aboutsummaryrefslogtreecommitdiff
path: root/tests/test-string-input-visitor.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-20tests: Fix uninitialized byte in test_visitor_in_fuzzAndrey Shinkevich1-5/+3
One byte in the local buffer stays uninitialized, at least with the first iteration, because of the double decrement in the test_visitor_in_fuzz(). This is what Valgrind does not like and not critical for the test itself. So, reduce the number of the memory issues reports. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Message-Id: <1564502498-805893-3-git-send-email-andrey.shinkevich@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-13test-string-input-visitor: Add range overflow testsDavid Hildenbrand1-0/+10
Let's make sure that the range handling code can properly deal with ranges that end at the biggest possible number. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-10-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13test-string-input-visitor: Split off uint64 list testsDavid Hildenbrand1-4/+109
Basically copy all int64 list tests but adapt them to work on uint64 instead. The values for very big/very small values have to be adapted. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-9-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13test-string-input-visitor: Use virtual walkDavid Hildenbrand1-24/+12
We now support virtual walks, so use that instead. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-8-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13qapi: Rewrite string-input-visitor's integer and list parsingDavid Hildenbrand1-14/+4
The input visitor has some problems right now, especially - unsigned type "Range" is used to process signed ranges, resulting in inconsistent behavior and ugly/magical code - uint64_t are parsed like int64_t, so big uint64_t values are not supported and error messages are misleading - lists/ranges of int64_t are accepted although no list is parsed and we should rather report an error - lists/ranges are preparsed using int64_t, making it hard to implement uint64_t values or uint64_t lists - types that don't support lists don't bail out - visiting beyond the end of a list is not handled properly - we don't actually parse lists, we parse *sets*: members are sorted, and duplicates eliminated So let's rewrite it by getting rid of usage of the type "Range" and properly supporting lists of int64_t and uint64_t (including ranges of both types), fixing the above mentioned issues. Lists of other types are not supported and will properly report an error. Virtual walks are now supported. Tests have to be fixed up: - Two BUGs were hardcoded that are fixed now - The string-input-visitor now actually returns a parsed list and not an ordered set. Please note that no users/callers have to be fixed up. Candidates using visit_type_uint16List() and friends are: - backends/hostmem.c:host_memory_backend_set_host_nodes() -- Code can deal with duplicates/unsorted lists - numa.c::query_memdev() -- via object_property_get_uint16List(), the list will still be sorted and without duplicates (via host_memory_backend_get_host_nodes()) - qapi-visit.c::visit_type_Memdev_members() - qapi-visit.c::visit_type_NumaNodeOptions_members() - qapi-visit.c::visit_type_RockerOfDpaGroup_members - qapi-visit.c::visit_type_RxFilterInfo_members() -- Not used with string-input-visitor. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-7-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13test-string-input-visitor: Add more testsDavid Hildenbrand1-2/+39
Test that very big/small values are not accepted and that ranges with only one element work. Also test that ranges are ascending and cannot have more than 65536 elements. Rename expect4 to expect5, as we will be moving that to a separate ulist test after the rework. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-6-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13qapi: Fix string-input-visitor to reject NaN and infinitiesDavid Hildenbrand1-0/+13
The string-input-visitor happily accepts NaN and infinities when parsing numbers (doubles). They shouldn't. Fix that. Also, add two test cases, testing if "NaN" and "inf" is properly rejected. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-4-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-02-09Eliminate qapi/qmp/types.hMarkus Armbruster1-1/+0
qapi/qmp/types.h is a convenience header to include a number of qapi/qmp/ headers. Since we rarely need all of the headers qapi/qmp/types.h includes, we bypass it most of the time. Most of the places that use it don't need all the headers, either. Include the necessary headers directly, and drop qapi/qmp/types.h. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster1-1/+0
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2017-09-04qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)Markus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi: Avoid unnecessary use of enum lookup table's sentinelMarkus Armbruster1-1/+1
Currently, the FOO_lookup[] generated for QAPI enum types are terminated by a NULL sentinel. A future patch will generate enums with "holes". NULL-termination will cease to work then. To prepare for that, replace "have we reached the sentinel?" predicates by "have we reached the FOO__MAX value?" predicates. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-03-21qapi: Fix string input visitor regression for empty listsMarkus Armbruster1-3/+8
Visiting a list when input is the empty string should result in an empty list, not an error. Noticed when commit 3d089ce belatedly added tests, but simply accepted as weird then. It's actually a regression: broken in commit 74f24cb, v2.7.0. Fix it, and throw in another test case for empty string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1490026424-11330-2-git-send-email-armbru@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-05tests: Cover input visit beyond end of listMarkus Armbruster1-0/+16
When you try to visit beyond the end of a list, the qobject input visitor crashes, and the string visitor screws returns garbage. The generated list visits never go beyond the list end, but manual visits could. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-27-git-send-email-armbru@redhat.com>
2017-03-05qapi: Make input visitors detect unvisited list tailsMarkus Armbruster1-1/+3
Fix the design flaw demonstrated in the previous commit: new method check_list() lets input visitors report that unvisited input remains for a list, exactly like check_struct() lets them report that unvisited input remains for a struct or union. Implement the method for the qobject input visitor (straightforward), and the string input visitor (less so, due to the magic list syntax there). The opts visitor's list magic is even more impenetrable, and all I can do there today is a stub with a FIXME comment. No worse than before. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488544368-30622-26-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-05tests: Cover partial input visit of listMarkus Armbruster1-0/+22
Demonstrates a design flaw: there is no way to for input visitors to report that a list visit didn't visit the complete input list. The generated list visits always do, but manual visits needn't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-24-git-send-email-armbru@redhat.com>
2017-03-05test-string-input-visitor: Improve list coverageMarkus Armbruster1-13/+72
Lists with elements above INT64_MAX don't work (known bug). Empty lists don't work (weird). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-23-git-send-email-armbru@redhat.com>
