aboutsummaryrefslogtreecommitdiff
path: root/ui
AgeCommit message (Collapse)AuthorFilesLines
2012-10-23vnc: drop QERR_VNC_SERVER_FAILEDPaolo Bonzini1-3/+0
We now always return "nice" error messages in errp when we goto fail. Drop the default error message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23vnc: add error propagation to vnc_display_openPaolo Bonzini1-19/+23
Before: $ qemu-system-x86_64 -vnc foo.bar:12345 getaddrinfo(foo.bar,18245): Name or service not known Failed to start VNC server on `foo.bar:12345' $ qemu-system-x86_64 -vnc localhost:12345,reverse=on inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused Failed to start VNC server on `localhost:12345,reverse=on' After: $ x86_64-softmmu/qemu-system-x86_64 -vnc foo.bar:12345 Failed to start VNC server on `foo.bar:12345': address resolution failed for foo.bar:18245: Name or service not known $ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:12345,reverse=on Failed to start VNC server on `localhost:12345,reverse=on': Failed to connect to socket: Connection refused Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23vnc: reorganize code for reverse modePaolo Bonzini1-11/+9
Avoid the dance between csock and vs->lsock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23vnc: introduce a single label for error returnsPaolo Bonzini1-25/+17
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23vnc: avoid Yoda conditionalsPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23qemu-sockets: add Error ** to all functionsPaolo Bonzini1-2/+2
This lets me adjust the clients to do proper error propagation first, thus avoiding temporary regressions in the quality of the error messages. Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-19ui/vnc-jobs.c: Fix minor typos in commentsPeter Maydell1-8/+8
Fix some minor typos/grammar errors in comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-19ui/vnc: Only report/use TIGHT_PNG encoding if enabled.Joel Martin1-0/+2
If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag then do not report to the client that it is supported. Also, since TIGHT_PNG is the same as the TIGHT encoding but with the filter/copy replaced with PNG data, adding it to the supported encodings list when it is disabled will cause the TIGHT encoding to be used even though the client requested TIGHT_PNG. Signed-off-by: Joel Martin <github@martintribe.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-12Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-0/+4
* stefanha/trivial-patches: vnc: fix "info vnc" with "-vnc ..., reverse=on" sheepdog: use bool for boolean variables configure: Tidy up remnants of non-64-bit physaddrs
2012-10-12vnc: fix "info vnc" with "-vnc ..., reverse=on"Paolo Bonzini1-0/+4
When reverse connection is in use, there is no active VNC server socket. Because of this, getsockopt(-1, ...) is attempted and the following error is emitted: $ socat TCP-LISTEN:5900,reuseaddr TCP-LISTEN:5901,reuseaddr & $ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio QEMU 1.2.50 monitor - type 'help' for more information (qemu) info vnc An undefined error has occurred Because however the host, family, service and auth fields are optional, we can just exit if there is no active server socket. $ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio QEMU 1.2.50 monitor - type 'help' for more information (qemu) info vnc Server: Client: address: 127.0.0.1:5900 x509_dname: none username: none Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-08spice: raise requirement to 0.12Gerd Hoffmann3-92/+2
With the next qemu version (1.3) we are going to bump the qxl device revision to 4. The new features available require a recent spice-server version, so raise up the bar. Otherwise we would end up with different qxl revisions depending on the spice-server version installed, which would be a major PITA when it comes to compat properties. Clear out a big bunch of #ifdefs which are not needed any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-06Merge branch 'trivial-patches' of git://github.com/stefanha/qemuAurelien Jarno2-2/+1
* 'trivial-patches' of git://github.com/stefanha/qemu: versatilepb: Use symbolic indices for ARM PIC qdev: kill bogus comment qemu-barrier: Fix compiler version check for future gcc versions hw: Add missing 'static' attribute for QEMUMachine cleanup useless return sentence qemu-sockets: Fix compiler warning (regression for MinGW) vnc: Fix spelling (hellmen -> hellman) in comment slirp: Fix spelling in comment (enought -> enough, insure -> ensure) tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code cpu: Add missing 'static' attribute to qemu_global_mutex configure: Support empty target list (--target-list=) hw: Fix return value check for bdrv_read, bdrv_write
2012-10-05cleanup useless return sentenceAmos Kong1-1/+0
This patch cleans up return sentences in the end of void functions. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05ui/vnc: simplify and avoid strncpyJim Meyering1-3/+1
Don't bother with strncpy. There's no need for its zero-fill. Use g_strndup in place of g_malloc+strncpy+NUL-terminate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05vnc: Fix spelling (hellmen -> hellman) in commentStefan Weil1-1/+1
The algorithm was named after Martin E. Hellman. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-25Separate inet_connect into inet_connect (blocking) and inet_nonblocking_connectOrit Wasserman1-1/+1
No need to add non blocking parameters to the blocking inet_connect add block parameter for inet_connect_opts instead of using QemuOpt "block". Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-17Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-1/+1
* stefanha/trivial-patches: configure: fix seccomp check arch_init.c: add missing '%' symbols before PRIu64 in debug printfs kvm: Fix warning from static code analysis qapi: Fix enumeration typo error console: Clean up bytes per pixel calculation Fix copy&paste typos in documentation comments linux-user: Remove #if 0'd cpu_get_real_ticks() definition ui: Fix spelling in comment (ressource -> resource) Spelling fixes in comments and macro names (ressource -> resource) Fix spelling (licenced -> licensed) in GPL Spelling fixes in comments and documentation srp: Don't use QEMU_PACKED for single elements of a structured type
