aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2017-09-29docker: Don't mount ccache db if NOUSER=1Fam Zheng1-2/+4
With NOUSER=1 the container runs code as root, which may create privileged files that will not be be accssible next time. Skip ccache dir mount in this case. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170925075458.18047-1-famz@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-09-29docker: test-block: Don't continue if build failsFam Zheng1-1/+1
Report error and exit upon compiling error, otherwise the iotests output will be pure noise. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170926110134.2786-1-famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-29tests/docker/run: don't source /etc/profileAlex Bennée1-1/+0
The usual behaviour of /etc/profile is to set the default PATH for users. This runs into problems when we have updated PATH in our dockerfile e.g. to access a cross-compiler in a non-standard location. It shouldn't be needed anyway as we inherit the env from the image when it was setup. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170926133622.14991-1-alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-29docker: Fix test-mingwFam Zheng1-0/+3
Feature "dtc" is explicitly required by test-mingw, but is not detected by the run script since we switched to archive-source.sh in b7f404201e4. Since it isn't available in the Fedora image which runs this test on patchew, the way we get dtc is still from submodule. archive-source.sh takes care of bundling the submodule files already, so what we need to do is just checking if files are there. Makefile is chosen because it is one that is unlikely to get renamed in the future. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170925082913.22089-1-famz@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-29docker: add installation to build testsPaolo Bonzini14-4/+21
Basic test that "make install" works; this requires msgfmt so add gettext to the packages. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1506095371-23160-1-git-send-email-pbonzini@redhat.com> [Rebase to master. - Fam] Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-27Merge remote-tracking branch ↵Peter Maydell1-4/+9
'remotes/dgilbert/tags/pull-migration-20170927a' into staging Migration pull 2017-09-27 # gpg: Signature made Wed 27 Sep 2017 14:56:23 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170927a: migration: Route more error paths migration: Route errors up through vmstate_save migration: wire vmstate_save_state errors up to vmstate_subsection_save migration: Check field save returns migration: check pre_save return in vmstate_save_state migration: pre_save return int migration: disable auto-converge during bulk block migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell21-20/+399
Block layer patches # gpg: Signature made Tue 26 Sep 2017 14:52:32 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (24 commits) block/qcow2-bitmap: fix use of uninitialized pointer qemu-iotests: add shrinking image test qcow2: add shrink image support qcow2: add qcow2_cache_discard qemu-img: add --shrink flag for resize iotests: fix 181: enable postcopy-ram capability on target qemu-iotests: Test change-backing-file command block: Fix permissions after bdrv_reopen() block: reopen: Queue children after their parents block: Base permissions on rw state after reopen block: Add reopen queue to bdrv_check_perm() block: Add reopen_queue to bdrv_child_perm() qemu-io: Drop write permissions before read-only reopen block: Clean up some bad code in the vvfat driver block/throttle-groups.c: allocate RestartData on the heap throttle: Assert that bkt->max is valid in throttle_compute_wait() iotests: Print full path of bad output if mismatch iotests: use virtio aliases for 067 iotests: use -ccw on s390x for 051 iotests: use -ccw on s390x for 040, 139, and 182 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27migration: Route more error pathsDr. David Alan Gilbert1-3/+6
vmstate_save_state is called in lots of places. Route error returns from the easier cases back up; there are lots of more complex cases where their own error paths need fixing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-7-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Commit message fix up as Peter's review
2017-09-27migration: pre_save return intDr. David Alan Gilbert1-1/+3
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-26qemu-iotests: add shrinking image testPavel Butsykin3-0/+176
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26qemu-img: add --shrink flag for resizePavel Butsykin2-3/+3
The flag is additional precaution against data loss. Perhaps in the future the operation shrink without this flag will be blocked for all formats, but for now we need to maintain compatibility with raw. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com [mreitz: Added a missing space to a warning] Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26iotests: fix 181: enable postcopy-ram capability on targetVladimir Sementsov-Ogievskiy2-1/+2
Migration capabilities should be enabled on both source and destination qemu processes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26qemu-iotests: Test change-backing-file commandKevin Wolf3-0/+171
This involves a temporary read-write reopen if the backing file link in the middle of a backing file chain should be changed and is therefore a good test for the latest bdrv_reopen() vs. op blockers fixes. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26qemu-io: Drop write permissions before read-only reopenKevin Wolf1-1/+1
