aboutsummaryrefslogtreecommitdiff
path: root/tests/qtest
AgeCommit message (Collapse)AuthorFilesLines
2020-02-17qapi: Split control.json off misc.jsonKevin Wolf1-1/+1
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200129102239.31435-3-kwolf@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-13migration-test: fix some memleaks in migration-testPan Nengyuan1-2/+12
spotted by asan, 'check-qtest-aarch64' runs fail if sanitizers is enabled. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-13tests/migration: Add some slack to auto convergeDr. David Alan Gilbert1-1/+2
There's an assert in autoconverge that checks that we quit the iteration when we go below the expected threshold. Philippe saw a case where this assert fired with the measured value slightly over the threshold. (about 3k out of a few million). I can think of two reasons: a) Rounding errors b) That after we make the decision to quit iteration we do one more sync and that sees a few more dirty pages. So add 1% slack to the assertion, that should cover a and most cases of b, probably all we'll see for the test. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-02-08tests/virtio-9p: added readdir testChristian Schoenebeck1-0/+152
The first readdir test simply checks the amount of directory entries returned by 9pfs server, according to the created amount of virtual files on 9pfs synth driver side. Then the subsequent readdir test also checks whether all directory entries have the expected file names (as created on 9pfs synth driver side), ignoring their precise order in result list though. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Message-Id: <e0b4402722a877178f8fb6a8ad7b64bb20150613.1579567020.git.qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2020-02-08tests/virtio-9p: add terminating null in v9fs_string_read()Christian Schoenebeck1-1/+2
The 9p protocol sends strings in general without null termination over the wire. However for future use of this functions it is beneficial for the delivered string to be null terminated though for being able to use the string with standard C functions which often rely on strings being null terminated. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <52c84e2ce3bcafc2a38eed13b8c8e23bc1a8ecb9.1579567019.git.qemu_oss@crudebyte.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2020-02-04tests/qtest: update comments about bios-tables-test-allowed-diff.hHeyi Guo1-5/+5
Update comments in tests/qtest/bios-tables-test.c to reflect the current path of bios-tables-test-allowed-diff.h, which is now under tests/qtest/ as well. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-Id: <20200202110009.51479-1-guoheyi@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04boot-order-test: fix memleaks in boot-order-testPan Nengyuan2-3/+5
It's not a big deal, but 'check qtest-ppc/ppc64' runs fail if sanitizers is enabled. The memory leak stack is as follow: Direct leak of 128 byte(s) in 4 object(s) allocated from: #0 0x7f11756f5970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970) #1 0x7f1174f2549d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d) #2 0x556af05aa7da in mm_fw_cfg_init /mnt/sdb/qemu/tests/libqos/fw_cfg.c:119 #3 0x556af059f4f5 in read_boot_order_pmac /mnt/sdb/qemu/tests/boot-order-test.c:137 #4 0x556af059efe2 in test_a_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:47 #5 0x556af059f2c0 in test_boot_orders /mnt/sdb/qemu/tests/boot-order-test.c:59 #6 0x556af059f52d in test_pmac_oldworld_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:152 #7 0x7f1174f46cb9 (/lib64/libglib-2.0.so.0+0x73cb9) #8 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73) #9 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73) #10 0x7f1174f46f71 in g_test_run_suite (/lib64/libglib-2.0.so.0+0x73f71) #11 0x7f1174f46f94 in g_test_run (/lib64/libglib-2.0.so.0+0x73f94) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200203025935.36228-1-pannengyuan@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04tests/vhost-user-bridge: Fix buildDr. David Alan Gilbert1-1/+0
vhost-user-bridge isn't actually a test, it's just a helper (that should probably move somewhere else) - but the build was broken in the qtest move. Fixes: 833884f37adc9f125fa2 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200117122648.137862-1-dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-03tests: Silence various warnings with pseriesGreg Kurz4-5/+16
Some default features of the pseries machine are only available with KVM. Warnings are printed when the pseries machine is used with another accelerator: qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ccf-assist=on qemu-system-ppc64: warning: Firmware Assisted Non-Maskable Interrupts(FWNMI) not supported in TCG qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ccf-assist=on qemu-system-ppc64: warning: Firmware Assisted Non-Maskable Interrupts(FWNMI) not supported in TCG qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ccf-assist=on qemu-system-ppc64: warning: Firmware Assisted Non-Maskable Interrupts(FWNMI) not supported in TCG This is annoying for CI since it usually runs without KVM. We already disable features that emit similar warnings thanks to properties of the pseries machine, but this is open-coded in various places. Consolidate the set of properties in a single place. Extend it to silence the above warnings. And use it in the various tests that start pseries machines. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158059697130.1820292.7823434132030453110.stgit@bahia.lan> Reviewed-by: Thomas Huth <thuth@redhat.com> [dwg: Correct minor grammatical error] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOSThomas Huth3-27/+2
It's been deprecated since QEMU v3.1. The 40p machine should be used nowadays instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200114114617.28854-1-thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-30target/arm/cpu: Add the kvm-no-adjvtime CPU propertyAndrew Jones1-0/+4
kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30tests/arm-cpu-features: Check feature default valuesAndrew Jones1-9/+28
If we know what the default value should be then we can test for that as well as the feature existence. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30Merge remote-tracking branch ↵Peter Maydell1-2/+112