2017-03-05test-string-input-visitor: Tear down existing test automaticallyMarkus Armbruster1-17/+2
Call visitor_input_teardown() from visitor_input_test_init(), so you don't have to call it from the actual tests. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-22-git-send-email-armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange1-1/+1
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-08tests: fix leak in test-string-input-visitorMarc-André Lureau1-0/+1
Free the list returned by visit_type_intList(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-06string-input-visitor: Favor new visit_free() functionEric Blake1-15/+7
Now that we have a polymorphic visit_free(), we no longer need string_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from string_input_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-07tests: Remove unnecessary glib.h includesPeter Maydell1-1/+0
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-12qapi: Simplify semantics of visit_next_list()Eric Blake1-2/+0
The semantics of the list visit are somewhat baroque, with the following pseudocode when FooList is used: start() for (prev = head; cur = next(prev); prev = &cur) { visit(&cur->value) } Note that these semantics (advance before visit) requires that the first call to next() return the list head, while all other calls return the next element of the list; that is, every visitor implementation is required to track extra state to decide whether to return the input as-is, or to advance. It also requires an argument of 'GenericList **' to next(), solely because the first iteration might need to modify the caller's GenericList head, so that all other calls have to do a layer of dereferencing. Thankfully, we only have two uses of list visits in the entire code base: one in spapr_drc (which completely avoids visit_next_list(), feeding in integers from a different source than uint8List), and one in qapi-visit.py. That is, all other list visitors are generated in qapi-visit.c, and share the same paradigm based on a qapi FooList type, so we can refactor how lists are laid out with minimal churn among clients. We can greatly simplify things by hoisting the special case into the start() routine, and flipping the order in the loop to visit before advance: start(head) for (tail = *head; tail; tail = next(tail)) { visit(&tail->value) } With the simpler semantics, visitors have less state to track, the argument to next() is reduced to 'GenericList *', and it also becomes obvious whether an input visitor is allocating a FooList during visit_start_list() (rather than the old way of not knowing if an allocation happened until the first visit_next_list()). As a minor drawback, we now allocate in two functions instead of one, and have to pass the size to both functions (unless we were to tweak the input visitors to cache the size to start_list for reuse during next_list, but that defeats the goal of less visitor state). The signature of visit_start_list() is chosen to match visit_start_struct(), with the new parameters after 'name'. The spapr_drc case is a virtual visit, done by passing NULL for list, similarly to how NULL is passed to visit_start_struct() when a qapi type is not used in those visits. It was easy to provide these semantics for qmp-output and dealloc visitors, and a bit harder for qmp-input (several prerequisite patches refactored things to make this patch straightforward). But it turned out that the string and opts visitors munge enough other state during visit_next_list() to make it easier to just document and require a GenericList visit for now; an assertion will remind us to adjust things if we need the semantics in the future. Several pre-requisite cleanup patches made the reshuffling of the various visitors easier; particularly the qmp input visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qapi: Fix string input visitor handling of invalid listEric Blake1-7/+5
As shown in the previous commit, the string input visitor was treating bogus input as an empty list rather than an error. Fix parse_str() to set errp, then the callers to exit early if an error was reported. Meanwhile, fix the testsuite to use the generated qapi_free_int16List() instead of rolling our own, and to validate the fixed behavior, while at the same time documenting one more change that we'd like to make in a later patch (a failed visit_start_list should guarantee a NULL pointer, regardless of what things were on input). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-23-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12tests/string-input-visitor: Add negative integer testsMarkus Armbruster1-0/+15
Add two negative tests, one for int and one for int16List. The latter exposes a bug: nonsensical input results in an empty list instead of an error. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461325048-14122-1-git-send-email-armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-22-git-send-email-eblake@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16tests: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake1-17/+17
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-06-19tests: simplify codeMichael S. Tsirkin1-3/+1
Use error_abort instead of open-coded assert. Cleaner and shorter. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19qapi: make string input visitor parse int listHu Tao1-0/+36
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: split up patch
2014-06-19tests: fix memory leak in test of string input visitorHu Tao1-0/+3
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-08qmp hmp: Consistently name Error * objects err, and not errpMarkus Armbruster1-25/+25
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-10/+10
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-02-07tests/test-string-input-visitor: Handle errors provoked by fuzz testPeter Maydell1-6/+6
It's OK and expected for visitors to return errors when presented with the fuzz test's random data. Since the fuzzer doesn't care about errors, we pass in NULL rather than an Error**. This fixes a bug in the fuzzer where it was passing the same Error** into each visitor, with the effect that once one visitor returned an error, each later visitor would notice that it had been passed in an Error** representing an already set error, and do nothing. For the case of visit_type_str() we also need to handle the case where an error means that the visitor doesn't set our char*. We initialize the pointer to NULL so we can safely g_free() it regardless of whether the visitor allocated a string for us or not. This fixes a problem where this test failed the MacOSX malloc() consistency checks and might segfault on other platforms [due to calling free() on an uninitialized pointer variable when visit_type_str() failed.]. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-26tests: add fuzzing to visitor testsBlue Swirl1-0/+49
Perform input tests on random data. Improvement to code coverage for qapi/string-input-visitor.c is about 3 percentage points. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move inclusions of qemu-common.h from headers to .c filesPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-03-30test makefile overhaulPaolo Bonzini1-0/+195
This introduces new test reporting infrastructure based on gtester and gtester-report. Also, all existing tests are moved to tests/, and tests/Makefile is reorganized to factor out the commonalities in the rules. Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-27 20:16:26 +0000