aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell5-75/+159
pci, pc, virtio: features, fixes reconnect for vhost blk tests for UEFI misc other stuff Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 21 May 2019 14:41:32 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (34 commits) tests: acpi: print error unable to dump ACPI table during rebuild tests: acpi: refactor rebuild-expected-aml.sh to dump ACPI tables for a specified list of targets tests: acpi: allow to override default accelerator tests: acpi: ignore SMBIOS tests when UEFI firmware is used tests: acpi: add a way to start tests with UEFI firmware tests: acpi: add acpi_find_rsdp_address_uefi() helper tests: acpi: move boot_sector_init() into x86 tests branch tests: acpi: skip FACS table if board uses hw reduced ACPI profile tests: acpi: fetch X_DSDT if pointer to DSDT is 0 tests: acpi: make pointer to RSDP 64bit tests: acpi: make RSDT test routine handle XSDT tests: acpi: make acpi_fetch_table() take size of fetched table pointer tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table() pci: Simplify pci_bus_is_root() pcie: Remove redundant test in pcie_mmcfg_data_{read,write}() libvhost-user: fix bad vu_log_write hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg() i386, acpi: remove mcfg_ prefix in AcpiMcfgInfo members hw/arm/virt-acpi-build: remove unnecessary variable mcfg_start do not call vhost_net_cleanup() on running net from char user event ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-21tests: acpi: print error unable to dump ACPI table during rebuildIgor Mammedov1-1/+4
Instead of just asserting print the error that lead to assert first. While at it move assert into rebuild branch, which removes redundant check done in case of !rebuild branch is taken (the later is taken care of by g_assert_no_error). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556808723-226478-16-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-21tests: acpi: refactor rebuild-expected-aml.sh to dump ACPI tables for a ↵Igor Mammedov1-12/+11
specified list of targets Make initial list contain x86_64. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556808723-226478-15-git-send-email-imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-21Merge remote-tracking branch ↵Peter Maydell116-369/+192
'remotes/huth-gitlab/tags/pull-request-2019-05-21' into staging - qtest patches to get rid of the global_qtest variable in more tests - some iotests patches that have multiple reviews and thus are ready to go # gpg: Signature made Tue 21 May 2019 11:40:31 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-05-21: tests/qemu-iotests: Remove the "_supported_os Linux" line from many tests cirrus / travis: Add gnu-sed and bash for macOS and FreeBSD tests/qemu-iotests: Do not hard-code the path to bash tests/qemu-iotests/check: Pick a default machine if necessary tests/qemu-iotests/005: Add a sanity check for large sparse file support tests/hd-geo-test: Use qtest_init() instead of qtest_start() tests/device-introspect: Use qtest_init() instead of qtest_start() tests/qom-test: Use qtest_init() instead of qtest_start() tests/numa-test: Use qtest_init() instead of qtest_start() tests/q35-test: Make test independent of global_qtest tests/libqos: Get rid of global_qtest dependency in qvring_init() tests/libqtest: Fix description of qtest_vinitf() and qtest_initf() tests/libqtest: Remove unused global_qtest-related wrapper functions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-21Merge remote-tracking branch 'remotes/xtensa/tags/20190520-xtensa' into stagingPeter Maydell1-0/+48
target/xtensa: SR reorganization and options for modern cores Reorganize special register handling to support configurations with conflicting SR definitions. Implement options used by the modern xtensa cores: - memory protection unit; - block prefetch; - exclusive access Add special register definitions and IRQ types for ECC/parity, gather/scatter and IDMA. # gpg: Signature made Mon 20 May 2019 18:53:05 BST # gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044 # gpg: issuer "jcmvbkbc@gmail.com" # gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown] # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full] # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full] # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20190520-xtensa: target/xtensa: implement exclusive access option target/xtensa: update list of exception causes target/xtensa: implement block prefetch option opcodes target/xtensa: implement DIWBUI.P opcode target/xtensa: implement MPU option target/xtensa: add parity/ECC option SRs target/xtensa: define IDMA and gather/scatter IRQ types target/xtensa: make internal MMU functions static target/xtensa: get rid of centralized SR properties Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-21tests/qemu-iotests: Remove the "_supported_os Linux" line from many testsThomas Huth99-99/+0
