aboutsummaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-11hw/display: Add basic ATI VGA emulationBALATON Zoltan1-0/+1
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and guests running on these and the PMON2000 firmware of the fulong2e expect this to be available. Fortunately these are very similar chips so they can be mostly emulated in the same device model. This patch adds basic emulation of these ATI VGA chips. While this is incomplete and currently only enough to run the MIPS firmware and get framebuffer output with Linux, it allows the fulong2e board to work more like the real hardware and having it in QEMU in this state provides a way to experiment with it and allows others to contribute to improve it. It is compiled for all archs but only the fulong2e (which currently has no display output at all) is set to use it by default (in a separate patch). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-07slirp: move sources to src/ subdirectoryMarc-André Lureau1-3/+0
Prepare for making slirp/ a standalone project. Remove some useless includes while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06migration/ram.c: add a notifier chain for precopyWei Wang1-0/+1
This patch adds a notifier chain for the memory precopy. This enables various precopy optimizations to be invoked at specific places. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Peter Xu <peterx@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-6-git-send-email-wei.w.wang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: Cleanup during exitDr. David Alan Gilbert1-1/+6
Currently we cleanup the migration object as we exit main after the main_loop finishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures. We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits. Cancelling the migration during migration also tries to get the thread to quit. We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190227164900.16378-1-dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-05vl: Set machine ram_size, maxram_size and ram_slots earlierEric Auger1-3/+3
The machine RAM attributes will need to be analyzed during the configure_accelerator() process. especially kvm_type() arm64 machine callback will use them to know how many IPA/GPA bits are needed to model the whole RAM range. So let's assign those machine state fields before calling configure_accelerator. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190304101339.25970-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-14Merge remote-tracking branch ↵Peter Maydell1-6/+0
'remotes/vivier2/tags/trivial-branch-pull-request' into staging - some configure updates (HAX/NetBSD, remove "wav", -Waddress-of-packed-member) - remove deprecated options - some trace and error cleanup - typo fixes # gpg: Signature made Thu 14 Feb 2019 10:46:50 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: configure: improve usbfs check hw/sparc64: Explicitly set default_display = "std" hw/dma/i8257: Use qemu_log_mask(UNIMP) instead of fprintf wavcapture: Convert to error_report kvm: Add kvm_set_ioeventfd* traces HMP: Prepend errors with 'Error:' pckbd: Convert DPRINTF->trace configure: Make -Waddress-of-packed-member warnings be errors configure: Add HAX support in NetBSD configure: fix qemu-img name configure: remove handling of "wav" audio driver qemu-options: Remove deprecated option -clock qemu-deprecated: Remove -virtioconsole and -no-frame for good qapi: Fix qcow2 encryption doc typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-14qemu-options: Remove deprecated option -clockThomas Huth1-6/+0
The option is only a dummy since a long time. We've finally deprecated it in QEMU v3.0, so it's time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1549545296-18903-3-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-13char: allow specifying a GMainContext at opening timePaolo Bonzini1-4/+4
This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-65/+1
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05qemu-options: Remove deprecated "-virtioconsole" optionPaolo Bonzini1-60/+1
It's been deprecated since QEMU 3.0, and nobody complained so far, so it is time to remove this option now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1544684731-18828-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05Remove deprecated -enable-hax optionThomas Huth1-5/+0
Our command line interface is really quite overcrowded, we should avoid duplicated options that do the same thing in just a slightly different way. "-accel hax" is shorter and more generic that "-enable-hax", so there is really no real usage for the latter option. "-enable-hax" has been deprecated since two releases, and nobody complained so far, so it's time to remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1544790073-23049-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05Remove deprecated -no-frame optionThomas Huth1-20/+3
The -no-frame option has been deprecated with QEMU v2.12. It was only useful with SDL1.2 - now that we've removed support for SDL1.2, we can certainly remove the -no-frame option, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1549351769-19620-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-25trace: improve runstate tracingVladimir Sementsov-Ogievskiy1-2/+5
