aboutsummaryrefslogtreecommitdiff
path: root/tests/qemu-iotests
AgeCommit message (Collapse)AuthorFilesLines
2014-04-11bochs: Fix catalog size checkKevin Wolf2-3/+9
The old check was off by a factor of 512 and didn't consider cases where we don't get an exact division. This could lead to an out-of-bounds array access in seek_to_sector(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-04-04block: Fix snapshot=on for protocol parsed from filenameKevin Wolf2-0/+36
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'. This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work. As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-04-04qemu-iotests: Remove CR line endings in reference outputKevin Wolf1-5/+5
qemu doesn't print these CRs any more. The test still didn't fail because the output comparison ignores line endings, but the change turns up each time when you want to update the output. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-04-04block: Don't parse 'filename' optionKevin Wolf2-0/+15
When using the QDict option 'filename', it is supposed to be interpreted literally. The code did correctly avoid guessing the protocol from any string before the first colon, but it still called bdrv_parse_filename() which would, for example, incorrectly remove a 'file:' prefix in the raw-posix driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-04-04qcow2: Flush metadata during read-only reopenKevin Wolf2-0/+31
If lazy refcounts are enabled for a backing file, committing to this backing file may leave it in a dirty state even if the commit succeeds. The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare() doesn't take care to flush metadata. In order to fix this, this patch also fixes qcow2_mark_clean(), which contains another ineffective bdrv_flush() call beause lazy refcounts are disabled only afterwards. All existing callers of qcow2_mark_clean() either don't modify refcounts or already flush manually, so that this fixes only a latent, but not yet actually triggerable bug. Another instance of the same problem is live snapshots. Again, a real corruption is prevented by an explicit flush for non-read-only images in external_snapshot_prepare(), but images using lazy refcounts stay dirty. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01parallels: Sanity check for s->tracks (CVE-2014-0142)Kevin Wolf2-0/+11
This avoids a possible division by zero. Convert s->tracks to unsigned as well because it feels better than surviving just because the results of calculations with s->tracks are converted to unsigned anyway. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01parallels: Fix catalog size integer overflow (CVE-2014-0143)Kevin Wolf5-0/+91
The first test case would cause a huge memory allocation, leading to a qemu abort; the second one to a too small malloc() for the catalog (smaller than s->catalog_size), which causes a read-only out-of-bounds array access and on big endian hosts an endianess conversion for an undefined memory area. The sample image used here is not an original Parallels image. It was created using an hexeditor on the basis of the struct that qemu uses. Good enough for trying to crash the driver, but not for ensuring compatibility. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Check maximum L1 size in qcow2_snapshot_load_tmp() (CVE-2014-0143)Kevin Wolf2-1/+20
This avoids an unbounded allocation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Fix L1 allocation size in qcow2_snapshot_load_tmp() (CVE-2014-0145)Kevin Wolf2-1/+21
For the L1 table to loaded for an internal snapshot, the code allocated only enough memory to hold the currently active L1 table. If the snapshot's L1 table is actually larger than the current one, this leads to a buffer overflow. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Fix NULL dereference in qcow2_open() error path (CVE-2014-0146)Kevin Wolf2-0/+11
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots != 0. By having the initialisation of both fields separated in qcow2_open(), any error occuring in between would cause the error path to dereference NULL in qcow2_free_snapshots() if the image had any snapshots. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Fix copy_sectors() with VM stateKevin Wolf2-2/+33
bs->total_sectors is not the highest possible sector number that could be involved in a copy on write operation: VM state is after the end of the virtual disk. This resulted in wrong values for the number of sectors to be copied (n). The code that checks for the end of the image isn't required any more because the code hasn't been calling the block layer's bdrv_read() for a long time; instead, it directly calls qcow2_readv(), which doesn't error out on VM state sector numbers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block: vdi bounds check qemu-io testsJeff Cody3-0/+138
This test checks for proper bounds checking of some VDI input headers. The following is checked: 1. Max image size (1024TB) with the appropriate Blocks In Image value (0x3fffffff) is detected as valid. 2. Image size exceeding max (1024TB) is seen as invalid 3. Valid image size but with Blocks In Image value that is too small fails 4. Blocks In Image size exceeding max (0x3fffffff) is seen as invalid 5. 64MB image, with 64 Blocks In Image, and 1MB Block Size is seen as valid 6. Block Size < 1MB not supported 7. Block Size > 1MB not supported [Max Reitz <mreitz@redhat.com> pointed out that "1MB + 1" in the test case is wrong. Change to "1MB + 64KB" to match the 0x110000 value. --Stefan] Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Don't rely on free_cluster_index in alloc_refcount_block() ↵Kevin Wolf4-4/+22
