aboutsummaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Collapse)AuthorFilesLines
2016-06-30qapi: Fix memleak in string visitors on int listsEric Blake1-46/+29
Commit 7f8f9ef1 introduced the ability to store a list of integers as a sorted list of ranges, but when merging ranges, it leaks one or more ranges. It was also using range_get_last() incorrectly within range_compare() (a range is a start/end pair, but range_get_last() is for start/len pairs), and will also mishandle a range ending in UINT64_MAX (remember, we document that no range covers 2**64 bytes, but that ranges that end on UINT64_MAX have end < begin). The whole merge algorithm was rather complex, and included unnecessary passes over data within glib functions, and enough indirection to make it hard to easily plug the data leaks. Since we are already hard-coding things to a list of ranges, just rewrite the thing to open-code the traversal and comparisons, by making the range_compare() helper function give us an answer that is easier to use, at which point we avoid the need to pass any callbacks to g_list_*(). Then by reusing range_extend() instead of duplicating effort with range_merge(), we cover the corner cases correctly. Drop the now-unused range_merge() and ranges_can_merge(). Doing this lets test-string-{input,output}-visitor pass under valgrind without leaks. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-4-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Comment hoisted out of loop] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-30qapi: Simplify use of range.hEric Blake1-4/+16
Calling our function g_list_insert_sorted_merged is a misnomer, since we are NOT writing a glib function. Furthermore, we are making every caller pass the same comparator function of range_merge(): any caller that would try otherwise would break in weird ways since our internal call to ranges_can_merge() is hard-coded to operate only on ranges, rather than paying attention to the caller's comparator. Better is to fix things so that callers don't have to care about our internal comparator, by picking a function name and updating the parameter type away from a gratuitous use of void*, to make it obvious that we are operating specifically on a list of ranges and not a generic list. Plus, refactoring the code here will make it easier to plug a memory leak in the next patch. range_compare() is now internal only, and moves to the .c file. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-3-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-30range: Create range.c for code that should not be inlineEric Blake2-0/+82
g_list_insert_sorted_merged() is rather large to be an inline function; move it to its own file. range_merge() and ranges_can_merge() can likewise move, as they are only used internally. Also, it becomes obvious that the condition within range_merge() is already satisfied by its caller, and that the return value is not used. The diffstat is misleading, because of the copyright boilerplate. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+18
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29socket: unlink unix socket on removeMarc-André Lureau1-0/+18
qemu leaves unix socket files behind when removing a listening chardev or leaving. qemu could clean that up, even if doing so isn't race-free. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1347077 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-28Change net/socket.c to use socket_*() functionsAshijeet Acharya1-0/+36
Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. Thetask was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+13
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20trace: split out trace events for util/ directoryDaniel P. Berrange1-0/+13
Move all trace-events for files in the util/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-3-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20log: Fix qemu_set_log_filename() error handlingMarkus Armbruster1-3/+3
When qemu_set_log_filename() detects an invalid file name, it reports an error, closes the log file (if any), and starts logging to stderr (unless daemonized or nothing is being logged). This is wrong. Asking for an invalid log file on the command line should be fatal. Asking for one in the monitor should fail without messing up an existing logfile. Fix by converting qemu_set_log_filename() to Error. Pass it &error_fatal, except for hmp_logfile report errors. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Fix qemu_set_dfilter_ranges() error reportingMarkus Armbruster1-56/+57