Trace previous state, move tracepoint to runstate_set start (to cover all cases for debugging), add string representations of traced states. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190124125154.474650-1-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-14Remove broken Xen PV domain builderAnthony PERARD1-7/+0
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also, it is not built by default since QEMU 2.6. [1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini1-1/+1
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11accel: Improve selection of the default acceleratorThomas Huth1-1/+1
When compiling with "--disable-tcg", we currently still use "tcg" as default accelerator. "kvm" should be used in this case instead. Also, some downstream distros provide QEMU binaries which have "kvm" in their names (e.g. "qemu-kvm" on RHEL or "kvm" on Ubuntu) that use KVM by default - and some users might want to do something similar with upstream binaries, too. Accomodate them by using "kvm:tcg" as default when we detect such a binary name. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1538748792-19444-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-07qdev-props: remove errp from GlobalPropertyMarc-André Lureau1-1/+0
All qdev_prop_register_global() set &error_fatal for errp, except '-rtc driftfix=slew', which arguably should also use &error_fatal, as otherwise failing to apply the property would only report a warning. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07qdev: all globals are now user-providedMarc-André Lureau1-1/+0
All globals are now either provided via -global or through -cpu features (CPU features are implemented by registering globals). If the global isn't being used, it should warn in either case. We can thus consider that all global_props are "user-provided" globals. No need to track this per-globals anymore. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07hw: apply machine compat properties without touching globalsMarc-André Lureau1-1/+0
Similarly to accel properties, move compat properties out of globals registration, and apply the machine compat properties during device_post_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07hw: apply accel compat properties without touching globalsMarc-André Lureau1-1/+0
Instead of registering compat properties as globals, let's keep them in their own array, to avoid mixing with user globals. Introduce object_apply_global_props() function, to apply compatibility properties from a GPtrArray. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-04fw_cfg: Make qemu_extra_params_fw locallyLi Qiang1-1/+0
qemu_extra_params_fw[] has external linkage, but is used only in fw_cfg_bootsplash(), it makes sense to make it locally. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-4-git-send-email-liq3ea@gmail.com> [PMD: Removed qemu_extra_params_fw declaration in vl.c] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot reboot-timeout error checkingLi Qiang1-1/+1
fw_cfg_reboot() gets option parameter "reboot-timeout" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors, and fails to reject negative values. Positive values above the limit get reported and replaced by the limit. This patch checks for conversion errors properly, and reject all values outside 0...0xffff. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot bootsplash error checkingLi Qiang1-1/+1
fw_cfg_bootsplash() gets option parameter "splash-time" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors. This is needlessly complicated and error-prone. But as "splash-time not specified" is not the same as "splash-time=T" for any T, we need use qemu_opt_get() to check if splash time exists. This patch also make the qemu exit when finding or loading splash file failed. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-12-22vl: Introduce shutdown_notifiersYuval Shaia1-1/+14
Notifier will be used for signaling shutdown event to inform system is shutdown. This will allow devices and other component to run some cleanup code needed before VM is shutdown. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-19hw/smbios: Move to the hw/firmware/ subdirectoryPhilippe Mathieu-Daudé1-1/+1
SMBIOS is just another firmware interface used by some QEMU models. We will later introduce more firmware interfaces in this subdirectory. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19Merge remote-tracking branch ↵Peter Maydell1-5/+2
'remotes/vivier2/tags/trivial-patches-pull-request' into staging Trivial patches (2018-12-18) # gpg: Signature made Tue 18 Dec 2018 14:28:41 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-patches-pull-request: error: Remove NULL checks on error_propagate() calls vl: Use error_fatal to simplify obvious fatal errors (again) i386: hvf: drop debug printf in decode_sldtgroup docs/devel/build-system: fix 'softmu' typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-18vl: Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster1-5/+2
Patch created mechanically by rerunning: $ spatch --in-place --sp-file scripts/coccinelle/use-error_fatal.cocci \ --macro-file scripts/cocci-macro-file.h vl.c Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181213175807.12039-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-18qmp hmp: Make system_wakeup check wake-up support and run stateDaniel Henrique Barboza1-2/+4