A lot of tests run fine on FreeBSD and macOS, too - the limitation to Linux here was likely just copied-and-pasted from other tests. Thus remove the "_supported_os Linux" line from tests that run successful in our CI pipelines on FreeBSD and macOS. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190502084506.8009-6-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/qemu-iotests: Do not hard-code the path to bashThomas Huth5-5/+5
bash is installed in a different directory on non-Linux systems like FreeBSD. Do not hard-code /bin/bash here so that the tests can run there, too. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190502084506.8009-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/qemu-iotests/check: Pick a default machine if necessaryThomas Huth1-1/+12
qemu-system-arm, qemu-system-aarch64 and qemu-system-tricore do not have a default machine, so when running the qemu-iotests with such a binary, lots of tests are failing. Fix it by picking a default machine in the "check" script instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190502084506.8009-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/qemu-iotests/005: Add a sanity check for large sparse file supportThomas Huth1-0/+9
"check -raw 005" fails when running on certain filesystems - these do not support such large sparse files. Use the same check as in test 220 to skip the test in this case. Suggested-by: Eric Blake <eblake@redhat.com> Message-Id: <20190502084506.8009-2-thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/hd-geo-test: Use qtest_init() instead of qtest_start()Thomas Huth1-35/+41
qtest_start() + qtest_end() should be avoided, since they use the global_qtest variable that we want to get rid of in the long run. Use qtest_init() and qtest_quit() instead. Message-Id: <20190515174328.16361-7-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/device-introspect: Use qtest_init() instead of qtest_start()Thomas Huth1-39/+46
qtest_start() + qtest_end() should be avoided, since they use the global_qtest variable that we want to get rid of in the long run. Use qtest_init() and qtest_quit() instead. Message-Id: <20190515174328.16361-6-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/qom-test: Use qtest_init() instead of qtest_start()Thomas Huth1-15/+13
qtest_start() + qtest_end() should be avoided, since they use the global_qtest variable that we want to get rid of in the long run. Use qtest_init() and qtest_quit() instead. Message-Id: <20190515174328.16361-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/numa-test: Use qtest_init() instead of qtest_start()Thomas Huth1-23/+30
qtest_start() + qtest_end() should be avoided, since they use the global_qtest variable that we want to get rid of in the long run. Use qtest_init() and qtest_quit() instead. Message-Id: <20190515174328.16361-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/q35-test: Make test independent of global_qtestThomas Huth1-21/+18
Use a local QTestState variable, so that we can finally get rid of the undesired global_qtest variable in this file, too. Message-Id: <20190515174328.16361-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/libqos: Get rid of global_qtest dependency in qvring_init()Thomas Huth4-11/+15
Library functions should not depend on global_qtest functions like writew() and writeq(), so that they can also be used in tests that deal with multiple QTestStates at the same time (like migration tests). Message-Id: <20190515174328.16361-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/libqtest: Fix description of qtest_vinitf() and qtest_initf()Thomas Huth1-2/+2
These functions are convenience wrappers of qtest_init() and not of qtest_start(). Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190513154759.24973-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21tests/libqtest: Remove unused global_qtest-related wrapper functionsThomas Huth2-118/+1
A bunch of the wrapper functions that use global_qtest are not used anymore. Remove them to avoid that they are used in new code again. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190510052239.21947-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-20tests: acpi: allow to override default acceleratorIgor Mammedov1-3/+5
