aboutsummaryrefslogtreecommitdiff
path: root/tcg/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-06-05tcg: Split out tcg-target-reg-bits.hRichard Henderson1-0/+12
Often, the only thing we need to know about the TCG host is the register size. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05tcg: Add tlb_fast_offset to TCGContextRichard Henderson1-3/+4
Disconnect the layout of ArchCPU from TCG compilation. Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05tcg: Widen CPUTLBEntry comparators to 64-bitsRichard Henderson1-0/+1
This makes CPUTLBEntry agnostic to the address size of the guest. When 32-bit addresses are in effect, we can simply read the low 32 bits of the 64-bit field. Similarly when we need to update the field for setting TLB_NOTDIRTY. For TCG backends that could in theory be big-endian, but in practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON to document and ensure this is not accidentally missed. For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway, to document the reason for the adjustment. For sparc64 and ppc64, always perform a 64-bit load, and rely on the following 32-bit comparison to ignore the high bits. Rearrange mips and ppc if ladders for clarity. Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-30tcg: Remove TCG_TARGET_TLB_DISPLACEMENT_BITSRichard Henderson1-1/+0
The last use was removed by e77c89fb086a. Fixes: e77c89fb086a ("cputlb: Remove static tlb sizing") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg: Add page_bits and page_mask to TCGContextRichard Henderson1-5/+5
Disconnect guest page size from TCG compilation. While this could be done via exec/target_page.h, we want to cache the value across multiple memory access operations, so we might as well initialize this early. The changes within tcg/ are entirely mechanical: sed -i s/TARGET_PAGE_BITS/s->page_bits/g sed -i s/TARGET_PAGE_MASK/s->page_mask/g Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg/arm: Remove TARGET_LONG_BITSRichard Henderson1-7/+7
All uses can be infered from the INDEX_op_qemu_*_a{32,64}_* opcode being used. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg: Split INDEX_op_qemu_{ld,st}* for guest address sizeRichard Henderson1-40/+43
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits, as we need one or two host registers to represent the guest address. Create the new opcodes and update all users. Since we have not yet eliminated TARGET_LONG_BITS, only one of the two opcodes will ever be used, so we can get away with treating them the same in the backends. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg/arm: Use atom_and_align_for_opcRichard Henderson1-17/+22
No change to the ultimate load/store routines yet, so some atomicity conditions not yet honored, but plumbs the change to alignment through the relevant functions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg: Add INDEX_op_qemu_{ld,st}_i128Richard Henderson1-0/+2
Add opcodes for backend support for 128-bit memory operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg: Introduce tcg_target_has_memory_bswapRichard Henderson2-1/+5
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro with a function with a memop argument. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg/arm: Use full load/store helpers in user-only modeRichard Henderson1-45/+0
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers. This will allow the fast path to increase alignment to implement atomicity while not immediately raising an alignment exception. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg/arm: Adjust constraints on qemu_ld/stRichard Henderson3-26/+18
Always reserve r3 for tlb softmmu lookup. Fix a bug in user-only ALL_QLDST_REGS, in that r14 is clobbered by the BLNE that leads to the misaligned trap. Remove r0+r1 from user-only ALL_QLDST_REGS; I believe these had been reserved for bswap, which we no longer perform during qemu_st. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16tcg: Unify helper_{be,le}_{ld,st}*Richard Henderson1-37/+0
With the current structure of cputlb.c, there is no difference between the little-endian and big-endian entry points, aside from the assert. Unify the pairs of functions. Hoist the qemu_{ld,st}_helpers arrays to tcg.c. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11tcg/arm: Convert tcg_out_qemu_{ld,st}_slow_pathRichard Henderson1-123/+19
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret, and tcg_out_st_helper_args. This allows our local tcg_out_arg_* infrastructure to be removed. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11tcg/arm: Introduce prepare_host_addrRichard Henderson1-192/+159
Merge tcg_out_tlb_load, add_qemu_ldst_label, and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st into one function that returns HostAddress and TCGLabelQemuLdst structures. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05tcg/arm: Introduce HostAddressRichard Henderson1-132/+114
Collect the parts of the host address, and condition, into a struct. Merge tcg_out_qemu_*_{index,direct} and use it. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05tcg/arm: Rationalize args to tcg_out_qemu_{ld,st}Richard Henderson1-57/+56
