From 46188cabae4a13add28493f85b0f65ddde3ead41 Mon Sep 17 00:00:00 2001 From: Michael Rolnik Date: Fri, 24 Jan 2020 01:51:14 +0100 Subject: target/avr: Add instruction translation - MCU Control Instructions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This includes: - BREAK - NOP - SLEEP - WDR Signed-off-by: Michael Rolnik Signed-off-by: Richard Henderson Signed-off-by: Aleksandar Markovic Reviewed-by: Aleksandar Markovic Signed-off-by: Thomas Huth Message-Id: <20200705140315.260514-16-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé --- target/avr/insn.decode | 8 +++++++ target/avr/translate.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+) diff --git a/target/avr/insn.decode b/target/avr/insn.decode index 7bb6ce7..482c23a 100644 --- a/target/avr/insn.decode +++ b/target/avr/insn.decode @@ -177,3 +177,11 @@ BST 1111 101 rd:5 0 bit:3 BLD 1111 100 rd:5 0 bit:3 BSET 1001 0100 0 bit:3 1000 BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000 +NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 diff --git a/target/avr/translate.c b/target/avr/translate.c index 884fbb6..ee78119 100644 --- a/target/avr/translate.c +++ b/target/avr/translate.c @@ -2740,3 +2740,68 @@ static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a) return true; } + +/* + * MCU Control Instructions + */ + +/* + * The BREAK instruction is used by the On-chip Debug system, and is + * normally not used in the application software. When the BREAK instruction is + * executed, the AVR CPU is set in the Stopped Mode. This gives the On-chip + * Debugger access to internal resources. If any Lock bits are set, or either + * the JTAGEN or OCDEN Fuses are unprogrammed, the CPU will treat the BREAK + * instruction as a NOP and will not enter the Stopped mode. This instruction + * is not available in all devices. Refer to the device specific instruction + * set summary. + */ +static bool trans_BREAK(DisasContext *ctx, arg_BREAK *a) +{ + if (!avr_have_feature(ctx, AVR_FEATURE_BREAK)) { + return true; + } + +#ifdef BREAKPOINT_ON_BREAK + tcg_gen_movi_tl(cpu_pc, ctx->npc - 1); + gen_helper_debug(cpu_env); + ctx->bstate = DISAS_EXIT; +#else + /* NOP */ +#endif + + return true; +} + +/* + * This instruction performs a single cycle No Operation. + */ +static bool trans_NOP(DisasContext *ctx, arg_NOP *a) +{ + + /* NOP */ + + return true; +} + +/* + * This instruction sets the circuit in sleep mode defined by the MCU + * Control Register. + */ +static bool trans_SLEEP(DisasContext *ctx, arg_SLEEP *a) +{ + gen_helper_sleep(cpu_env); + ctx->bstate = DISAS_NORETURN; + return true; +} + +/* + * This instruction resets the Watchdog Timer. This instruction must be + * executed within a limited time given by the WD prescaler. See the Watchdog + * Timer hardware specification. + */ +static bool trans_WDR(DisasContext *ctx, arg_WDR *a) +{ + gen_helper_wdr(cpu_env); + + return true; +} -- cgit v1.1