aboutsummaryrefslogtreecommitdiff
path: root/ui/spice-input.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-16ui/spice-input: Remove superfluous forward declarationPhilippe Mathieu-Daudé1-1/+0
We only need to forward-declare kbd_push_key() and kbd_get_leds() which are used in kbd_interface, not kbd_leds(). Remove this superfluous forward declaration. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200909171145.350360-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-04ui: Add more mouse buttons to SPICEFrediano Ziglio1-0/+2
Add support for SIDE and EXTRA buttons. The constants for buttons in both SPICE and QEMU are defined as LEFT MIDDLE RIGHT UP DOWN SIDE EXTRA (same order). "button_mask" contains for each bit the state of a button. Qemu currently uses bits 0, 1, 2 respectively as LEFT, RIGHT, MIDDLE; also add bits 4 and 5 as UP and DOWN (using wheel movements). SPICE protocol uses a bitmask based on the order above where LEFT is bit 0, MIDDLE is bit 1 and so on till EXTRA being bit 6. To avoid clash with Qemu usage SPICE bitmask from SIDE are move a bit more resulting respectively in 0x40 and 0x80 values. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Message-id: 20200820145851.50846-1-fziglio@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2018-06-01ui: use local path for local headersMichael S. Tsirkin1-1/+1
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-07-28ui: correctly detect spice PAUSE scancode sequenceDaniel P. Berrange1-19/+13
The SPICE input code is currently detcting 0xe1 0x1d 0x45 as the PAUSE key make sequence and 0xe1 0x9d 0xc5 as the break sequence. This is incorrect, because all 6 scancodes together are the make sequence, and there is no break sequence. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170727174640.30359-1-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-27ps2: fix sending of PAUSE/BREAK scancodesDaniel P. Berrange1-0/+20
The processing of the scancodes for PAUSE/BREAK has been broken since the conversion to qcodes in: commit 8c10e0baf0260b59a4e984744462a18016662e3e Author: Hervé Poussineau <hpoussin@reactos.org> Date: Thu Sep 15 22:06:26 2016 +0200 ps2: use QEMU qcodes instead of scancodes When using a VNC client, with the raw scancode extension, the client will send a scancode of 0xc6 for both PAUSE and BREAK. There is mistakenly no entry in the qcode_to_number table for this scancode, so ps2_keyboard_event() just generates a log message and discards the scancode When using a SPICE client, it will also send 0xc6 for BREAK, but will send 0xe1 0x1d 0x45 0xe1 0x9d 0xc5 for PAUSE. There is no entry in the qcode_to_number table for the scancode 0xe1 because it is a special XT keyboard prefix not mapping to any QKeyCode. Again ps2_keyboard_event() just generates a log message and discards the scancode. The following 0x1d, 0x45, 0x9d, 0xc5 scancodes get handled correctly. Rather than trying to handle 3 byte sequences of scancodes in the PS/2 driver, special case the SPICE input code so that it captures the 3 byte pause sequence and turns it into a Pause QKeyCode. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170727113243.23991-1-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-06-14spice: Use proper enum type for kbd led stateJonathon Jongsma1-1/+1
Although the Qemu and spice flags currently have the same value, it seems more correct to pass the spice flag values to spice_server_kbd_leds(), especially considering that this function already makes an effort to convert between the QEMU_*_LED and SPICE_KEYBOARD_MODIFIER_* values. Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170510202006.31737-1-jjongsma@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-11ui: Support non-zero minimum values for absolute input axesPhilippe Voinov1-2/+2
This patch refactors ui/input.c to support absolute axis minimum values other than 0. All dependent calls to qemu_input_queue_abs have been updated to explicitly supply 0 as the axis minimum value. Signed-off-by: Philippe Voinov <philippevoinov@gmail.com> Message-id: 20170505133952.29885-1-philippevoinov@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-03-01qapi: rename input buttonsGerd Hoffmann1-2/+2
All lowercase, use-dash instead of CamelCase. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-04ui: Clean up includesPeter Maydell1-4/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
2015-12-17qapi: Change munging of CamelCase enum valuesEric Blake1-2/+2
When munging enum values, the fact that we were passing the entire prefix + value through camel_to_upper() meant that enum values spelled with CamelCase could be turned into CAMEL_CASE. However, this provides a potential collision (both OneTwo and One-Two would munge into ONE_TWO) for enum types, when the same two names are valid side-by-side as QAPI member names. By changing the generation of enum constants to always be prefix + '_' + c_name(value, False).upper(), and ensuring that there are no case collisions (in the next patches), we no longer have to worry about names that would be distinct as QAPI members but collide as variant tag names, without having to think about what munging the heuristics in camel_to_upper() will actually perform on an enum value. Making the change will affect enums that did not follow coding conventions, using 'CamelCase' rather than desired 'lower-case'. Thankfully, there are only two culprits: InputButton and ErrorClass. We already tweaked ErrorClass to make it an alias of QapiErrorClass, where only the alias needs changing rather than the whole tree. So the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part of this commit may later need reverting if we rename the enum constants from 'WheelUp' to 'wheel-up' as part of moving x-input-send-event to a stable interface; but at least we have documentation bread crumbs in place to remind us (commit 513e7cd), and it matches the fact that SDL constants are also spelled SDL_BUTTON_WHEELUP. Suggested by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake1-1/+1
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-03-24spice: input: Fix absolute mouse y coordinatesCole Robinson1-1/+1
Current tablet + spice is unusable. Regressed with the UI input rework. Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch spice ui to new coreGerd Hoffmann1-24/+38
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch spice ui to new coreGerd Hoffmann1-2/+20
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-19ui: move files to ui/ and include/ui/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-2/+2
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23notifier: Pass data argument to callbackJan Kiszka1-2/+2
This allows to pass additional information to the notifier callback which is useful if sender and receiver do not share any other distinct data structure. Will be used first for the clock reset notifier. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-09-21spice: add tablet supportGerd Hoffmann1-7/+87
Add support for the spice tablet interface. The tablet interface will be registered (and then used by the spice client) as soon as a absolute pointing device is available and used by the guest, i.e. you'll have to configure your guest with '-usbdevice tablet'.
2010-09-21spice: add mouseGerd Hoffmann1-0/+52
Open mouse channel. Now you can move the guests mouse pointer. No tablet / absolute positioning (yet) though.
2010-09-21spice: add keyboardGerd Hoffmann1-0/+85
Open keyboard channel. Now you can type into the spice client and the keyboard events are sent to your guest. You'll need some other display like vnc to actually see the guest responding to them though.
generated by cgit v1.1 at 2024-11-03 10:52:38 +0000