aboutsummaryrefslogtreecommitdiff
path: root/tests/libqos
AgeCommit message (Collapse)AuthorFilesLines
2015-04-30misc: Fix new collection of typosStefan Weil1-2/+2
All of them were reported by codespell. Most typos are in comments, one is in an error message. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-28libqos: add blkdebug_prepare_scriptJohn Snow2-0/+23
Pull this helper out of ide-test and into libqos, to be shared with ahci-test. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-6-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: Allow override of default CLI optionsJohn Snow2-0/+6
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-3-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: test different disk sectorsJohn Snow2-6/+8
Test sector offset 0, 1, and the last sector(s) in LBA28 and LBA48 modes. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: add qcow2 support to ahci-testJohn Snow2-0/+46
This will enable the testing of high offsets without wasting a lot of disk space, and does not impact the previous tests. mkimg and mkqcow2 are added to libqos for other tests. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com
2015-03-10libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.cMarc Marí1-4/+12
The MSIX interrupt was always acked without checking its value, which caused a race condition. If the ISR was raised between the read and the acking, the ISR was never detected and it timed out. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com> Tested-by: John Snow <jsnow@redhat.com> Message-id: 1424795655-16952-1-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos/ahci: add ahci command helpersJohn Snow2-0/+47
ahci_command_set_flags: Set additional flags in the command header. ahci_command_clr_flags: Clear flags from the command header. ahci_command_set_offset: Change the IO sector from 0. ahci_command_adjust: Adjust many values simultaneously. To be used to adjust the command header if the default values/guesses were incorrect or undesirable. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> [ kwolf: Fixed conflicting prototype for ahci_command_adjust() ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos/ahci: Zero-fill AHCI headersJohn Snow1-1/+1
Even though it's just the reserved space, make sure they're zeroes. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Add virtio MMIO supportMarc Marí2-0/+244
Add virtio MMIO support. Add virtio-blk-test MMIO test case. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-6-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Add malloc genericMarc Marí2-0/+60
This malloc is a basic interface implementation that works for any platform. It should be replaced in the future for a real malloc implementation for each of the platforms. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-5-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Remove PCI assumptions in constants of virtio driverMarc Marí2-27/+27
Convert PCI-specific constants names of libqos virtio driver. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Change use of pointers to uint64_t in virtioMarc Marí3-21/+23
Convert use of pointers in functions of virtio to uint64_t in order to make it platform-independent. Add casting from pointers (in PCI functions) to uint64_t and vice versa through uintptr_t. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-16libqos/ahci: Add ahci_clean_memJohn Snow4-0/+25
Clean up guest memory being used in ahci_clean_mem, to be called during ahci_shutdown. With all guest memory leaks removed, add an option to the allocator to throw an assertion if a leak occurs. This test adds some sanity to both the AHCI library and the allocator. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-18-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci_ioJohn Snow2-0/+27
ahci_io is a wrapper around ahci_guest_io that takes a pointer to host memory instead, and will create a guest memory buffer and copy the data to/from as needed and as appropriate for a read/write command, such that after a read, the guest data will be in a host buffer, and for a write, the data will be transmitted to guest memory prior to the block operation. Now that we have all the syntactic sugar functions in place for AHCI, we can convert the identify test to be very, very short. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-17-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_guest_ioJohn Snow2-0/+17
ahci_guest_io is a shorthand function that will, in one shot, execute a data command on the guest to the specified guest buffer location, in the requested amount. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command size settersJohn Snow2-0/+26
Adds setters for size, prd_size and both via set_sizes. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command verifyJohn Snow2-0/+16
Helps to verify that a command completed successfully. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command functionsJohn Snow2-0/+220