(CVE-2014-0147) free_cluster_index is only correct if update_refcount() was called from an allocation function, and even there it's brittle because it's used to protect unfinished allocations which still have a refcount of 0 - if it moves in the wrong place, the unfinished allocation can be corrupted. So not using it any more seems to be a good idea. Instead, use the first requested cluster to do the calculations. Return -EAGAIN if unfinished allocations could become invalid and let the caller restart its search for some free clusters. The context of creating a snapsnot is one situation where update_refcount() is called outside of a cluster allocation. For this case, the change fixes a buffer overflow if a cluster is referenced in an L2 table that cannot be represented by an existing refcount block. (new_table[refcount_table_index] was out of bounds) [Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to 11. --Stefan] Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Fix backing file name length checkKevin Wolf2-0/+13
len could become negative and would pass the check then. Nothing bad happened because bdrv_pread() happens to return an error for negative length values, but make variables for sizes unsigned anyway. This patch also changes the behaviour to error out on invalid lengths instead of silently truncating it to 1023. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Validate active L1 table offset and size (CVE-2014-0144)Kevin Wolf2-0/+29
This avoids an unbounded allocation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Validate snapshot table offset/size (CVE-2014-0144)Kevin Wolf2-0/+44
This avoid unbounded memory allocation and fixes a potential buffer overflow on 32 bit hosts. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Validate refcount table offsetKevin Wolf2-0/+23
The end of the refcount table must not exceed INT64_MAX so that integer overflows are avoided. Also check for misaligned refcount table. Such images are invalid and probably the result of data corruption. Error out to avoid further corruption. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Check refcount table size (CVE-2014-0144)Kevin Wolf2-0/+17
Limit the in-memory reference count table size to 8 MB, it's enough in practice. This fixes an unbounded allocation as well as a buffer overflow in qcow2_refcount_init(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Check backing_file_offset (CVE-2014-0144)Kevin Wolf2-0/+19
Header, header extension and the backing file name must all be stored in the first cluster. Setting the backing file to a much higher value allowed header extensions to become much bigger than we want them to be (unbounded allocation). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qcow2: Check header_length (CVE-2014-0144)Kevin Wolf3-0/+71
This fixes an unbounded allocation for s->unknown_header_fields. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01vpc: Validate block size (CVE-2014-0142)Kevin Wolf3-0/+82
This fixes some cases of division by zero crashes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01bochs: Check extent_size header field (CVE-2014-0142)Kevin Wolf2-0/+21
This fixes two possible division by zero crashes: In bochs_open() and in seek_to_sector(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01bochs: Check catalog_size header field (CVE-2014-0143)Kevin Wolf2-1/+22
It should neither become negative nor allow unbounded memory allocations. This fixes aborts in g_malloc() and an s->catalog_bitmap buffer overflow on big endian hosts. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01bochs: Use unsigned variables for offsets and sizes (CVE-2014-0147)Kevin Wolf2-0/+12
Gets us rid of integer overflows resulting in negative sizes which aren't correctly checked. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qemu-iotests: Support for bochs formatKevin Wolf5-0/+67
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block/cloop: fix offsets[] size off-by-oneStefan Hajnoczi2-0/+9
cloop stores the number of compressed blocks in the n_blocks header field. The file actually contains n_blocks + 1 offsets, where the extra offset is the end-of-file offset. The following line in cloop_read_block() results in an out-of-bounds offsets[] access: uint32_t bytes = s->offsets[block_num + 1] - s->offsets[block_num]; This patch allocates and loads the extra offset so that cloop_read_block() works correctly when the last block is accessed. Notice that we must free s->offsets[] unconditionally now since there is always an end-of-file offset. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block/cloop: refuse images with bogus offsets (CVE-2014-0144)Stefan Hajnoczi2-0/+23
The offsets[] array allows efficient seeking and tells us the maximum compressed data size. If the offsets are bogus the maximum compressed data size will be unrealistic. This could cause g_malloc() to abort and bogus offsets mean the image is broken anyway. Therefore we should refuse such images. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block/cloop: refuse images with huge offsets arrays (CVE-2014-0144)Stefan Hajnoczi2-0/+10
Limit offsets_size to 512 MB so that: 1. g_malloc() does not abort due to an unreasonable size argument. 2. offsets_size does not overflow the bdrv_pread() int size argument. This limit imposes a maximum image size of 16 TB at 256 KB block size. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block/cloop: prevent offsets_size integer overflow (CVE-2014-0143)Stefan Hajnoczi2-0/+11
The following integer overflow in offsets_size can lead to out-of-bounds memory stores when n_blocks has a huge value: uint32_t n_blocks, offsets_size; [...] ret = bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4); [...] s->n_blocks = be32_to_cpu(s->n_blocks); /* read offsets */ offsets_size = s->n_blocks * sizeof(uint64_t); s->offsets = g_malloc(offsets_size); [...] for(i=0;i<s->n_blocks;i++) { s->offsets[i] = be64_to_cpu(s->offsets[i]); offsets_size can be smaller than n_blocks due to integer overflow. Therefore s->offsets[] is too small when the for loop byteswaps offsets. This patch refuses to open files if offsets_size would overflow. Note that changing the type of offsets_size is not a fix since 32-bit hosts still only have 32-bit size_t. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01block/cloop: validate block_size header field (CVE-2014-0144)Stefan Hajnoczi2-0/+32
Avoid unbounded s->uncompressed_block memory allocation by checking that the block_size header field has a reasonable value. Also enforce the assumption that the value is a non-zero multiple of 512. These constraints conform to cloop 2.639's code so we accept existing image files. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qemu-iotests: add cloop input validation testsStefan Hajnoczi4-0/+60
