From c11a8e890c4a74f58c605f793a46a9094729776a Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Mon, 9 Mar 2020 21:58:15 +0000 Subject: docs/system: Split target-arm.rst into sub-documents MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the documentation for Arm system emulator targets is in a single target-arm.rst. This describes only some of the boards and often in a fairly abbreviated fashion. Restructure it so that each board has its own documentation file in the docs/system/arm/ subdirectory. This will hopefully encourage us to write board documentation that describes the board in detail, rather than a few brief paragraphs in a single long page. The table of contents should also help users to find the board they care about faster. Once the structure is in place we'll be able to move microvm.rst from the top-level docs/ directory. All the text from the old page is retained, except for the final paragraph ("A Linux 2.6 test image is available on the QEMU web site. More information is available in the QEMU mailing-list archive."), which is deleted. The git history shows this was originally added in reference to the integratorcp board (at that time the only Arm board that was supported), and has subsequently gradually been further and further separated from the integratorcp documentation by the insertion of other board documentation sections. It's extremely out of date and no longer accurate, since AFAICT there isn't an integratorcp kernel on the website any more; so better deleted than retained. Signed-off-by: Peter Maydell Reviewed-by: Alex Bennée Reviewed-by: Niek Linnenbank Message-id: 20200309215818.2021-3-peter.maydell@linaro.org --- docs/system/arm/integratorcp.rst | 16 +++ docs/system/arm/musicpal.rst | 19 ++++ docs/system/arm/nseries.rst | 33 ++++++ docs/system/arm/palm.rst | 23 ++++ docs/system/arm/realview.rst | 34 ++++++ docs/system/arm/stellaris.rst | 26 +++++ docs/system/arm/sx1.rst | 18 ++++ docs/system/arm/versatile.rst | 29 +++++ docs/system/arm/xscale.rst | 29 +++++ docs/system/target-arm.rst | 225 +++------------------------------------ 10 files changed, 240 insertions(+), 212 deletions(-) create mode 100644 docs/system/arm/integratorcp.rst create mode 100644 docs/system/arm/musicpal.rst create mode 100644 docs/system/arm/nseries.rst create mode 100644 docs/system/arm/palm.rst create mode 100644 docs/system/arm/realview.rst create mode 100644 docs/system/arm/stellaris.rst create mode 100644 docs/system/arm/sx1.rst create mode 100644 docs/system/arm/versatile.rst create mode 100644 docs/system/arm/xscale.rst (limited to 'docs/system') diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst new file mode 100644 index 0000000..3232b43 --- /dev/null +++ b/docs/system/arm/integratorcp.rst @@ -0,0 +1,16 @@ +Integrator/CP (``integratorcp``) +================================ + +The ARM Integrator/CP board is emulated with the following devices: + +- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU + +- Two PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/musicpal.rst b/docs/system/arm/musicpal.rst new file mode 100644 index 0000000..35c2221 --- /dev/null +++ b/docs/system/arm/musicpal.rst @@ -0,0 +1,19 @@ +Freecom MusicPal (``musicpal``) +=============================== + +The Freecom MusicPal internet radio emulation includes the following +elements: + +- Marvell MV88W8618 ARM core. + +- 32 MB RAM, 256 KB SRAM, 8 MB flash. + +- Up to 2 16550 UARTs + +- MV88W8xx8 Ethernet controller + +- MV88W8618 audio controller, WM8750 CODEC and mixer + +- 128x64 display with brightness control + +- 2 buttons, 2 navigation wheels with button function diff --git a/docs/system/arm/nseries.rst b/docs/system/arm/nseries.rst new file mode 100644 index 0000000..b000b6d --- /dev/null +++ b/docs/system/arm/nseries.rst @@ -0,0 +1,33 @@ +Nokia N800 and N810 tablets (``n800``, ``n810``) +================================================ + +Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / +48) emulation supports the following elements: + +- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core) + +- RAM and non-volatile OneNAND Flash memories + +- Display connected to EPSON remote framebuffer chip and OMAP on-chip + display controller and a LS041y3 MIPI DBI-C controller + +- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen + controllers driven through SPI bus + +- National Semiconductor LM8323-controlled qwerty keyboard driven + through |I2C| bus + +- Secure Digital card connected to OMAP MMC/SD host + +- Three OMAP on-chip UARTs and on-chip STI debugging console + +- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a + TI TUSB6010 chip - only USB host mode is supported + +- TI TMP105 temperature sensor driven through |I2C| bus + +- TI TWL92230C power management companion with an RTC on + |I2C| bus + +- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected + through CBUS diff --git a/docs/system/arm/palm.rst b/docs/system/arm/palm.rst new file mode 100644 index 0000000..0eabf63 --- /dev/null +++ b/docs/system/arm/palm.rst @@ -0,0 +1,23 @@ +Palm Tungsten|E PDA (``cheetah``) +================================= + +The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the +following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -option-rom) + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI TSC2102i touchscreen controller / analog-digital converter / + Audio CODEC, connected through MicroWire and |I2S| busses + +- GPIO-connected matrix keypad + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs diff --git a/docs/system/arm/realview.rst b/docs/system/arm/realview.rst new file mode 100644 index 0000000..8e08eb5 --- /dev/null +++ b/docs/system/arm/realview.rst @@ -0,0 +1,34 @@ +Arm Realview boards (``realview-eb``, ``realview-eb-mpcore``, ``realview-pb-a8``, ``realview-pbx-a9``) +====================================================================================================== + +Several variants of the ARM RealView baseboard are emulated, including +the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only +certain Linux kernel configurations work out of the box on these boards. + +Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET +enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board +should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET +disabled and expect 1024M RAM. + +The following devices are emulated: + +- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU + +- ARM AMBA Generic/Distributed Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 or SMSC LAN9118 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse + +- PCI host bridge + +- PCI OHCI USB controller + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/stellaris.rst b/docs/system/arm/stellaris.rst new file mode 100644 index 0000000..8af4ad7 --- /dev/null +++ b/docs/system/arm/stellaris.rst @@ -0,0 +1,26 @@ +Stellaris boards (``lm3s6965evb``, ``lm3s811evb``) +================================================== + +The Luminary Micro Stellaris LM3S811EVB emulation includes the following +devices: + +- Cortex-M3 CPU core. + +- 64k Flash and 8k SRAM. + +- Timers, UARTs, ADC and |I2C| interface. + +- OSRAM Pictiva 96x16 OLED with SSD0303 controller on + |I2C| bus. + +The Luminary Micro Stellaris LM3S6965EVB emulation includes the +following devices: + +- Cortex-M3 CPU core. + +- 256k Flash and 64k SRAM. + +- Timers, UARTs, ADC, |I2C| and SSI interfaces. + +- OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via + SSI. diff --git a/docs/system/arm/sx1.rst b/docs/system/arm/sx1.rst new file mode 100644 index 0000000..321993b --- /dev/null +++ b/docs/system/arm/sx1.rst @@ -0,0 +1,18 @@ +Siemens SX1 (``sx1``, ``sx1-v1``) +================================= + +The Siemens SX1 models v1 and v2 (default) basic emulation. The +emulation includes the following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB + +- On-chip LCD controller + +- On-chip Real Time Clock + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst new file mode 100644 index 0000000..48b6ca0 --- /dev/null +++ b/docs/system/arm/versatile.rst @@ -0,0 +1,29 @@ +Arm Versatile boards (``versatileab``, ``versatilepb``) +======================================================= + +The ARM Versatile baseboard is emulated with the following devices: + +- ARM926E, ARM1136 or Cortex-A8 CPU + +- PL190 Vectored Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PCI host bridge. Note the emulated PCI bridge only provides access + to PCI memory space. It does not provide access to PCI IO space. This + means some devices (eg. ne2k_pci NIC) are not usable, and others (eg. + rtl8139 NIC) are only usable when the guest drivers use the memory + mapped control registers. + +- PCI OHCI USB controller. + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices. + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/xscale.rst b/docs/system/arm/xscale.rst new file mode 100644 index 0000000..19da2ef --- /dev/null +++ b/docs/system/arm/xscale.rst @@ -0,0 +1,29 @@ +Sharp XScale-based PDA models (``akita``, ``borzoi``, ``spitz``, ``terrier``) +============================================================================= + +The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\" +and \"Terrier\") emulation includes the following peripherals: + +- Intel PXA270 System-on-chip (ARM V5TE core) + +- NAND Flash memory + +- IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\" + +- On-chip OHCI USB controller + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI ADS7846 touchscreen controller on SSP bus + +- Maxim MAX1111 analog-digital converter on |I2C| bus + +- GPIO-connected keyboard controller and LEDs + +- Secure Digital card connected to PXA MMC/SD host + +- Three on-chip UARTs + +- WM8750 audio CODEC on |I2C| and |I2S| busses diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index d2a3b44..c7df6fc 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -3,215 +3,16 @@ ARM System emulator ------------------- -Use the executable ``qemu-system-arm`` to simulate a ARM machine. The -ARM Integrator/CP board is emulated with the following devices: - -- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU - -- Two PL011 UARTs - -- SMC 91c111 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse. - -- PL181 MultiMedia Card Interface with SD card. - -The ARM Versatile baseboard is emulated with the following devices: - -- ARM926E, ARM1136 or Cortex-A8 CPU - -- PL190 Vectored Interrupt Controller - -- Four PL011 UARTs - -- SMC 91c111 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse. - -- PCI host bridge. Note the emulated PCI bridge only provides access - to PCI memory space. It does not provide access to PCI IO space. This - means some devices (eg. ne2k_pci NIC) are not usable, and others (eg. - rtl8139 NIC) are only usable when the guest drivers use the memory - mapped control registers. - -- PCI OHCI USB controller. - -- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM - devices. - -- PL181 MultiMedia Card Interface with SD card. - -Several variants of the ARM RealView baseboard are emulated, including -the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only -certain Linux kernel configurations work out of the box on these boards. - -Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET -enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board -should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET -disabled and expect 1024M RAM. - -The following devices are emulated: - -- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU - -- ARM AMBA Generic/Distributed Interrupt Controller - -- Four PL011 UARTs - -- SMC 91c111 or SMSC LAN9118 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse - -- PCI host bridge - -- PCI OHCI USB controller - -- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM - devices - -- PL181 MultiMedia Card Interface with SD card. - -The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\" -and \"Terrier\") emulation includes the following peripherals: - -- Intel PXA270 System-on-chip (ARM V5TE core) - -- NAND Flash memory - -- IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\" - -- On-chip OHCI USB controller - -- On-chip LCD controller - -- On-chip Real Time Clock - -- TI ADS7846 touchscreen controller on SSP bus - -- Maxim MAX1111 analog-digital converter on |I2C| bus - -- GPIO-connected keyboard controller and LEDs - -- Secure Digital card connected to PXA MMC/SD host - -- Three on-chip UARTs - -- WM8750 audio CODEC on |I2C| and |I2S| busses - -The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the -following elements: - -- Texas Instruments OMAP310 System-on-chip (ARM 925T core) - -- ROM and RAM memories (ROM firmware image can be loaded with - -option-rom) - -- On-chip LCD controller - -- On-chip Real Time Clock - -- TI TSC2102i touchscreen controller / analog-digital converter / - Audio CODEC, connected through MicroWire and |I2S| busses - -- GPIO-connected matrix keypad - -- Secure Digital card connected to OMAP MMC/SD host - -- Three on-chip UARTs - -Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / -48) emulation supports the following elements: - -- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core) - -- RAM and non-volatile OneNAND Flash memories - -- Display connected to EPSON remote framebuffer chip and OMAP on-chip - display controller and a LS041y3 MIPI DBI-C controller - -- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen - controllers driven through SPI bus - -- National Semiconductor LM8323-controlled qwerty keyboard driven - through |I2C| bus - -- Secure Digital card connected to OMAP MMC/SD host - -- Three OMAP on-chip UARTs and on-chip STI debugging console - -- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a - TI TUSB6010 chip - only USB host mode is supported - -- TI TMP105 temperature sensor driven through |I2C| bus - -- TI TWL92230C power management companion with an RTC on - |I2C| bus - -- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected - through CBUS - -The Luminary Micro Stellaris LM3S811EVB emulation includes the following -devices: - -- Cortex-M3 CPU core. - -- 64k Flash and 8k SRAM. - -- Timers, UARTs, ADC and |I2C| interface. - -- OSRAM Pictiva 96x16 OLED with SSD0303 controller on - |I2C| bus. - -The Luminary Micro Stellaris LM3S6965EVB emulation includes the -following devices: - -- Cortex-M3 CPU core. - -- 256k Flash and 64k SRAM. - -- Timers, UARTs, ADC, |I2C| and SSI interfaces. - -- OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via - SSI. - -The Freecom MusicPal internet radio emulation includes the following -elements: - -- Marvell MV88W8618 ARM core. - -- 32 MB RAM, 256 KB SRAM, 8 MB flash. - -- Up to 2 16550 UARTs - -- MV88W8xx8 Ethernet controller - -- MV88W8618 audio controller, WM8750 CODEC and mixer - -- 128x64 display with brightness control - -- 2 buttons, 2 navigation wheels with button function - -The Siemens SX1 models v1 and v2 (default) basic emulation. The -emulation includes the following elements: - -- Texas Instruments OMAP310 System-on-chip (ARM 925T core) - -- ROM and RAM memories (ROM firmware image can be loaded with - -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB - -- On-chip LCD controller - -- On-chip Real Time Clock - -- Secure Digital card connected to OMAP MMC/SD host - -- Three on-chip UARTs - -A Linux 2.6 test image is available on the QEMU web site. More -information is available in the QEMU mailing-list archive. +Use the executable ``qemu-system-arm`` to simulate a ARM machine. + +.. toctree:: + + arm/integratorcp + arm/versatile + arm/realview + arm/xscale + arm/palm + arm/nseries + arm/stellaris + arm/musicpal + arm/sx1 -- cgit v1.1