This patch adds the AHCICommand structure, and a set of functions to operate on the structure. ahci_command_create - Initialize and create a new AHCICommand in memory ahci_command_free - Destroy this object. ahci_command_set_buffer - Set where the guest memory DMA buffer is. ahci_command_commit - Write this command to the AHCI HBA. ahci_command_issue - Issue the committed command synchronously. ahci_command_issue_async - Issue the committed command asynchronously. ahci_command_wait - Wait for an asynchronous command to finish. ahci_command_slot - Get the number of the command slot we committed to. Helpers: size_to_prdtl - Calculate the required minimum PRDTL size from a buffer size. ahci_command_find - Given an ATA command mnemonic, look it up in the properties table to obtain info about the command. command_header_init - Initialize the command header with sane values. command_table_init - Initialize the command table with sane values. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/ahci.c:598:3: warning: redefinition of typedef 'AHCICommand' is a C11 feature [-Wtypedef-redefinition] } AHCICommand; I have replaced typedef struct ... AHCICommand; with struct ... ; --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ide cmd propertiesJohn Snow1-0/+39
Add a structure that defines some properties of various IDE commands. These will be used to simplify the interface to the libqos AHCI calls, lessening the redundancy of specifying and respecifying properties of commands to various helper functions. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: add ahci_write_fisJohn Snow2-1/+16
Similar to ahci_set_command_header, add a helper that takes an in-memory representation of a command FIS and writes it to guest memory, handling endianness as-needed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Demagic ahci tests.John Snow1-0/+53
Add human-readable command names and other miscellaneous #defines to help make the code more readable. Some of these definitions are not yet used in this current series, but for convenience and sanity they have been lumped together here, as it's more trouble than it is worth in a test suite to hand-pick, one-by-one, which preprocessor definitions are useful per-each test. These definitions include: ATA Command Mnemonics Current expected AHCI sector size FIS magic bytes REG_H2D_FIS flags Command Header flags Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add cmd response sanity check helpersJohn Snow2-17/+84
This patch adds a few helpers to help sanity-check the response of the AHCI device after a command. ahci_d2h_check_sanity inspects the D2H Register FIS, ahci_pio_check_sanity inspects the PIO Setup FIS, and ahci_cmd_check_sanity inspects the command header. To support the PIO sanity check, a new structure is added for the PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their members renamed slightly to condense reserved members into fewer fields; and LBA fields are now represented by arrays of 8 byte chunks instead of independent variables. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add port_check_nonbusy helperJohn Snow2-0/+19
A simple helper that asserts a given port is not busy processing any commands via the TFD, Command Issue and SACT registers. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_interrupts helperJohn Snow2-0/+16
A helper that compares a given port's current interrupts and checks them against a supplied list of expected interrupt bits, and throws an error if they do not match. The helper then resets the requested interrupts on this port, and asserts that the interrupt register is now empty. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_error helperJohn Snow2-0/+23
ahci_port_check_error checks a given port's error registers and asserts that everything from the port-level view is still OK. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add command header helpersJohn Snow2-5/+87
Adds command header helper functions: -ahci_command_header_set -ahci_command_header_get, -ahci_command_destroy, and -ahci_cmd_pick These helpers help to quickly manage the command header information in the AHCI device. ahci_command_header_set and get will store or retrieve an AHCI command header, respectively. ahci_cmd_pick chooses the first available but least recently used command slot to allow us to cycle through the available command slots. ahci_command_destroy obliterates all information contained within a given slot's command header, and frees its associated command table, but not its DMA buffer! Lastly, the command table pointer fields (dba and dbau) are merged into a single 64bit value to make managing 64bit tests simpler. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: rename 'Command' to 'CommandHeader'John Snow1-4/+3
The structure name is a bit of a misnomer; the structure currently named command is actually the commandheader. A future patch in this series will add an actual "Command" structure, so we'll rename it now before the rest of the functions in this series try to use it. In addition, rename the "b1" and "b2" fields to be a unified uint16_t named "flags." Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_clear helperJohn Snow2-0/+17
Add a helper that assists in clearing out potentially old error and FIS information from an AHCI port's data structures. This ensures we always start with a blank slate for interrupt and FIS receipt information. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_select helperJohn Snow2-0/+28
This helper identifies which port of the AHCI HBA has a device we may run tests on. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: create libqos/ahci.cJohn Snow2-1/+279
