From 2ac88848cb03605e2fae6a035650eea461218af2 Mon Sep 17 00:00:00 2001 From: Havard Skinnemoen Date: Fri, 23 Oct 2020 14:06:33 -0700 Subject: Move npcm7xx_timer_reached_zero call out of npcm7xx_timer_pause MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This allows us to reuse npcm7xx_timer_pause for the watchdog timer. Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Havard Skinnemoen Signed-off-by: Peter Maydell --- hw/timer/npcm7xx_timer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'hw/timer') diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index 5703e43..2df9e3e 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -157,9 +157,6 @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) timer_del(&t->qtimer); now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); t->remaining_ns = t->expires_ns - now; - if (t->remaining_ns <= 0) { - npcm7xx_timer_reached_zero(t); - } } /* @@ -239,6 +236,9 @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; npcm7xx_timer_pause(t); + if (t->remaining_ns <= 0) { + npcm7xx_timer_reached_zero(t); + } } } } -- cgit v1.1 From 7d378ed6e3b4a26f4da887fcccc4c6f1db3dcd42 Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Fri, 23 Oct 2020 14:06:34 -0700 Subject: hw/timer: Adding watchdog for NPCM7XX Timer. The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting Signed-off-by: Hao Wu Signed-off-by: Havard Skinnemoen Reviewed-by: Peter Maydell [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell --- hw/timer/npcm7xx_timer.c | 266 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 220 insertions(+), 46 deletions(-) (limited to 'hw/timer') diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index 2df9e3e..d24445b 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -17,6 +17,7 @@ #include "qemu/osdep.h" #include "hw/irq.h" +#include "hw/qdev-properties.h" #include "hw/misc/npcm7xx_clk.h" #include "hw/timer/npcm7xx_timer.h" #include "migration/vmstate.h" @@ -60,6 +61,50 @@ enum NPCM7xxTimerRegisters { #define NPCM7XX_TCSR_PRESCALE_START 0 #define NPCM7XX_TCSR_PRESCALE_LEN 8 +#define NPCM7XX_WTCR_WTCLK(rv) extract32(rv, 10, 2) +#define NPCM7XX_WTCR_FREEZE_EN BIT(9) +#define NPCM7XX_WTCR_WTE BIT(7) +#define NPCM7XX_WTCR_WTIE BIT(6) +#define NPCM7XX_WTCR_WTIS(rv) extract32(rv, 4, 2) +#define NPCM7XX_WTCR_WTIF BIT(3) +#define NPCM7XX_WTCR_WTRF BIT(2) +#define NPCM7XX_WTCR_WTRE BIT(1) +#define NPCM7XX_WTCR_WTR BIT(0) + +/* + * The number of clock cycles between interrupt and reset in watchdog, used + * by the software to handle the interrupt before system is reset. + */ +#define NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES 1024 + +/* Start or resume the timer. */ +static void npcm7xx_timer_start(NPCM7xxBaseTimer *t) +{ + int64_t now; + + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->expires_ns = now + t->remaining_ns; + timer_mod(&t->qtimer, t->expires_ns); +} + +/* Stop counting. Record the time remaining so we can continue later. */ +static void npcm7xx_timer_pause(NPCM7xxBaseTimer *t) +{ + int64_t now; + + timer_del(&t->qtimer); + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + t->remaining_ns = t->expires_ns - now; +} + +/* Delete the timer and reset it to default state. */ +static void npcm7xx_timer_clear(NPCM7xxBaseTimer *t) +{ + timer_del(&t->qtimer); + t->expires_ns = 0; + t->remaining_ns = 0; +} + /* * Returns the index of timer in the tc->timer array. This can be used to * locate the registers that belong to this timer. @@ -102,6 +147,52 @@ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) return count; } +static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t) +{ + switch (NPCM7XX_WTCR_WTCLK(t->wtcr)) { + case 0: + return 1; + case 1: + return 256; + case 2: + return 2048; + case 3: + return 65536; + default: + g_assert_not_reached(); + } +} + +static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t, + int64_t cycles) +{ + uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t); + int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles; + + /* + * The reset function always clears the current timer. The caller of the + * this needs to decide whether to start the watchdog timer based on + * specific flag in WTCR. + */ + npcm7xx_timer_clear(&t->base_timer); + + ns *= prescaler; + t->base_timer.remaining_ns = ns; +} + +static void npcm7xx_watchdog_timer_reset(NPCM7xxWatchdogTimer *t) +{ + int64_t cycles = 1; + uint32_t s = NPCM7XX_WTCR_WTIS(t->wtcr); + + g_assert(s <= 3); + + cycles <<= NPCM7XX_WATCHDOG_BASETIME_SHIFT; + cycles <<= 2 * s; + + npcm7xx_watchdog_timer_reset_cycles(t, cycles); +} + /* * Raise the interrupt line if there's a pending interrupt and interrupts are * enabled for this timer. If not, lower it. @@ -116,16 +207,6 @@ static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t) trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending); } -/* Start or resume the timer. */ -static void npcm7xx_timer_start(NPCM7xxTimer *t) -{ - int64_t now; - - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->expires_ns = now + t->remaining_ns; - timer_mod(&t->qtimer, t->expires_ns); -} - /* * Called when the counter reaches zero. Sets the interrupt flag, and either * restarts or disables the timer. @@ -138,9 +219,9 @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) tc->tisr |= BIT(index); if (t->tcsr & NPCM7XX_TCSR_PERIODIC) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } else { t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT); @@ -149,15 +230,6 @@ static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t) npcm7xx_timer_check_interrupt(t); } -/* Stop counting. Record the time remaining so we can continue later. */ -static void npcm7xx_timer_pause(NPCM7xxTimer *t) -{ - int64_t now; - - timer_del(&t->qtimer); - now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - t->remaining_ns = t->expires_ns - now; -} /* * Restart the timer from its initial value. If the timer was enabled and stays @@ -167,10 +239,10 @@ static void npcm7xx_timer_pause(NPCM7xxTimer *t) */ static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr) { - t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -181,10 +253,10 @@ static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t) if (t->tcsr & NPCM7XX_TCSR_CEN) { int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return npcm7xx_timer_ns_to_count(t, t->expires_ns - now); + return npcm7xx_timer_ns_to_count(t, t->base_timer.expires_ns - now); } - return npcm7xx_timer_ns_to_count(t, t->remaining_ns); + return npcm7xx_timer_ns_to_count(t, t->base_timer.remaining_ns); } static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) @@ -216,9 +288,9 @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) { /* Recalculate time remaining based on the current TDR value. */ - t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); + t->base_timer.remaining_ns = npcm7xx_timer_count_to_ns(t, tdr); if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) { - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } } @@ -232,11 +304,11 @@ static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr) if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) { if (new_tcsr & NPCM7XX_TCSR_CEN) { t->tcsr |= NPCM7XX_TCSR_CACT; - npcm7xx_timer_start(t); + npcm7xx_timer_start(&t->base_timer); } else { t->tcsr &= ~NPCM7XX_TCSR_CACT; - npcm7xx_timer_pause(t); - if (t->remaining_ns <= 0) { + npcm7xx_timer_pause(&t->base_timer); + if (t->base_timer.remaining_ns <= 0) { npcm7xx_timer_reached_zero(t); } } @@ -259,9 +331,47 @@ static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value) if (value & (1U << i)) { npcm7xx_timer_check_interrupt(&s->timer[i]); } + } } +static void npcm7xx_timer_write_wtcr(NPCM7xxWatchdogTimer *t, uint32_t new_wtcr) +{ + uint32_t old_wtcr = t->wtcr; + + /* + * WTIF and WTRF are cleared by writing 1. Writing 0 makes these bits + * unchanged. + */ + if (new_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr &= ~NPCM7XX_WTCR_WTIF; + } else if (old_wtcr & NPCM7XX_WTCR_WTIF) { + new_wtcr |= NPCM7XX_WTCR_WTIF; + } + if (new_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr &= ~NPCM7XX_WTCR_WTRF; + } else if (old_wtcr & NPCM7XX_WTCR_WTRF) { + new_wtcr |= NPCM7XX_WTCR_WTRF; + } + + t->wtcr = new_wtcr; + + if (new_wtcr & NPCM7XX_WTCR_WTR) { + t->wtcr &= ~NPCM7XX_WTCR_WTR; + npcm7xx_watchdog_timer_reset(t); + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } + } else if ((old_wtcr ^ new_wtcr) & NPCM7XX_WTCR_WTE) { + if (new_wtcr & NPCM7XX_WTCR_WTE) { + npcm7xx_timer_start(&t->base_timer); + } else { + npcm7xx_timer_pause(&t->base_timer); + } + } + +} + static hwaddr npcm7xx_tcsr_index(hwaddr reg) { switch (reg) { @@ -353,7 +463,7 @@ static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size) break; case NPCM7XX_TIMER_WTCR: - value = s->wtcr; + value = s->watchdog_timer.wtcr; break; default: @@ -409,8 +519,7 @@ static void npcm7xx_timer_write(void *opaque, hwaddr offset, return; case NPCM7XX_TIMER_WTCR: - qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n", - __func__, value); + npcm7xx_timer_write_wtcr(&s->watchdog_timer, value); return; } @@ -448,15 +557,42 @@ static void npcm7xx_timer_enter_reset(Object *obj, ResetType type) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; - timer_del(&t->qtimer); - t->expires_ns = 0; - t->remaining_ns = 0; + npcm7xx_timer_clear(&t->base_timer); t->tcsr = 0x00000005; t->ticr = 0x00000000; } s->tisr = 0x00000000; - s->wtcr = 0x00000400; + /* + * Set WTCLK to 1(default) and reset all flags except WTRF. + * WTRF is not reset during a core domain reset. + */ + s->watchdog_timer.wtcr = 0x00000400 | (s->watchdog_timer.wtcr & + NPCM7XX_WTCR_WTRF); +} + +static void npcm7xx_watchdog_timer_expired(void *opaque) +{ + NPCM7xxWatchdogTimer *t = opaque; + + if (t->wtcr & NPCM7XX_WTCR_WTE) { + if (t->wtcr & NPCM7XX_WTCR_WTIF) { + if (t->wtcr & NPCM7XX_WTCR_WTRE) { + t->wtcr |= NPCM7XX_WTCR_WTRF; + /* send reset signal to CLK module*/ + qemu_irq_raise(t->reset_signal); + } + } else { + t->wtcr |= NPCM7XX_WTCR_WTIF; + if (t->wtcr & NPCM7XX_WTCR_WTIE) { + /* send interrupt */ + qemu_irq_raise(t->irq); + } + npcm7xx_watchdog_timer_reset_cycles(t, + NPCM7XX_WATCHDOG_INTERRUPT_TO_RESET_CYCLES); + npcm7xx_timer_start(&t->base_timer); + } + } } static void npcm7xx_timer_hold_reset(Object *obj) @@ -467,6 +603,7 @@ static void npcm7xx_timer_hold_reset(Object *obj) for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { qemu_irq_lower(s->timer[i].irq); } + qemu_irq_lower(s->watchdog_timer.irq); } static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) @@ -474,43 +611,80 @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp) NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev); SysBusDevice *sbd = &s->parent; int i; + NPCM7xxWatchdogTimer *w; for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) { NPCM7xxTimer *t = &s->timer[i]; t->ctrl = s; - timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t); + timer_init_ns(&t->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_timer_expired, t); sysbus_init_irq(sbd, &t->irq); } + w = &s->watchdog_timer; + w->ctrl = s; + timer_init_ns(&w->base_timer.qtimer, QEMU_CLOCK_VIRTUAL, + npcm7xx_watchdog_timer_expired, w); + sysbus_init_irq(sbd, &w->irq); + memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s, TYPE_NPCM7XX_TIMER, 4 * KiB); sysbus_init_mmio(sbd, &s->iomem); + qdev_init_gpio_out_named(dev, &w->reset_signal, + NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1); } -static