aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2024-01-24tests/qtest: Bump timeouts of boot_sector_test()-based tests to 610 secondsThomas Huth1-2/+4
We're still seeing timeouts in qtests that use a TCG payload with TCI on a slow k8s runner: https://gitlab.com/qemu-project/qemu/-/jobs/5990992722 So we should bump the timeout of cdrom-test to see whether that fixes the issue. Now, cdrom-test, as bios-tables-test, pxe-test and vmgenid-test use the boot_sector_test() function for running a TCG payload. That function already uses an internal timeout of 600 seconds with the remark that the test could be slow with TCI. Thus from the outer meson test runner side, we should not use less than 600 seconds as timeout values for these tests. Let's bump them on the meson side to 610 seconds so that the tests themselves can run with their internal 600 seconds timeout and have some additional seconds on top for reporting the outcome. Message-ID: <20240124084412.465638-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-23tests/unit/test-iov: Fix timeout problem on NetBSD and OpenBSDThomas Huth1-9/+11
The test-iov code uses usleep() with small values (<= 30) in some nested loops with many iterations. This causes a small delay on OSes like Linux that have a precise sleeping mechanism, but on systems like NetBSD and OpenBSD, each usleep() call takes multiple microseconds, which then sum up in a total test time of multiple minutes! Looking at the code, the usleep() does not really seem to be necessary here - if not enough data could be send, we should simply always use select() to wait 'til we can send more. Thus remove the usleep() and re-arrange the code a little bit to make it more clear what is going on here. Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com> Message-ID: <20240122153347.71654-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-23Merge tag 'pull-hex-20240121' of https://github.com/quic/qemu into stagingPeter Maydell1-2/+2
Coverity fix, cross toolchain update, switch to decodetree # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEPWaq5HRZSCTIjOD4GlSvuOVkbDIFAmWuBTwACgkQGlSvuOVk # bDKP2xAAoRj18rgFPSXu1Dmh34uhZ2uxTAdqyozLqlHJBBiaUxA7EyZJqvOc+8Ti # owLIF5fYPL1MZ7EfwW8FZjAc29WtGzmRY/ZwEDZVgdVAyLCnZ0fF785caWdxH5L2 # bA2i9hNfCJvd3HqfeJ0JXgWD/rF5OjlSKWwYOGPkfjkDnSwAV9LlxGq+yhxjpYcc # uSwVUbIipzUQoH5O53xXt2OUSW+WNUYzKpsnLjW/2wTBgXpBXIuxUzao/Iv37hdo # OMcDiM7mH6ic5JoiNyL9pmquOCpwTGHWyREaiWga1IzJIbRKn/Ypr0N1KsTAc28V # 10GcbMpwKHG/umzhi9BoiPTfD1jXIzYWasH+RyBMz3bNCCaKuJmGSnohbud8UVDH # GJHhF72RhBt/bYnwmoYW3OXvk8X+mL7vuq4lKDAB2XNDjAS3+mcGuSu4KJDJeXi9 # l5/Kx0Aef0mmzEbXALErpYP6TTlgj2CCsym3SXi0UuAI94v1sV346jejebMRUndq # UKKUXb+oC0BUNBUPdnaUIr5GAnQl5Xm2E3pihl28NO+U0xvHQSSxInv84Y3JGDiW # /ui4ZYux0V+iHok9MO0ugaIF9Z1o16D43TkZdLbulm8ODuCEz8CuQjDVoayWj3CV # wb290m96zgS03aRAM+yQa+irTrOJ5bh1XOP1dr/FGQHln0mUCCQ= # =aIh2 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 22 Jan 2024 06:03:40 GMT # gpg: using RSA key 3D66AAE474594824C88CE0F81A54AFB8E5646C32 # gpg: Good signature from "Brian Cain <bcain@kernel.org>" [full] # gpg: aka "Brian Cain (QuIC) <bcain@quicinc.com>" [full] # gpg: aka "Brian Cain (CAF) <bcain@codeaurora.org>" [full] # gpg: aka "bcain" [full] # Primary key fingerprint: 6350 20F9 67A7 7164 79EF 49E0 175C 464E 541B 6D47 # Subkey fingerprint: 3D66 AAE4 7459 4824 C88C E0F8 1A54 AFB8 E564 6C32 * tag 'pull-hex-20240121' of https://github.com/quic/qemu: target/hexagon: reduce scope of def_regnum, remove dead assignment Hexagon (target/hexagon) Remove old dectree.py Hexagon (target/hexagon) Use QEMU decodetree (16-bit instructions) Hexagon (target/hexagon) Use QEMU decodetree (32-bit instructions) Hexagon (target/hexagon) Remove dead functions from hex_common.py Hexagon (target/hexagon) Remove unused WRITES_PRED_REG attribute Hexagon (target/hexagon) Make generators object oriented - gen_analyze_funcs Hexagon (target/hexagon) Make generators object oriented - gen_op_regs Hexagon (target/hexagon) Make generators object oriented - gen_idef_parser_funcs Hexagon (target/hexagon) Make generators object oriented - gen_helper_funcs Hexagon (target/hexagon) Make generators object oriented - gen_helper_protos Hexagon (target/hexagon) Make generators object oriented - gen_tcg_funcs Hexagon (target/hexagon) Clean up handling of modifier registers Hexagon (target/hexagon) Fix shadow variable when idef-parser is off tests/docker: Hexagon toolchain update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-23tests/qtest: Bump timeout of the boot-serial-test to 360 secondsThomas Huth1-1/+1
On the slow k8s CI runner, the test sometimes takes more than 240 seconds. See for example this run here where it took ~ 267 seconds: https://gitlab.com/qemu-project/qemu/-/jobs/5806087027#L4769 Thus we have to bump the timeout here even further to be on the safe side. Let's use 360 seconds which should hopefully really be high enough now. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2097 Message-ID: <20240123110353.30658-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-21tests/docker: Hexagon toolchain updateBrian Cain1-2/+2
