/usb-msd.c (limited to 'hw/usb-msd.c') diff --git a/hw/usb-msd.c b/hw/usb-msd.c new file mode 100644 index 0000000..6b4cb81 --- /dev/null +++ b/hw/usb-msd.c @@ -0,0 +1,395 @@ +/* + * USB Mass Storage Device emulation + * + * Copyright (c) 2006 CodeSourcery. + * Written by Paul Brook + * + * This code is licenced under the LGPL. + */ + +#include "vl.h" + +//#define DEBUG_MSD + +#ifdef DEBUG_MSD +#define DPRINTF(fmt, args...) \ +do { printf("usb-msd: " fmt , ##args); } while (0) +#else +#define DPRINTF(fmt, args...) do {} while(0) +#endif + +/* USB requests. */ +#define MassStorageReset 0xff +#define GetMaxLun 0xfe + +enum USBMSDMode { + USB_MSDM_CBW, /* Command Block. */ + USB_MSDM_DATAOUT, /* Tranfer data to device. */ + USB_MSDM_DATAIN, /* Transfer data from device. */ + USB_MSDM_CSW /* Command Status. */ +}; + +typedef struct { + USBDevice dev; + enum USBMSDMode mode; + uint32_t data_len; + uint32_t tag; + SCSIDevice *scsi_dev; + int result; +} MSDState; + +static const uint8_t qemu_msd_dev_descriptor[] = { + 0x12, /* u8 bLength; */ + 0x01, /* u8 bDescriptorType; Device */ + 0x10, 0x00, /* u16 bcdUSB; v1.0 */ + + 0x00, /* u8 bDeviceClass; */ + 0x00, /* u8 bDeviceSubClass; */ + 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */ + 0x08, /* u8 bMaxPacketSize0; 8 Bytes */ + + /* Vendor and product id are arbitrary. */ + 0x00, 0x00, /* u16 idVendor; */ + 0x00, 0x00, /* u16 idProduct; */ + 0x00, 0x00, /* u16 bcdDevice */ + + 0x01, /* u8 iManufacturer; */ + 0x02, /* u8 iProduct; */ + 0x03, /* u8 iSerialNumber; */ + 0x01 /* u8 bNumConfigurations; */ +}; + +static const uint8_t qemu_msd_config_descriptor[] = { + + /* one configuration */ + 0x09, /* u8 bLength; */ + 0x02, /* u8 bDescriptorType; Configuration */ + 0x20, 0x00, /* u16 wTotalLength; */ + 0x01, /* u8 bNumInterfaces; (1) */ + 0x01, /* u8 bConfigurationValue; */ + 0x00, /* u8 iConfiguration; */ + 0xc0, /* u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 0x00, /* u8 MaxPower; */ + + /* one interface */ + 0x09, /* u8 if_bLength; */ + 0x04, /* u8 if_bDescriptorType; Interface */ + 0x00, /* u8 if_bInterfaceNumber; */ + 0x00, /* u8 if_bAlternateSetting; */ + 0x02, /* u8 if_bNumEndpoints; */ + 0x08, /* u8 if_bInterfaceClass; MASS STORAGE */ + 0x06, /* u8 if_bInterfaceSubClass; SCSI */ + 0x50, /* u8 if_bInterfaceProtocol; Bulk Only */ + 0x00, /* u8 if_iInterface; */ + + /* Bulk-In endpoint */ + 0x07, /* u8 ep_bLength; */ + 0x05, /* u8 ep_bDescriptorType; Endpoint */ + 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x02, /* u8 ep_bmAttributes; Bulk */ + 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ + 0x00, /* u8 ep_bInterval; */ + + /* Bulk-Out endpoint */ + 0x07, /* u8 ep_bLength; */ + 0x05, /* u8 ep_bDescriptorType; Endpoint */ + 0x02, /* u8 ep_bEndpointAddress; OUT Endpoint 2 */ + 0x02, /* u8 ep_bmAttributes; Bulk */ + 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ + 0x00 /* u8 ep_bInterval; */ +}; + +static void usb_msd_command_complete(void *opaque, uint32_t tag, int fail) +{ + MSDState *s = (MSDState *)opaque; + + DPRINTF("Command complete\n"); + s->result = fail; + s->mode = USB_MSDM_CSW; +} + +static void usb_msd_handle_reset(USBDevice *dev, int destroy) +{ + MSDState *s = (MSDState *)dev; + + DPRINTF("Reset\n"); + s->mode = USB_MSDM_CBW; + if (destroy) { + scsi_disk_destroy(s->scsi_dev); + qemu_free(s); + } +} + +static int usb_msd_handle_control(USBDevice *dev, int request, int value, + int index, int length, uint8_t *data) +{ + MSDState *s = (MSDState *)dev; + int ret = 0; + + switch (request) { + case DeviceRequest | USB_REQ_GET_STATUS: + data[0] = (1 << USB_DEVICE_SELF_POWERED) | + (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP); + data[1] = 0x00; + ret = 2; + break; + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + if (value == USB_DEVICE_REMOTE_WAKEUP) { + dev->remote_wakeup = 0; + } else { + goto fail; + } + ret = 0; + break; + case DeviceOutRequest | USB_REQ_SET_FEATURE: + if (value == USB_DEVICE_REMOTE_WAKEUP) { + dev->remote_wakeup = 1; + } else { + goto fail; + } + ret = 0; + break; + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + dev->addr = value; + ret = 0; + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch(value >> 8) { + case USB_DT_DEVICE: + memcpy(data, qemu_msd_dev_descriptor, + sizeof(qemu_msd_dev_descriptor)); + ret = sizeof(qemu_msd_dev_descriptor); + break; + case USB_DT_CONFIG: + memcpy(data, qemu_msd_config_descriptor, + sizeof(qemu_msd_config_descriptor)); + ret = sizeof(qemu_msd_config_descriptor); + break; + case USB_DT_STRING: + switch(value & 0xff) { + case 0: + /* language ids */ + data[0] = 4; + data[1] = 3; + data[2] = 0x09; + data[3] = 0x04; + ret = 4; + break; + case 1: + /* vendor description */ + ret = set_usb_string(data, "QEMU " QEMU_VERSION); + break; + case 2: + /* product description */ + ret = set_usb_string(data, "QEMU USB HARDDRIVE"); + break; + case 3: + /* serial number */ + ret = set_usb_string(data, "1"); + break; + default: + goto fail; + } + break; + default: + goto fail; + } + break; + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + data[0] = 1; + ret = 1; + break; + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + ret = 0; + break; + case DeviceRequest | USB_REQ_GET_INTERFACE: + data[0] = 0; + ret = 1; + break; + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + ret = 0; + break; + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + if (value == 0 && index != 0x81) { /* clear ep halt */ + goto fail; + } + ret = 0; + break; + /* Class specific requests. */ + case MassStorageReset: + /* Reset state ready for the next CBW. */ + s->mode = USB_MSDM_CBW; + ret = 0; + break; + case GetMaxLun: + data[0] = 0; + ret = 1; + break; + default: + fail: + ret = USB_RET_STALL; + break; + } + return ret; +} + +struct usb_msd_cbw { + uint32_t sig; + uint32_t tag; + uint32_t data_len; + uint8_t flags; + uint8_t lun; + uint8_t cmd_len; + uint8_t cmd[16]; +}; + +struct usb_msd_csw { + uint32_t sig; + uint32_t tag; + uint32_t residue; + uint8_t status; +}; + +static int usb_msd_handle_data(USBDevice *dev, int pid, uint8_t devep, + uint8_t *data, int len) +{ + MSDState *s = (MSDState *)dev; + int ret = 0; + struct usb_msd_cbw cbw; + struct usb_msd_csw csw; + + switch (pid) { + case USB_TOKEN_OUT: + if (devep != 2) + goto fail; + + switch (s->mode) { + case USB_MSDM_CBW: + if (len != 31) { + fprintf(stderr, "usb-msd: Bad CBW size"); + goto fail; + } + memcpy(&cbw, data, 31); + if (le32_to_cpu(cbw.sig) != 0x43425355) { + fprintf(stderr, "usb-msd: Bad signature %08x\n", + le32_to_cpu(cbw.sig)); + goto fail; + } + DPRINTF("Command on LUN %d\n", cbw.lun); + if (cbw.lun != 0) { + fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun); + goto fail; + } + s->tag = le32_to_cpu(cbw.tag); + s->data_len = le32_to_cpu(cbw.data_len); + if (s->data_len == 0) { + s->mode = USB_MSDM_CSW; + } else if (cbw.flags & 0x80) { + s->mode = USB_MSDM_DATAIN; + } else { + s->mode = USB_MSDM_DATAOUT; + } + DPRINTF("Command tag 0x%x flags %08x len %d data %d\n", + s->tag, cbw.flags, cbw.cmd_len, s->data_len); + scsi_send_command(s->scsi_dev, s->tag, cbw.cmd); + ret = len; + break; + + case USB_MSDM_DATAOUT: + DPRINTF("Data out %d/%d\n", len, s->data_len); + if (len > s->data_len) + goto fail; + + if (scsi_write_data(s->scsi_dev, data, len)) + goto fail; + + s->data_len -= len; + if (s->data_len == 0) + s->mode = USB_MSDM_CSW; + ret = len; + break; + + default: + DPRINTF("Unexpected write (len %d)\n", len); + goto fail; + } + break; + + case USB_TOKEN_IN: + if (devep != 1) + goto fail; + + switch (s->mode) { + case USB_MSDM_CSW: + DPRINTF("Command status %d tag 0x%x, len %d\n", + s->result, s->tag, len); + if (len < 13) + goto fail; + + csw.sig = cpu_to_le32(0x53425355); + csw.tag = cpu_to_le32(s->tag); + csw.residue = 0; + csw.status = s->result; + memcpy(data, &csw, 13); + ret = 13; + s->mode = USB_MSDM_CBW; + break; + + case USB_MSDM_DATAIN: + DPRINTF("Data in %d/%d\n", len, s->data_len); + if (len > s->data_len) + len = s->data_len; + + if (scsi_read_data(s->scsi_dev, data, len)) + goto fail; + + s->data_len -= len; + if (s->data_len == 0) + s->mode = USB_MSDM_CSW; + ret = len; + break; + + default: + DPRINTF("Unexpected read (len %d)\n", len); + goto fail; + } + break; + + default: + DPRINTF("Bad token\n"); + fail: + ret = USB_RET_STALL; + break; + } + + return ret; +} + + +USBDevice *usb_msd_init(const char *filename) +{ + MSDState *s; + BlockDriverState *bdrv; + + s = qemu_mallocz(sizeof(MSDState)); + if (!s) + return NULL; + + bdrv = bdrv_new("usb"); + bdrv_open(bdrv, filename, 0); + + s->dev.speed = USB_SPEED_FULL; + s->dev.handle_packet = usb_generic_handle_packet; + + s->dev.handle_reset = usb_msd_handle_reset; + s->dev.handle_control = usb_msd_handle_control; + s->dev.handle_data = usb_msd_handle_data; + + s->scsi_dev = scsi_disk_init(bdrv, usb_msd_command_complete, s); + usb_msd_handle_reset((USBDevice *)s, 0); + return (USBDevice *)s; +} -- cgit v1.1