Age | Commit message (Collapse) | Author | Files | Lines |
|
Step two in the transition, adding the new ldst opcodes. Keep the old
opcodes around until all backends support the new opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Move TCGLabelQemuLdst and related stuff out of tcg.h.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Eliminates the repeated checks for having created
the s->helpers hash table.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
For the few targets that actually use these, we'd not report
them symbolicly in the tcg opcode logs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
One call inside of a loop to tcg_register_helper instead of hundreds
of sequential calls.
Presumably more icache and branch prediction friendly; resulting binary
size mostly unchanged on x86_64, as we're trading 32-bit rip-relative
references in .text for full 64-bit pointers in .rodata.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
No longer needs to be done on a per-target basis.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Slightly changes the interface, in that we now return name
instead of a TCGHelperInfo structure, which goes away.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Use them in places where mulu2 and muls2 are used.
Optimize mulx2 with dead low part to mulxh.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
No point in splitting the write into 32-bit pieces.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Aliasing was forcing s->code_ptr to be re-read after the store.
Keep the pointer in a local variable to help the compiler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
These will necessarily be the same layout for all hosts. This limits
the amount of boilerplate required to implement jit debug for a host.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
I don't think the debugger actually looks at this for anything,
using the correct .debug_frame contents, but might as well get
it all correct.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Expand the definition of "not present" to include "should not be present".
This means we can simplify the logic surrounding the generic tcg opcodes
for which the host backend ought not be providing definitions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This makes it easier to verify changes to the code
generating the prologue.
[Aurelien: change the format from %i to %zu]
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Commit 7f6f0ae5b95adfa76e10eabe2c34424a955fd10c added two assertions.
One of these assertions is not needed:
The pointer ts is never NULL because it is initialized with the
address of an array element.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In dead_temp, local temps should always be marked as back to memory,
even if they have not been allocated (i.e. they are discared before
cross a basic block).
It fixes the following assertion in target-xtensa:
qemu-system-xtensa: tcg/tcg.c:1665: temp_save: Assertion `s->temps[temp].val_type == 2 || s->temps[temp].fixed_reg' failed.
Aborted
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Fix typo introduced in b3a1be87bac3a6aaa59bb88c1410f170dc9b22d5.
Reported-by: Ruslan Savchenko <ruslan.savchenko@gmail.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add optimized TCG qemu_ld/st generation which locates the code of TLB miss
cases at the end of a block after generating the other IRs.
Currently, this optimization supports only i386 and x86_64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Commit 9c43b68de628a1e2cba556adfb71c17028eb802e do not correctly check
for dead outputs when they need to be synced to memory in case of
half-dead operations.
Fix that by applying the same pattern than for the default case.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The current helper flags, TCG_CALL_CONST and TCG_CALL_PURE might be
confusing and doesn't provide enough granularity for some helpers (FP
helpers for example).
This patch changes them into the following helpers flags:
- TCG_CALL_NO_READ_GLOBALS means that the helper does not read globals,
either directly or via an exception. They will not be saved to their
canonical location before calling the helper.
- TCG_CALL_NO_WRITE_GLOBALS means that the helper does not modify any
globals. They will only be saved to their canonical locations before
calling helpers, but they won't be reloaded afterwise.
- TCG_CALL_NO_SIDE_EFFECTS means that the call to the function is
removed if the return value is not used.
It provides convenience flags, to avoid helper definitions longer than
80 characters. It also provides compatibility flags, and updates the
documentation.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Operations with side effects (in practice qemu_ld/st ops), only need to
synchronize globals to make sure the CPU state is consistent in case of
exception.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The liveness analysis ensures that globals and temps are at the correct
state at a basic block end or with an op with side effects. Avoid
looping on all temps, this can be time consuming on targets with a lot
of globals. Keep an assert in debug mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Start with local temps in TEMP_VAL_MEM state, to make possible a later
check that all the temps are correctly saved back to memory.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Always mark dead input arguments as dead, even if the op is at the basic
block end. This will allow to check that all temps are correctly saved.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Now that the liveness analysis provides more information, rewrite
tcg_reg_alloc_mov(). This changes the behaviour about propagating
constants and memory accesses. We now take the assumption that once
a value is loaded into a register (from memory or from a constant),
it's better to keep it there than to reload it later. This assumption
is now always almost correct given that we are now sure the
corresponding temp is going to be used later (otherwise it would have
been synchronized and marked as dead already). The assumption is wrong
if one of the op after clobbers some registers including the one
of the holding the temp (this can be avoided by allocating clobbered
registers last, which is what most TCG target do), or in case of lack
of available register.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Now that the liveness analysis might mark some output temps as dead, call
temp_dead() if needed.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Rework the liveness analysis by tracking temps that need to go back to
memory in addition to dead temps tracking. This allows to mark output
arguments as "need sync", and to synchronize them back to memory as soon
as they are not written anymore. This way even arguments mapping to
globals can be marked as "dead", avoiding moves to a new register when
input and outputs are aliased.
In addition it means that registers are freed as soon as temps are not
used anymore, instead of waiting for a basic block end or an op with side
effects. This reduces register spilling especially on CPUs with few
registers, and spread the mov over all the TB, increasing the
performances on in-order CPUs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Synchronize an output argument when requested by the liveness analysis.
This is needed so that the temp can be declared dead later.
For that, add a new op_sync_args table in which each bit tells if the
corresponding output argument needs to be synchronized with the memory.
Pass it to the tcg_reg_alloc_* functions, and honor this bit. We need to
synchronize the argument before marking it as dead, and we have to make
sure all the infos about the temp are correctly filled.
At the same time change some types from unsigned int to uint16_t when
passing op_dead_args.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add a new function temp_sync() to synchronize the canonical location
of a temp with the value in the corresponding register, but without
freeing the associated register. Rewrite temp_save() to call
temp_sync() followed by temp_dead().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add a new function tcg_reg_sync() to synchronize the canonical location
of a temp with the value in the associated register, but without freeing
it. Rewrite tcg_reg_free() to first call tcg_reg_sync() and then to free
the register.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
A lot of code is duplicated to mark a temporary as dead. Replace it
by temp_dead(), which in addition marks the temp as saved in memory
for globals and local temps, instead of doing this a posteriori in
temp_save().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
linux-user: register align p{read, write}64
linux-user: ppc: mark as long long aligned
tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
configure: Remove unnecessary host_guest_base code
linux-user: If loading fails, print error as string, not number
linux-user: Fix siginfo handling
alpha-linux-user: Fix sigaltstack structure definition
linux-user: Implement gethostname
linux-user: Perform more checks on iovec lists
linux-user: fix multi-threaded /proc/self/maps
linux-user: fix statfs
|
|
Like add2, do operand ordering, constant folding, and dead operand
elimination. The latter happens about 15% of all mulu2 during an
x86_64 bios boot.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When x86_64 guest is not in 64-bit mode, the high-part of the 64-bit
add is dead. When the host is 32-bit, we can simplify to 32-bit
arithmetic.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|