This update includes support for privileged instructions. Signed-off-by: Brian Cain <bcain@quicinc.com> Reviewed-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Tested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Message-Id: <20240114232354.4109231-1-bcain@quicinc.com>
2024-01-20Merge tag 'pull-request-2024-01-19' of https://gitlab.com/thuth/qemu into ↵Peter Maydell6-11/+9
staging - Fix s390x ISM reset - Remove deprecated CLI options -no-hpet, -no-acpi, -async-teardown, -chroot and -singlestep - Fix installation of the netbsd VM # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWqk40RHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbVb+w//XuWdXzDDof0CsOMhMzBaKLznJ+Qbo4Wr # S5vNJsiJe3KfI3DJa/ZSO2+lwyFpMPjp3aRSm9rAaw2ErejtfGZMSHj5/BGYuHVM # x0VlHWnTEe/7NpG2mRwlxntPyYOtFCQ+xCo4YS9fpLLYSQFNhGMyOyfCobVZc1/A # TDFrS5v1Su1HgYNL6GuyXK8k56ytidBxhuYtfLkR01liUDU1rmTWFcLxrXUwI7Hr # nfamp/W6G9OJ3co0ysYChM8SvXQzCGPBxzGQjrcHpaL7otTW5yliJcNPwyzGdyLU # G+5AcdJ8wT+ONonf3KkUTbxS2J2OHzIGCZpqVWGU0h5Yv43zMpNATUmbUPM0H0l4 # mqtUf4bSyhNwClKdkEWJyvEwNRTIHxWerMgaNp9ntEM3Ac0/3HiOXV/DZOKL04Im # hRHRySSMlyo6Pnnn2fHj3naalKHNVikbvPVR3i8wdYuQ423D35cU8M+yJpJ3Bllt # 5YgScDkVjifan5SmWVdtQ9bgyrdeQHFa9V1iUjxQx5JfAv8w4RBmats8UYrYm/mF # Zrx/zdpL5wneslWwPqLp/gOb5lt8tF4vt0sLgpNa6SxI9Pgz/GhPvuhmfheML17l # znbGEx5q3vqivszZkm8penydut4rbpp6GcoftbI9sIgqfNuuY1d/FZRlb32RTdxH # 1TUiQfGQqbA= # =ytHA # -----END PGP SIGNATURE----- # gpg: Signature made Fri 19 Jan 2024 15:21:49 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-01-19' of https://gitlab.com/thuth/qemu: tests/vm/netbsd: Remove missing py311-expat package cli: Remove deprecated '-singlestep' command line option hmp: Remove deprecated 'singlestep' command qapi: Remove deprecated 'singlestep' member of StatusInfo qemu-options: Remove the deprecated -chroot option qemu-options: Remove the deprecated -async-teardown option qemu-options: Remove the deprecated -no-acpi option qemu-options: Remove the deprecated -no-hpet option s390x/pci: drive ISM reset from subsystem reset s390x/pci: refresh fh before disabling aif s390x/pci: avoid double enable/disable of aif Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-19Merge tag 'hw-cpus-20240119' of https://github.com/philmd/qemu into stagingPeter Maydell1-1/+24
HW core patch queue . Deprecate unmaintained SH-4 models (Samuel) . HPET: Convert DPRINTF calls to trace events (Daniel) . Implement buffered block writes in Intel PFlash (Gerd) . Ignore ELF loadable segments with zero size (Bin) . ESP/NCR53C9x: PCI DMA fixes (Mark) . PIIX: Simplify Xen PCI IRQ routing (Bernhard) . Restrict CPU 'start-powered-off' property to sysemu (Phil) . target/alpha: Only build sys_helper.c on system emulation (Phil) . target/xtensa: Use generic instruction breakpoint API & add test (Max) . Restrict icount to system emulation (Phil) . Do not set CPUState TCG-specific flags in non-TCG accels (Phil) . Cleanup TCG tb_invalidate API (Phil) . Correct LoongArch/KVM include path (Bibo) . Do not ignore throttle errors in crypto backends (Phil) . MAINTAINERS updates (Raphael, Zhao) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmWqXbkACgkQ4+MsLN6t # wN6VVBAAkP/Bs2JfQYobPZVV868wceM97KeUJMXP2YWf6dSLpHRCQN5KtuJcACM9 # y3k3R7nMeVJSGmzl/1gF1G9JhjoCLoVLX/ejeBppv4Wq//9sEdggaQfdCwkhWw2o # IK/gPjTZpimE7Er4hPlxmuhSRuM1MX4duKFRRfuZpE7XY14Y7/Hk12VIG7LooO0x # 2Sl8CaU0DN7CWmRVDoUkwVx7JBy28UVarRDsgpBim7oKmjjBFnCJkH6B6NJXEiYr # z1BmIcHa87S09kG1ek+y8aZpG9iPC7nUWjPIQyJGhnfrnBuO7hQHwCLIjHHp5QBR # BoMr8YQNTI34/M/D8pBfg96LrGDjkQOfwRyRddkMP/jJcNPMAPMNGbfVaIrfij1e # T+jFF4gQenOvy1XKCY3Uk/a11P3tIRFBEeOlzzQg4Aje9W2MhUNwK2HTlRfBbrRr # V30R764FDmHlsyOu6/E3jqp4GVCgryF1bglPOBjVEU5uytbQTP8jshIpGVnxBbF+ # OpFwtsoDbsousNKVcO5+B0mlHcB9Ru9h11M5/YD/jfLMk95Ga90JGdgYpqQ5tO5Y # aqQhKfCKbfgKuKhysxpsdWAwHZzVrlSf+UrObF0rl2lMXXfcppjCqNaw4QJ0oedc # DNBxTPcCE2vWhUzP3A60VH7jLh4nLaqSTrxxQKkbx+Je1ERGrxs= # =KmQh # -----END PGP SIGNATURE----- # gpg: Signature made Fri 19 Jan 2024 11:32:09 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'hw-cpus-20240119' of https://github.com/philmd/qemu: (36 commits) configure: Add linux header compile support for LoongArch MAINTAINERS: Update hw/core/cpu.c entry MAINTAINERS: Update Raphael Norwitz email hw/elf_ops: Ignore loadable segments with zero size hw/scsi/esp-pci: set DMA_STAT_BCMBLT when BLAST command issued hw/scsi/esp-pci: synchronise setting of DMA_STAT_DONE with ESP completion interrupt hw/scsi/esp-pci: generate PCI interrupt from separate ESP and PCI sources hw/scsi/esp-pci: use correct address register for PCI DMA transfers target/riscv: Rename tcg_cpu_FOO() to include 'riscv' target/i386: Rename tcg_cpu_FOO() to include 'x86' hw/s390x: Rename cpu_class_init() to include 'sclp' hw/core/cpu: Rename cpu_class_init() to include 'common' accel: Rename accel_init_ops_interfaces() to include 'system' cpus: Restrict 'start-powered-off' property to system emulation system/watchpoint: Move TCG specific code to accel/tcg/ system/replay: Restrict icount to system emulation hw/pflash: implement update buffer for block writes hw/pflash: use ldn_{be,le}_p and stn_{be,le}_p hw/pflash: refactor pflash_data_write() hw/i386/pc_piix: Make piix_intx_routing_notifier_xen() more device independent ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-19Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell1-1/+1