2012-09-14ui: Fix spelling in comment (ressource -> resource)Stefan Weil1-1/+1
The function is called interface_release_resource. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-12spice: send updates only for changed screen contentGerd Hoffmann1-1/+55
when creating screen updates go compare the current guest screen against the mirror (which holds the most recent update sent), then only create updates for the screen areas which did actually change. [ v2: drop redundant qemu_spice_create_one_update call ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-12spice: add screen mirrorGerd Hoffmann2-10/+23
Create a screen mirror, keep there a copy of the most recent update passed on to spice-server. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-12spice: split qemu_spice_create_updateGerd Hoffmann1-13/+18
Creating one function which creates a single update for a given rectangle. And one (for now) pretty simple wrapper around it to queue up screen updates for the dirty region. [ v2: also update bounding box ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-12spice: switch to queue for vga mode updatesGerd Hoffmann2-12/+16
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: make number of surfaces runtime-configurable.Gerd Hoffmann2-3/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05qxl: add QXL_IO_MONITORS_CONFIG_ASYNCAlon Levy1-0/+1
Revision bumped to 4 for new IO support, enabled for spice-server >= 0.11.1. New io enabled if revision is 4. Revision can be set to 4. [ kraxel: 3 continues to be the default revision. Once we have a new stable spice-server release and the qemu patches to enable the new bits merged we'll go flip the switch and make rev4 the default ] This io calls the corresponding new spice api spice_qxl_monitors_config_async to let spice-server read a new guest set monitors config and notify the client. On migration reissue spice_qxl_monitors_config_async. RHBZ: 770842 Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> fixup Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: adding seamless-migration option to the command lineYonit Halperin1-0/+7
The seamless-migration flag is required in order to identify whether libvirt supports the new QEVENT_SPICE_MIGRATE_COMPLETED or not (by default the flag is off). New libvirt versions that wait for QEVENT_SPICE_MIGRATE_COMPLETED should turn on this flag. When this flag is off, spice fallbacks to its old migration method, which can result in data loss. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: add 'migrated' flag to spice infoYonit Halperin1-0/+4
The flag is 'true' when spice migration has completed on the src side. It is needed for a case where libvirt dies before migration completes and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED. When libvirt is restored and queries the migration status, it also needs to query spice and check if its migration has completed. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice migration: add QEVENT_SPICE_MIGRATE_COMPLETEDYonit Halperin1-1/+8
When migrating, libvirt queries the migration status, and upon migration completions, it closes the migration src. On the other hand, when migration is completed, spice transfers data from the src to destination via the client. This data is required for keeping the spice session after migration, without suffering from data loss and inconsistencies. In order to allow this data transfer, we add QEVENT for signaling libvirt that spice migration has completed, and libvirt needs to wait for this event before quitting the src process. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: notify on vm state change only via spice_server_vm_start/stopYonit Halperin3-4/+41
QXLWorker->start/stop are deprecated since spice-server 0.11.2 Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: notify spice server on vm start/stopYonit Halperin1-0/+14
Spice server needs to know about the vm state in order to prevent attempts to write to devices when they are stopped, mainly during the non-live stage of migration. Instead, spice will take care of restoring this writes, on the migration target side, after migration completes. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05spice: abort on invalid streaming cmdline paramsChristophe Fergeau1-1/+2
When parsing its command line parameters, spice aborts when it finds unexpected values, except for the 'streaming-video' option. This happens because the parsing of the parameters for this option is done using the 'name2enum' helper, which does not error out on unknown values. Using the 'parse_name' helper makes sure we error out in this case. Looking at git history, the use of 'name2enum' instead of 'parse_name' seems to have been an oversight, so let's change to that now. Fixes rhbz#831708 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-13net: inet_connect(), inet_connect_opts(): add in_progress argumentLuiz Capitulino1-1/+1
It's used to indicate the special case where a valid file-descriptor is returned (ie. success) but the connection can't be completed w/o blocking. This is needed because QERR_SOCKET_CONNECT_IN_PROGRESS is not treated like an error and a future commit will drop it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-03vnc: disable VNC password authentication (security type 2) when in FIPS modePaul Moore1-0/+10
FIPS 140-2 requires disabling certain ciphers, including DES, which is used by VNC to obscure passwords when they are sent over the network. The solution for FIPS users is to disable the use of VNC password auth when the host system is operating in FIPS compliance mode and the user has specified '-enable-fips' on the QEMU command line. This patch causes QEMU to emit a message to stderr when the host system is running in FIPS mode and a VNC password was specified on the commend line. If the system is not running in FIPS mode, or is running in FIPS mode but VNC password authentication was not requested, QEMU operates normally. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-28Avoid returning voidBlue Swirl2-2/+3