The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-18qmp: query-current-machine with wakeup-suspend-supportDaniel Henrique Barboza1-0/+19
When issuing the qmp/hmp 'system_wakeup' command, what happens in a nutshell is: - qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason and notify the event - in the main_loop, all vcpus are paused, a system reset is issued, all subscribers of wakeup_notifiers receives a notification, vcpus are then resumed and the wake up QAPI event is fired Note that this procedure alone doesn't ensure that the guest will awake from SUSPENDED state - the subscribers of the wake up event must take action to resume the guest, otherwise the guest will simply reboot. At this moment, only the ACPI machines via acpi_pm1_cnt_init and xen_hvm_init have wake-up from suspend support. However, only the presence of 'system_wakeup' is required for QGA to support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment. This means that the user/management will expect to suspend the guest using one of those suspend commands and then resume execution using system_wakeup, regardless of the support offered in system_wakeup in the first place. This patch creates a new API called query-current-machine [1], that holds a new flag called 'wakeup-suspend-support' that indicates if the guest supports wake up from suspend via system_wakeup. The machine is considered to implement wake-up support if a call to a new 'qemu_register_wakeup_support' is made during its init, as it is now being done inside acpi_pm1_cnt_init and xen_hvm_init. This allows for any other machine type to declare wake-up support regardless of ACPI state or wakeup_notifiers subscription, making easier for newer implementations that might have their own mechanisms in the future. This is the expected output of query-current-machine when running a x86 guest: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": true}} Running the same x86 guest, but with the --no-acpi option: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": false}} This is the output when running a pseries guest: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": false}} With this extra tool, management can avoid situations where a guest that does not have proper suspend/wake capabilities ends up in inconsistent state (e.g. https://github.com/open-power-host-os/qemu/issues/31). [1] the decision of creating the query-current-machine API is based on discussions in the QEMU mailing list where it was decided that query-target wasn't a proper place to store the wake-up flag, neither was query-machines because this isn't a static property of the machine object. This new API can then be used to store other dynamic machine properties that are scattered around the code ATM. More info at: https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg04235.html Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-2-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-18qmp: Add reason to SHUTDOWN and RESET eventsDominik Csapak1-2/+2
This makes it possible to determine what the exact reason was for a RESET or a SHUTDOWN. A management layer might need the specific reason of those events to determine which cleanups or other actions it needs to do. This patch also updates the iotests to the new expected output that includes the reason. Signed-off-by: Dominik Csapak <d.csapak@proxmox.com> Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: Remove "x-oob", offer capability "oob" unconditionallyPeter Xu1-5/+0
Out-of-band command execution was introduced in commit cf869d53172. Unfortunately, we ran into a regression, and had to turn it into an experimental option for 2.12 (commit be933ffc23). http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html The regression has since been fixed (commit 951702f39c7 "monitor: bind dispatch bh to iohandler context"). A thorough re-review of OOB commands led to a few more issues, which have also been addressed. This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"), and makes QMP monitors again offer capability "oob" whenever they can provide it, i.e. when the monitor's character device is capable of running in an I/O thread. Some trivial touch-up in the test code is required to make sure qmp-test won't break. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20181009062718.1914-4-peterx@redhat.com> [Conflict with "monitor: check if chardev can switch gcontext for OOB" resolved, commit message updated] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-27vl.c: remove outdated commentLi Qiang1-3/+0
Cc: qemu-trivial@nongnu.org Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-Id: <1542276385-7638-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27vl: Improve error message when we can't load fw_cfg from fileLi Qiang1-2/+4
parse_fw_cfg() reports "can't load" without further details. Get the details from g_file_get_contents(), and include them in the error message. Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-Id: <1541051971-28584-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27qapi: add query-display-options commandGerd Hoffmann1-0/+6