* vga: implement odd/even and byte/word/doubleword modes more accurately * vga: implement horizontal pel panning * KVM: add class property to configure KVM device node to use * fix various bugs in x86 TCG PC-relative translation * properly align huge pages on LoongArch * cleanup patches # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWo8wkUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhHAf+KiYvN/gxrYnpSS7IfbFqx6MtQrwW # Hj9QsfgRF2sThRu6BveLMG7REwEtwFh7lMhUbiyR/mzuYN9cMmHDw4OE62WRrL86 # 3PAtzAaJ/Lzd8Qp4K4un+ZrFZvq8a83HvGRRTaF9wO6/9EwpqmqMTbrNlSSA08Gy # mnfXGEt0oYitJ3JUH0MI8y6EOh1mkIhEfGPeyJaGDZVW/m4ob+QIauNOOozYN7r6 # QK+2OU0HeJC5CIzi2o5kq5U0AydVO1iAp7OBxtclYaaSvRyhlpEmbdTIKCzzPlUx # vZthxbU2PgzUbME8fraUcd7GzT64++QOLDxNyZNEL8PCCcd0lRQ0EEukgA== # =Uz0X # -----END PGP SIGNATURE----- # gpg: Signature made Thu 18 Jan 2024 09:44:41 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: tests/tcg: Don't #include <inttypes.h> in aarch64/system/vtimer.c qemu/osdep: Add huge page aligned support on LoongArch platform remove unnecessary casts from uintptr_t target/i386: pcrel: store low bits of physical address in data[0] target/i386: fix incorrect EIP in PC-relative translation blocks target/i386: Do not re-compute new pc with CF_PCREL io_uring: move LuringState typedef to block/aio.h Add class property to configure KVM device node to use vga: sort-of implement word and double-word access modes vga: use latches in odd/even mode too vga: reindent memory access code vga: optimize horizontal pel panning in 256-color modes vga: implement horizontal pel panning in graphics modes vga: mask addresses in non-VESA modes to 256k vga: introduce VGADisplayParams vga: use common endian swap macros Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-19tests/tcg/xtensa: add icount/ibreak priority testMax Filippov1-1/+24
When icount and ibreak exceptions are due to happen on the same address icount has higher precedence. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20231130171920.3798954-3-jcmvbkbc@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-01-19tests/vm/netbsd: Remove missing py311-expat packagePhilippe Mathieu-Daudé1-1/+0
Since the pkgsrc-2023Q3 release [*], the py-expat package has been merged into the base 'python' package: - Several packages have been folded into base packages. While the result is simpler, those updating may need to force-remove the secondary packages, depending on the update method. When doing make replace, one has to pkg_delete -f the secondary packages. pkgin handles at least the python packages correctly, removing the split package when updating python. Specific packages and the former packages now included: * cairo: cairo-gobject * python: py-cElementTree py-curses py-cursespanel py-expat py-readline py-sqlite3 Remove py311-expat from the package list in order to avoid: ### Installing packages ... processing remote summary (http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All)... database for http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All is up-to-date py311-expat is not available in the repository ... calculating dependencies.../py311-expat is not available in the repository pkg_install error log can be found in /var/db/pkgin/pkg_install-err.log [*] https://mail-index.netbsd.org/netbsd-announce/2024/01/01/msg000360.html Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2109 Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240117140746.23511-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-19hmp: Remove deprecated 'singlestep' commandPhilippe Mathieu-Daudé1-1/+0
This command has been deprecated before the 8.1 release, in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'"). Time to drop it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: "Dr. David Alan Gilbert" <dave@treblig.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240117151430.29235-3-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-19qapi: Remove deprecated 'singlestep' member of StatusInfoPhilippe Mathieu-Daudé4-9/+9
This member has been deprecated before the 8.1 release, in commit 34c18203d4 ("qmp: Deprecate 'singlestep' member of StatusInfo"). Time to drop it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240117151430.29235-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-18Merge tag 'pull-target-arm-20240118' of ↵Peter Maydell3-0/+861