Add a cloop format-specific test case. Later patches add tests for input validation to the script. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-01qemu-iotests: add ./check -cloop supportStefan Hajnoczi2-0/+10
Add the cloop block driver to qemu-iotests. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14qemu-iotests: remove 085 and 087 from 'quick' groupStefan Hajnoczi1-2/+2
The 'quick' group in qemu-iotests are not allowed to run QEMU since we don't know which targets are available. In other words, they may only use qemu-img, qemu-io, and qemu-nbd. Drop 085 and 087 from the 'quick' group since they run QEMU. This makes "make check-block" pass again. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14qemu-iotests: add 083 NBD client disconnect testsStefan Hajnoczi3-0/+293
This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14tests: add nbd-fault-injector.py utilityStefan Hajnoczi1-0/+264
The nbd-fault-injector.py script is a special kind of NBD server. It throws away all writes and produces zeroes for reads. Given a list of fault injection rules, it can simulate NBD protocol errors and is useful for testing NBD client error handling code paths. See the patch for documentation. This scripts is modelled after Kevin Wolf <kwolf@redhat.com>'s blkdebug block driver. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14blockdev: Refuse to open encrypted image unless pausedMarkus Armbruster2-1/+27
Opening an encrypted image takes an additional step: setting the key. Between open and the key set, the image must not be used. We have some protection against accidental use in place: you can't unpause a guest while we're missing keys. You can, however, hot-plug block devices lacking keys into a running guest just fine, or insert media lacking keys. In the latter case, notifying the guest of the insert is delayed until the key is set, which may suffice to protect at least some guests in common usage. This patch makes the protection apply in more cases, in a rather heavy-handed way: it doesn't let you open encrypted images unless we're in a paused state. It doesn't extend the protection to users other than the guest (block jobs?). Use of runstate_check() from block.c is disgusting. Best I can do right now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13iotests: Test corruption during COW requestMax Reitz2-0/+41
Extend test file 060 by a test case for corruption occuring concurrently to a COW request. QEMU should not crash but rather return an appropriate error message. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-07block: qemu-iotests 085 - live snapshots testsJeff Cody3-0/+248
This adds tests for live snapshots, both through the single snapshot command, and the transaction group snapshot command. The snapshots are done through the QMP interface, using the following commands for snapshots: Single snapshot: { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'...', 'format': 'qcow2' } }" Group snapshot: { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': '...' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': '...' } } ] } } Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06block: Fix error path segfault in bdrv_open()Kevin Wolf2-0/+24
Using an invalid option for a block device that is opened with BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver name in the error message, qemu dereferenced it: $ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar Segmentation fault (core dumped) With this patch applied, the expected error message is printed: $ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't support the option 'foo' Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-03-06qemu-iotests: Test a few blockdev-add error casesKevin Wolf3-0/+163
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-03-05qemu-iotests: Test progress output for conversionKevin Wolf3-0/+84
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-28discard rbd error output when not relevant in qemu-iotestsLoic Dachary1-1/+1
Suppress rbd progress messages with --no-progress so they are not confused with an error output when comparing test results ( progress is displayed on stderr ). Signed-off-by: Loic Dachary <loic@dachary.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-28qemu-io-test: Disable Quorum test when not compiled in.Benoît Canet1-0/+3
Quorum is not compiled by default: make the quorum 081 test aware of this. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-28qmp: Make Quorum error events more palatable.Benoît Canet1-1/+1
Insert quorum QMP events documentation alphabetically. Also change the "ret" errno value by an optional "error" being an strerror(-ret) in the QUORUM_REPORT_BAD qmp event. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-28qemu-iotests: add more tests to the "quick" groupPaolo Bonzini1-17/+17
None of these needs QEMU_PROG, and they all take but a few seconds. We need to point the launching script to qemu-nbd, though. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-21iotests: Mixed quorum child device specificationsMax Reitz2-0/+66
Add a test case to test 081 for mixing full option dicts and reference strings of specifying the quorum child block devices through QMP. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21quorum: Add unit test.Benoît Canet3-0/+130
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21qemu-iotests: Check qemu-img command line parsingKevin Wolf3-0/+738
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21vmdk: correctly propagate errorsPaolo Bonzini1-4/+2
Now that we can return the "right" errors, use the Error** parameter to pass them back instead of just printing them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21vmdk: do not try opening a file as both image and descriptorPaolo Bonzini1-2/+2
This prepares for propagating errors from vmdk_open_sparse and vmdk_open_desc_file up to the caller of vmdk_open. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-23 23:54:26 +0000