aboutsummaryrefslogtreecommitdiff
path: root/trace-events
AgeCommit message (Collapse)AuthorFilesLines
2012-03-12qcow2: Add some tracingKevin Wolf1-0/+24
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-02-27usb: add tracepoint for usb packet state changes.Gerd Hoffmann1-0/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-22jazz-led: use trace frameworkHervé Poussineau1-0/+4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-09qed: replace is_write with flags fieldStefan Hajnoczi1-1/+1
Per-request attributes like read/write are currently implemented as bool fields in the QEDAIOCB struct. This becomes unwiedly as the number of attributes grows. For example, the qed_aio_setup() function would have to take multiple bool arguments and at call sites it would be hard to distinguish the meaning of each bool. Instead use a flags field with bitmask constants. This will be used when zero write support is added. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09block: add .bdrv_co_write_zeroes() interfaceStefan Hajnoczi1-0/+1
The ability to zero regions of an image file is a useful primitive for higher-level features such as image streaming or zero write detection. Image formats may support an optimized metadata representation instead of writing zeroes into the image file. This allows zero writes to be potentially faster than regular write operations and also preserve sparseness of the image file. The .bdrv_co_write_zeroes() interface should be implemented by block drivers that wish to provide efficient zeroing. Note that this operation is different from the discard operation, which may leave the contents of the region indeterminate. That means discarded blocks are not guaranteed to contain zeroes and may contain junk data instead. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-30GRLIB UART: Add RX channelFabien Chouteau1-0/+1
This patch implements the RX channel of GRLIB UART with a FIFO to improve data rate. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-26virtio-blk: add virtio_blk_handle_read trace eventStefan Hajnoczi1-0/+1
There already exists a virtio_blk_handle_write trace event as well as completion events. Add the virtio_blk_handle_read event so it's easy to trace virtio-blk requests for both read and write operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi1-0/+1
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi1-0/+4
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: add image streaming block jobStefan Hajnoczi1-0/+4
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: make copy-on-read a per-request flagStefan Hajnoczi1-1/+2
Previously copy-on-read could only be enabled for all requests to a block device. This means requests coming from the guest as well as QEMU's internal requests would perform copy-on-read when enabled. For image streaming we want to support finer-grained behavior than just populating the image file from its backing image. Image streaming supports partial streaming where a common backing image is preserved. In this case guest requests should not perform copy-on-read because they would indiscriminately copy data which should be left in a backing image from the backing chain. Introduce a per-request flag for copy-on-read so that a block device can process both regular and copy-on-read requests. Overlapping reads and writes still need to be serialized for correctness when copy-on-read is happening, so add an in-flight reference count to track this. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-23Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori1-1/+1
* qemu-kvm/uq/master: kvm: Activate in-kernel irqchip support kvm: x86: Add user space part for in-kernel IOAPIC kvm: x86: Add user space part for in-kernel i8259 kvm: x86: Add user space part for in-kernel APIC kvm: x86: Establish IRQ0 override control kvm: Introduce core services for in-kernel irqchip support memory: Introduce memory_region_init_reservation ioapic: Factor out base class for KVM reuse ioapic: Drop post-load irr initialization i8259: Factor out base class for KVM reuse i8259: Completely privatize PicState apic: Open-code timer save/restore apic: Factor out base class for KVM reuse apic: Introduce apic_report_irq_delivered apic: Inject external NMI events via LINT1 apic: Stop timer on reset kvm: Move kvmclock into hw/kvm folder msi: Generalize msix_supported to msi_supported hyper-v: initialize Hyper-V CPUID leaves. hyper-v: introduce Hyper-V support infrastructure. Conflicts: Makefile.target Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-19apic: Introduce apic_report_irq_deliveredJan Kiszka1-1/+1
The in-kernel i8259 and IOAPIC backends for KVM will need this, so encapsulate the shared bits. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-13usb: track altsetting in USBDeviceGerd Hoffmann1-0/+1
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-03Merge remote-tracking branch 'qemu-kvm/memory/page_desc' into stagingAnthony Liguori1-1/+1
* qemu-kvm/memory/page_desc: (22 commits) Remove cpu_get_physical_page_desc() sparc: avoid cpu_get_physical_page_desc() virtio-balloon: avoid cpu_get_physical_page_desc() vhost: avoid cpu_get_physical_page_desc() kvm: avoid cpu_get_physical_page_desc() memory: remove CPUPhysMemoryClient xen: convert to MemoryListener API memory: temporarily add memory_region_get_ram_addr() xen, vga: add API for registering the framebuffer vhost: convert to MemoryListener API kvm: convert to MemoryListener API kvm: switch kvm slots to use host virtual address instead of ram_addr_t memory: add API for observing updates to the physical memory map memory: replace cpu_physical_sync_dirty_bitmap() with a memory API framebuffer: drop use of cpu_physical_sync_dirty_bitmap() loader: remove calls to cpu_get_physical_page_desc() framebuffer: drop use of cpu_get_physical_page_desc() memory: introduce memory_region_find() memory: add memory_region_is_logging() memory: add memory_region_is_rom() ...
