aboutsummaryrefslogtreecommitdiff
path: root/tests/libqtest.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-04tests/libqtest: Print error instead of aborting when env variable is missingThomas Huth1-1/+4
When you currently try to run a test directly from the command line without setting the QTEST_QEMU_BINARY environment variable first, you are presented with an unhelpful assertion message like this: ERROR:tests/libqtest.c:163:qtest_init_without_qmp_handshake: assertion failed: (qemu_binary != NULL) Aborted (core dumped) Let's replace the assert() with a more user friendly error message instead. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-09test-qga: Actually test 0xff sync bytesEric Blake1-0/+8
Commit 62c39b3 introduced test-qga, and at face value, appears to be testing the 'guest-sync' behavior that is recommended for guests in sending 0xff to QGA to force the parser to reset. But this aspect of the test has never actually done anything: the qmp_fd() call chain converts its string argument into QObject, then converts that QObject back to the actual string that is sent over the wire - and the conversion process silently drops the 0xff byte from the string sent to QGA, thus never resetting the QGA parser. An upcoming patch will get rid of the wasteful round trip through QObject, at which point the string in test-qga will be directly sent over the wire. But fixing qmp_fd() to actually send 0xff over the wire is not all we have to do - the actual QMP parser loudly complains that 0xff is not valid JSON, and sends an error message _prior_ to actually parsing the 'guest-sync' or 'guest-sync-delimited' command. With 'guest-sync', we cannot easily tell if this error message is a result of our command - which is WHY we invented the 'guest-sync-delimited' command. So for the testsuite, fix things to only check 0xff behavior on 'guest-sync-delimited', and to loop until we've consumed all garbage prior to the requested delimiter, which is compatible with the documented actions that a real QGA client is supposed to do. Ideally, we'd fix the QGA JSON parser to silently ignore 0xff rather than sending an error message back, at which point we could enhance this test for 'guest-sync' as well as for 'guest-sync-delimited'. But for the sake of this patch, our testing of 'guest-sync' is no worse than it was pre-patch, because we have never been sending 0xff over the wire in the first place. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-11-eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [Additional comment squashed in, along with matching commit message update] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-26libqtest: Add a generic function to run a callback function for every machineThomas Huth1-0/+30
Some tests need to run single tests for every available machine of the current QEMU binary. To avoid code duplication, let's extract this code that deals with 'query-machines' into a separate function. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-3-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26libqtest: Ignore QMP events when parsing the response for HMP commandsThomas Huth1-0/+6
When running certain HMP commands (like "device_del") via QMP, we can sometimes get a QMP event in the response first, so that the "g_assert(ret)" statement in qtest_hmp() triggers and the test fails. Fix this by ignoring such QMP events while looking for the real return value from QMP. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-2-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Added note to qtest_hmp/qtest_hmpv's header description to say it discards events
2017-04-03tests/libqtest.c: Delete possible stale unix socketsPeter Maydell1-0/+8
Occasionally if a test crashes or is interrupted by the user at the wrong moment it could leave behind a stale UNIX socket in /tmp/. This will then cause a subsequent test run to fail spuriously with tests/libqtest.c:70:init_socket: assertion failed (ret != -1): (-1 != -1) if it happens to reuse the same PID. Defend against this by deleting any stray stale socket before trying to open the new ones for this test. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1490963801-27870-1-git-send-email-peter.maydell@linaro.org
2017-03-07libqtest: Fix qmp() & friends to abort on JSON parse errorsMarkus Armbruster1-1/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1488317230-26248-10-git-send-email-armbru@redhat.com>
2017-03-07qobject: Propagate parse errors through qobject_from_jsonv()Markus Armbruster1-1/+1
The next few commits will put the errors to use where appropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1488317230-26248-9-git-send-email-armbru@redhat.com>
2017-03-05qmp-test: New, covering basic QMP protocolMarkus Armbruster1-5/+12
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-4-git-send-email-armbru@redhat.com>
2017-03-05libqtest: Work around a "QMP wants a newline" bugMarkus Armbruster1-3/+9