g_error() is not an acceptable way to report errors to the user: $ qemu-system-x86_64 -dfilter 1000+0 ** (process:17187): ERROR **: Failed to parse range in: 1000+0 Trace/breakpoint trap (core dumped) g_assert() isn't, either: $ qemu-system-x86_64 -dfilter 1000x+64 ** ERROR:/work/armbru/qemu/util/log.c:180:qemu_set_dfilter_ranges: assertion failed: (e == range_op) Aborted (core dumped) Convert qemu_set_dfilter_ranges() to Error. Rework its deeply nested control flow. Touch up the error messages. Call it with &error_fatal. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Plug memory leak on multiple -dfilterMarkus Armbruster1-0/+7
-dfilter overwrites any previous filter. The overwritten filter is leaked. Leaks since the beginning (commit 3514552, v2.6.0). Free it properly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-5/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-16avx2 configure: Use primitives in testDr. David Alan Gilbert1-7/+1
Use the avx2 primitives during the test, thus making sure that the compiler and assembler could actually use avx2. This also detects the failure case on gcc 4.8.x with -save-temps and avoids the need for the gcc version check in cutils. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16clean-includes: run it once morePaolo Bonzini2-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini4-8/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16hbitmap: add 'pos < size' assertsVladimir Sementsov-Ogievskiy1-0/+3
For now, fail in hbitmap_set on start + count > size will come from hbitmap_set hb_count_between hbitmap_iter_init assert(pos < hb->size) This patch adds such checks to set/get/reset functions of hbitmap. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 1465924093-76875-2-git-send-email-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-11qht: QEMU's fast, resizable and scalable Hash TableEmilio G. Cota2-0/+834
This is a fast, scalable chained hash table with optional auto-resizing, allowing reads that are concurrent with reads, and reads/writes that are concurrent with writes to separate buckets. A hash table with these features will be necessary for the scalability of the ongoing MTTCG work; before those changes arrive we can already benefit from the single-threaded speedup that qht also provides. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1465412133-3029-11-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-11qdist: add module to represent frequency distributions of dataEmilio G. Cota2-0/+396
Sometimes it is useful to have a quick histogram to represent a certain distribution -- for example, when investigating a performance regression in a hash table due to inadequate hashing. The appended allows us to easily represent a distribution using Unicode characters. Further, the data structure keeping track of the distribution is so simple that obtaining its values for off-line processing is trivial. Example, taking the last 10 commits to QEMU: Characters in commit title Count ----------------------------------- 39 1 48 1 53 1 54 2 57 1 61 1 67 1 78 1 80 1 qdist_init(&dist); qdist_inc(&dist, 39); [...] qdist_inc(&dist, 80); char *str = qdist_pr(&dist, 9, QDIST_PR_LABELS); // -> [39.0,43.6)▂▂ █▂ ▂ ▄[75.4,80.0] g_free(str); char *str = qdist_pr(&dist, 4, QDIST_PR_LABELS); // -> [39.0,49.2)▁█▁▁[69.8,80.0] g_free(str); Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1465412133-3029-9-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-07Merge remote-tracking branch ↵Peter Maydell5-5/+0
'remotes/mjt/tags/pull-trivial-patches-2016-06-07' into staging trivial patches for 2016-06-07 # gpg: Signature made Tue 07 Jun 2016 16:20:52 BST # gpg: using RSA key 0xBEE59D74A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2016-06-07: (51 commits) hbitmap: Use DIV_ROUND_UP qemu-timer: Use DIV_ROUND_UP linux-user: Use DIV_ROUND_UP slirp: Use DIV_ROUND_UP usb: Use DIV_ROUND_UP rocker: Use DIV_ROUND_UP SPICE: Use DIV_ROUND_UP audio: Use DIV_ROUND_UP xen: Use DIV_ROUND_UP crypto: Use DIV_ROUND_UP block: Use DIV_ROUND_UP qed: Use DIV_ROUND_UP qcow/qcow2: Use DIV_ROUND_UP parallels: Use DIV_ROUND_UP coccinelle: use macro DIV_ROUND_UP instead of (((n) + (d) - 1) /(d)) thunk: Rename args and fields in host-target bitmask conversion code thunk: Drop unused NO_THUNK_TYPE_SIZE guards qemu-common.h: Drop WORDS_ALIGNED define host-utils: Prefer 'false' for bool type docs/multi-thread-compression: Fix wrong command string ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07all: Remove unnecessary glib.h includesPeter Maydell5-5/+0
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07throttle: refuse iops-size without iops-total/read/writeStefan Hajnoczi1-0/+8
In a similar vein to commit ee2bdc33c913b7d765baa5aa338c29fb30a05c9a ("throttle: refuse bps_max/iops_max without bps/iops") it is likely that the user made a configuration error if iops-size has been set but no iops limit has been set. Print an error message so the user can check their throttling configuration. They should either remove iops-size if they don't want any throttling or specify one of iops-total, iops-read, or iops-write. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1464828031-25601-1-git-send-email-stefanha@redhat.com
