From 461c51ad4275f199d4b6ff400f39701541529e39 Mon Sep 17 00:00:00 2001 From: Jean-Christophe Dubois Date: Fri, 3 Jul 2020 16:59:41 +0100 Subject: Add a phy-num property to the i.MX FEC emulator We need a solution to use an Ethernet PHY that is not the first device on the MDIO bus (device 0 on MDIO bus). As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but only one MDIO bus on which the 2 related PHY are connected but at unique addresses. Signed-off-by: Jean-Christophe Dubois Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell Signed-off-by: Peter Maydell --- hw/net/imx_fec.c | 24 +++++++++++++++++------- hw/net/trace-events | 4 ++-- include/hw/net/imx_fec.h | 1 + 3 files changed, 20 insertions(+), 9 deletions(-) diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index eefedc2..2c14804 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -280,12 +280,16 @@ static void imx_phy_reset(IMXFECState *s) static uint32_t imx_phy_read(IMXFECState *s, int reg) { uint32_t val; + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return 0; } + reg %= 32; + switch (reg) { case 0: /* Basic Control */ val = s->phy_control; @@ -331,20 +335,25 @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) break; } - trace_imx_phy_read(val, reg); + trace_imx_phy_read(val, phy, reg); return val; } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) { - trace_imx_phy_write(val, reg); + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return; } + reg %= 32; + + trace_imx_phy_write(val, phy, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { @@ -926,7 +935,7 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value, extract32(value, 18, 10))); } else { - /* This a write operation */ + /* This is a write operation */ imx_phy_write(s, extract32(value, 18, 10), extract32(value, 0, 16)); } /* raise the interrupt as the PHY operation is done */ @@ -1315,6 +1324,7 @@ static void imx_eth_realize(DeviceState *dev, Error **errp) static Property imx_eth_properties[] = { DEFINE_NIC_PROPERTIES(IMXFECState, conf), DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1), + DEFINE_PROP_UINT32("phy-num", IMXFECState, phy_num, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/net/trace-events b/hw/net/trace-events index e6875c4..5db4545 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -413,8 +413,8 @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int reg) "0x%04"PRIx32" <= reg[%d]" -imx_phy_write(uint32_t val, int reg) "0x%04"PRIx32" => reg[%d]" +imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" +imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_update_link(const char *s) "%s" imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index 7b3faa4..9f03034 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -268,6 +268,7 @@ typedef struct IMXFECState { uint32_t phy_advertise; uint32_t phy_int; uint32_t phy_int_mask; + uint32_t phy_num; bool is_fec; -- cgit v1.1