The next commit is going to add a test that calls qmp("null"). Curiously, this hangs. Here's why. qmp_fd_sendv() doesn't send newlines. Not even when @fmt contains some. At first glance, the QMP parser seems to be fine with that. However, it turns out that it fails to react to input until it sees either a newline, an object or an array. To reproduce, feed to a QMP monitor like this: $ echo -n 'null' | socat UNIX:/work/armbru/images/test-qmp STDIO {"QMP": {"version": {"qemu": {"micro": 50, "minor": 8, "major": 2}, "package": " (v2.8.0-1195-gf84141e-dirty)"}, "capabilities": []}} No output after the greeting. Add a newline: $ echo 'null' | socat UNIX:/work/armbru/images/test-qmp STDIO {"QMP": {"version": {"qemu": {"micro": 50, "minor": 8, "major": 2}, "package": " (v2.8.0-1195-gf84141e-dirty)"}, "capabilities": []}} {"error": {"class": "GenericError", "desc": "Expected 'object' in QMP input"}} Correct output for input 'null'. Add an object instead: $ echo -n 'null { "execute": "qmp_capabilities" }' | socat UNIX:qmp-socket STDIO {"QMP": {"version": {"qemu": {"micro": 50, "minor": 8, "major": 2}, "package": " (v2.8.0-1195-gf84141e-dirty)"}, "capabilities": []}} {"error": {"class": "GenericError", "desc": "Expected 'object' in QMP input"}} {"return": {}} Also correct output. Work around this QMP bug by having qmp_fd_sendv() append a newline. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-3-git-send-email-armbru@redhat.com>
2017-03-01glib-compat: add g_test_add_data_func_full fallbackMarc-André Lureau1-10/+0
Move the fallback from qtest_add_data_func_full() to glib-compat. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-02-22libqtest: Clean up qmp_response() a bitMarkus Armbruster1-2/+2
Use qobject_to_qdict() instead of a type cast. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487363905-9480-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-12libqtest: handle zero length memwrite/memreadGreg Kurz1-1/+11
Some recently added tests pass a zero length to qtest_memwrite(). Unfortunately, the qtest protocol doesn't implement an on-the-wire syntax for zero-length writes and the current code happily sends garbage to QEMU. This causes intermittent failures. It isn't worth the pain to enhance the protocol, so this patch simply fixes the issue by "just return, doing nothing". The same fix is applied to qtest_memread() since the issue also exists in the QEMU part of the "memread" command. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 148412457273.22750.983275587432075569.stgit@bahia Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-11-14libqtest: add qmp_eventwait_refJohn Snow1-3/+10
Wait for an event, but return a copy so we can investigate parameters. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-3-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-10-14qtest: ask endianness of the target in qtest_init()Laurent Vivier1-45/+23
The target endianness is not deduced anymore from the architecture name but asked directly to the guest, using a new qtest command: "endianness". As it can't change (this is the value of TARGET_WORDS_BIGENDIAN), we store it to not have to ask every time we want to know if we have to byte-swap a value. Signed-off-by: Laurent Vivier <lvivier@redhat.com> CC: Greg Kurz <groug@kaod.org> CC: David Gibson <david@gibson.dropbear.id.au> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23tests: add RTAS command in the protocolLaurent Vivier1-0/+10
Add a first test to validate the protocol: - rtas/get-time-of-day compares the time from the guest with the time from the host. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-08tests: add qtest_add_data_func_fullMarc-André Lureau1-0/+19
Allows one to specify a destroy function for the test data. Add a fallback using glib g_test_add_vtable() internal function, whose signature changed over time. Tested with glib 2.22, 2.26 and 2.48, which according to git log should be enough to cover all variations. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-16tests: fix libqtest socket timeoutsAndrea Arcangeli1-1/+1
I kept getting timeouts and unix socket accept failures under high load, the patch fixes it. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Message-id: 1465816605-29488-6-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-6-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-07tests: Remove unnecessary glib.h includesPeter Maydell1-1/+0
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-02-16tests: Clean up includesPeter Maydell1-10/+2
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2015-12-04tests: Use proper functions types instead of void (*fn)Markus Armbruster1-4/+10
We have several function parameters declared as void (*fn). This is just a stupid way to write void *, and the only purpose writing it like that could serve is obscuring the sin of bypassing the type system without need. The original sin is commit 49ee359: its qtest_add_func() is a wrapper for g_test_add_func(). Fix the parameter type to match g_test_add_func()'s. This uncovers type errors in ide-test.c; fix them. Commit 7949c0e faithfully repeated the sin for qtest_add_data_func(). Fix it the same way, along with a harmless type error uncovered in vhost-user-test.c. Commit 063c23d repeated it for qtest_add_abrt_handler(). The screwy parameter gets assigned to GHook member func, so change its type to match. Requires wrapping kill_qemu() to keep the type checker happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib] Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-11-26qjson: store tokens in a GQueuePaolo Bonzini1-1/+1
Even though we still have the "streamer" concept, the tokens can now be deleted as they are read. While doing so convert from QList to GQueue, since the next step will make tokens not a QObject and we will have to do the conversion anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-10-24qtest: add qtest_add_abrt_handler()Marc-André Lureau1-13/+24