By default test cases were run with 'kvm:tcg' accelerators to speed up tests execution. While it works for x86, were change of accelerator doesn't affect ACPI tables, the approach doesn't works for ARM usecase though. In arm/virt case, KVM mode requires using 'host' cpu model, which isn't available in TCG mode. That could be worked around with 'max' cpu model, which works both for KVM and TCG. However in KVM mode it is necessary to specify matching GIC version, which also could use 'max' value to automatically pick GIC version suitable for host's CPU. Depending on host cpu type, different GIC versions would be used, which in turn leads to different ACPI tables (APIC) generated. As result while comparing with reference blobs, test would fail if host's GIC version won't match the version on the host where reference blobs where generated. Let's keep testing simple for now and allow ARM tests run in TCG only mode. To do so introduce 'accel' parameter in test configuration, so test case could override default "kvm:tcg" with accelerator of choice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1556808723-226478-12-git-send-email-imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: ignore SMBIOS tests when UEFI firmware is usedIgor Mammedov1-2/+9
once FW provides a pointer to SMBIOS entry point like it does for RSDP it should be possible to enable this one the same way. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1556808723-226478-11-git-send-email-imammedo@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: add a way to start tests with UEFI firmwareIgor Mammedov1-17/+35
For testcase to use UEFI firmware, one needs to provide and specify firmware and varstore blob names in test_data { uefi_fl1, uefi_fl2 } fields respectively and RAM start address plus size where to look for test structure signature. Additionally testcase should specify bootable cdrom image from uefi-boot-images with EFI test utility. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1556808723-226478-10-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: add acpi_find_rsdp_address_uefi() helperIgor Mammedov2-0/+46
introduce UEFI specific counterpart to acpi_find_rsdp_address() that will help to find RSDP address when [OA]VMF is used as firmware. It requires guest firmware or other guest app to place 1Mb aligned UefiTestSupport structure (defined in this patch) in RAM with UefiTestSupport::signature_guid set to AB87A6B1-2034-BDA0-71BD-375007757785 For test app details see commit (09a274d82f tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <1556808723-226478-9-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: move boot_sector_init() into x86 tests branchIgor Mammedov1-4/+5
boot_sector_init() won't be used by arm/virt board, so move it from global scope to x86 branch that uses it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556808723-226478-8-git-send-email-imammedo@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: skip FACS table if board uses hw reduced ACPI profileIgor Mammedov1-3/+7
If FADT has HW_REDUCED_ACPI flag set, do not attempt to fetch FACS as it's not provided by the board. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <1556808723-226478-7-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: fetch X_DSDT if pointer to DSDT is 0Igor Mammedov1-1/+10
that way it would be possible to test a DSDT pointed by 64bit X_DSDT field in FADT. PS: it will allow to enable testing arm/virt board, which sets only newer X_DSDT field. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1556808723-226478-6-git-send-email-imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: make pointer to RSDP 64bitIgor Mammedov3-8/+6
In case of UEFI, RSDP doesn't have to be located in lowmem, it could be placed at any address. Make sure that test won't break if it is placed above the first 4Gb of address space. PS: While at it cleanup some local variables as we don't really need them. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556808723-226478-5-git-send-email-imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: make RSDT test routine handle XSDTIgor Mammedov3-19/+14
If RSDP revision is more than 0 fetch table pointed by XSDT and fallback to legacy RSDT table otherwise. While at it drop unused acpi_get_xsdt_address(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1556808723-226478-4-git-send-email-imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: make acpi_fetch_table() take size of fetched table pointerIgor Mammedov4-11/+13
Currently acpi_fetch_table() assumes 32 bit size of table pointer in ACPI tables. However X_foo variants are 64 bit, prepare acpi_fetch_table() to handle both by adding an argument for addr_ptr pointed entry size. Follow up commits will use that to read XSDT and X_foo entries in ACPI tables. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1556808723-226478-3-git-send-email-imammedo@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table()Igor Mammedov4-4/+4
so name would reflect what the function does Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <1556808723-226478-2-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20iotests: Make 245 faster and more reliableMax Reitz2-8/+26
