aboutsummaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Collapse)AuthorFilesLines
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau1-12/+13
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-24oslib-win32: only provide localtime_r/gmtime_r if missingDaniel P. Berrange1-0/+2
The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-24qemu-thread: add a fast path to the Win32 QemuEventPaolo Bonzini1-4/+62
QemuEvents are used heavily by call_rcu. We do not want them to be slow, but the current implementation does a kernel call on every invocation of qemu_event_* and won't cut it. So, wrap a Win32 manual-reset event with a fast userspace path. The states and transitions are the same as for the futex and mutex/condvar implementations, but the slow path is different of course. The idea is to reset the Win32 event lazily, as part of a test-reset-test-wait sequence. Such a sequence is, indeed, how QemuEvents are used by RCU and other subsystems! The patch includes a formal model of the algorithm. Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-18error: New error_fatalMarkus Armbruster1-13/+21
Similar to error_abort, but doesn't report where the error was created, and terminates the process with exit(1) rather than abort(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18error: Copy location information in error_copy()Eric Blake1-0/+3
Commit 1e9b65bb forgot to propagate source information to copied errors. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1441902890-23064-1-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-18hmp: Allow for error message hints on HMPEric Blake2-7/+36
Commits 7216ae3d and d2828429 disabled some error message hints, all because a change to use modern error reporting meant that the hint would be output prior to the actual error. Fix this by making hints a first-class member of Error. For example, we are now back to the pleasant: $ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=, qemu-system-x86_64: --chardev null,id=,: Parameter 'id' expects an identifier Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1441901956-21991-1-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-18error: only prepend timestamp on stderrStefan Hajnoczi1-1/+1
The -msg timestamp=on option prepends a timestamp to error messages. This is useful on stderr where it allows users to identify when an error was raised. Timestamps do not make sense on the monitor since error_report() is called in response to a synchronous monitor command and the user already knows "when" the command was issued. Additionally, the rest of the monitor conversation lacks timestamps so the error timestamp cannot be correlated with other activity. Only prepend timestamps on stderr. This fixes libvirt's 'drive_del' processing, which did not expect a timestamp. Other QEMU monitor clients are probably equally confused by timestamps on monitor error messages. Cc: Markus Armbruster <armbru@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Frank Schreuder <fschreuder@transip.nl> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <1439212541-16997-1-git-send-email-stefanha@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Frank Schreuder <fschreuder@transip.nl> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-16Revert "rcu: init rcu_registry_lock after fork"Paolo Bonzini1-6/+1
This reverts commit 5243722376873a48e9852a58b91f4d4101ee66e4. The patch forgot about rcu_sync_lock and was committed by mistake. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell3-2/+166
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11typofixes - v4Veres Lajos1-1/+1
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11opts: produce valid command line in qemu_opts_printKővágó, Zoltán1-3/+26
This will let us print options in a format that the user would actually write it on the command line (foo=bar,baz=asd,etc=def), without prepending a spurious comma at the beginning of the list, or quoting values unnecessarily. This patch provides the following changes: * write and id=, if the option has an id * do not print separator before the first element * do not quote string arguments * properly escape commas (,) for QEMU Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange1-1/+1
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10error: On abort, report where the error was createdMarkus Armbruster1-16/+39
This is particularly useful when we abort in error_propagate(), because there the stack backtrace doesn't lead to where the error was created. Looks like this: Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322: qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action Aborted (core dumped) Note: to get this example output, I monkey-patched drive_new() to pass &error_abort to blockdev_init(). To keep the error handling boiler plate from growing even more, all error_setFOO() become macros expanding into error_setFOO_internal() with additional __FILE__, __LINE__, __func__ arguments. Not exactly pretty, but it works. The macro trickery breaks down when you take the address of an error_setFOO(). Fortunately, we do that in just one place: qemu-ga's Windows VSS provider and requester DLL wants to call error_setg_win32() through a function pointer "to avoid linking glib to the DLL". Use error_setg_win32_internal() there. The use of the function pointer is already wrapped in a macro, so the churn isn't bad. Code size increases by some 35KiB for me (0.7%). Tolerable. Could be less if we passed relative rather than absolute source file names to the compiler, or forwent reporting __func__. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-09-10error: error_set_errno() is unused, dropMarkus Armbruster1-3/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10qga: Clean up unnecessarily dirty castsMarkus Armbruster1-3/+2
