| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "I" bit in PIO Setup and D2H FISes is exclusively a device concept
and the irqstatus register in the controller does not matter. The SATA
spec says when it should be one; for D2H FISes in practice it is always
set, while the PIO Setup FIS has several subcases that are documented in
the patch.
Also, the PIO Setup FIS interrupt is actually generated _after_ data
has been received.
Someone should probably spend some time reading the SATA specification and
figuring out the more obscure fields in the PIO Setup FIS, but this is enough
to fix SeaBIOS booting from ATAPI CD-ROMs over an AHCI controller.
Fixes: 956556e131e35f387ac482ad7b41151576fef057
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180622165159.19863-1-pbonzini@redhat.com
[Minor edit to avoid ATAPI comment ambiguity. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The PIO Setup FIS is written in the PIO:Entry state, which comes before
the ATA and ATAPI data transfer states. As a result, the PIO Setup FIS
interrupt is now raised before DMA ends for ATAPI commands, and tests have
to be adjusted.
This is also hinted by the description of the command header in the AHCI
specification, where the "A" bit is described as
When ‘1’, indicates that a PIO setup FIS shall be sent by the device
indicating a transfer for the ATAPI command.
and also by the description of the ACMD (ATAPI command region):
The ATAPI command must be either 12 or 16 bytes in length. The length
transmitted by the HBA is determined by the PIO setup FIS that is sent
by the device requesting the ATAPI command.
QEMU, which conflates the "generator" and the "receiver" of the FIS into
one device, always uses ATAPI_PACKET_SIZE, aka 12, for the length.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
When initializing a QPCIBus, track which QTestState the bus is
associated with (so that a later patch can then explicitly use
that test state for all communication on the bus, rather than
blindly relying on global_qtest). Update the initialization
functions to take another parameter, and update all callers to
pass in state (for now, most callers get away with passing the
current global_qtest as the current state, although this required
fixing the order of initialization to ensure qtest_start() is
called before qpci_init*() in rtl8139-test, and provided an
opportunity to pass in the allocator in e1000e-test).
Touch up some allocations to use g_new0() rather than g_malloc()
while in the area, and simplify some code (all implementations
of QOSOps provide a .init_allocator() that never fails).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Removed hunk from vhost-user-test.c that is not required anymore,
fixed conflict in qtest_vboot() and adjusted qpci_init_pc() in sdhci-test]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Required for tray tests once a medium may have changed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-6-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
(1) Add START_STOP_UNIT command to ahci-test suite
(2) Add eject/start macro commands; this is not a data transfer
command so it is not well-served by the existing generic pipeline.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-5-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Sometimes we know we'll get back an error, so let's have the
test framework understand that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-4-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Commit 9ef2e93f introduced the concept of tagging ATAPI commands as
NONDATA, but this introduced a regression for certain commands better
described as CONDDATA. read_cd is such a command that both requires
a non-zero BCL if a transfer size is set, but is perfectly content to
accept a zero BCL if the transfer size is 0.
This test adds a regression test for the case where BCL and nb_sectors
are both 0.
Flesh out the CDROM tests by:
(1) Allowing the test to specify a BCL
(2) Allowing the buffer comparison test to compare a 0-size buffer
(3) Fix the BCL specification in libqos (It is LE, not BE)
(4) Add a nice human-readable message for future SCSI command additions
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-4-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The usual use model for the libqos PCI functions is to map a specific PCI
BAR using qpci_iomap() then pass the returned token into IO accessor
functions. This, and the fact that iomap() returns a (void *) which
actually contains a PCI space address, kind of suggests that the return
value from iomap is supposed to be an opaque token.
..except that the callers expect to be able to add offsets to it. Which
also assumes the compiler will support pointer arithmetic on a (void *),
and treat it as working with byte offsets.
To clarify this situation change iomap() and the IO accessors to take
a definitely opaque BAR handle (enforced with a wrapper struct) along with
an offset within the BAR. This changes both the functions and all the
callers.
There were a number of places that checked if iomap() returned non-NULL,
and or initialized it to NULL before hand. Since iomap() already assert()s
if it fails to map the BAR, these tests were mostly pointless and are
removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
In a couple of places ahci-test makes assumptions about how the tokens
returned from qpci_iomap() are formatted in ways it probably shouldn't.
First in verify_state() it uses a non-NULL token to indicate that the AHCI
device has been enabled (part of enabling is to iomap()). This changes it
to use an explicit 'enabled' flag instead.
Second, it uses the fact that the token contains a PCI address, stored when
the BAR is mapped during initialization to check that the BAR has the same
value after a migration. This changes it to explicitly read the BAR
register before and after the migration and compare.