Sometimes, 245 fails for me because some stream job has already finished while the test expects it to still be active. (With -c none, it fails basically every time.) The most reliable way to fix this is to simply set auto_finalize=false so the job will remain in the block graph as long as we need it. This allows us to drop the rate limiting, too, which makes the test faster. The only problem with this is that there is a single place that yields a different error message depending on whether the stream job is still copying data (so COR is enabled) or not (COR has been disabled, but the job still has the WRITE_UNCHANGED permission on the target node). We can easily address that by expecting either error message. Note that we do not need auto_finalize=false (or rate limiting) for the active commit job, because It never completes without an explicit block-job-complete anyway. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20iotests.py: Fix VM.run_jobMax Reitz1-1/+1
log() is in the current module, there is no need to prefix it. In fact, doing so may make VM.run_job() unusable in tests that never use iotests.log() themselves. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20iotests.py: Let assert_qmp() accept an arrayMax Reitz1-2/+16
Sometimes we cannot tell which error message qemu will emit, and we do not care. With this change, we can then just pass an array of all possible messages to assert_qmp() and it will choose the right one. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20iotests: Test unaligned raw images with O_DIRECTMax Reitz4-0/+103
We already have 221 for accesses through the page cache, but it is better to create a new file for O_DIRECT instead of integrating those test cases into 221. This way, we can make use of _supported_cache_modes (and _default_cache_mode) so the test is automatically skipped on filesystems that do not support O_DIRECT. As part of the split, add _supported_cache_modes to 221. With that, it no longer fails when run with -c none or -c directsync. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20test-block-iothread: Test AioContext propagation for block jobsKevin Wolf1-0/+71
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20test-block-iothread: Test AioContext propagation through the treeKevin Wolf1-0/+131
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20iotest: fix 169: do not run qmp_cont in RUN_STATE_FINISH_MIGRATEVladimir Sementsov-Ogievskiy1-1/+6
qmp_cont fails if vm in RUN_STATE_FINISH_MIGRATE, so let's wait for final RUN_STATE_POSTMIGRATE. Also, while being here, check qmp_cont result. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-17build: don't build hardware objects with linux-userLaurent Vivier1-45/+45
Some objects are only needed for system emulation and tools. We can ignore them for the user mode case Update tests to run accordingly: conditionally build some tests on CONFIG_BLOCK. Some tests use components that are only built when softmmu or block tools are enabled, not for linux-user. So, if these components are not available, disable the tests. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190401141222.30034-6-lvivier@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
2019-05-17build: replace GENERATED_FILES by generated-files-yLaurent Vivier1-13/+13
When possible use generated-files-$(FLAG) to disable some targets (like KEYCODEMAP_FILES). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
2019-05-15target/xtensa: implement exclusive access optionMax Filippov1-0/+48
The Exclusive Instructions provide a general-purpose mechanism for atomic updates of memory-based synchronization variables that can be used for exclusion algorithms. Use cmpxchg-based implementation that is sufficient for the typical use of exclusive access in atomic operations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-13Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-05-13' into ↵Peter Maydell8-16/+13
staging Miscellaneous patches for 2019-05-13 # gpg: Signature made Mon 13 May 2019 08:04:02 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2019-05-13: Clean up decorations and whitespace around header guards Normalize header guard symbol definition. Clean up ill-advised or unusual header guards Clean up header guards that don't match their file name target/xtensa: Clean up core-isa.h header guards linux-user/nios2 linux-user/riscv: Clean up header guards authz: Normalize #include "authz/trace.h" to "trace.h" Use #include "..." for our own headers, <...> for others Clean up includes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13Clean up decorations and whitespace around header guardsMarkus Armbruster2-2/+2
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-9-armbru@redhat.com>
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster2-4/+4
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster2-5/+6