It's silly and non-conforming to standards to return void, don't do it. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-27Remove support for non-threaded VNC serverDaniel P. Berrange6-132/+1
QEMU now has a fundamental requirement for pthreads, so there is no compelling reason to retain support for the non-threaded VNC server. Remove the --{enable,disable}-vnc-thread configure arguments, and all CONFIG_VNC_THREAD conditionals Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-22ui/spice-display.c: add missing initialization for valgrindAlon Levy1-0/+2
We can't initialize QXLDevSurfaceCreate field by field because it has a pa hole, and so 4 bytes remain uninitialized when building on x86-64, so just memset. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07build: move ui/ objects to nested Makefile.objsPaolo Bonzini1-0/+18
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-30vnc: fix segfault in vnc_display_pw_expire()Gerd Hoffmann1-0/+4
NULL pointer dereference in case no vnc server is configured. Catch this and return -EINVAL like vnc_display_password() does. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29cocoa: Suppress Cocoa frontend for -qtestAndreas Färber1-1/+2
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-05-10sockets: use error class to pass listen errorAmos Kong1-1/+2
Add a new argument in inet_listen()/inet_listen_opts() to pass back listen error. Change nbd, qemu-char, vnc to use new interface. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-10sockets: change inet_connect() to support nonblock socketAmos Kong1-1/+1
Add a bool argument to inet_connect() to assign if set socket to block/nonblock, and delete original argument 'socktype' that is unused. Add a new argument to inet_connect()/inet_connect_opts(), to pass back connect error by error class. Retry to connect when -EINTR is got. Connect's successful for nonblock socket when following errors are got, user should wait for connecting by select(): -EINPROGRESS -EWOULDBLOCK (win32) -WSAEALREADY (win32) Change nbd, vnc to use new interface. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-03spice_info: add mouse_modeAlon Levy1-0/+7
Add mouse_mode, either server or mouse, to qmp and hmp commands, based on spice_server_is_server_mouse added in spice-server 0.10.3. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-07Replace Qemu by QEMU in commentsStefan Weil2-2/+2
The official spelling is QEMU. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> [blauwirbel@gmail.com: fixed comment style in hw/sun4m.c] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-22ui/spice-display: use uintptr_t when casting qxl physical addressesAlon Levy1-5/+5
The current intptr_t casts are a problem when the address's highest bit is 1, and it is cast to a intptr_t and then to uint64_t, such as at: surface.mem = (intptr_t)ssd->buf; This causes the sign bit to be extended which causes a wrong address to be passed on to spice, which then complains when it gets the wrong slot_id number, since the slot_id is taken from the higher bits. The assertion happens early - during the first primary surface creation. This fixes running "-vga qxl -spice" with 32 bit compiled qemu-system-i386. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-22ui/spice-display.c: Fix compilation warnings on 32 bit hostsPeter Maydell1-6/+6
Fix compilation failures ("cast from pointer to integer of different size [-Werror=pointer-to-int-cast]") by using uintptr_t instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori2-3/+5
* stefanha/trivial-patches: qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write() ioapic: fix build with DEBUG_IOAPIC .gitignore: add qemu-bridge-helper and option rom build products cleanup obsolete typedef monitor: Remove unused bool field 'qapi' in mon_cmd_t struct ds1338: Add missing break statement vnc: Fix packed boolean struct members Remove type field in ModuleEntry as it's not used
2012-03-19spice: fix broken initializationAlon Levy1-8/+1
Commit 1b71f7c14fab6f00c2680d4489fbee7baf796e4f moved MODULE_INIT_QOM to way before MODULE_INIT_MACHINE, thereby breaking assumptions made in spice-core.c which registered both a type initializer and a machine intializer. This fix removes the type registration, and replaces it with calling qemu_spice_init in vl.c after command line parsing (second pass) is done, and after timers are armed, required by spice server. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19qxl: switch qxl.c to trace-eventsAlon Levy1-2/+12
dprint is still used for qxl_init_common one time prints. also switched parts of spice-display.c over, mainly all the callbacks to spice server. All qxl device trace events start with the qxl device id. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19spice: set spice uuid and nameMarc-André Lureau1-0/+6
This allows a Spice client to identify a VM Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19vnc: Fix packed boolean struct membersStefan Weil2-3/+5
This patch fixes warnings reported by splint: For variables which are packed in a single bit, a signed data type like 'int' does not make much sense. There is no obvious reason why the two values should be packed, so I removed the packing and changed the data type to bool because both are used as boolean values. v2: Some versions of gcc complain after this modification, for example gcc (Debian 4.4.5-8) 4.4.5): ui/vnc-auth-sasl.c: In function ‘vnc_sasl_client_cleanup’: ui/vnc-auth-sasl.c:34: error: suggest parentheses around assignment used as truth value Obviously, the compiler does not like code which does bool = unsigned = bool = 0 Splitting that code in three statements works. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-14vnc: Limit r/w access to size of allocated memoryStefan Weil1-0/+3
This fixes memory reads and writes which exceeded the upper limit of allocated memory vd->guest.ds->data and vd->server->data. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>