2016-05-26migration: add reporting of errors for outgoing migrationDaniel P. Berrange1-1/+1
Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-23osdep: Move default qemu_hw_version() value to a macroEduardo Habkost1-8/+1
The macro will be used by code that will stop calling qemu_hw_version() at runtime and just need a constant value. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-23exec.c: Ensure right alignment also for file backed ramDominik Dingel1-13/+0
While in the anonymous ram case we already take care of the right alignment such an alignment gurantee does not exist for file backed ram allocation. Instead, pagesize is used for alignment. On s390 this is not enough for gmap, as we need to satisfy an alignment up to segments. Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Message-Id: <1461585338-45863-1-git-send-email-dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: stop including qemu/host-utils.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are some inclusions of qemu/host-utils.h in headers, but they are all necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19log: do not use CONFIG_USER_ONLYPaolo Bonzini1-2/+10
This decouples logging further from config-target.h Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil1-2/+2
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18util: fix comment typosWei Jiangang2-3/+3
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-16rfifolock: no need to get thread identifier when nestingChanglong Xie1-1/+1
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1462874348-32396-1-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-12qapi: Use strict QMP input visitor in more placesEric Blake1-1/+1
The following uses of a QMP input visitor should be strict (that is, excess keys in QDict input should be flagged if not converted to QAPI): - Testsuite code unrelated to explicitly testing non-strict mode (test-qmp-commands, test-visitor-serialization); since we want more code to be strict by default, having more tests of strict mode doesn't hurt - Code used for cloning QAPI objects (replay-input.c, qemu-sockets.c); we are reparsing a QObject just barely produced by the qmp output visitor and which therefore should not have any garbage, so while it is extra work to be strict, it validates that our clone is correct [note that a later patch series will simplify these two uses by creating an actual clone visitor that is much more efficient than a generate/reparse cycle] - qmp_object_add(), which calls into user_creatable_add_type(). Since command line parsing for '-object' uses the same user_creatable_add_type() through the OptsVisitor, and that is always strict, we want to ensure that any nested dictionaries would be treated the same in QMP and from the command line (I don't actually know if such nested dictionaries exist). Note that on this code change, strictness only matters for nested dictionaries (if even possible), since we already flag excess input at the top level during an earlier object_property_set() on an unknown key, whether from QemuOpts: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found or from QMP: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio {"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}} {"error": {"class": "GenericError", "desc": "Property '.foo' not found"}} The only remaining uses of non-strict input visits are: - QMP 'qom-set' (which eventually executes object_property_set_qobject()) - mark it as something to revisit in the future (I didn't want to spend any more time on this patch auditing if we have any QOM dictionary properties that might be impacted, and couldn't easily prove whether this code path is shared with anything else). - test-qmp-input-visitor: explicit tests of non-strict mode. If we later get rid of users that don't need strictness, then this test should be merged with test-qmp-input-strict Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qapi: Consolidate QMP input visitor creationEric Blake1-1/+1
Rather than having two separate ways to create a QMP input visitor, where the safer approach has the more verbose name, it is better to consolidate things into a single function where the caller must explicitly choose whether to be strict or to ignore excess input. This patch is the strictly mechanical conversion; the next patch will then audit which uses can be made stricter. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-28QemuOpts: Fix qemu_opts_foreach() dangling location regressionMarkus Armbruster1-3/+3
