aboutsummaryrefslogtreecommitdiff
path: root/tcg/tcg.h
AgeCommit message (Collapse)AuthorFilesLines
2016-05-19exec: extract exec/tb-context.hPaolo Bonzini1-0/+22
TCG backends do not need most of exec-all.h; extract what they actually need to a separate file or move it directly to tcg.h. The next patch will stop including exec-all.h from everywhere. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12tcg: Clean up from 'next_tb'Sergey Fedorov1-9/+10
The value returned from tcg_qemu_tb_exec() is the value passed to the corresponding tcg_gen_exit_tb() at translation time of the last TB attempted to execute. It is a little confusing to store it in a variable named 'next_tb'. In fact, it is a combination of 4-byte aligned pointer and additional information in its two least significant bits. Break it down right away into two variables named 'last_tb' and 'tb_exit' which are a pointer to the last TB attempted to execute and the TB exit reason, correspondingly. This simplifies the code and improves its readability. Correct a misleading documentation comment for tcg_qemu_tb_exec() and fix logging in cpu_tb_exec(). Also rename a misleading 'next_tb' in another couple of places. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov1-3/+3
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Add tcg_set_insn_paramEdgar E. Iglesias1-0/+6
Add tcg_set_insn_param as a mechanism to modify an insn parameter after emiting the insn. This is useful for icount and also for embedding fault information for a specific insn. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1461931684-1867-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22tcg: pass down TranslationBlock to tcg_code_genAlex Bennée1-1/+1
My later debugging patches need access to the origin PC which is held in the TranslationBlock structure. Pass down the whole structure as it also holds the information about the code start point. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-3-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01tcg: Move definition of type TCGvLluís Vilanova1-0/+7
The target-dependant type TCGv must be defined in "tcg/tcg.h" before including the tracing helper wrappers in "tcg/tcg-op.h". It also makes more sense to define it here, where other TCG types are defined too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 145641860129.30295.17554707227384022653.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-01tcg: Add type for vCPU pointersLluís Vilanova1-0/+1
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell1-1/+1
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Implement indirect memory registersRichard Henderson1-0/+2
That is, global_mem registers whose base is another global_mem register, rather than a fixed register. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change reg_to_temp to TCGTemp pointerRichard Henderson1-3/+3
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove tcg_get_arg_str_i32/64Richard Henderson1-5/+0
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: More use of TCGReg where appropriateRichard Henderson1-4/+4
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change ts->mem_reg to ts->mem_baseRichard Henderson1-2/+2
Chain the temporaries together via pointers intstead of indices. The mem_reg value is now mem_base->reg. This will be important later. This does require that the frame pointer have a global temporary allocated for it. This is simple bar the existing reserved_regs check. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson1-8/+30
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Check for overflow via highwater markRichard Henderson1-2/+3
We currently pre-compute an worst case code size for any TB, which works out to be 122kB. Since the average TB size is near 1kB, this wastes quite a lot of storage. Instead, check for overflow in between generating code for each opcode. The overhead of the check isn't measurable and wastage is minimized. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Remove tcg_gen_code_search_pcRichard Henderson1-2/+0
It's no longer used, so tidy up everything reached by it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson1-4/+0
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Save insn data and use it in cpu_restore_state_from_tbRichard Henderson1-1/+3
We can now restore state without retranslation. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson1-0/+2
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson1-0/+1
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Allow extra data to be attached to insn_startRichard Henderson1-0/+6
With an eye toward having this data replace the gen_opc_* arrays that each target collects in order to enable restore_state_from_tb. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+4
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11softmmu: add helper function to pass through retaddrPavel Dovgalyuk1-0/+23
This patch introduces several helpers to pass return address which points to the TB. Correct return address allows correct restoring of the guest PC and icount. These functions should be used when helpers embedded into TB invoke memory operations. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-09replace spinlock by QemuMutex.KONRAD Frederic1-0/+4
spinlock is only used in two cases: * cpu-exec.c: to protect TranslationBlock * mem_helper.c: for lock helper in target-i386 (which seems broken). It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly, with an #ifdef. The #ifdef will be removed when multithreaded TCG will need the mutex as well. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com> Signed-off-by: Emilio G. Cota <cota@braap.org> [Merge Emilio G. Cota's patch to remove volatile. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson1-1/+2
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno1-1/+1
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-26cpu-defs: Move CPU_TEMP_BUF_NLONGS to tcgPeter Crosthwaite1-0/+2
The usages of this define are pure TCG and there is no architecture specific variation of the value. Localise it to the TCG engine to remove another architecture agnostic piece from cpu-defs.h. This follows on from a28177820a868eafda8fab007561cc19f41941f4 where temp_buf was moved out of the CPU_COMMON obsoleting the need for the super early definition. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <498e8e5325c1a1aff79e5bcfc28cb760ef6b214e.1433052532.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-03tci: do not use CPUArchState in tcg-target.hPaolo Bonzini1-1/+3