With global state removed, code responsible for booting up, verifying, and initializing the AHCI HBA is extracted and inserted into libqos/ahci.c, which would allow for other qtests in the future to quickly grab a meaningfully initialized reference to an AHCI HBA. Even without other users, functionalizing and isolating the code assists future AHCI tests that exercise Q35 migration. For now, libqos/ahci.o will be PC-only, but can be expanded into something arch-agnostic in the future, if needed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Bookmark FB and CLB pointersJohn Snow1-0/+6
Instead of re-querying the AHCI device for the FB and CLB buffers, save the pointer we gave to the device during initialization and reference these values instead. [Peter Maydell <peter.maydell@linaro.org> reported the following clang compiler warnings: tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("CLB: 0x%08lx", ahci->port[i].clb); tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("FB: 0x%08lx", ahci->port[i].fb); The commit moved from uint32_t to uint64_t, so PRIx64 should be used for the format specifier. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Functional register helpersJohn Snow1-0/+63
Introduce a set of "static inline" register helpers that are intended to replace the current set of macros with more functional versions that are better suited to inclusion in libqos than porcelain macros. As a stopgap measure before eliminating the porcelain macros, define them to use the new functions defined in the ahci.h header. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: finalize AHCIQState consolidationJohn Snow1-5/+4
Move barsize, ahci_fingerprint and capabilities registers into the AHCIQState object, removing global ahci-related state from the ahci-test.c file. More churn, less globals. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Store hba_base in AHCIQStateJohn Snow1-0/+1
Store the HBA memory base address in the new state object, to simplify function prototypes and encourage a more functional testing style. This causes a lot of churn, but this patch is as "simplified" as I could get it to be. This patch is therefore fairly mechanical and straightforward: Any case where we pass "hba_base" has been consolidated into the AHCIQState object and we pass the one unified parameter. Any case where we reference "ahci" and "hba_state" have been modified to use "ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory address, accordingly. Notes: - A needless return is removed from start_ahci_device. - For ease of reviewing, this patch can be reproduced (mostly) by: # Replace (ahci, hba_base) prototypes with unified parameter 's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/' # Replace (ahci->dev, hba_base) calls with unified parameter 's/(ahci->dev, &\?hba_base)/(ahci)/' # Replace calls to PCI config space using "ahci" with "ahci->dev" 's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/' After these, the remaining differences are easy to review by hand. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add pc specific interfaceJohn Snow4-9/+50
Create an operations structure so that the libqos interface can be architecture agnostic, and create a pc-specific interface to functions like qtest_boot. Move the libqos object in the Makefile from being ahci-test only to being linked with all tests that utilize the libqos features. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: Update QGuestAllocator to be opaqueJohn Snow3-35/+50
To avoid the architecture-specific implementations of the generic qtest allocator having to know about fields within the allocator, add a page_size setter method for users or arch specializations to use. The allocator will assume a default page_size for general use, but it can always be overridden. Since this was the last instance of code directly using properties of the QGuestAllocator object directly, modify the type to be opaque and move the structure inside of malloc.c. mlist_new, which was previously exported, is made static local to malloc.c, as it has no external users. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/malloc.c:35:3: warning: redefinition of typedef 'QGuestAllocator' is a C11 feature [-Wtypedef-redefinition] } QGuestAllocator; I converted typedef struct ... QGuestAllocator; to struct ...; --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Marc Marí <marc.mari.barcelo@gmail.com> Message-id: 1421698563-6977-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add alloc_init_flagsJohn Snow3-3/+11
Allow a generic interface to alloc_init_flags, not just through pc_alloc_init_flags. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add qtest_vbootJohn Snow2-6/+20
Add a va_list variant of the qtest_boot function. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: create libqos.cJohn Snow3-0/+79
The intent of this file is to serve as a misc. utilities file to be shared amongst tests that are utilizing libqos facilities. In a later patch, migration test helpers will be added to libqos.c that will allow simplified testing of migration cases where libqos is "Just Enough OS" for migrations testing. The addition of the AHCIQState structure will also allow us to eliminate global variables inside of qtests to manage allocators and test instances in a better, more functional way. libqos.c: - Add qtest_boot - Add qtest_shutdown libqos.h: - Create QOSState structure for allocator and QTestState. ahci-test.c: - Move qtest_boot and qtest_shutdown to libqos.c/h - Create AHCIQState to interface with new qtest_boot/shutdown prototypes - Modify tests slightly to use new types. For now, the new object file is only linked to ahci-test, because it still relies on pc architecture specific code in libqos. The next two patches will reorganize the code to be more general. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Create ahci.hJohn Snow1-0/+352