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * docs/devel/docs: Document .hx file syntax * arm_pamax() no longer needs to do feature propagation * docs/system/arm/virt.rst: Improve 'highmem' option docs * STM32L4x5 Implement SYSCFG and EXTI devices * hw/timer: fix systick trace message * hw/arm/virt: Consolidate valid CPU types * load_elf: fix iterator's type for elf file processing # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWpHM4ZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pZxD/sGIXvTeoOCsum7OFpArKoQ # J+wcy74pO526IDzjudgtwP8kFW09oVblMPgrt/68F9LY4Oa7sDNAZX/Xqlhs/hdJ # SVbOXArRmyLvgLpn8KVii9xk9iI/olMGt0S6KcXAErdgFud+JcCevbS0D5fAF4Ua # /G/4ldnwr+WcYUA5IIoi02ymSBm5VNeH2bKu0MPS3xpizjzgOFxWTBYwq3zkZYWD # w5GjH9+F+IC67CiAlCLvuQBqpGLdRwFBttU05hLtGXuSlnvS+FtJTooI7gGD17CR # 2wTa7qF716qDN1lNSIvxA6t8/dWNMIYCZYdlxJml476WzP3jECpth2WFWqE0G3yg # Orr7sFVB8X6JmtlR34srW6e3CZA3t+4FIWqcdELFLi5IQtJeer90jqQ9xwx4SttJ # nsHdy5M8txWSa61yAaDTXMID/smVlC7sWTKJrR9kV7v5+b9OPQ/R8k0mCODl5Aer # mzAVuCvUQVYK3j7fzprGrlldla57s3v78OAhqACLgKflK0+aJSJjglulPrSMK1z5 # bRPS5jLZjFwEi2VaLVg3LPJiBMDj1s/wAl0ycfCQSv2oEzvmpkw+Ar1HDc2NFe+d # 9dunbdhAZJMwh+ABIg7iMj+l0ncOXDa4DS+6BnjRxfECCa172u3viq1HATkLLAFI # GTkcJ5hIQzNEeg9ob0MDIg== # =Rfpe # -----END PGP SIGNATURE----- # gpg: Signature made Thu 18 Jan 2024 12:42:54 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240118' of https://git.linaro.org/people/pmaydell/qemu-arm: load_elf: fix iterator's type for elf file processing hw/arm/virt: Consolidate valid CPU types hw/timer: fix systick trace message tests/qtest: Add STM32L4x5 SYSCFG QTest testcase hw/arm: Connect STM32L4x5 SYSCFG to STM32L4x5 SoC hw/misc: Implement STM32L4x5 SYSCFG tests/qtest: Add STM32L4x5 EXTI QTest testcase hw/arm: Connect STM32L4x5 EXTI to STM32L4x5 SoC hw/misc: Implement STM32L4x5 EXTI docs/system/arm/virt.rst: Improve 'highmem' option docs target/arm: arm_pamax() no longer needs to do feature propagation docs/devel/docs: Document .hx file syntax Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-18Merge tag 'pull-request-2024-01-16' of https://gitlab.com/thuth/qemu into ↵Peter Maydell2-3/+5
staging * Improve the timeouts for some problematic qtests * Enable some ROP mitigation compiler switches # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWmNDURHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbVM0w/+Nafbtnw9Q1gp633CIYQRsNDGiKiCND5H # epLfd3DFAG2jATZm/hIIrV3dlEkGRQh916XKik572eUm2yyu3i3EqVNooTcLr0k/ # 4MI1ZzG0rnAnAr15zVdUaDCiaGdlpcSGTwLDAlQjIR4n0MdugQ/bkrfkDRU0YD/6 # mv/yDck5fHOUDm88LA7Gxep0G7U8Wi8oiQXx+WlbQpmDHfBJM7ERQSPhXobtVtFO # 8wpceUcMwlGBecxEsRggrRhdn09CJUyuirP8UHG4rT8xMjkXpqHJVqZ+gVDyV65J # y9y6snCk+oFyCTDSstQxVbzHg/1C4xE2gVUMaXv4Wu1TcCgBpF1WDQymXb35Buuh # pbgAaF1ZsBGwE7rUUJIF3NBTpjmedP4NbCR2EPsiL06w08mG7IRuU/b8JStuAHef # qUqxiHfpEwAxXY8O83XOvBb+zJ625OQHGi/MGDnaYczBfqBJAx2AKiuSmMWBAWo2 # gO4kQX25sPzov6xsLcjEwh0HcJ9W5mkGRJ/x8GSjWnvDlGBDBYWPUShJlohDKGU0 # 4+JGk4+8RKMoKE97bO8DItOp9ahh87up/qHDFkJJo+VKuDaBPdzlS6PURzc8wv0T # QquWUkfdE6qYIPr8ShVYT00NNThIKLyn0qaN4s1mQ+2h8p8nXc4aYsWgcr2wxJFm # sOoVvwOXzDE= # =Yuwq # -----END PGP SIGNATURE----- # gpg: Signature made Tue 16 Jan 2024 07:45:57 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-01-16' of https://gitlab.com/thuth/qemu: meson: mitigate against use of uninitialize stack for exploits meson: mitigate against ROP exploits with -fzero-call-used-regs qtest: Bump npcm7xx_watchdog_timer-test timeout to 2 minutes tests/qtest/npcm7xx_watchdog_timer: Only test the corner cases by default tests/qtest/meson.build: Bump the boot-serial-test timeout to 4 minutes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-18acpi/tests/avocado/bits: wait for 200 seconds for SHUTDOWN event from bits VMAni Sinha1-3/+6
By default, the timeout to receive any specified event from the QEMU VM is 60 seconds set by the python avocado test framework. Please see event_wait() and events_wait() in python/qemu/machine/machine.py. If the matching event is not triggered within that interval, an asyncio.TimeoutError is generated. Since the timeout for the bits avocado test is 200 secs, we need to make event_wait() timeout of the same value as well so that an early timeout is not triggered by the avocado framework. CC: peter.maydell@linaro.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2077 Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20240117042556.3360190-1-anisinha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-18tests/tcg: Don't #include <inttypes.h> in aarch64/system/vtimer.cIlya Leoshkevich1-1/+1
make check-tcg fails on Fedora with: vtimer.c:9:10: fatal error: inttypes.h: No such file or directory Fedora has a minimal aarch64 cross-compiler, which satisfies the configure checks, so it's chosen instead of the dockerized one. There is no cross-version of inttypes.h, however. Fix by using stdint.h instead. The test does not require anything from inttypes.h anyway. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-ID: <20240108125030.58569-1-iii@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-01-16qtest: Bump npcm7xx_watchdog_timer-test timeout to 2 minutesThomas Huth1-0/+1