tcg-target.h does not use any QEMU-specific symbols, save for tci's usage of CPUArchState. Pull that up to tcg/tcg.h. This will make it possible to include tcg-target.h in cpu-defs.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Add MO_ALIGN, MO_UNALNRichard Henderson1-0/+13
These modifiers control, on a per-memory-op basis, whether unaligned memory accesses are allowed. The default setting reflects the target's definition of ALIGNED_ONLY. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson1-19/+19
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson1-0/+38
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-05tcg: optimise memory layout of TCGTempEmilio G. Cota1-12/+14
This brings down the size of the struct from 56 to 32 bytes on 64-bit, and to 20 bytes on 32-bit. This leads to memory savings: Before: $ find . -name 'tcg.o' | xargs size text data bss dec hex filename 41131 29800 88 71019 1156b ./aarch64-softmmu/tcg/tcg.o 37969 29416 96 67481 10799 ./x86_64-linux-user/tcg/tcg.o 39354 28816 96 68266 10aaa ./arm-linux-user/tcg/tcg.o 40802 29096 88 69986 11162 ./arm-softmmu/tcg/tcg.o 39417 29672 88 69177 10e39 ./x86_64-softmmu/tcg/tcg.o After: $ find . -name 'tcg.o' | xargs size text data bss dec hex filename 40883 29800 88 70771 11473 ./aarch64-softmmu/tcg/tcg.o 37473 29416 96 66985 105a9 ./x86_64-linux-user/tcg/tcg.o 38858 28816 96 67770 108ba ./arm-linux-user/tcg/tcg.o 40554 29096 88 69738 1106a ./arm-softmmu/tcg/tcg.o 39169 29672 88 68929 10d41 ./x86_64-softmmu/tcg/tcg.o Note that using an entire byte for some enums that need less than that wastes a few bits (noticeable in 32 bits, where we use 20 bytes instead of 16) but avoids extraction code, which overall is a win--I've tested several variations of the patch, and the appended is the best performer for OpenSSL's bntest by a very small margin: Before: $ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null [...] Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs): 10538.479833 task-clock (msec) # 0.999 CPUs utilized ( +- 0.38% ) 772 context-switches # 0.073 K/sec ( +- 2.03% ) 0 cpu-migrations # 0.000 K/sec ( +-100.00% ) 2,207 page-faults # 0.209 K/sec ( +- 0.08% ) 10.552871687 seconds time elapsed ( +- 0.39% ) After: $ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs): 10459.968847 task-clock (msec) # 0.999 CPUs utilized ( +- 0.30% ) 739 context-switches # 0.071 K/sec ( +- 1.71% ) 0 cpu-migrations # 0.000 K/sec ( +- 68.14% ) 2,204 page-faults # 0.211 K/sec ( +- 0.10% ) 10.473900411 seconds time elapsed ( +- 0.30% ) Suggested-by: Stefan Weil <sw@weilnetz.de> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-04-30tcg: Delete unused cpu_pc_from_tb()Peter Crosthwaite1-2/+4
No code uses the cpu_pc_from_tb() function. Delete from tricore and arm which each provide an unused implementation. Update the comment in tcg.h to reflect that this is obsoleted by synchronize_from_tb. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-13tcg: Use tcg_malloc to allocate TCGLabelRichard Henderson1-11/+5
Pre-allocating 512 of them per TB is a waste. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson1-0/+30
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Remove opcodes instead of noping them outRichard Henderson1-0/+1
With the linked list scheme we need not leave nops in the stream that we need to process later. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Put opcodes in a linked listRichard Henderson1-17/+41
The previous setup required ops and args to be completely sequential, and was error prone when it came to both iteration and optimization. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Introduce tcg_op_buf_count and tcg_op_buf_fullRichard Henderson1-0/+12
The method by which we count the number of ops emitted is going to change. Abstract that away into some inlines. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move some opcode generation functions out of lineRichard Henderson1-3/+0
Some of these functions are really quite large. We have a number of things that ought to be circularly dependent, but we duplicated code to break that chain for the inlines. This saved 25% of the code size of one of the translators I examined. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-12-17tcg: add separate monitor command to dump opcode countersMax Filippov1-0/+1
Currently 'info jit' outputs half of the information to monitor and the rest to qemu log. Dumping opcode counts to monitor as a part of 'info jit' command doesn't sound useful. Add new monitor command 'info opcount' that only dumps opcode counters. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2014-09-29tcg: Always enable TCGv type checkingRichard Henderson1-55/+34
Instead of using structures, which imply some amount of overhead on certain ABIs, use pointer types. This actually reduces the size of the binaries vs a NON-debug build on ppc64 and x86_64, due to a reduction in the number of sign-extension insns. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-05softmmu: move all load/store functions to cpu_ldst.hPaolo Bonzini1-13/+0
Unify pieces of cpu-all.h, exec-all.h, softmmu_exec.h and tcg/tcg.h into a single new header file with all helpers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Remove sizemask and flags arguments to tcg_gen_callNRichard Henderson1-2/+2
Take them from the TCGHelperInfo struct instead. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Push tcg-runtime routines into exec/helper-*Richard Henderson1-2/+0
Rather than special casing them, use the standard mechanisms for tcg helper generation. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Make call address a constant parameterRichard Henderson1-1/+1
Avoid allocating a tcg temporary to hold the constant address, and instead place it directly into the op_call arguments. At the same time, convert to the newly introduced tcg_out_call backend function, rather than invoking tcg_out_op for the call. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Require TCG_TARGET_INSN_UNIT_SIZERichard Henderson1-3/+2
Now that all backends do define TCG_TARGET_INSN_UNIT_SIZE, remove the fallback definition. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Define tcg_insn_unit for code pointersRichard Henderson1-9/+30
To be defined by the tcg backend based on the elemental unit of the ISA. During the transition, allow TCG_TARGET_INSN_UNIT_SIZE to be undefined, which allows us to default tcg_insn_unit to the current uint8_t. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Introduce byte pointer arithmetic helpersRichard Henderson1-0/+45
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson1-0/+1
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.1 at 2024-11-03 11:01:07 +0000