aboutsummaryrefslogtreecommitdiff
path: root/tests/pflash-cfi02-test.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-02hw/block/pflash_cfi02: Implement erase suspend/resumeStephen Checkoway1-0/+110
During a sector erase (but not a chip erase), the embeded erase program can be suspended. Once suspended, the sectors not selected for erasure may be read and programmed. Autoselect mode is allowed during erase suspend mode. Presumably, CFI queries are similarly allowed so this commit allows them as well. Since guest firmware can use status bits DQ7, DQ6, DQ3, and DQ2 to determine the current state of sector erasure, these bits are properly implemented. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-10-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Implement multi-sector eraseStephen Checkoway1-9/+61
After two unlock cycles and a sector erase command, the AMD flash chips start a 50 us erase time out. Any additional sector erase commands add a sector to be erased and restart the 50 us timeout. During the timeout, status bit DQ3 is cleared. After the time out, DQ3 is asserted during erasure. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-9-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Fix CFI in autoselect modeStephen Checkoway1-0/+39
After a flash device enters CFI mode from autoselect mode, the reset command returns the device to autoselect mode. An additional reset command is necessary to return to read array mode. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-7-stephen.checkoway@oberlin.edu> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Implement nonuniform sector sizesStephen Checkoway1-39/+118
Some flash chips support sectors of different sizes. For example, the AMD AM29LV160DT has 31 64 kB sectors, one 32 kB sector, two 8 kB sectors, and a 16 kB sector, in that order. The AM29LV160DB has those in the reverse order. The `num-blocks` and `sector-length` properties work exactly as they did before: a flash device with uniform sector lengths. To get non-uniform sector lengths for up to four regions, the following properties may be set - region 0. `num-blocks0` and `sector-length0`; - region 1. `num-blocks1` and `sector-length1`; - region 2. `num-blocks2` and `sector-length2`; and - region 3. `num-blocks3` and `sector-length3`. If the uniform and nonuniform properties are set, then both must specify a flash device with the same total size. It would be better to disallow both being set, or make `num-blocks0` and `sector-length0` alias `num-blocks` and `sector-length`, but that would make testing currently impossible. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased, add assert() on pri_offset] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02tests/pflash-cfi02: Refactor to support testing multiple configurationsPhilippe Mathieu-Daudé1-99/+267
Introduce the FlashConfig structure, to be able to run the same set of tests on different flash models/configurations. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Fix command address comparisonStephen Checkoway1-2/+10
Most AMD commands only examine 11 bits of the address. This masks the addresses used in the comparison to 11 bits. The exceptions are word or sector addresses which use offset directly rather than the shifted offset, boff. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-4-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02tests/pflash-cfi02: Add test for supported CFI commandsStephen Checkoway1-0/+225
Test the AMD command set for parallel flash chips. This test uses an ARM musicpal board with a pflash drive to test the following list of currently-supported commands. - Autoselect - CFI - Sector erase - Chip erase - Program - Unlock bypass - Reset Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-2-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: reworded the patch subject, g_assert_cmpint -> cmphex] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
generated by cgit v1.1 at 2024-11-02 22:02:15 +0000