The npcm7xx_watchdog_timer-test can take more than 60 seconds in SPEED=slow mode on a loaded host system. Bumping to 2 minutes will give more headroom. Message-ID: <20240112164717.1063954-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-16tests/qtest/npcm7xx_watchdog_timer: Only test the corner cases by defaultThomas Huth1-2/+3
The test_prescaler() part in the npcm7xx_watchdog_timer test is quite repetitive, testing all possible combinations of the WTCLK and WTIS bitfields. Since each test spins up a new instance of QEMU, this is rather an expensive test, especially on loaded host systems. For the normal quick test mode, it should be sufficient to test the corner settings of these fields (i.e. 0 and 3), so we can speed up this test in the default mode quite a bit. Message-ID: <20240115070223.30178-1-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-16tests/qtest/meson.build: Bump the boot-serial-test timeout to 4 minutesThomas Huth1-1/+1
When running with TCI, the boot-serial-test can take longer than 3 minutes: https://gitlab.com/qemu-project/qemu/-/jobs/5890481086#L4774 Bump the timeout to 4 minutes to avoid CI failures here. Message-ID: <20240115071146.31213-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-16tests/qtest: Re-enable multifd cancel testFabiano Rosas1-8/+2
We've found the source of flakiness in this test, so re-enable it. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20230606144551.24367-4-farosas@suse.de [peterx: rebase to 2a61a6964c, to use migration_test_add()] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-01-16tests/qtest/migration: Use the new migration_test_addFabiano Rosas1-103/+112
Replace the tests registration with the new function that prints tests names. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240104142144.9680-8-farosas@suse.de Signed-off-by: Peter Xu <peterx@redhat.com>
2024-01-16tests/qtest/migration: Add a wrapper to print test namesFabiano Rosas2-0/+33
Our usage of gtest results in us losing the very basic functionality of "knowing which test failed". The issue is that gtest only prints test names ("paths" in gtest parlance) once the test has finished, but we use asserts in the tests and crash gtest itself before it can print anything. We also use a final abort when the result of g_test_run is not 0. Depending on how the test failed/broke we can see the function that trigged the abort, which may be representative of the test, but it could also just be some generic function. We have been relying on the primitive method of looking at the name of the previous successful test and then looking at the code to figure out which test should have come next. Add a wrapper to the test registration that does the job of printing the test name before running. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240104142144.9680-7-farosas@suse.de Signed-off-by: Peter Xu <peterx@redhat.com>
2024-01-16tests/qtest/migration: Print migration incoming errorsFabiano Rosas1-0/+6
We're currently just asserting when incoming migration fails. Let's print the error message from QMP as well. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240104142144.9680-6-farosas@suse.de Signed-off-by: Peter Xu <peterx@redhat.com>
2024-01-15tests/qtest: Add STM32L4x5 SYSCFG QTest testcaseInès Varhol2-1/+333
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240109194438.70934-4-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-15tests/qtest: Add STM32L4x5 EXTI QTest testcaseInès Varhol2-0/+529
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240109160658.311932-4-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-12Merge tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu ↵Peter Maydell6-14/+46
into staging testing and misc updates - add LE microblaze test to avocado - use modern snapshot=on to avoid trashing disk image - use plain bool for fe_is_open - various updates to qtest timeouts - enable meson test timeouts - tweak the readthedocs environment - partially revert un-flaking x86_64 # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe # KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo # Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr # ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv # duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE # Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1 # gXryjX2rukSujySP3vkdtTp0dmkbpg== # =ZuDd # -----END PGP SIGNATURE----- # gpg: Signature made Fri 12 Jan 2024 13:25:27 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu: (22 commits) tests/avocado: partially revert unmasking of replay_linux tests readthodocs: fully specify a build environment mtest2make: stop disabling meson test timeouts tests/fp: Bump fp-test-mulAdd test timeout to 3 minutes tests/unit: Bump test-crypto-block test timeout to 5 minutes tests/unit: Bump test-aio-multithread test timeout to 2 minutes tests/qtest: Bump the device-introspect-test timeout to 12 minutes qtest: bump bios-table-test timeout to 9 minutes qtest: bump aspeed_smc-test timeout to 6 minutes qtest: bump qos-test timeout to 2 minutes qtest: bump boot-serial-test timeout to 3 minutes qtest: bump prom-env-test timeout to 6 minutes qtest: bump pxe-test timeout to 10 minutes qtest: bump test-hmp timeout to 4 minutes qtest: bump npcm7xx_pwm-test timeout to 5 minutes qtest: bump qom-test timeout to 15 minutes qtest: bump migration-test timeout to 8 minutes qtest: bump min meson timeout to 60 seconds chardev: use bool for fe_is_open gitlab: include microblazeel in testing ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-12Merge tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu into ↵Peter Maydell5-53/+59