qemu-io provides a 'reopen' command that allows switching from writable to read-only access. We need to make sure that we don't try to keep write permissions to a BlockBackend that becomes read-only, otherwise things are going to fail. This requires a bdrv_drain() call because otherwise in-flight AIO write requests could issue new internal requests while the permission has already gone away, which would cause assertion failures. Draining the queue doesn't break AIO requests in any new way, bdrv_reopen() would drain it anyway only a few lines later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2017-09-26iotests: Print full path of bad output if mismatchFam Zheng1-1/+1
So it is easier to copy paste the path. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26iotests: use virtio aliases for 067Cornelia Huck2-2/+2
The default cpu model on s390x does not provide zPCI, which is not yet wired up on tcg. Moreover, virtio-ccw is the standard on s390x. Using virtio-scsi will implicitly pick the right device, so just switch to that for simplicity. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26iotests: use -ccw on s390x for 051Cornelia Huck3-3/+13
The default cpu model on s390x does not provide zPCI, which is not yet wired up on tcg. Moreover, virtio-ccw is the standard on s390x, so use the -ccw instead of the -pci versions of virtio devices on s390x. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26iotests: use -ccw on s390x for 040, 139, and 182Cornelia Huck3-5/+26
The default cpu model on s390x does not provide zPCI, which is not yet wired up on tcg. Moreover, virtio-ccw is the standard on s390x, so use the -ccw instead of the -pci versions of virtio devices on s390x. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26qemu-iotests: Add missing -machine accel=qtestKevin Wolf2-4/+4
A basic set of qemu options is initialised in ./common: export QEMU_OPTIONS="-nodefaults -machine accel=qtest" However, two test cases (172 and 186) overwrite QEMU_OPTIONS and neglect to manually set '-machine accel=qtest'. Add the missing option for 172. 186 probably only copied the code from 172, it doesn't actually need to overwrite QEMU_OPTIONS, so remove that in 186. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-09-26tests/boot-sector: Increase timeout to 600 secondsThomas Huth1-2/+2
If QEMU has been compiled with the flags --enable-tcg-interpreter and --enable-debug, the guest is running incredibly slow. The pxe boot test can take up to 400 seconds when testing the pseries ppc64 machine. While we should still look for ways to speed up the test on the pseries machine, it's better to increase the timeout in this test to 600 seconds anyway to allow the test to pass successfully now with this unusal configuration already. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-22docker: Drop 'set -e' from run scriptFam Zheng1-5/+3
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22docker: Use archive-source.pyFam Zheng2-19/+3
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-09-22tests: Add README for vm testsFam Zheng1-0/+89
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22Makefile: Add rules to run vm testsFam Zheng1-0/+42
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22tests: Add OpenBSD imageFam Zheng1-0/+43
The image is prepared following instructions as in: https://wiki.qemu.org/Hosts/BSD Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22tests: Add NetBSD imageFam Zheng1-0/+42
The image is prepared following instructions as in: https://wiki.qemu.org/Hosts/BSD Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kamil Rytarowski <n54@gmx.com>
2017-09-22tests: Add FreeBSD imageFam Zheng1-0/+42
The image is prepared following instructions as in: https://wiki.qemu.org/Hosts/BSD Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-22tests: Add ubuntu.i386 imageFam Zheng1-0/+89
This adds a 32bit guest. The official LTS cloud image is downloaded and initialized with cloud-init. Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22tests: Add vm test libFam Zheng1-0/+262
This is the common code to implement a "VM test" to 1) Download and initialize a pre-defined VM that has necessary dependencies to build QEMU and SSH access. 2) Archive $SRC_PATH to a .tar file. 3) Boot the VM, and pass the source tar file to the guest. 4) SSH into the VM, untar the source tarball, build from the source. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-09-22tests: Add a test key pairFam Zheng3-0/+34
This will be used by setup test user ssh. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-09-22gitignore: Ignore vm test imagesFam Zheng1-0/+1
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-09-22docker: Add test-blockFam Zheng1-0/+21
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170905025614.579-6-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Based-on: 20170905021201.25684-1-famz@redhat.com
2017-09-22docker: Add nettle-devel to fedora imageFam Zheng1-0/+1
The LUKS cases in qemu-iotests requires this. Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170905025614.579-5-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Based-on: 20170905021201.25684-1-famz@redhat.com
2017-09-22docker: Use unconfined security profileFam Zheng1-0/+1
Some by default blocked syscalls are required to run tests for example userfaultfd. Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170905025614.579-4-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Based-on: 20170905021201.25684-1-famz@redhat.com