const VMStateDescription vmstate_npcm7xx_timer = { - .name = "npcm7xx-timer", +static const VMStateDescription vmstate_npcm7xx_base_timer = { + .name = "npcm7xx-base-timer", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { - VMSTATE_TIMER(qtimer, NPCM7xxTimer), - VMSTATE_INT64(expires_ns, NPCM7xxTimer), - VMSTATE_INT64(remaining_ns, NPCM7xxTimer), + VMSTATE_TIMER(qtimer, NPCM7xxBaseTimer), + VMSTATE_INT64(expires_ns, NPCM7xxBaseTimer), + VMSTATE_INT64(remaining_ns, NPCM7xxBaseTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer = { + .name = "npcm7xx-timer", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), VMSTATE_UINT32(tcsr, NPCM7xxTimer), VMSTATE_UINT32(ticr, NPCM7xxTimer), VMSTATE_END_OF_LIST(), }, }; -static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { - .name = "npcm7xx-timer-ctrl", +static const VMStateDescription vmstate_npcm7xx_watchdog_timer = { + .name = "npcm7xx-watchdog-timer", .version_id = 0, .minimum_version_id = 0, .fields = (VMStateField[]) { + VMSTATE_STRUCT(base_timer, NPCM7xxWatchdogTimer, + 0, vmstate_npcm7xx_base_timer, + NPCM7xxBaseTimer), + VMSTATE_UINT32(wtcr, NPCM7xxWatchdogTimer), + VMSTATE_END_OF_LIST(), + }, +}; + +static const VMStateDescription vmstate_npcm7xx_timer_ctrl = { + .name = "npcm7xx-timer-ctrl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState), - VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState), VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState, NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer, NPCM7xxTimer), + VMSTATE_STRUCT(watchdog_timer, NPCM7xxTimerCtrlState, + 0, vmstate_npcm7xx_watchdog_timer, + NPCM7xxWatchdogTimer), VMSTATE_END_OF_LIST(), }, }; -- cgit v1.1 From 32bd322a0134ed89db00f2b9b3894982db3dedcb Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Thu, 15 Oct 2020 16:18:29 +0100 Subject: hw/timer/armv7m_systick: Rewrite to use ptimers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell Reviewed-by: Philippe Mathieu-Daudé Message-id: 20201015151829.14656-3-peter.maydell@linaro.org --- hw/timer/armv7m_systick.c | 124 +++++++++++++++++++--------------------------- 1 file changed, 52 insertions(+), 72 deletions(-) (limited to 'hw/timer') diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c index a8cec7e..2f19201 100644 --- a/hw/timer/armv7m_systick.c +++ b/hw/timer/armv7m_systick.c @@ -39,26 +39,6 @@ static inline int64_t systick_scale(SysTickState *s) } } -static void systick_reload(SysTickState *s, int reset) -{ - /* The Cortex-M3 Devices Generic User Guide says that "When the - * ENABLE bit is set to 1, the counter loads the RELOAD value from the - * SYST RVR register and then counts down". So, we need to check the - * ENABLE bit before reloading the value. - */ - trace_systick_reload(); - - if ((s->control & SYSTICK_ENABLE) == 0) { - return; - } - - if (reset) { - s->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - } - s->tick += (s->reload + 1) * systick_scale(s); - timer_mod(s->timer, s->tick); -} - static void systick_timer_tick(void *opaque) { SysTickState *s = (SysTickState *)opaque; @@ -70,10 +50,12 @@ static void systick_timer_tick(void *opaque) /* Tell the NVIC to pend the SysTick exception */ qemu_irq_pulse(s->irq); } - if (s->reload == 0) { - s->control &= ~SYSTICK_ENABLE; - } else { - systick_reload(s, 0); + if (ptimer_get_limit(s->ptimer) == 0) { + /* + * Timer expiry with SYST_RVR zero disables the timer + * (but doesn't clear SYST_CSR.ENABLE) + */ + ptimer_stop(s->ptimer); } } @@ -94,30 +76,11 @@ static MemTxResult systick_read(void *opaque, hwaddr addr, uint64_t *data, s->control &= ~SYSTICK_COUNTFLAG; break; case 0x4: /* SysTick Reload Value. */ - val = s->reload; + val = ptimer_get_limit(s->ptimer); break; case 