aboutsummaryrefslogtreecommitdiff
path: root/tcg/ia64
AgeCommit message (Collapse)AuthorFilesLines
2017-01-10tcg: Add opcode for ctpopRichard Henderson1-0/+2
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson1-0/+4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Pass the opcode width to target_parse_constraintRichard Henderson1-9/+5
This will let us choose how to interpret a given constraint depending on whether the opcode is 32- or 64-bit. Which will let us share more constraint combinations between opcodes. At the same time, change the interface to return the advanced pointer instead of passing it in/out by reference. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Transition flat op_defs array to a target callbackRichard Henderson1-2/+12
This will allow the target to tailor the constraints to the auto-detected ISA extensions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson1-0/+4
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg/ia64: Add support for fencePranith Kumar1-0/+5
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20160714202026.9727-6-bobby.prani@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg: Support arbitrary size + alignmentRichard Henderson1-7/+15
Previously we allowed fully unaligned operations, but not operations that are aligned but with less alignment than the operation size. In addition, arm32, ia64, mips, and sparc had been omitted from the previous overalignment patch, which would have led to that alignment being enforced. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster1-2/+3
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05tcg: Optimize spills of constantsRichard Henderson1-0/+10
While we can store constants via constrants on INDEX_op_st_i32 et al, we weren't able to spill constants to backing store. Add a new backend interface, tcg_out_sti, which may store the constant (and is allowed to fail). Rearrange the temp_* helpers so that we only attempt to directly store a constant when the temp is becoming dead/free. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov1-3/+3
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno1-1/+1
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno1-3/+3
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell1-0/+0
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Respect highwater in tcg_out_tb_finalizeRichard Henderson1-1/+10
Undo the workaround at b17a6d3390f87620735f7efb03bb1c96682ff449. If there are lots of memory operations in a TB, the slow path code can exceed the highwater reservation. Add a check within the loop. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11typofixes - v4Veres Lajos1-1/+1
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier1-12/+9
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24linux-user: remove --enable-guest-base/--disable-guest-baseLaurent Vivier1-3/+1
All tcg host architectures now support the guest base and as there is no real performance lost, it can be always enabled. Anyway, guest base use can be disabled lively by setting guest base to 0. CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY), it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to use !CONFIG_SOFTMMU instead. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson1-1/+2
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: implement real ext_i32_i64 and extu_i32_i64 opsAurelien Jarno1-0/+4
Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a 32-bit value is always converted to a 64-bit value and not propagated through the register allocator or the optimizer. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno1-1/+1
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini1-0/+2
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson1-2/+2
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson1-4/+8
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson1-9/+7
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg-ia64: Use tcg_malloc to allocate TCGLabelQemuLdstRichard Henderson1-11/+8
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson1-2/+0
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Remove unreachable code in tcg_out_op and op_defsRichard Henderson1-35/+5
The INDEX_op_call case has just been obsoleted; the mov and movi cases have not been reachable for years. Attempt to document this both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT. Because of the TCG_OPF_NOT_PRESENT change, this must be done for all targets in a single commit. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-ia64: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson2-145/+78
Using a 16-byte aligned structure achieves best results, both for code cleanliness and compiled code size. However, this means that we can't use the trick of encoding the slot number into the low 2 bits. Thankfully, we only ever use slot2, so make that explicit in the names of the relocation functions, and drop the code for other slots. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson1-0/+1
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-24Merge remote-tracking branch 'remotes/rth/tags/tcg-next-20140422' into stagingPeter Maydell1-1/+1