staging * Fix non-deterministic failures of the 'netdev-socket' qtest * Fix device presence checking in the virtio-ccw qtest * Support codespell checking in checkpatch.pl * Fix emulation of LAE s390x instruction * Work around htags bug when environment is large * Some other small clean-ups here and there # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWgHlgRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbXAnBAAjQve/Jmfp9p8eQmswG7cl/a2TuJ59b9X # SFRja2PprV/Wp4kxxEJX4er9F2+rlMusNL62LBp/QjZi9u4lCvCmuB7sMa0wEkjr # BPPBrkxkAT+/8vhGpYg2GrxZv/UOLkycp3sjEp4v5yXWQw+OEBnkZZ+AuHddpnEr # NKMKss71uQmccvuzD5FMDfbJQcSBD/yGPyFfDrv1RKreYRlbkEDVlcVoZpfoMwQY # Pl167iDdmjVtsT+4wf8vHo5W/AYKDOjlV6AoujCnJVZnGx6BtDLiF/iNJ/VU1Ty5 # cRxySPT64HG+cGrbRqz9IjDvs++WW5EQn1jPY8NO2XFz3sney6Cs/pLKjqJY9S7P # kfOXOBZG3zOI1kgd/CSR5b4szg4XvtTZaupczKiGOpYC9klf0oQNXGU5jXi3Csop # Q332oUgiPeNdOx/4tXobFX6RwVCqLRYZbHx9RRYSxWlqJJPAB74/n+RZsmOtsxuJ # RaiPKDmbVlslkUm78gIa5e6DMwDk2wmlkqa64W7VZxyqfQTRDPiPvfMGePkj6tmZ # h9vUsELwwORlHpZyL08n0fzs3aeIYwzPwhfr+5iQZIawIp4Zqo8i8Lic/WfIlok9 # rmPIA0mjs1VtrUsroItw4NcY04xcVa7hkhz4EbkZROrfGamdkLuvbk2OKuOeoL0U # lpgtQL6jA7E= # =F/j2 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 11 Jan 2024 16:59:04 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu: .gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large tests/tcg/s390x: Test LOAD ADDRESS EXTENDED target/s390x: Fix LAE setting a wrong access register scripts/checkpatch: Support codespell checking hw/s390x/ccw: Replace dirname() with g_path_get_dirname() hw/s390x/ccw: Replace basename() with g_path_get_basename() target/s390x/kvm/pv: Provide some more useful information if decryption fails gitlab: fix s390x tag for avocado-system-centos tests/qtest/virtio-ccw: Fix device presence checking qtest: ensure netdev-socket tests have non-overlapping names net: handle QIOTask completion to report useful error message net: add explicit info about connecting/listening state Revert "tests/qtest/netdev-socket: Raise connection timeout to 120 seconds" Revert "osdep: add getloadavg" Revert "netdev: set timeout depending on loadavg" qtest: use correct boolean type for failover property q800: move dp8393x_prom memory region to Q800MachineState Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-12tests/avocado: partially revert unmasking of replay_linux testsAlex Bennée1-0/+3
It seems we were premature in declaring replay_linux.py fixed. The x86_64 image still seems to hang occasionally. I've raised a new bug to cover it: https://gitlab.com/qemu-project/qemu/-/issues/2094 Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12tests/fp: Bump fp-test-mulAdd test timeout to 3 minutesThomas Huth1-1/+1
When running the tests in slow mode with --enable-debug on a very loaded system, the fp-test-mulAdd test can take longer than 2 minutes. Bump the timeout to three minutes to make sure it passes in such situations, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-16-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12tests/unit: Bump test-crypto-block test timeout to 5 minutesThomas Huth1-0/+1
When running the tests in slow mode on a very loaded system and with --enable-debug, the test-crypto-block can take longer than 4 minutes. Bump the timeout to 5 minutes to make sure that it also passes in such situations. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-15-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12tests/unit: Bump test-aio-multithread test timeout to 2 minutesThomas Huth1-0/+1
When running the tests in slow mode on a very loaded system and with --enable-debug, the test-aio-multithread can take longer than 1 minute. Bump the timeout to two minutes to make sure that it also passes in such situations. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-14-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12tests/qtest: Bump the device-introspect-test timeout to 12 minutesThomas Huth1-0/+1
When running the test in slow mode on a very loaded system with the arm/aarch64 target and with --enable-debug, it can take longer than 10 minutes to finish the introspection test. Bump the timeout to twelve minutes to make sure that it also finishes in such situations. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-13-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump bios-table-test timeout to 9 minutesDaniel P. Berrangé1-1/+1