qemu_opts_foreach() pushes and pops a Location with automatic storage duration. Except it fails to pop when @func() returns non-zero. cur_loc then points to unused stack space, and will most likely get clobbered in short order. Clobbered cur_loc can make loc_pop() and error_print_loc() crash or report bogus locations. Affects several qemu command line options as well as qemu-img, qemu-io, qemu-nbd -object, and blkdebug's configuration file. Broken in commit a4c7367, v2.4.0. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar main() reports "Property '.foo' not found" like this: if (qemu_opts_foreach(qemu_find_opts("object"), user_creatable_add_opts_foreach, object_create_delayed, &err)) { error_report_err(err); exit(1); } cur_loc then points to where qemu_opts_foreach()'s Location used to be, i.e. unused stack space. With optimization, this Location doesn't get clobbered for me, and also happens to be the correct location. Without optimization, it does get clobbered in a way that makes error_report_err() report no location. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-04-22event-notifier: Add "is_external" parameterFam Zheng2-1/+4
All callers pass "false" keeping the old semantics. The windows implementation doesn't distinguish the flag yet. On posix, it is passed down to the underlying aio context. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22util: align memory allocations to 2M on AArch64Christoffer Dall1-1/+2
For KVM to use Transparent Huge Pages (THP) we have to ensure that the alignment of the userspace address of the KVM memory slot and the IPA that the guest sees for a memory region have the same offset from the 2M huge page size boundary. One way to achieve this is to always align the IPA region at a 2M boundary and ensure that the mmap alignment is also at 2M. Unfortunately, we were only doing this for __arm__, not for __aarch64__, so add this simple condition. This fixes a performance regression using KVM/ARM on AArch64 platforms that showed a performance penalty of more than 50%, introduced by the following commit: 9fac18f (oslib: allocate PROT_NONE pages on top of RAM, 2015-09-10) We were only lucky before the above commit, because we were allocating large regions and naturally getting a 2M alignment on those allocations then. Cc: qemu-stable@nongnu.org Reported-by: Shih-Wei Li <shihwei@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped long line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-06util: Improved qemu_hexmap() to include an ascii dump of the bufferIsaac Lozano1-11/+22
qemu_hexdump() in util/hexdump.c has been changed to give also include a ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have been replaced with calls to qemu_hexdump(). This takes care of two misc BiteSized Tasks. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Isaac Lozano <109lozanoi@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+18
* FreeBSD build fixes (atomics, qapi/error.h) * x86 KVM fixes (SynIC, KVM_GET/SET_MSRS) * Memory API doc fix * checkpatch fix * Chardev and socket fixes * NBD fixes * exec.c SEGV fix # gpg: Signature made Tue 05 Apr 2016 10:47:49 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: net: fix missing include of qapi/error.h in netmap.c nbd: Fix poor debug message include/qemu/atomic: add compile time asserts cpus: don't use atomic_read for vm_clock_warp_start nbd: don't request FUA on FLUSH doc/memory: update MMIO section char: ensure all clients are in non-blocking mode char: fix broken EAGAIN retry on OS-X due to errno clobbering util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPED checkpatch: add target_ulong to typelist target-i386: assert that KVM_GET/SET_MSRS can set all requested MSRs target-i386: do not pass MSR_TSC_AUX to KVM ioctls if CPUID bit is not set memory: fix segv on qemu_ram_free(block=0x0) target-i386/kvm: Hyper-V VMBus hypercalls blank handlers update Linux headers to 4.6 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPEDDaniel P. Berrange1-1/+18
The FreeBSD header files define the AI_V4MAPPED but its implementation of getaddrinfo() always returns an error when that flag is set. eg address resolution failed for localhost:9000: Invalid value for ai_flags There are also reports of the same problem on OS-X 10.6 Since AI_V4MAPPED is not critical functionality, if we get an EAI_BADFLAGS error then just retry without the AI_V4MAPPED flag set. Use a static var to cache this status so we don't have to retry on every single call. Also remove its use from the test suite since it serves no useful purpose there. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-31log: move qemu_log_close/qemu_log_flush from header to log.cDenis V. Lunev1-0/+17