'remotes/juanquintela/tags/pull-migration-pull-request' into staging Migration pull request # gpg: Signature made Wed 29 Jan 2020 10:57:23 GMT # gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/pull-migration-pull-request: migration/compress: compress QEMUFile is not writable migration: Simplify get_qlist multifd: Split multifd code into its own file multifd: Make multifd_load_setup() get an Error parameter multifd: Make multifd_save_setup() get an Error parameter migration: Make checkpatch happy with comments multifd: Use qemu_target_page_size() multifd: multifd_send_sync_main only needs the qemufile multifd: multifd_queue_page only needs the qemufile multifd: multifd_send_pages only needs the qemufile ram_addr: Split RAMBlock definition migration/multifd: fix nullptr access in multifd_send_terminate_threads migration: Create migration_is_running() migration-test: Make sure that multifd and cancel works migration: Don't send data if we have stopped qemu-file: Don't do IO after shutdown multifd: Make sure that we don't do any IO after an error migration-test: Use g_free() instead of free() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-29migration-test: Make sure that multifd and cancel worksJuan Quintela1-1/+111
Test that this sequence works: - launch source - launch target - start migration - cancel migration - relaunch target - do migration again Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-29migration-test: Use g_free() instead of free()Juan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-28Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell1-100/+74
Pull request # gpg: Signature made Tue 28 Jan 2020 01:05:19 GMT # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: tests/ide-test: Create a single unit-test covering more PRDT cases ide: Fix incorrect handling of some PRDTs in ide_dma_cb() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27tests/ide-test: Create a single unit-test covering more PRDT casesAlexander Popov1-100/+74
Fuzzing the Linux kernel with syzkaller allowed to find how to crash qemu using a special SCSI_IOCTL_SEND_COMMAND. It hits the assertion in ide_dma_cb() introduced in the commit a718978ed58a in July 2015. Currently this bug is not reproduced by the unit tests. Let's improve the ide-test to cover more PRDT cases including one that causes this particular qemu crash. The test is developed according to the Programming Interface for Bus Master IDE Controller (Revision 1.0 5/16/94). Signed-off-by: Alexander Popov <alex.popov@linux.com> Message-id: 20191223175117.508990-3-alex.popov@linux.com Signed-off-by: John Snow <jsnow@redhat.com>
2020-01-27hppa: Add emulation of Artist graphicsSven Schnelle1-1/+2
This adds emulation of Artist graphics good enough to get a text console on both Linux and HP-UX. The X11 server from HP-UX also works. Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs to the serial port, as expected by the test. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191220211512.3289-6-svens@stackframe.org> [rth: Merge Helge's test for machine->enable_graphics] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-22bios-tables-test: document expected file updateMichael S. Tsirkin1-5/+18
Document the flow for the case where contributor updates the expected files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-22tests: q35: MCH: add default SMBASE SMRAM lock testIgor Mammedov1-0/+105
test lockable SMRAM at default SMBASE feature, introduced by patch "q35: implement 128K SMRAM at default SMBASE address" Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575899217-333105-1-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-20migration-test: introduce functions to handle string parametersJuan Quintela1-0/+37
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20migration-test: Add migration multifd testJuan Quintela1-0/+56
We set multifd-channels. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Wei Yang <richardw.yang@linux.intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-16tests/qtest/vhost-user-test: Fix memory leaksThomas Huth1-3/+8
Do not allocate resources in case we return early, and make sure to free dest_cmdline at the end. Reported-by: Euler Robot <euler.robot@huawei.com> Reported-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200116140736.9498-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-16migration-test: ppc64: fix FORTH test programLaurent Vivier1-2/+2
Commit e51e711b1bef has moved the initialization of start_address and end_address after the definition of the command line argument, where the nvramrc is initialized, and thus the loop is between 0 and 0 rather than 1 MiB and 100 MiB. It doesn't affect the result of the test if all the tests are run in sequence because the two first tests don't run the loop, so the values are correctly initialized when we actually need them. But it hangs when we ask to run only one test, for instance: QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \ tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error Fixes: e51e711b1bef ("tests/migration: Add migration-test header file") Cc: wei@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200107163437.52139-1-lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-13Merge remote-tracking branch ↵Peter Maydell176-0/+41333
'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging * Move qtests into a separate directory * Build index.html for docs # gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-01-12: docs: build an index page for the HTML docs tests/libqos: Move the libqos files under tests/qtest/ tests/Makefile: Move qtest-related settings to a separate Makefile.include test: Move qtests to a separate directory tests/Makefile: Separate unit test dependencies from qtest dependencies tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables tests/ptimer: Remove unnecessary inclusion of libqtest.h tests/Makefile: test-char does not need libqtest Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-12tests/libqos: Move the libqos files under tests/qtest/Thomas Huth71-40/+11260
The qos stuff belongs to qtest, so move it into that directory, too. Message-Id: <20191218103059.11729-8-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-12tests/Makefile: Move qtest-related settings to a separate Makefile.includeThomas Huth1-0/+318
tests/Makefile.include is pretty much overcrowded. Now that we have a dedicated folder for the qtests, let's move the related settings to a Makefile.include file in that directory instead. Message-Id: <20191218103059.11729-7-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-12test: Move qtests to a separate directoryThomas Huth105-0/+29795
The tests directory itself is pretty overcrowded, and it's hard to see which test belongs to which test subsystem (unit, qtest, ...). Let's move the qtests to a separate folder for more clarity. Message-Id: <20191218103059.11729-6-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2025-01-16 10:16:47 +0000