Add query-display-options command, which allows querying the qemu display configuration. This isn't particularly useful, except it exposes QAPI type DisplayOptions in query-qmp-schema, so that libvirt can discover recently added -display parameter rendernode (commit d4dc4ab133b). Works around lack of sufficiently powerful command line introspection. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Tested-by: Erik Skultety <eskultet@redhat.com> Message-id: 20181122071613.2889-1-kraxel@redhat.com [ kraxel: reworded commit message as suggested by armbru ]
2018-11-12bt: Mark the bluetooth subsystem as deprecatedThomas Huth1-0/+4
It has been unmaintained since years, and there were only trivial or tree-wide changes to the related files since many years, so the code is likely very bitrotten and broken. For example the following segfaults as soon as as you press a key: qemu-system-x86_64 -usb -device usb-bt-dongle -bt hci -bt device:keyboard Since we are not aware of anybody using bluetooth with the current version of QEMU, let's mark the subsystem as deprecated, with a special request for the users to write to the qemu-devel mailing list in case they still use it (so we could revert the deprecation status in that case). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1542016830-19189-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-06vl: Avoid crash when -mon is underspecifiedEric Blake1-0/+4
A quick coredump on an incomplete command line: ./x86_64-softmmu/qemu-system-x86_64 -mon mode=control,pretty=on #0 0x00007ffff723d9e4 in g_str_hash () at /lib64/libglib-2.0.so.0 #1 0x00007ffff723ce38 in g_hash_table_lookup () at /lib64/libglib-2.0.so.0 #2 0x0000555555cc0073 in object_class_property_find (klass=0x5555566a94b0, name=0x0, errp=0x0) at qom/object.c:1135 #3 0x0000555555cc004b in object_class_property_find (klass=0x5555566a9440, name=0x0, errp=0x0) at qom/object.c:1129 #4 0x0000555555cbfe6e in object_property_find (obj=0x5555568348c0, name=0x0, errp=0x0) at qom/object.c:1080 #5 0x0000555555cc183d in object_resolve_path_component (parent=0x5555568348c0, part=0x0) at qom/object.c:1762 #6 0x0000555555d82071 in qemu_chr_find (name=0x0) at chardev/char.c:802 #7 0x00005555559d77cb in mon_init_func (opaque=0x0, opts=0x5555566b65a0, errp=0x0) at vl.c:2291 Fix it to instead fail gracefully. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20181023213600.364086-1-eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-05fw_cfg: Drop newline in @file descriptionMax Reitz1-1/+1
There is no good reason why there should be a newline in this description, so remove it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05object: Make option help nicer to readMax Reitz1-3/+10
Just like in qemu_opts_print_help(), print the object name as a caption instead of on every single line, indent all options, add angle brackets around types, and align the descriptions after 24 characters. Also, indent every object name in the list of available objects. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-24vl:c: make sure that sockets are calculated correctly in '-smp X' caseIgor Mammedov1-1/+4
commit (5cdc9b76e3 vl.c: Remove dead assignment) removed sockets calculation when 'sockets' weren't provided on CLI since there wasn't any users for it back then. Exiting checks are neither reachable } else if (sockets * cores * threads < cpus) { or nor triggerable if (sockets * cores * threads > max_cpus) so we weren't noticing wrong topology since then, since users recalculate sockets adhoc on their own. However with deprecation check it becomes noticable, for example -smp 2 will start printing warning: "warning: Invalid CPU topology deprecated: sockets (1) * cores (1) * threads (1) != maxcpus (2)" calculating sockets if they weren't specified. Fix it by returning back sockets calculation if it's omitted on CLI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <1536836762-273036-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24vl.c deprecate incorrect CPUs topologyIgor Mammedov1-0/+7
-smp [cpus],sockets/cores/threads[,maxcpus] should describe topology so that total number of logical CPUs [sockets * cores * threads] would be equal to [maxcpus], however historically we didn't have such check in QEMU and it is possible to start VM with an invalid topology. Deprecate invalid options combination so we can make sure that the topology VM started with is always correct in the future. Users with an invalid sockets/cores/threads/maxcpus values should fix their CLI to make sure that [sockets * cores * threads] == [maxcpus] Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1536836762-273036-2-git-send-email-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ehabkost: squashed unit test fix] Message-Id: <20181019215345.521d58d7@igors-macbook-pro.local> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-23Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' ↵Peter Maydell1-86/+54
into staging Error reporting patches for 2018-10-22 # gpg: Signature made Mon 22 Oct 2018 13:20:23 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-10-22: (40 commits) error: Drop bogus "use error_setg() instead" admonitions vpc: Fail open on bad header checksum block: Clean up bdrv_img_create()'s error reporting vl: Simplify call of parse_name() vl: Fix exit status for -drive format=help blockdev: Convert drive_new() to Error vl: Assert drive_new() does not fail in default_drive() fsdev: Clean up error reporting in qemu_fsdev_add() spice: Clean up error reporting in add_channel() tpm: Clean up error reporting in tpm_init_tpmdev() numa: Clean up error reporting in parse_numa() vnc: Clean up error reporting in vnc_init_func() ui: Convert vnc_display_init(), init_keyboard_layout() to Error ui/keymaps: Fix handling of erroneous include files vl: Clean up error reporting in device_init_func() vl: Clean up error reporting in parse_fw_cfg() vl: Clean up error reporting in mon_init_func() vl: Clean up error reporting in machine_set_property() vl: Clean up error reporting in chardev_init_func() qom: Clean up error reporting in user_creatable_add_opts_foreach() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-39/+73