Allow a test to add abort handlers, use GHook for all handlers. There is currently no way to remove a handler, but it could be later added if needed. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-19qtest: add a few fd-level qmp helpersMarc-André Lureau1-4/+41
Add a few functions to interact with qmp via a simple fd. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-09libqtest: New hmp() & friendsMarkus Armbruster1-0/+37
New convenience function hmp() to facilitate use of human-monitor-command in tests. Use it to simplify its existing uses. To blend into existing libqtest code, also add qtest_hmpv() and qtest_hmp(). That, and the egregiously verbose GTK-Doc comment format make this patch look bigger than it is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
2015-10-09libqtest: Clean up unused QTestState member sigact_oldMarkus Armbruster1-1/+0
Unused since commit d766825. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1443689999-12182-6-git-send-email-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-05-22qtest: pre-buffer hex nibsJohn Snow1-3/+5
Instead of converting each byte one-at-a-time and then sending each byte over the wire, use sprintf() to pre-compute all of the hex nibs into a single buffer, then send the entire buffer all at once. This gives a moderate speed boost to memread() and memwrite() functions. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1431021095-7558-2-git-send-email-jsnow@redhat.com
2015-05-22qtest: add memset to qtest protocolJohn Snow1-7/+1
Previously, memset was just a frontend to write() and only stupidly sent the pattern many times across the wire. Let's not discuss who stupidly wrote it like that in the first place. (Hint: It was me.) Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-4-git-send-email-jsnow@redhat.com
2015-05-22qtest: Add base64 encoded read/writeJohn Snow1-0/+31
For larger pieces of data that won't need to be debugged and viewing the hex nibbles is unlikely to be useful, we can encode data using base64 instead of encoding each byte as %02x, which leads to some space savings and faster reads/writes. For now, the default is left as hex nibbles in memwrite() and memread(). For the purposes of making qtest io easier to read and debug, some callers may want to specify using the old encoding format for small patches of data where the savings from base64 wouldn't be that profound. memwrite/memread use a data encoding that takes 2x the size of the original buffer, but base64 uses "only" (4/3)x, so for larger buffers we can save a decent amount of time and space. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-3-git-send-email-jsnow@redhat.com
2015-04-28qtest: Add assertion that required environment variable is setEd Maste1-0/+1
Signed-off-by: Ed Maste <emaste@freebsd.org> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1427911244-22565-1-git-send-email-emaste@freebsd.org Signed-off-by: John Snow <jsnow@redhat.com>
2015-04-28libqtest: add qmp_asyncJohn Snow1-1/+29
Add qmp_async, which lets us send QMP commands asynchronously. This is useful when we want to send commands that will trigger event responses, but we don't know in what order to expect them. Sometimes the event responses may arrive even before the command confirmation will show up, so it is convenient to leave the responses in the stream. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-5-git-send-email-jsnow@redhat.com
2015-04-28libqtest: add qmp_eventwaitJohn Snow1-0/+16
Allow the user to poll until a desired interrupt occurs. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com
2015-03-30qtest: Add qtest_add_data_func() wrapper functionAndreas Färber1-0/+7
It calls g_test_add_data_func() with a path supplemented by the architecture, like qtest_add_func() does. Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-09-08tests: Add virtio device initializationMarc Marí1-0/+48
Add functions to read and write virtio header fields. Add status bit setting in virtio-blk-device. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-28libqtest: launch QEMU with QEMU_AUDIO_DRV=noneStefan Hajnoczi1-0/+1
No test case actually uses the audio backend. Disable audio to prevent warnings on hosts with no sound hardware present: GTESTER check-qtest-aarch64 sdl: SDL_OpenAudio failed sdl: Reason: No available audio device sdl: SDL_OpenAudio failed sdl: Reason: No available audio device audio: Failed to create voice `lm4549.out' Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-15libqtest: add QTEST_LOG for debugging qtest testcasesMarc Marí1-0/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15libqtest: Correct small memory leak.John Snow1-0/+1
Fixes a small memory leak inside of libqtest. After we produce a test path and glib copies the string for itself, we should clean up our temporary copy. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15qtest: Adding qtest_memset and qmemset.John Snow1-0/+12
Currently, libqtest allows for memread and memwrite, but does not offer a simple way to zero out regions of memory. This patch adds a simple function to do so. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15libqtest: add QTEST_LOG for debugging qtest testcasesPaolo Bonzini1-1/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01libqtest: escape strings in QMP commands, fix leakPaolo Bonzini1-10/+37