There is no particular reason to keep these functions in the header. Suggested by Paolo. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1458128212-4197-3-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell16-15/+162
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-23Merge remote-tracking branch 'remotes/armbru/tags/pull-ivshmem-2016-03-18' ↵Peter Maydell1-0/+6
into staging ivshmem: Fixes, cleanups, device model split # gpg: Signature made Mon 21 Mar 2016 20:33:54 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-ivshmem-2016-03-18: (40 commits) contrib/ivshmem-server: Print "not for production" warning ivshmem: Require master to have ID zero ivshmem: Drop ivshmem property x-memdev ivshmem: Clean up after the previous commit ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem ivshmem: Replace int role_val by OnOffAuto master qdev: New DEFINE_PROP_ON_OFF_AUTO ivshmem: Inline check_shm_size() into its only caller ivshmem: Simplify memory regions for BAR 2 (shared memory) ivshmem: Implement shm=... with a memory backend ivshmem: Tighten check of property "size" ivshmem: Simplify how we cope with short reads from server ivshmem: Drop the hackish test for UNIX domain chardev ivshmem: Rely on server sending the ID right after the version ivshmem: Propagate errors through ivshmem_recv_setup() ivshmem: Receive shared memory synchronously in realize() ivshmem: Plug leaks on unplug, fix peer disconnect ivshmem: Disentangle ivshmem_read() ivshmem: Simplify rejection of invalid peer ID from server ivshmem: Assert interrupts are set up once ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22qemu-log: support simple pid substitution for logsAlex Bennée1-2/+19
When debugging stuff that occurs over several forks it would be useful not to keep overwriting the one logfile you've set-up. This allows a simple %d to be included once in the logfile parameter which is substituted with getpid(). As the test cases involve checking user output they need g_test_trap_subprocess() support. As a result they are currently skipped on Travis builds due to the older glib involved. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Leandro Dorileo <l@dorileo.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-10-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22qemu-log: new option -dfilter to limit outputAlex Bennée1-0/+87
When debugging big programs or system emulation sometimes you want both the verbosity of cpu,exec et all but don't want to generate lots of logs for unneeded stuff. This patch adds a new option -dfilter which allows you to specify interesting address ranges in the form: -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,... Then logging code can use the new qemu_log_in_addr_range() function to decide if it will output logging information for the given range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22qemu-log: Avoid function call for disabled qemu_log_mask loggingPeter Maydell1-11/+0
Make qemu_log_mask() a macro which only calls the function to do the actual work if the logging is enabled. This avoids making a function call in possible fast paths where logging is disabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22qemu-log: correct help text for -d cpuAlex Bennée1-1/+1
This doesn't just dump CPU state on translation but on every block entrance. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-4-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa12-1/+47
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/iov.h: Don't include qemu-common.hMarkus Armbruster1-0/+1
qemu-common.h should only be included by .c files. Its file comment explains why: "No header file should depend on qemu-common.h, as this would easily lead to circular header dependencies." qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all that to qemu/iov.h and drop the ill-advised include. Include qemu/iov.h where the QEMUIOVector stuff is now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster7-0/+7
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Remove unneeded include statements for setjmp.hStefan Weil3-3/+0
As soon as setjmp.h is included from qemu/osdep.h, those old include statements are no longer needed. Add also setjmp.h to the list in scripts/clean-includes. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-03-21event_notifier: Make event_notifier_init_fd() #ifdef CONFIG_EVENTFDMarkus Armbruster1-0/+6
Event notifiers are designed for eventfd(2). They can fall back to pipes, but according to Paolo, event_notifier_init_fd() really requires the real thing, and should therefore be under #ifdef CONFIG_EVENTFD. Do that. Its only user is ivshmem, which is currently CONFIG_POSIX. Narrow it to CONFIG_EVENTFD. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake1-17/+18
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2024-09-03 17:12:10 +0000