Extract defines and other information to ahci.h, to be shared with other tests if they so please. At the very least, reduce clutter in the test file itself. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: Split apart pc_alloc_initJohn Snow3-16/+22
Move the list-specific initialization over into malloc.c, to keep all of the list implementation details within the same file. The allocation and freeing of these structures are now both back within the same layer. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-13libqos: Convert malloc-pc allocator to a generic allocatorMarc Marí4-298/+308
The allocator in malloc-pc has been extracted, so it can be used in every arch. This operation showed that both the alloc and free functions can be also generic. Because of this, the QGuestAllocator has been removed from is function to wrap the alloc and free function, and now just contains the allocator parameters. As a result, only the allocator initalizer and unitializer are arch dependent. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-15tests: usb: Generic usb device hotplugIgor Mammedov2-0/+37
use usb-tablet as a hotplugged usb device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15tests: usb: Move uhci port test code to libqos/usb.cIgor Mammedov2-0/+51
Move code necessary for testing uhci port into library so it could be used by other USB tests. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15libqos: Add qpci_plug_device_test() and qpci_unplug_acpi_device_test()Igor Mammedov2-0/+52
Functions will be used for testing hot(un)plug of PCI devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-09-29libqos: use microseconds instead of iterations for virtio timeoutStefan Hajnoczi2-18/+20
Some hosts are slow or overloaded so test execution takes a long time. Test cases use timeouts to protect against an infinite loop stalling the test forever (especially important in automated test setups). Commit 6cd14054b67774cc58a51fca6660cfa1d3c08059 ("libqos virtio: Increase ISR timeout") increased the clock_step() value in an attempt to lengthen the virtio interrupt wait timeout, but timeout failures are still occuring on the Travis automated testing platform. This is because clock_step() only affects the guest's virtual time. Virtio requests can be bottlenecked on host disk I/O latency - which cannot be improved by stepping the clock, so the fix was ineffective. This patch changes the qvirtio_wait_queue_isr() and qvirtio_wait_config_isr() timeout mechanism from loop iterations to microseconds. This way the test case can specify an absolute 30 second timeout. Number of loop iterations is not a reliable timeout mechanism since the speed depends on many factors including host performance. Tests should no longer timeout on overloaded Travis instances. Cc: Marc Marí <marc.mari.barcelo@gmail.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-29libqos: improve event_index test with timeoutStefan Hajnoczi2-0/+27
The virtio event_index feature lets the device driver tell the device how many requests to process before raising the next interrupt. virtio-blk-test.c tries to verify that the device does not raise an interrupt unnecessarily. Unfortunately the test has a race condition. It spins checking for an interrupt up to 100 times and then assumes the request has finished. On a slow host the I/O request could still be in flight and the test would fail. This patch waits for the request to complete, or until a 30-second timeout is reached. If an interrupt is raised while waiting the test fails since the device was not supposed to raise interrupts. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-22ahci: add test_pci_enable to ahci-test.John Snow1-0/+6
This adds a test wherein we engage the PCI AHCI device and ensure that the memory region for the HBA functionality is now accessible. Under Q35 environments, additional PCI configuration is performed to ensure that the HBA functionality will become usable. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-12libqos virtio: Increase ISR timeoutMarc Marí1-2/+2
Increase the clock step to avoid Travis failure in some builds due to overagressive timeout. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Message-id: 1410428416-5046-1-git-send-email-marc.mari.barcelo@gmail.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08libqos: add a simple first-fit memory allocatorJohn Snow2-10/+279
Implement a simple first-fit memory allocator that attempts to keep track of leased blocks of memory in order to be able to re-use blocks. Additionally, allow the user to specify when initializing the device that upon cleanup, we would like to assert that there are no blocks in use. This may be useful for identifying problems in qtests that use more complicated set-up and tear-down routines. This functionality is used in my upcoming ahci-test v2 patch set, but I didn't see fit to enable it for any existing tests, which will continue to operate the same as they have prior. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-29 19:17:47 +0000