Together, these changes will make the test more robust against changes to
the internals of the libqos PCI layer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Organize the prototypes into nice little sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-10-git-send-email-jsnow@redhat.com
|
|
add ahci_exec, which is a standard purpose flexible command dispatcher
and tester for the AHCI device. The intent is to eventually cut down on
the absurd amount of boilerplate inside of the AHCI qtest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-8-git-send-email-jsnow@redhat.com
|
|
We need to say "hello!" to our ATAPI friends
in a slightly different manner.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-4-git-send-email-jsnow@redhat.com
|
|
Add pathways to tolerate ATAPI commands.
Notably, unlike ATA, each SCSI command's layout is a little different,
so support will have to be patched in for each command as we want to
test them in e.g. ahci_command_set_sizes and ahci_command_set_offset.
For now, I'm adding support for 0x28, READ (10).
[Maintainer edit: replaced type-punning with stl_be_p(). --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-3-git-send-email-jsnow@redhat.com
|
|
Don't try to correct the endianness of NCQ commands, which do not
use any fields wider than a single byte.
This corrects the /x86_64/ahci/io/ncq/simple test (and others)
for ppc64 BE hosts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1436210229-4118-2-git-send-email-jsnow@redhat.com
|
|
Test the NCQ pathways for a simple IO RW test.
Also, test that libqos doesn't explode when
running NCQ commands :)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-16-git-send-email-jsnow@redhat.com
|
|
NCQ frames are generated a little differently than
their non-NCQ cousins. Add support for them.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-11-git-send-email-jsnow@redhat.com
|
|
NCQ commands should not / do not update the byte count
in the command header post command, so this field is
meaningless for NCQ tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-10-git-send-email-jsnow@redhat.com
|
|
Sometimes we want a command to halt the VM instead
of complete successfully, so it'd be nice to let the
libqos/ahci functions cope with such scenarios.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-2-git-send-email-jsnow@redhat.com
|
|
Test sector offset 0, 1, and the last sector(s)
in LBA28 and LBA48 modes.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
|
|
ahci_command_set_flags: Set additional flags in the command header.
ahci_command_clr_flags: Clear flags from the command header.
ahci_command_set_offset: Change the IO sector from 0.
ahci_command_adjust: Adjust many values simultaneously.
To be used to adjust the command header if the default values/guesses
were incorrect or undesirable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed conflicting prototype for ahci_command_adjust() ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Clean up guest memory being used in ahci_clean_mem, to be
called during ahci_shutdown. With all guest memory leaks removed,
add an option to the allocator to throw an assertion if a leak
occurs.
This test adds some sanity to both the AHCI library and the
allocator.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
ahci_io is a wrapper around ahci_guest_io that takes a pointer to host
memory instead, and will create a guest memory buffer and copy the data
to/from as needed and as appropriate for a read/write command, such that
after a read, the guest data will be in a host buffer, and for a write,
the data will be transmitted to guest memory prior to the block operation.
Now that we have all the syntactic sugar functions in place for AHCI,
we can convert the identify test to be very, very short.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-17-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
ahci_guest_io is a shorthand function that will, in one shot,
execute a data command on the guest to the specified guest buffer
location, in the requested amount.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Adds setters for size, prd_size and both via set_sizes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Helps to verify that a command completed successfully.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch adds the AHCICommand structure, and a set of functions to
operate on the structure.
ahci_command_create - Initialize and create a new AHCICommand in memory
ahci_command_free - Destroy this object.
ahci_command_set_buffer - Set where the guest memory DMA buffer is.
ahci_command_commit - Write this command to the AHCI HBA.
ahci_command_issue - Issue the committed command synchronously.
ahci_command_issue_async - Issue the committed command asynchronously.
ahci_command_wait - Wait for an asynchronous command to finish.
ahci_command_slot - Get the number of the command slot we committed to.
Helpers:
size_to_prdtl - Calculate the required minimum PRDTL size from
a buffer size.
ahci_command_find - Given an ATA command mnemonic, look it up in the
properties table to obtain info about the command.
command_header_init - Initialize the command header with sane values.
command_table_init - Initialize the command table with sane values.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
warning:
tests/libqos/ahci.c:598:3: warning: redefinition
of typedef 'AHCICommand' is a C11 feature
[-Wtypedef-redefinition]
} AHCICommand;
I have replaced typedef struct ... AHCICommand; with struct ... ;
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Similar to ahci_set_command_header, add a helper that takes an
in-memory representation of a command FIS and writes it to guest
memory, handling endianness as-needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Add human-readable command names and other miscellaneous #defines
to help make the code more readable.
Some of these definitions are not yet used in this current series,
but for convenience and sanity they have been lumped together here,
as it's more trouble than it is worth in a test suite to hand-pick,
one-by-one, which preprocessor definitions are useful per-each test.
These definitions include:
ATA Command Mnemonics
Current expected AHCI sector size
FIS magic bytes
REG_H2D_FIS flags
Command Header flags
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch adds a few helpers to help sanity-check the response of the
AHCI device after a command.
ahci_d2h_check_sanity inspects the D2H Register FIS,
ahci_pio_check_sanity inspects the PIO Setup FIS, and
ahci_cmd_check_sanity inspects the command header.