This is reliably hitting the current 2 minute timeout in GitLab CI, and for the TCI job, it even hits a 6 minute timeout. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230717182859.707658-12-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-12-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump aspeed_smc-test timeout to 6 minutesDaniel P. Berrangé1-0/+1
On a loaded system with --enable-debug, this test can take longer than 5 minutes. Raising the timeout to 6 minutes gives greater headroom for such situations. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Increase the timeout to 6 minutes for very loaded systems] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-11-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump qos-test timeout to 2 minutesDaniel P. Berrangé1-0/+1
The qos-test takes just under 1 minute in a --enable-debug build. Bumping to 2 minutes will give more headroom. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20230717182859.707658-10-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-10-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump boot-serial-test timeout to 3 minutesDaniel P. Berrangé1-0/+1
The boot-serial-test takes about 1 + 1/2 minutes in a --enable-debug build. Bumping to 3 minutes will give more headroom. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20230717182859.707658-9-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-9-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump prom-env-test timeout to 6 minutesDaniel P. Berrangé1-0/+1
The prom-env-test can take more than 5 minutes in a --enable-debug build on a loaded system. Bumping to 6 minutes will give more headroom. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Bump timeout to 6 minutes instead of 3] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-8-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump pxe-test timeout to 10 minutesDaniel P. Berrangé1-0/+1
The pxe-test uses the boot_sector_test() function, and that already uses a timeout of 600 seconds. So adjust the timeout on the meson side accordingly. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Bump timeout to 600s and adjust commit description] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-7-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump test-hmp timeout to 4 minutesDaniel P. Berrangé1-1/+1
The hmp test takes just under 3 minutes in a --enable-debug build. Bumping to 4 minutes will give more headroom. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20230717182859.707658-6-berrange@redhat.com> [thuth: fix copy-n-paste error in the description] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-6-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump npcm7xx_pwm-test timeout to 5 minutesDaniel P. Berrangé1-1/+1
The npcm7xx_pwm-test takes 3 & 1/2 minutes in a --enable-debug build. Bumping to 5 minutes will give more headroom. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20230717182859.707658-5-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-5-thuth@redhat.com> [AJB: s/pwn/pwm] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump qom-test timeout to 15 minutesDaniel P. Berrangé1-1/+1
The qom-test is periodically hitting the 5 minute timeout when running on the aarch64 emulator under GitLab CI. With an --enable-debug build it can take over 10 minutes for arm/aarch64 targets. Setting timeout to 15 minutes gives enough headroom to hopefully make it reliable. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230717182859.707658-4-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-4-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump migration-test timeout to 8 minutesDaniel P. Berrangé1-1/+1
The migration test should take between 1 min 30 and 2 mins on reasonably modern hardware. The test is not especially compute bound, rather its running time is dominated by the guest RAM size relative to the bandwidth cap, which forces each iteration to take at least 30 seconds. None the less under high load conditions with multiple QEMU processes spawned and competing with other parallel tests, the worst case running time might be somewhat extended. Bumping the timeout to 8 minutes gives us good headroom, while still catching stuck tests relatively quickly. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230717182859.707658-3-berrange@redhat.com> [thuth: Bump timeout to 8 minutes to make it work on very loaded systems, too] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-3-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12qtest: bump min meson timeout to 60 secondsDaniel P. Berrangé1-7/+2
Even some of the relatively fast qtests can sometimes hit the 30 second timeout in GitLab CI under high parallelism/load conditions. Bump the min to 60 seconds to give a higher margin for reliability. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20230717182859.707658-2-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-2-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-12tests/avocado: use snapshot=on in kvm_xen_guestAlex Bennée1-1/+1