qga_vss_fsfreeze() casts error_set_win32() from void (*)(Error **, int, ErrorClass, const char *, ...) to void (*)(void **, int, int, const char *, ...) The result is later called. Since the two types are not compatible, the call is undefined behavior. It works in practice anyway. However, there's no real need for trickery here. Clean it up as follows: * Declare struct Error, and fix the first parameter. * Switch to error_setg_win32(). This gets rid of the troublesome ErrorClass parameter. Requires converting error_setg_win32() from macro to function, but that's trivially easy, because this is the only user of error_set_win32(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10error: Make error_setg() a functionMarkus Armbruster1-0/+9
Saves a tiny amount of code at every call site. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10error: De-duplicate code creating Error objectsMarkus Armbruster1-43/+25
Duplicated when commit 680d16d added error_set_errno(), and again when commit 20840d4 added error_set_win32(). Make the original copy in error_set() reusable by factoring out error_setv(), then rewrite error_set_errno() and error_set_win32() on top of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10cutils: work around platform differences in strto{l,ul,ll,ull}Paolo Bonzini1-5/+19
Linux returns 0 if no conversion was made, while OS X and presumably the BSDs return EINVAL. The OS X convention rejects more invalid inputs, so convert to it and adjust the test case. Windows returns 1 from strtoul and strtoull (instead of -1) for negative out-of-range input; fix it up. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09cutils: Add qemu_strtoull() wrapperCarlos L. Torres1-0/+23
Add wrapper for strtoull() function. Include unit tests. Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com> Message-Id: <e0f0f611c9a81f3c29f451d0b17d755dfab1e90a.1437346779.git.carlos.torres@rackspace.com> [Use uint64_t in prototype. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09cutils: Add qemu_strtoll() wrapperCarlos L. Torres1-0/+23
Add wrapper for strtoll() function. Include unit tests. Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com> Message-Id: <7454a6bb9ec03b629e8beb4f109dd30dc2c9804c.1437346779.git.carlos.torres@rackspace.com> [Use int64_t in prototype, since that's what QEMU uses. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09cutils: Add qemu_strtoul() wrapperCarlos L. Torres1-0/+32
Add wrapper for strtoul() function. Include unit tests. Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com> Message-Id: <9621b4ae8e35fded31c715c2ae2a98f904f07ad0.1437346779.git.carlos.torres@rackspace.com> [Fix tests for 32-bit build. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09cutils: Add qemu_strtol() wrapperCarlos L. Torres1-0/+58
Add wrapper for strtol() function. Include unit tests. Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com> Message-Id: <07199f1c0ff3892790c6322123aee1e92f580550.1437346779.git.carlos.torres@rackspace.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09rcu: init rcu_registry_lock after forkEmilio G. Cota1-1/+6
We were unlocking this lock after fork, which is wrong since only the thread that holds a mutex is allowed to unlock it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1440375847-17603-9-git-send-email-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07Make pow2ceil() and pow2floor() inlinePeter Maydell1-23/+0
Since the pow2floor() function is now used in a hot code path, make it inline; for consistency, provide pow2ceil() as an inline function too. Because these functions use ctz64() we have to put the inline versions into host-utils.h, so they have access to ctz64(), and move the inline is_power_of_2() along with them. We then need to include host-utils.h from qemu-common.h so that the files which use these functions via qemu-common.h still have access to them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1437741192-20955-7-git-send-email-peter.maydell@linaro.org
2015-09-07Remove unused qemu_fls functionPeter Maydell1-5/+0
Nothing uses qemu_fls() any more, so delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1437741192-20955-6-git-send-email-peter.maydell@linaro.org
2015-09-04qemu-iotests: s390x: fix test 049, reject negative sizes in QemuOptsBo Tu1-0/+5
when creating an image qemu-img enable us specifying the size of the image using -o size=xx options. But when we specify an invalid size such as a negtive size then different platform gives different result. parse_option_size() function in util/qemu-option.c will be called to parse the size, a cast was called in the function to cast the input (saved as a double in the function) size to an unsigned int64 value, when the input is a negtive value or exceeds the maximum of uint64, then the result is undefined. According to C99 6.3.1.4, the result of converting a floating point number to an integer that cannot represent the (integer part of) number is undefined. And sure enough the results are different on x86 and s390. C99 Language spec 6.3.1.4 Real floating and integers: the result of this assignment/cast is undefined if the float is not in the open interval (-1, U<type>_MAX+1). Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-02qemu-thread: handle spurious futex_wait wakeupsEmilio G. Cota1-1/+10
Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1440375847-17603-12-git-send-email-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-18Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-13/+35
* SCSI fixes from Stefan and Fam * vhost-scsi fix from Igor and Lu Lina * a build system fix from Daniel * two more multi-arch-related patches from Peter C. * TCG patches from myself and Sergey Fedorov * RCU improvement from Wen Congyang * a few more simple cleanups # gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: disas: Defeature print_target_address hw: fix mask for ColdFire UART command register scsi-generic: identify AIO callbacks more clearly scsi-disk: identify AIO callbacks more clearly scsi: create restart bottom half in the right AioContext configure: only add CONFIG_RDMA to config-host.h once qemu-nbd: remove unnecessary qemu_notify_event() vhost-scsi: Clarify vhost_virtqueue_mask argument exec: use macro ROUND_UP for alignment rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu() exec: drop cpu_can_do_io, just read cpu->can_do_io cpu_defs: Simplify CPUTLB padding logic cpu-exec: Do not invalidate original TB in cpu_exec_nocache() vhost/scsi: call vhost_dev_cleanup() at unrealize() time virtio-scsi-test: Add test case for tail unaligned WRITE SAME scsi-disk: Fix assertion failure on WRITE SAME tests: virtio-scsi: clear unit attention after reset scsi-disk: fix cmd.mode field typo virtio-scsi: use virtqueue_map_sg() when loading requests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-14rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu()Wen Congyang1-13/+35
If rcu_(un)register_thread() is called together with synchronize_rcu(), it will wait for the synchronize_rcu() to finish. But when synchronize_rcu() waits for some events, we can modify the list registry. We also use the lock rcu_gp_lock to assume that synchronize_rcu() isn't executed in more than one thread at the same time. Add a new mutex lock rcu_sync_lock to assume it and rename rcu_gp_lock to rcu_registry_lock. Release rcu_registry_lock when synchronize_rcu() waits for some events. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Message-Id: <55B59652.4090503@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-05throttle: refuse bps_max/iops_max without bps/iopsStefan Hajnoczi1-0/+15
The bps_max/iops_max values are meaningless without corresponding bps/iops values. Reported an error if bps_max/iops_max is given without bps/iops. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1438683733-21111-2-git-send-email-stefanha@redhat.com
2015-07-24rcu: actually register threads that have RCU read-side critical sectionsPaolo Bonzini1-0/+2
Otherwise, grace periods are detected too early! Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-20timer: rename NSEC_PER_SEC due to Mac OS X header clashStefan Hajnoczi1-2/+2
Commit e0cf11f31c24cfb17f44ed46c254d84c78e7f6e9 ("timer: Use a single definition of NSEC_PER_SEC for the whole codebase") renamed NANOSECONDS_PER_SECOND to NSEC_PER_SEC. On Mac OS X there is a <dispatch/time.h> system header which also defines NSEC_PER_SEC. This causes compiler warnings. Let's use the old name instead. It's longer but it doesn't clash. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1436364609-7929-1-git-send-email-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07crypto: move built-in AES implementation into crypto/Daniel P. Berrange2-1653/+1
To prepare for a generic internal cipher API, move the built-in AES implementation into the crypto/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-7/+7
* more of Peter Crosthwaite's multiarch preparation patches * unlocked MMIO support in KVM * support for compilation with ICC # gpg: Signature made Mon Jul 6 13:59:20 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: exec: skip MMIO regions correctly in cpu_physical_memory_write_rom_internal Stop including qemu-common.h in memory.h kvm: Switch to unlocked MMIO acpi: mark PMTIMER as unlocked kvm: Switch to unlocked PIO kvm: First step to push iothread lock out of inner run loop memory: let address_space_rw/ld*/st* run outside the BQL exec: pull qemu_flush_coalesced_mmio_buffer() into address_space_rw/ld*/st* memory: Add global-locking property to memory regions main-loop: introduce qemu_mutex_iothread_locked main-loop: use qemu_mutex_lock_iothread consistently Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES cpu-defs: Move out TB_JMP defines include/exec: Move tb hash functions out include/exec: Move standard exceptions to cpu-all.h cpu-defs: Move CPU_TEMP_BUF_NLONGS to tcg memory_mapping: Rework cpu related includes cutils: allow compilation with icc qemu-common: add VEC_OR macro Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-02timer: Use a single definition of NSEC_PER_SEC for the whole codebaseAlberto Garcia1-2/+2
