aboutsummaryrefslogtreecommitdiff
path: root/tcg/tcg-op-vec.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-04tcg: Add opcodes for vector nand, nor, eqvRichard Henderson1-9/+18
We've had placeholders for these opcodes for a while, and should have support on ppc, s390x and avx512 hosts. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-05tcg: Expand usadd/ussub with umin/umaxRichard Henderson1-2/+35
For usadd, we only have to consider overflow. Since ~B + B == -1, the maximum value for A that saturates is ~B. For ussub, we only have to consider underflow. The minimum value that saturates to 0 from A - B is B. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth1-1/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-01-13tcg: Remove tcg_gen_dup{8,16,32,64}i_vecRichard Henderson1-20/+0
These interfaces have been replaced by tcg_gen_dupi_vec and tcg_constant_vec. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-13tcg: Remove movi and dupi opcodesRichard Henderson1-1/+0
These are now completely covered by mov from a TYPE_CONST temporary. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-13tcg: Convert tcg_gen_dupi_vec to TCG_CONSTRichard Henderson1-29/+10
Because we now store uint64_t in TCGTemp, we can now always store the full 64-bit duplicate immediate. So remove the difference between 32- and 64-bit hosts. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-10-08tcg: Fix generation of dupi_vec for 32-bit hostRichard Henderson1-4/+8
The definition of INDEX_op_dupi_vec is that it operates on units of tcg_target_ulong -- in this case 32 bits. It does not work to use this for a uint64_t value that happens to be small enough to fit in tcg_target_ulong. Fixes: d2fd745fe8b Fixes: db432672dc5 Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-16tcg: Save/restore vecop_list around minmax fallbackRichard Henderson1-0/+2
Forgetting this asserts when tcg_gen_cmp_vec is called from within tcg_gen_cmpsel_vec. Fixes: 72b4c792c7a Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-02tcg: Implement gvec support for rotate by scalarRichard Henderson1-0/+5
No host backend support yet, but the interfaces for rotls are in place. Only implement left-rotate for now, as the only known use of vector rotate by scalar is s390x, so any right-rotate would be unused and untestable. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-02tcg: Remove expansion to shift by vector from do_shiftsRichard Henderson1-24/+11
We do not reflect this expansion in tcg_can_emit_vecop_list, so it is unused and unusable. However, we actually perform the same expansion in do_gvec_shifts, so it is also unneeded. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-02tcg: Implement gvec support for rotate by vectorRichard Henderson1-0/+10
No host backend support yet, but the interfaces for rotlv and rotrv are in place. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v3: Drop the generic expansion from rot to shift; we can do better for each backend, and then this code becomes unused.
2020-06-02tcg: Implement gvec support for rotate by immediateRichard Henderson1-0/+12
No host backend support yet, but the interfaces for rotli are in place. Canonicalize immediate rotate to the left, based on a survey of architectures, but provide both left and right shift interfaces to the translators. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé1-3/+3
We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-09tcg: Fix expansion of INDEX_op_not_vecRichard Henderson1-0/+6
This operation can always be emitted, even if we need to fall back to xor. Adjust the assertions to match. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-22tcg: Expand vector minmax using cmp+cmpselRichard Henderson1-4/+16
Provide a generic fallback for the min/max operations. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Introduce do_op3_nofail for vector expansionRichard Henderson1-18/+27
This makes do_op3 match do_op2 in allowing for failure, and thus fall back expansions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector compare selectRichard Henderson1-0/+59
Perform a per-element conditional move. This combination operation is easier to implement on some host vector units than plain cmp+bitsel. Omit the usual gvec interface, as this is intended to be used by target-specific gvec expansion call-backs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector bitwise selectRichard Henderson1-0/+26
This operation performs d = (b & a) | (c & ~a), and is present on a majority of host vector units. Include gvec expanders. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add support for vector absolute valueRichard Henderson1-0/+39
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add gvec expanders for vector shift by scalarRichard Henderson1-0/+54
Allow expansion either via shift by scalar or by replicating the scalar for shift by vector. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v3: Use a private structure for do_gvec_shifts.
2019-05-13tcg: Add gvec expanders for variable shiftRichard Henderson1-0/+15
The gvec expanders perform a modulo on the shift count. If the target requires alternate behaviour, then it cannot use the generic gvec expanders anyway, and will have to have its own custom code. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add INDEX_op_dupm_vecRichard Henderson1-0/+11
Allow the backend to expand dup from memory directly, instead of forcing the value into a temp first. This is especially important if integer/vector register moves do not exist. Note that officially tcg_out_dupm_vec is allowed to fail. If it did, we could fix this up relatively easily: VECE == 32/64: Load the value into a vector register, then dup. Both of these must work. VECE == 8/16: If the value happens to be at an offset such that an aligned load would place the desired value in the least significant end of the register, go ahead and load w/garbage in high bits. Load the value w/INDEX_op_ld{8,16}_i32. Attempt a move directly to vector reg, which may fail. Store the value into the backing store for OTS. Load the value into the vector reg w/TCG_TYPE_I32, which must work. Duplicate from the vector reg into itself, which must work. All of which is well and good, except that all supported hosts can support dupm for all vece, so all of the failure paths would be dead code and untestable. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Specify optional vector requirements with a listRichard Henderson1-0/+102
Replace the single opcode in .opc with a null-terminated array in .opt_opc. We still require that all opcodes be used with the same .vece. Validate the contents of this list with CONFIG_DEBUG_TCG. All tcg_gen_*_vec functions will check any list active during .fniv expansion. Swap the active list in and out as we expand other opcodes, or take control away from the front-end function. Convert all existing vector aware front ends. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Allow add_vec, sub_vec, neg_vec, not_vec to be expandedRichard Henderson1-16/+33
PowerPC Altivec does not support add and subtract of 64-bit elements. Prepare for that configuration by not assuming the operation is universally supported. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-30tcg: Fix LGPL version numberThomas Huth1-1/+1
It's either "GNU *Library* General Public version 2" or "GNU Lesser General Public version *2.1*", but there was no "version 2.0" of the "Lesser" library. So assume that version 2.1 is meant here. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-28tcg: Add opcodes for vector minmax arithmeticRichard Henderson1-0/+20
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: Add opcodes for vector saturated arithmeticRichard Henderson1-4/+30
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: Add gvec expanders for nand, nor, eqvRichard Henderson1-0/+21
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé1-1/+0
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-01tcg: Allow wider vectors for cmp and mulRichard Henderson1-4/+4
In db432672, we allow wide inputs for operations such as add. However, in 212be173 and 3774030a we didn't do the same for compare and multiply. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for multiplicationRichard Henderson1-0/+22
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for comparisonsRichard Henderson1-0/+23
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for constant shiftsRichard Henderson1-0/+45
Opcodes are added for scalar and vector shifts, but considering the varied semantics of these do not expose them to the front ends. Do go ahead and provide them in case they are needed for backend expansion. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector expandersRichard Henderson1-13/+20
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add types and basic operations for host vectorsRichard Henderson1-0/+292
Nothing uses or enables them yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2024-12-26 14:47:06 +0000