From 8cf68ed9354f3ca68b237ed4fff13c108f0d56dd Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Mon, 15 Feb 2021 11:51:28 +0000 Subject: hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs We create an OR gate to wire together the overflow IRQs for all the UARTs on the board; this has to have twice the number of inputs as there are UARTs, since each UART feeds it a TX overflow and an RX overflow interrupt line. Replace the hardcoded '10' with a calculation based on the size of the uart[] array in the MPS2TZMachineState. (We rely on OR gate inputs that are never wired up or asserted being treated as always-zero.) Signed-off-by: Peter Maydell Reviewed-by: Richard Henderson Message-id: 20210215115138.20465-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'hw/arm/mps2-tz.c') diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index 53886d6..1c1fc34 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -516,13 +516,18 @@ static void mps2tz_common_init(MachineState *machine) */ memory_region_add_subregion(system_memory, 0x80000000, machine->ram); - /* The overflow IRQs for all UARTs are ORed together. + /* + * The overflow IRQs for all UARTs are ORed together. * Tx, Rx and "combined" IRQs are sent to the NVIC separately. - * Create the OR gate for this. + * Create the OR gate for this: it has one input for the TX overflow + * and one for the RX overflow for each UART we might have. + * (If the board has fewer than the maximum possible number of UARTs + * those inputs are never wired up and are treated as always-zero.) */ object_initialize_child(OBJECT(mms), "uart-irq-orgate", &mms->uart_irq_orgate, TYPE_OR_IRQ); - object_property_set_int(OBJECT(&mms->uart_irq_orgate), "num-lines", 10, + object_property_set_int(OBJECT(&mms->uart_irq_orgate), "num-lines", + 2 * ARRAY_SIZE(mms->uart), &error_fatal); qdev_realize(DEVICE(&mms->uart_irq_orgate), NULL, &error_fatal); qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, -- cgit v1.1