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: c6e55468856ba0b8f95913c4da111cc0ef266541.1434113783.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-26cutils: allow compilation with iccArtyom Tarasenko1-7/+7
Use VEC_OR macro for operations on VECTYPE operands Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <3f62d7a3a265f7dd99e50d016a0333a99a4a082a.1435062067.git.atar4qemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell2-1/+26
staging # gpg: Signature made Wed Jun 24 16:27:53 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: virito-blk: drop duplicate check qemu-iotests: fix 051.out after qdev error message change iov: don't touch iov in iov_send_recv() raw-posix: Introduce hdev_is_sg() raw-posix: Use DPRINTF for DEBUG_FLOPPY raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT Fix migration in case of scsi-generic block: Use bdrv_is_sg() everywhere nvme: Fix memleak in nvme_dma_read_prp vvfat: add a label option util/hbitmap: Add an API to reset all set bits in hbitmap virtio-blk: Use blk_drain() to drain IO requests block-backend: Introduce blk_drain() throttle: Check current timers before updating any_timer_armed[] block: Let bdrv_drain_all() to call aio_poll() for each AioContext Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23util/qemu-sockets: improve ai_flag hints for ipv6 hostsWolfgang Bumiller1-3/+6
*) Do not use AI_ADDRCONFIG on listening sockets, because this flag makes it impossible to explicitly listen on '127.0.0.1' if no global ipv4 address is configured additionally, making this a very uncomfortable option. *) Add AI_V4MAPPED hint for connecting sockets. If your system is globally only connected via ipv6 you often still want to be able to use '127.0.0.1' and 'localhost' (even if localhost doesn't also have an ipv6 entry). For example, PVE - unless explicitly asking for insecure mode - uses ipv4 loopback addresses with QEMU for live migrations tunneled over SSH. These fail to start because AI_ADDRCONFIG makes getaddrinfo refuse to work with '127.0.0.1'. As for the AI_V4MAPPED flag: glibc uses it by default, and providing non-0 flags removes it. I think it makes sense to use it. I also want to point out that glibc explicitly sidesteps POSIX standards when passing 0 as hints by then assuming both AI_V4MAPPED and AI_ADDRCONFIG (the latter being a rather weird choice IMO), while according to POSIX.1-2001 it should be assumed 0. (glibc considers its choice an improvement.) Since either AI_CANONNAME or AI_PASSIVE are passed in our cases, glibc's default flags in turn are disabled again unless explicitly added, which I do with this patch. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23iov: don't touch iov in iov_send_recv()Wen Congyang1-1/+13
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Message-id: 555D39D2.4000705@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23util/hbitmap: Add an API to reset all set bits in hbitmapWen Congyang1-0/+13
The function bdrv_clear_dirty_bitmap() is updated to use faster hbitmap_reset_all() call. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 555E868A.60506@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster2-0/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-2/+2
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-10/+12
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster1-6/+19
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake1-1/+1
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-12Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-33/+48
staging # gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: qemu-iotests: expand test 093 to support group throttling throttle: Update throttle infrastructure copyright throttle: add the name of the ThrottleGroup to BlockDeviceInfo throttle: acquire the ThrottleGroup lock in bdrv_swap() throttle: Add throttle group support throttle: Add throttle group infrastructure tests throttle: Add throttle group infrastructure throttle: Extract timers from ThrottleState into a separate structure raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size Revert "iothread: release iothread around aio_poll" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12throttle: Update throttle infrastructure copyrightAlberto Garcia1-3/+5
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 07dcd4ed02f0110b13b3140f477b761b8bb8e270.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12throttle: Extract timers from ThrottleState into a separate structureBenoît Canet1-30/+43
Group throttling will share ThrottleState between multiple bs. As a consequence the ThrottleState will be accessed by multiple aio context. Timers are tied to their aio context so they must go out of the ThrottleState structure. This commit paves the way for each bs of a common ThrottleState to have its own timer. Signed-off-by: Benoit Canet <benoit.canet@nodalink.com> Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 6cf9ea96d8b32ae2f8769cead38f68a6a0c8c909.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12event-notifier: Always return 0 for posix implementationFam Zheng1-1/+2
qemu_set_fd_handler cannot fail, let's always return 0. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-13-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-11-20 10:38:39 +0000