From 4b635cf7a95e5012113570a87e134962a0271a27 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Fri, 1 Feb 2019 14:55:42 +0000 Subject: hw/arm/armsse: Make SRAM bank size configurable For the IoTKit the SRAM bank size is always 32K (15 bits); for the SSE-200 this is a configurable parameter, which defaults to 32K but can be changed when it is built into a particular SoC. For instance the Musca-B1 board sets it to 128K (17 bits). Make the bank size a QOM property. We follow the SSE-200 hardware in naming the parameter SRAM_ADDR_WIDTH, which specifies the number of address bits of a single SRAM bank. Signed-off-by: Peter Maydell Reviewed-by: Richard Henderson Message-id: 20190121185118.18550-11-peter.maydell@linaro.org --- hw/arm/armsse.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'hw/arm') diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index b639b54..a2ae5d3 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -221,6 +221,7 @@ static void armsse_realize(DeviceState *dev, Error **errp) DeviceState *dev_apb_ppc1; DeviceState *dev_secctl; DeviceState *dev_splitter; + uint32_t addr_width_max; if (!s->board_memory) { error_setg(errp, "memory property was not set"); @@ -232,6 +233,15 @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } + /* max SRAM_ADDR_WIDTH: 24 - log2(SRAM_NUM_BANK) */ + assert(is_power_of_2(info->sram_banks)); + addr_width_max = 24 - ctz32(info->sram_banks); + if (s->sram_addr_width < 1 || s->sram_addr_width > addr_width_max) { + error_setg(errp, "SRAM_ADDR_WIDTH must be between 1 and %d", + addr_width_max); + return; + } + /* Handling of which devices should be available only to secure * code is usually done differently for M profile than for A profile. * Instead of putting some devices only into the secure address space, @@ -352,8 +362,10 @@ static void armsse_realize(DeviceState *dev, Error **errp) for (i = 0; i < info->sram_banks; i++) { char *ramname = g_strdup_printf("armsse.sram%d", i); SysBusDevice *sbd_mpc; + uint32_t sram_bank_size = 1 << s->sram_addr_width; - memory_region_init_ram(&s->sram[i], NULL, ramname, 0x00008000, &err); + memory_region_init_ram(&s->sram[i], NULL, ramname, + sram_bank_size, &err); g_free(ramname); if (err) { error_propagate(errp, err); @@ -372,7 +384,8 @@ static void armsse_realize(DeviceState *dev, Error **errp) } /* Map the upstream end of the MPC into the right place... */ sbd_mpc = SYS_BUS_DEVICE(&s->mpc[i]); - memory_region_add_subregion(&s->container, 0x20000000 + i * 0x8000, + memory_region_add_subregion(&s->container, + 0x20000000 + i * sram_bank_size, sysbus_mmio_get_region(sbd_mpc, 1)); /* ...and its register interface */ memory_region_add_subregion(&s->container, 0x50083000 + i * 0x1000, @@ -748,6 +761,7 @@ static Property armsse_properties[] = { MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_END_OF_LIST() }; -- cgit v1.1