* RTC fixes (Artem) * icount fixes (Artem) * rr fixes (Pavel, myself) * hotplug cleanup (Igor) * SCSI fixes (myself) * 4.20-rc1 KVM header update (myself) * coalesced PIO support (Peng Hao) * HVF fixes (Roman B.) * Hyper-V refactoring (Roman K.) * Support for Hyper-V IPI (Vitaly) # gpg: Signature made Fri 19 Oct 2018 12:47:58 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) replay: pass raw icount value to replay_save_clock target/i386: kvm: just return after migrate_add_blocker failed hyperv_testdev: add SynIC message and event testmodes hyperv: process POST_MESSAGE hypercall hyperv: add support for KVM_HYPERV_EVENTFD hyperv: process SIGNAL_EVENT hypercall hyperv: add synic event flag signaling hyperv: add synic message delivery hyperv: make overlay pages for SynIC hyperv: only add SynIC in compatible configurations hyperv: qom-ify SynIC hyperv:synic: split capability testing and setting i386: add hyperv-stub for CONFIG_HYPERV=n default-configs: collect CONFIG_HYPERV* in hyperv.mak hyperv: factor out arch-independent API into hw/hyperv hyperv: make hyperv_vp_index inline hyperv: split hyperv-proto.h into x86 and arch-independent parts hyperv: rename kvm_hv_sint_route_set_sint hyperv: make HvSintRoute reference-counted hyperv: address HvSintRoute by X86CPU pointer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19vl: Simplify call of parse_name()Markus Armbruster1-4/+2
main() checks for parse_name() failure even though it can't actually fail. That's okay. Simplify it to check by passing &error_fatal, like the other users of qemu_opts_foreach(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-36-armbru@redhat.com>
2018-10-19vl: Fix exit status for -drive format=helpMarkus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181017082702.5581-35-armbru@redhat.com>
2018-10-19blockdev: Convert drive_new() to ErrorMarkus Armbruster1-4/+4
Calling error_report() from within a function that takes an Error ** argument is suspicious. drive_new() calls error_report() even though it can run within drive_init_func(), which takes an Error ** argument. drive_init_func()'s caller main(), via qemu_opts_foreach(), is fine with it, but clean it up anyway: * Convert drive_new() to Error * Update add_init_drive() to report the error received from drive_new() * Make main() pass &error_fatal through qemu_opts_foreach(), drive_init_func() to drive_new() * Make default_drive() pass &error_abort through qemu_opts_foreach(), drive_init_func() to drive_new() Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-34-armbru@redhat.com>
2018-10-19vl: Assert drive_new() does not fail in default_drive()Markus Armbruster1-3/+1
If creating (empty) default drives fails, it's a bug. Therefore, assert() is more appropriate than exit(1). Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20181017082702.5581-33-armbru@redhat.com>
2018-10-19fsdev: Clean up error reporting in qemu_fsdev_add()Markus Armbruster1-5/+3
Calling error_report() from within a function that takes an Error ** argument is suspicious. qemu_fsdev_add() does that, and its caller fsdev_init_func() then fails without setting an error. Its caller main(), via qemu_opts_foreach(), is fine with it, but clean it up anyway. Cc: Greg Kurz <groug@kaod.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Message-Id: <20181017082702.5581-32-armbru@redhat.com>
2018-10-19tpm: Clean up error reporting in tpm_init_tpmdev()Markus Armbruster1-3/+1
Calling error_report() in a function that takes an Error ** argument is suspicious. tpm_init_tpmdev() does that, and then fails without setting an error. Its caller main(), via tpm_init() and qemu_opts_foreach(), is fine with it, but clean it up anyway. Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20181017082702.5581-30-armbru@redhat.com>
2018-10-19vnc: Clean up error reporting in vnc_init_func()Markus Armbruster1-1/+1
Calling error_report() in a function that takes an Error ** argument is suspicious. vnc_init_func() does that, and then fails without setting an error. Its caller main(), via qemu_opts_foreach(), is fine with it, but clean it up anyway. While there, drop a "Failed to start VNC server: " error message prefix that doesn't really add value. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-28-armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-19vl: Clean up error reporting in device_init_func()Markus Armbruster1-7/+3
Calling error_report() in a function that takes an Error ** argument is suspicious. device_init_func() does that, and then fails without setting an error. Its caller main(), via qemu_opts_foreach(), is fine with it, but clean it up anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-25-armbru@redhat.com>
generated by cgit v1.1 at 2024-12-27 03:22:18 +0000