2012-01-03xen: convert to MemoryListener APIAvi Kivity1-1/+1
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-21hw/9pfs: Use the correct signed type for different variablesAneesh Kumar K.V1-4/+4
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-12-15block: bdrv_aio_* do not return NULLPaolo Bonzini1-2/+0
Initially done with the following semantic patch: @ rule1 @ expression E; statement S; @@ E = ( bdrv_aio_readv | bdrv_aio_writev | bdrv_aio_flush | bdrv_aio_discard | bdrv_aio_ioctl ) (...); ( - if (E == NULL) { ... } | - if (E) { <... S ...> } ) which however missed the occurrence in block/blkverify.c (as it should have done), and left behind some unused variables. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05dma-helpers: Add trace eventsKevin Wolf1-0/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05block: core copy-on-read logicStefan Hajnoczi1-0/+1
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-31Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-0/+7
Conflicts: block/vmdk.c
2011-10-30hw/9pfs: Make VirtFS tracing work correctlyAneesh Kumar K.V1-1/+1
this patch fix multiple issues with VirtFS tracing. a) Add tracepoint to the correct code path. We handle error in complete_pdu b) Fix indentation in python script c) Fix variable naming issue in python script Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-28scsi: do not call transfer_data after canceling a requestPaolo Bonzini1-0/+1
Otherwise, if cancellation is "faked" by the AIO layer and goes through qemu_aio_flush, the whole request is completed synchronously during scsi_req_cancel. Using the enqueued flag would work here, but not in the next patches, so I'm introducing a new io_canceled flag. That's because scsi_req_data is a synchronous callback and the enqueued flag might be reset by the time it returns. scsi-disk cannot unref the request until after calling scsi_req_data. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28iSCSI block driverRonnie Sahlberg1-0/+6
This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-26Sparc: convert win_helper to trace frameworkBlue Swirl1-0/+8
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert interrupt helpers to trace frameworkBlue Swirl1-0/+7
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert mmu_helper to trace frameworkBlue Swirl1-0/+10
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-21block: add bdrv_co_discard and bdrv_aio_discard supportPaolo Bonzini1-0/+1
This similarly adds support for coroutine and asynchronous discard. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-20hw/9pfs: Fix broken compilation caused by wrong trace eventsStefan Weil1-4/+4
Commit c572f23a3e7180dbeab5e86583e43ea2afed6271 added trace events with mismatching format string and arguments. gcc reports these errors: In file included from trace.c:2:0: trace.h: In function ‘trace_v9fs_attach’: trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args] trace.h: In function ‘trace_v9fs_wstat’: trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args] trace.h: In function ‘trace_v9fs_mkdir’: trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args] trace.h: In function ‘trace_v9fs_mkdir_return’: trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args] Fix the format strings and also use %u instead of %d for unsigned values in the changed strings. There are more minor errors of this kind which I did not fix because that would make the review more difficult. v2: Fixed position of } for v9fs_mkdir_return. Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20Merge remote-tracking branch 'aneesh/for-upstream-6' into stagingAnthony Liguori1-0/+46
Conflicts: trace-events
2011-10-16hw: add OpenCores 10/100 Mbps Ethernet controllerMax Filippov1-0/+14
This is OpenCores Ethernet MAC + subset of National Semiconductors DP83838C PHY. OpenCores Ethernet MAC project: http://opencores.org/project,ethmac Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15hw/9pfs: Introduce tracing for 9p pdu handlersHarsh Prateek Bora1-0/+46
Plan is to replace the existing debug infrastructure with Qemu tracing infrastructure so that user can dynamically enable/disable trace events and therefore a meaningful trace log can be generated which can be further filtered using an analysis script. Note: Because of current simpletrace limitations, the trace events are logging at max 6 args, however, once the more args are supported, we can change trace events to log more info as well. Also, This initial patch only provides a replacement for existing debug infra. More trace events to be added later for newly added handlers and sub-routines. Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-08Merge branch 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32Blue Swirl1-2/+2
* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32: milkymist: new interrupt map milkymist_uart: support new core version lm32: add missing qemu_init_vcpu() call