This ensures the rootfs is never permanently changed as we don't need persistence between tests anyway. Message-Id: <20240103173349.398526-3-alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-01-12tests/avocado: Add a test for a little-endian microblaze machineThomas Huth1-0/+26
We've already got a test for a big endian microblaze machine, but so far we lack one for a little endian machine. Now that the QEMU advent calendar featured such an image, we can test the little endian mode, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215161851.71508-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-01-11Merge tag 'firmware/edk2-20231213-pull-request' of ↵Peter Maydell1-0/+0
https://gitlab.com/kraxel/qemu into staging edk2: update to git snapshot (maybe for-8.2) This updates edk2 to git master as of today. This picks up a patch (merged only yesterday, that's why this last-minute PR) which allows to work around a bug in shim, and enables that workaround in the qemu firmware builds. This solves a real-world problem on arm hardware, walk over to https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details. Merging this firmware update that close to the 8.2 release clearly is not without risks. If I get a 'no', I'm not going to complain. That said I'm not aware of any bugs, and landing this in 8.2.0 would make a bunch of folks hanging around in issue 1990 very happy. Alternative plan would be to merge this after the release, give it some time for testing, and assuming everything goes well schedule a backport for 8.2.1 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo # cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO # NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA # Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6 # o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp # /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k # BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4 # UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ # gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l # YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct # ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp # MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU= # =bcZj # -----END PGP SIGNATURE----- # gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu: tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes tests/acpi: update expected data files edk2: update binaries to git snapshot edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE. edk2: update to git snapshot tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-11tests/tcg/s390x: Test LOAD ADDRESS EXTENDEDIlya Leoshkevich2-0/+32
Add a small test to prevent regressions. Userspace runs in primary mode, so LAE should always set the access register to 0. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-ID: <20240111092328.929421-3-iii@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-11tests/qtest/virtio-ccw: Fix device presence checkingSamuel Tardieu1-1/+1
An apparent copy-paste error tests for the presence of the virtio-rng-ccw device in order to perform tests on the virtio-scsi-ccw device. Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Message-ID: <20240106130121.1244993-1-sam@rfc1149.net> Fixes: 65331bf5d1 ("tests/qtest: Check for virtio-ccw devices before using them") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-11qtest: ensure netdev-socket tests have non-overlapping namesDaniel P. Berrangé1-1/+1
When naming glib tests if the name of one test is a substring of the name of another test, it is not possible to use the '-p /the/name' option to run a single test. Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com> Message-ID: <20240104162942.211458-7-berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-01-11net: add explicit info about connecting/listening stateDaniel P. Berrangé1-5/+5
When running 'info network', if the stream backend is still in the process of connecting, or waiting for an incoming connection, no information is displayed. There is also no way to distinguish whether the server is still in the process of setting up the listener socket, or whether it is ready to accept incoming client connections. This leads to a race condition in the netdev-socket qtest which launches a server process followed by a client process. Under high load conditions it is possible for the client to attempt to connect before the server is accepting clients. For the scenarios which do not set the 'reconnect' option, this opens up a race which can lead to the test scenario failing to reach the expected state. Now that 'info network' can distinguish between initialization phase and the listening phase, the netdev-socket qtest will correctly synchronize, such that the client QEMU is not spawned until the server is ready. This should solve the non-deterministic failures seen with the netdev-socket qtest. Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com> Message-ID: <20240104162942.211458-5-berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2025-09-26 17:28:47 +0000