2017-09-22docker: Add test_fail and prep_failFam Zheng1-0/+12
They both print a message and exit, but with different status code so distinguish real test errors from env preparation failures. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170905025614.579-3-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Based-on: 20170905021201.25684-1-famz@redhat.com
2017-09-22docker: Fix return code of build_qemu()Fam Zheng1-2/+1
Without "set -e", the "&&" makes sure that the return code reflects the result status, and that make only runs if configure succeeds. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170905025614.579-2-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Based-on: 20170905021201.25684-1-famz@redhat.com
2017-09-22tests/docker: Clean up pathsFam Zheng2-5/+4
The 'run' script already creats src, build and install directories under $TEST_DIR, use it in common.rc. Also the tests always run from $QEMU_SRC/tests/docker, so use a relative $CMD string. Message-Id: <20170817035721.11064-1-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22docker: Enable features explicitly in test-fullFam Zheng1-6/+76
Also avoid "set -e". Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170907141245.31946-3-famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-09-22docker: Update ubuntu imageFam Zheng1-3/+8
Base on the newer ubuntu-lts (16.06) and include more packages for better build coverage. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170907141245.31946-2-famz@redhat.com>
2017-09-22docker: reduce noise when building travis.dockerAlex Bennée1-0/+3
Set the DEBIAN_FRONTEND and locale env vars to stop apt complaining so much as we build the image. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20170725133425.436-7-alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22docker: don't install device-tree-compiler build-deps in travis.dockerAlex Bennée1-2/+1
Installing the device-tree-compiler build-deps is a little extreme. We only actually need the binary so include it with the other packages. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20170725133425.436-6-alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22docker: docker.py make --no-cache skip checksum testAlex Bennée1-1/+2
If you invoke with NOCACHE=1 we pass --no-cache in the argv to docker.py but may still not force a rebuild if the dockerfile checksum hasn't changed. By testing for its presence we can force builds without having to manually remove the docker image. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20170725133425.436-5-alex.bennee@linaro.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22docker: ensure NOUSER for travis imagesAlex Bennée1-0/+1
While adding the current user is a useful default behaviour for creating new images it is not appropriate for Travis which already has a default user. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170725133425.436-2-alex.bennee@linaro.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-19tests: Enable the drive_del test also on s390xThomas Huth4-10/+38
We can use the drive_del test on s390x, too, to check that adding and deleting also works fine with the virtio-ccw bus. But we have to make sure that we use the devices with the "-ccw" suffix instead of the "-pci" suffix for the virtio-ccw transport on s390x. Introduce a helper function called qvirtio_get_dev_type() that returns the correct string for the current architecture. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1504190408-11143-1-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19docker: fix creation of archivesPaolo Bonzini1-1/+0
The pixman submodule does not exist anymore, and its removal broke docker-based tests. Fix it. Cc: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert remaining single line fprintf() to warn_report()Alistair Francis1-1/+1
Convert any remaining uses of fprintf(stderr, "warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i 's|fprintf(.*".*warning[,:] |warn_report("|Ig' {} + The #include lines and chagnes to the test Makefile were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <2c94ac3bb116cc6b8ebbcd66a254920a69665515.1503077821.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Makefile: Remove libqemustub.aPaolo Bonzini1-3/+2
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes result in circular dependencies. To avoid these issues let's just combine both into a single library that functions as both. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19ptimer-test: do not link to libqemustub.a/libqemuutil.aPaolo Bonzini2-1/+5
This test provides its own mocks, so do not use the "standard" stubs in libqemustub.a or the event loop implementation in libqemuutil.a. This is required on OS X, which otherwise brings in qemu-timer.o, async.o and main-loop.o from libqemuutil.a. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19test-qga: add missing qemu-ga tool dependencyPhilippe Mathieu-Daudé1-1/+2
this fixes running 'make check-unit' without running 'make all' beforehand: $ make check-unit ... GTESTER tests/test-qga ** ERROR:tests/test-qga.c:73:fixture_setup: assertion failed (error == NULL): Failed to execute child process "/build/qemu/qemu-ga" (No such file or directory) (g-exec-error-quark, 8) make: *** [check-tests/test-qga] Error 1 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170911210129.5874-1-f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini1-1/+1
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-01-08 16:54:47 +0000