Pull tcg 2014-04-22 # gpg: Signature made Tue 22 Apr 2014 22:00:04 BST using RSA key ID 4DD0279B # gpg: Can't check signature: public key not found * remotes/rth/tags/tcg-next-20140422: tcg: Use HOST_WORDS_BIGENDIAN tcg: Fix fallback from muls2_i64 to mulu2_i64 tcg: Use tcg_gen_mulu2_i32 in tcg_gen_muls2_i32 tcg: Relax requirement for mulu2_i32 on 32-bit hosts tcg-s390: Remove W constraint tcg-sparc: Use the type parameter to tcg_target_const_match tcg-ppc64: Use the type parameter to tcg_target_const_match tcg-aarch64: Remove w constraint tcg: Add TCGType parameter to tcg_target_const_match tcg: Fix out of range shift in deposit optimizations tci: Mask shift counts to avoid undefined behavior tcg: Mask shift quantities while folding tcg: Use "unspecified behavior" for shifts tcg: Fix warning (1 bit signed bitfield entry) and replace int by bool Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-18tcg: Add TCGType parameter to tcg_target_const_matchRichard Henderson1-1/+1
Most 64-bit targets need to be able to ignore the high bits of a TCG_TYPE_I32 value. Suggested-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Convert to new ldst opcodesRichard Henderson2-67/+35
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Move part of softmmu slow path out of lineRichard Henderson1-62/+114
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Convert to new ldst helpersRichard Henderson1-62/+80
Still inline, but updated to the new routines. Always use the LE helpers, reusing the bswap between the fast and slot paths. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Reduce code duplication in tcg_out_qemu_ldRichard Henderson1-37/+24
The only differences were in the bswap insns emitted. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Move tlb addend load into tlb readRichard Henderson1-12/+12
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Move bswap for store into tlb loadRichard Henderson1-63/+31
Saving at least two cycles per store, and cleaning up the code. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Re-bundle the tlb loadRichard Henderson1-23/+54
This sequencing requires 5 stop bits instead of 6, and has room left over to pre-load the tlb addend, and bswap data prior to being stored. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-17tcg-ia64: Optimize small arguments to exit_tbRichard Henderson1-3/+9
Saves one bundle for the common case of exit_tb 0. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_bswap64_iRichard Henderson1-35/+28
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_ext_iRichard Henderson1-30/+24
Being able to "extend" from 64-bits (with a mov) simplifies a few places where the conditional breaks the train of thought. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_movi_aRichard Henderson1-16/+16
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_mov_aRichard Henderson1-19/+16
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use A3 form of logical operationsRichard Henderson1-30/+34
We can and/or/xor/andcm small constants, saving one cycle. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use SUB_A3 and ADDS_A4 for subtractionRichard Henderson1-2/+23
We can subtract from more small constants that just 0 with one insn, and we can add the negative for most small constants. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use ADDS for small additionRichard Henderson1-4/+16
Avoids a wasted cycle loading up small constants. Simplify the code assuming the tcg optimizer is going to work and don't expect the first operand of the add to be constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Avoid unnecessary stop bit in tcg_out_aluRichard Henderson1-11/+6
When performing an operation with two input registers, we'd leave the stop bit (and thus an extra cycle) that's only needed when one or the other input is a constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Move AREG0 to R32Richard Henderson2-9/+8
Since the move away from the global areg0, we're no longer globally reserving areg0. Which means our use of R7 clobbers a call-saved register. Shift areg0 into the windowed registers. Indeed, choose the incoming parameter register that it comes to us by. This requires moving the register holding the return address elsewhere. Choose R33 for tidiness. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Simplify brcondRichard Henderson1-34/+10
There was a misconception that a stop bit is required between a compare and the branch that uses the predicate set by the compare. This lead to the usage of an extra bundle in which to perform the compare. The extra bundle left room for constants to be loaded for use with the compare insn. If we pack the compare and the branch together in the same bundle, then there's no longer any room for non-zero constants. At which point we can eliminate half the function by not handling them. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Handle constant callsRichard Henderson1-3/+35
Using only indirect calls results in 3 bundles (one to load the descriptor address), and 4 stop bits. By looking through the descriptor to the constants, we can perform the call with 2 bundles and only 1 stop bit. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.1 at 2024-11-03 11:56:17 +0000