To support the PIO sanity check, a new structure is added for the
PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their
members renamed slightly to condense reserved members into fewer
fields; and LBA fields are now represented by arrays of 8 byte chunks
instead of independent variables.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
A simple helper that asserts a given port is not busy processing any
commands via the TFD, Command Issue and SACT registers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
A helper that compares a given port's current interrupts and checks them
against a supplied list of expected interrupt bits, and throws an error
if they do not match.
The helper then resets the requested interrupts on this port, and asserts
that the interrupt register is now empty.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
ahci_port_check_error checks a given port's error registers and asserts
that everything from the port-level view is still OK.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Adds command header helper functions:
-ahci_command_header_set
-ahci_command_header_get,
-ahci_command_destroy, and
-ahci_cmd_pick
These helpers help to quickly manage the command header information in
the AHCI device.
ahci_command_header_set and get will store or retrieve an AHCI command
header, respectively.
ahci_cmd_pick chooses the first available but least recently used
command slot to allow us to cycle through the available command slots.
ahci_command_destroy obliterates all information contained within a
given slot's command header, and frees its associated command table,
but not its DMA buffer!
Lastly, the command table pointer fields (dba and dbau) are merged into
a single 64bit value to make managing 64bit tests simpler.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The structure name is a bit of a misnomer; the structure currently named
command is actually the commandheader. A future patch in this series
will add an actual "Command" structure, so we'll rename it now before the
rest of the functions in this series try to use it.
In addition, rename the "b1" and "b2" fields
to be a unified uint16_t named "flags."
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Add a helper that assists in clearing out potentially old error and FIS
information from an AHCI port's data structures. This ensures we always
start with a blank slate for interrupt and FIS receipt information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This helper identifies which port of the
AHCI HBA has a device we may run tests on.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With global state removed, code responsible for booting up,
verifying, and initializing the AHCI HBA is extracted and
inserted into libqos/ahci.c, which would allow for other
qtests in the future to quickly grab a meaningfully initialized
reference to an AHCI HBA.
Even without other users, functionalizing and isolating the code
assists future AHCI tests that exercise Q35 migration.
For now, libqos/ahci.o will be PC-only, but can be expanded into
something arch-agnostic in the future, if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Instead of re-querying the AHCI device for the FB and CLB buffers, save
the pointer we gave to the device during initialization and reference
these values instead.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
compiler warnings:
tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("CLB: 0x%08lx", ahci->port[i].clb);
tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("FB: 0x%08lx", ahci->port[i].fb);
The commit moved from uint32_t to uint64_t, so PRIx64 should be used for
the format specifier.
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Introduce a set of "static inline" register helpers that are intended to
replace the current set of macros with more functional versions that are
better suited to inclusion in libqos than porcelain macros.
As a stopgap measure before eliminating the porcelain macros, define them
to use the new functions defined in the ahci.h header.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Move barsize, ahci_fingerprint and capabilities registers into
the AHCIQState object, removing global ahci-related state
from the ahci-test.c file.
More churn, less globals.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Store the HBA memory base address in the new state object, to simplify
function prototypes and encourage a more functional testing style.
This causes a lot of churn, but this patch is as "simplified" as I could
get it to be. This patch is therefore fairly mechanical and straightforward:
Any case where we pass "hba_base" has been consolidated into the AHCIQState
object and we pass the one unified parameter.
Any case where we reference "ahci" and "hba_state" have been modified to use
"ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory
address, accordingly.
Notes:
- A needless return is removed from start_ahci_device.
- For ease of reviewing, this patch can be reproduced (mostly) by:
# Replace (ahci, hba_base) prototypes with unified parameter
's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/'
# Replace (ahci->dev, hba_base) calls with unified parameter
's/(ahci->dev, &\?hba_base)/(ahci)/'
# Replace calls to PCI config space using "ahci" with "ahci->dev"
's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/'
After these, the remaining differences are easy to review by hand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The intent of this file is to serve as a misc. utilities file to be
shared amongst tests that are utilizing libqos facilities.
In a later patch, migration test helpers will be added to libqos.c that
will allow simplified testing of migration cases where libqos is
"Just Enough OS" for migrations testing.
The addition of the AHCIQState structure will also allow us to eliminate
global variables inside of qtests to manage allocators and test instances
in a better, more functional way.
libqos.c:
- Add qtest_boot
- Add qtest_shutdown
libqos.h:
- Create QOSState structure for allocator and QTestState.
ahci-test.c:
- Move qtest_boot and qtest_shutdown to libqos.c/h
- Create AHCIQState to interface with new qtest_boot/shutdown prototypes
- Modify tests slightly to use new types.
For now, the new object file is only linked to ahci-test, because it still
relies on pc architecture specific code in libqos. The next two patches will
reorganize the code to be more general.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Extract defines and other information to ahci.h, to be shared with other
tests if they so please.
At the very least, reduce clutter in the test file itself.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