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13Clean up includesMarkus Armbruster2-5/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the changes to the following files manually reverted: contrib/libvhost-user/libvhost-user-glib.h contrib/libvhost-user/libvhost-user.c contrib/libvhost-user/libvhost-user.h linux-user/mips64/cpu_loop.c linux-user/mips64/signal.c linux-user/sparc64/cpu_loop.c linux-user/sparc64/signal.c linux-user/x86_64/cpu_loop.c linux-user/x86_64/signal.c slirp/src/* target/s390x/gen-features.c tests/fp/platform.h tests/migration/s390x/a-b-bios.c tests/test-rcu-simpleq.c tests/test-rcu-tailq.c tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c We're in the process of spinning out slirp/. tests/fp/platform.h is has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and tests/fp/berkeley-testfloat-3/ don't. tests/uefi-test-tools/ is guest software. The remaining reverts are the same as in commit b7d89466dde. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190313162812.8885-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Revert change to tests/fp/platform.h, adjust commit message]
2019-05-10iotests: Add test for rebase without input baseMax Reitz3-0/+164
This patch adds a test for rebasing an image that currently does not have a backing file. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10test-block-iothread: Job coroutine thread after AioContext switchKevin Wolf1-0/+107
This tests that a job coroutine always runs in the right iothread after the AioContext of its main node has changed. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10qemu-iotests: Fix cleanup for 192Kevin Wolf1-1/+3
Test case 192 calls _launch_qemu, so it also needs to _cleanup_qemu when it's done, otherwise the QMP FIFOs stay around in scratch/. It also creates a temporary NBD socket that needs to be removed as well at the end of the test case. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com>
2019-05-09Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-05-07' ↵Peter Maydell8-26/+35
into staging Block patches: - Fixes to qcow2's implementation of qemu-img check - Our SSH driver now supports bdrv_refresh_filename() - Miscellaneous fixes # gpg: Signature made Tue 07 May 2019 16:16:58 BST # gpg: using RSA key F407DB0061D5CF40 # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-05-07: iotests: Fix iotests 110 and 126 commit: Use bdrv_append() in commit_start() block: Assert that drv->bdrv_child_perm is set in bdrv_child_perm() block/ssh: Implement .bdrv_dirname() block/ssh: Implement .bdrv_refresh_filename() qcow2: discard bitmap when removed qcow2-refcount: don't mask corruptions under internal errors qcow2-refcount: check_refcounts_l2: don't count fixed cluster as allocated qcow2-refcount: check_refcounts_l2: reduce ignored overlaps qcow2-refcount: avoid eating RAM qcow2-refcount: fix check_oflag_copied Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-09Merge remote-tracking branch ↵Peter Maydell15-237/+269
'remotes/huth-gitlab/tags/pull-request-2019-05-09' into staging - Fix "make check" problem that occurred with LANG=C and Python 3.5 / 3.6 - Get rid of some more dependencies on the global_qtest variable in the qtests - Some other small test clean-ups - Some copyright statement clarifications - Mark TARGET_FMT_lu as poisoned # gpg: Signature made Thu 09 May 2019 08:45:47 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-05-09: include/exec/poison: Mark TARGET_FMT_lu as poisoned, too target/sh4: Fix LGPL information in the file headers target/openrisc: Fix LGPL information in the file headers hw/i2c/smbus_ich9: Fix the confusing contributions-after-2012 statement tests: qpci_unplug_acpi_device_test() should not rely on global_qtest tests/drive_del-test: Use qtest_init() instead of qtest_start() tests/Makefile: Remove unused test-obj-y variable tests/tpm-tests: Use g_test_skip() to mark skipped tests tests/ide-test: Make test independent of global_qtest tests/test-hmp: Use qtest_init() instead of qtest_start() tests/qmp-cmd-test: Use qtest_init() instead of qtest_start() tests/megasas: Make test independent of global_qtest tests/tco: Make test independent of global_qtest tests: Force Python I/O encoding for check-qapi-schema Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-08tests: qpci_unplug_acpi_device_test() should not rely on global_qtestThomas Huth7-13/+24
libqos functions should not use functions that require global_qtest to be set, since such library functions could also be used by tests that deal with multiple test states. Add a parameter to this function to explicitly specify the test state. Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190508143209.24350-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-08tests/drive_del-test: Use qtest_init() instead of qtest_start()Thomas Huth1-31/+32
qtest_start() + qtest_end() should be avoided, since they use the global_qtest variable that we want to get rid of in the long run Use qtest_init() and qtest_quit() instead. Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190508142153.21555-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2024-11-01 14:58:32 +0000