0x8: /* SysTick Current Value. */ - { - int64_t t; - - if ((s->control & SYSTICK_ENABLE) == 0) { - val = 0; - break; - } - t = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - if (t >= s->tick) { - val = 0; - break; - } - val = ((s->tick - (t + 1)) / systick_scale(s)) + 1; - /* The interrupt in triggered when the timer reaches zero. - However the counter is not reloaded until the next clock - tick. This is a hack to return zero during the first tick. */ - if (val > s->reload) { - val = 0; - } + val = ptimer_get_count(s->ptimer); break; - } case 0xc: /* SysTick Calibration Value. */ val = 10000; break; @@ -149,39 +112,50 @@ static MemTxResult systick_write(void *opaque, hwaddr addr, switch (addr) { case 0x0: /* SysTick Control and Status. */ { - uint32_t oldval = s->control; + uint32_t oldval; + ptimer_transaction_begin(s->ptimer); + oldval = s->control; s->control &= 0xfffffff8; s->control |= value & 7; + if ((oldval ^ value) & SYSTICK_ENABLE) { - int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); if (value & SYSTICK_ENABLE) { - if (s->tick) { - s->tick += now; - timer_mod(s->timer, s->tick); - } else { - systick_reload(s, 1); - } + /* + * Always reload the period in case board code has + * changed system_clock_scale. If we ever replace that + * global with a more sensible API then we might be able + * to set the period only when it actually changes. + */ + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_run(s->ptimer, 0); } else { - timer_del(s->timer); - s->tick -= now; - if (s->tick < 0) { - s->tick = 0; - } + ptimer_stop(s->ptimer); } } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) { - /* This is a hack. Force the timer to be reloaded - when the reference clock is changed. */ - systick_reload(s, 1); + ptimer_set_period(s->ptimer, systick_scale(s)); } + ptimer_transaction_commit(s->ptimer); break; } case 0x4: /* SysTick Reload Value. */ - s->reload = value; + ptimer_transaction_begin(s->ptimer); + ptimer_set_limit(s->ptimer, value & 0xffffff, 0); + ptimer_transaction_commit(s->ptimer); break; - case 0x8: /* SysTick Current Value. Writes reload the timer. */ - systick_reload(s, 1); + case 0x8: /* SysTick Current Value. */ + /* + * Writing any value clears SYST_CVR to zero and clears + * SYST_CSR.COUNTFLAG. The counter will then reload from SYST_RVR + * on the next clock edge unless SYST_RVR is zero. + */ + ptimer_transaction_begin(s->ptimer); + if (ptimer_get_limit(s->ptimer) == 0) { + ptimer_stop(s->ptimer); + } + ptimer_set_count(s->ptimer, 0); s->control &= ~SYSTICK_COUNTFLAG; + ptimer_transaction_commit(s->ptimer); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -210,10 +184,13 @@ static void systick_reset(DeviceState *dev) */ assert(system_clock_scale != 0); + ptimer_transaction_begin(s->ptimer); s->control = 0; - s->reload = 0; - s->tick = 0; - timer_del(s->timer); + ptimer_stop(s->ptimer); + ptimer_set_count(s->ptimer, 0); + ptimer_set_limit(s->ptimer, 0, 0); + ptimer_set_period(s->ptimer, systick_scale(s)); + ptimer_transaction_commit(s->ptimer); } static void systick_instance_init(Object *obj) @@ -229,18 +206,21 @@ static void systick_instance_init(Object *obj) static void systick_realize(DeviceState *dev, Error **errp) { SysTickState *s = SYSTICK(dev); - s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, systick_timer_tick, s); + s->ptimer = ptimer_init(systick_timer_tick, s, + PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); } static const VMStateDescription vmstate_systick = { .name = "armv7m_systick", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(control, SysTickState), - VMSTATE_UINT32(reload, SysTickState), VMSTATE_INT64(tick, SysTickState), - VMSTATE_TIMER_PTR(timer, SysTickState), + VMSTATE_PTIMER(ptimer, SysTickState), VMSTATE_END_OF_LIST() } }; -- cgit v1.1