libqtest is using g_strdup_printf to format QMP commands, but this does not work if the argument strings need to be escaped. Instead, use the fancy %-formatting functionality of QObject. The only change required in tests is that strings have to be formatted as %s, not '%s' or \"%s\". Luckily this usage of parameterized QMP commands is not that frequent. The leak is in socket_sendf. Since we are extracting the send loop to a new function, fix it now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05qtest: Be paranoid about accept() addrlen argumentAndreas Färber1-1/+1
POSIX specifies that address_len shall on output specify the length of the stored address; it does not however specify whether it may get updated on failure as well to, e.g., zero. In case EINTR occurs, re-initialize the variable to the desired value. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-05qtest: Add error reporting to socket_accept()Andreas Färber1-0/+3
We're not using the GLib infrastructure here, to allow cleaning up the sockets. Still, knowing why a certain test run failed can be valuable. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-05qtest: Assure that init_socket()'s listen() does not failAndreas Färber1-1/+2
In practice this seems very unlikely, so cleanup is neglected, as done for bind(). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-31qtest: Factor out qtest_qmp_receive()Andreas Färber1-5/+10
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-31qtest: Keep list of qtest instances for SIGABRT handlerStefan Hajnoczi1-10/+37
Keep track of active qtest instances so we can kill them when the test aborts. This ensures no QEMU processes are left running after test failure. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-31Revert "qtest: Fix crash if SIGABRT during qtest_init()"Stefan Hajnoczi1-2/+1
It turns out there are test cases that use multiple libqtest instances. We cannot use a global qtest instance in the SIGABRT handler. This reverts commit cb201b4872f16dfbce63f8648b2584631e2e965f. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13qtest: Fix crash if SIGABRT during qtest_init()Stefan Hajnoczi1-1/+2
If an assertion fails during qtest_init() the SIGABRT handler is invoked. This is the correct behavior since we need to kill the QEMU process to avoid leaking it when the test dies. The global_qtest pointer used by the SIGABRT handler is currently only assigned after qtest_init() returns. This results in a segfault if an assertion failure occurs during qtest_init(). Move global_qtest assignment inside qtest_init(). Not pretty but let's face it - the signal handler depends on global state. Reported-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell1-2/+11
into staging QOM/QTest infrastructure fixes and device conversions * QTest cleanups and test cases for some virtio devices * QTest for sPAPR PCI host bridge * qom-test now tests reading all properties beneath /machine * QOM API leak fixes * QOM cleanups for SSI devices * QOM conversion of QEMUMachine * QOM realize for buses * sPAPR PCI bus name change # gpg: Signature made Thu 13 Mar 2014 00:22:40 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (31 commits) libqtest: Fix possible deadlock in qtest initialization pci: Move VMState registration/unregistration to QOM realize/unrealize qdev: Realize buses on device realization qdev: Prepare realize/unrealize hooks for BusState tests: Add spapr-pci-host-bridge qtest virtio-serial-port: Convert to QOM realize/unrealize virtio-console: QOM cast cleanup for VirtConsole tests: Add virtio-console qtest tests: Add virtio-serial qtest tests: Add virtio-scsi qtest tests: Add virtio-rng qtest tests: Add virtio-balloon qtest tests: Add virtio-blk qtest tests: Clean up IndustryPack TPCI200 gcov paths qom-test: Test QOM properties hw/boards: Convert current_machine to MachineState vl: Use MachineClass instead of global QEMUMachine list hw/core: Introduce QEMU machine as QOM object qdev-monitor-test: Don't test human-readable error message qdev-monitor-test: Simplify using g_assert_cmpstr() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-13libqtest: Avoid inline varargs functionsPeter Maydell1-0/+20
Older versions of gcc (eg 4.6) can't handle varargs functions declared inline for anything other than completely trivial uses, and complain: tests/qom-test.c: In function 'qmp': tests/libqtest.h:359:60: sorry, unimplemented: function 'qmp' can never be inlined because it uses variable argument lists Avoid this problem by putting the functions into libqtest.c instead of using inline definitions in libqtest.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2014-03-13libqtest: Fix possible deadlock in qtest initializationMarcel Apfelbaum1-2/+11
'socket_accept' waits for QEMU to init its unix socket. If QEMU encounters an error during command line parsing, it can exit before initializing the communication channel. Using a timeout for sockets fixes the issue. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-19qtest: kill QEMU process on g_assert() failureStefan Hajnoczi1-6/+25
The QEMU process stays running if the test case fails. This patch fixes the leak by installing a SIGABRT signal handler which invokes qtest_end(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 04:58:44 +0000