| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
|
|
We are going to drop group file. Define group in tests as a preparatory
step.
The patch is generated by
cd tests/qemu-iotests
grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.
Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The NBD spec says that clients should not try to write/trim to
an export advertised as read-only by the server. But we failed
to check that, and would allow the block layer to use NBD with
BDRV_O_RDWR even when the server is read-only, which meant we
were depending on the server sending a proper EPERM failure for
various commands, and also exposes a leaky abstraction: using
qemu-io in read-write mode would succeed on 'w -z 0 0' because
of local short-circuiting logic, but 'w 0 0' would send a
request over the wire (where it then depends on the server, and
fails at least for qemu-nbd but might pass for other NBD
implementations).
With this patch, a client MUST request read-only mode to access
a server that is doing a read-only export, or else it will get
a message like:
can't open device nbd://localhost:10809/foo: request for write access conflicts with read-only export
It is no longer possible to even attempt writes over the wire
(including the corner case of 0-length writes), because the block
layer enforces the explicit read-only request; this matches the
behavior of qcow2 when backed by a read-only POSIX file.
Fix several iotests to comply with the new behavior (since
qemu-nbd of an internal snapshot, as well as nbd-server-add over QMP,
default to a read-only export, we must tell blockdev-add/qemu-io to
set up a read-only client).
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.
If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).
This updates those tests that did not have a cleanup in qemu-iotests.
(I swapped spaces for tabs in test 102 as well)
Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com
|
|
The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
drop this variable from the tests.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Describe in a little more detail what the test is supposed to achieve.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
IDE is only implemented by very few architectures (mostly PC). The
test doesn't actually need a block device attached to the
BlockBackend, so just drop it and adjust the reference output
accordingly.
Fixes: 16dee418 ("iotests: Add test for eject under NBD server")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch adds a test for ejecting the BlockBackend an NBD server is
connected to (the NBD server is supposed to stop).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