2011-10-03milkymist_uart: support new core versionMichael Walle1-2/+2
The new version of the uart core introduces status and control bits. Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-03trace: add arguments to bdrv_co_io_em() trace eventStefan Hajnoczi1-1/+1
It is useful to know the BlockDriverState as well as the sector_num/nb_sectors of an emulated .bdrv_co_*() request. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03trace: trace monitor qmp dispatch/completionStefan Hajnoczi1-0/+4
Add trace events for handle_qmp_command(), which dispatches qmp commands, and monitor_protocol_emitter(), which produces the reply to a qmp command. Also remove duplicate #include "trace/control.h". Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03trace: trace bdrv_open_common()Stefan Hajnoczi1-0/+1
bdrv_open_common() is a useful point to trace since it reveals the filename and block driver for a given BlockDriverState. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-01ESP: convert to trace frameworkBlue Swirl1-0/+31
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-21fix compilation with stderr trace backendPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-17trace: add virtio_set_status() trace eventStefan Hajnoczi1-0/+1
The virtio device lifecycle can be observed by looking at the sequence of set status operations. This is especially important for catching the reset operation (status value 0), which resets the device and all virtqueues. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17trace: remove trailing double quotes after PRI*64Stefan Hajnoczi1-17/+17
Now that format strings can end in a PRI*64 macro, remove the workarounds from the trace-events file. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17trace: remove newline from grlib_irqmp_check_irqs format stringStefan Hajnoczi1-1/+1
There is no need to put a newline in trace event format strings. The backend may use the format string within some context and takes care of how to display the event. The stderr backend automatically appends "\n" whereas the ust backend does not want a newline at all. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster1-1/+1
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-10mipsnet: use trace frameworkHervé Poussineau1-0/+7
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-07usb: claim port at device initialization time.Gerd Hoffmann1-0/+6
This patch makes qemu assign a port when creating the device, not when attaching it. For most usb devices this isn't a noticable difference because they are in attached state all the time. The change affects usb-host devices which live in detached state while the real device is unplugged from the host. They have a fixed port assigned all the time now instead of getting grabbing one on attach and releasing it at detach, i.e. they stop floating around at the usb bus. The change also allows to simplify usb-hub. It doesn't need the handle_attach() callback any more to configure the downstream ports. This can be done at device initialitation time now. The changed initialization order (first grab upstream port, then register downstream ports) also fixes some icky corner cases. For example it is not possible any more to plug the hub into one of its own downstream ports. The usb host adapters must care too. USBPort->dev being non-NULL doesn't imply any more the device is in attached state. The host adapters must additionally check the USBPort->dev->attached flag. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-ehci: handle siTDsGerd Hoffmann1-0/+1
This patch adds code to do minimal siTD handling, which is basically just following the next pointer. This is good enougth to handle the inactive siTDs used by FreeBSD. Active siTDs are skipped too as we don't have split transfer support in qemu, additionally a warning is printed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: claim portGerd Hoffmann1-0/+1
When configured to pass through a specific host port (using hostbus and hostport properties), try to claim the port if supported by the kernel. That will avoid any kernel drivers binding to devices plugged into that port. It will not stop any userspace apps (such as usb_modeswitch) access the device via usbfs though. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: start tracing supportGerd Hoffmann1-0/+24
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in favor of the trace points. Also cleanup error reporting a bit while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-02rename qemu_malloc and related to glib names for coherenceFrediano Ziglio1-4/+4
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01trace: enable all eventsLluís1-324/+324
Given that all events with programmatically-controlled state are disabled by default, we can delete the "disable" property from all events. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
generated by cgit v1.1 at 2024-12-25 15:30:46 +0000