Interpret the variable argument placement in the caller. Pass data_type instead of is_64. We need to set this in TCGLabelQemuLdst, so plumb this all the way through from tcg_out_op. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-02tcg: Introduce tcg_out_movext2Richard Henderson1-26/+18
This is common code in most qemu_{ld,st} slow paths, moving two registers when there may be overlap between sources and destinations. At present, this is only used by 32-bit hosts for 64-bit data, but will shortly be used for more than that. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Introduce tcg_out_xchgRichard Henderson1-0/+5
We will want a backend interface for register swapping. This is only properly defined for x86; all others get a stub version that always indicates failure. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Introduce tcg_out_movextRichard Henderson1-12/+4
This is common code in most qemu_{ld,st} slow paths, extending the input value for the store helper data argument or extending the return value from the load helper. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_extrl_i64_i32Richard Henderson1-0/+5
We will need a backend interface for type truncation. For those backends that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_extu_i32_i64Richard Henderson1-0/+5
We will need a backend interface for type extension with zero. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_exts_i32_i64Richard Henderson1-0/+5
We will need a backend interface for type extension with sign. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext32uRichard Henderson1-0/+5
We will need a backend interface for performing 32-bit zero-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext32sRichard Henderson1-0/+5
We will need a backend interface for performing 32-bit sign-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext16uRichard Henderson1-7/+10
We will need a backend interface for performing 16-bit zero-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext16sRichard Henderson1-6/+4
We will need a backend interface for performing 16-bit sign-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext8uRichard Henderson1-3/+9
We will need a backend interface for performing 8-bit zero-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Split out tcg_out_ext8sRichard Henderson1-6/+4
We will need a backend interface for performing 8-bit sign-extend. Use it in tcg_reg_alloc_op in the meantime. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23tcg: Replace tcg_abort with g_assert_not_reachedRichard Henderson1-1/+1
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128Richard Henderson1-0/+2
Fill in the parameters for the host ABI for Int128 for those backends which require no extra modification. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04tcg: Introduce tcg_target_call_oarg_regRichard Henderson1-3/+7
Replace the flat array tcg_target_call_oarg_regs[] with a function call including the TCGCallReturnKind. Extend the set of registers for ARM to r0-r3 to match the ABI: https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04tcg: Introduce tcg_out_addi_ptrRichard Henderson1-0/+20
Implement the function for arm, i386, and s390x, which will use it. Add stubs for all other backends. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-23tcg/arm: Use register pair allocation for qemu_{ld,st}_i64Richard Henderson3-13/+24
Although we still can't use ldrd and strd for all operations, increase the chances by getting the register allocation correct. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg/arm: Implement direct branch for goto_tbRichard Henderson1-15/+37
Now that tcg can handle direct and indirect goto_tb simultaneously, we can optimistically leave space for a direct branch and fall back to loading the pointer from the TB for an indirect branch. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Remove TCG_TARGET_HAS_direct_jumpRichard Henderson2-2/+0
We now have the option to generate direct or indirect goto_tb depending on the dynamic displacement, thus the define is no longer necessary or completely accurate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Always define tb_target_set_jmp_targetRichard Henderson1-0/+6
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Move tb_target_set_jmp_target declaration to tcg.hRichard Henderson1-5/+0
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Change tb_target_set_jmp_target argumentsRichard Henderson1-1/+2
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Split out tcg_out_goto_tbRichard Henderson1-23/+26
The INDEX_op_goto_tb opcode needs no register allocation. Split out a dedicated helper function for it. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Introduce get_jmp_target_addrRichard Henderson1-1/+1
Similar to the existing set_jmp_reset_offset. Include the rw->rx address space conversion done by arm and s390x, and forgotten by mips and riscv. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Replace asserts on tcg_jmp_insn_offsetRichard Henderson1-1/+1
Test TCG_TARGET_HAS_direct_jump instead of testing an implementation pointer. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17tcg: Split out tcg_out_exit_tbRichard Henderson1-4/+7
The INDEX_op_exit_tb opcode needs no register allocation. Split out a dedicated helper function for it. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Add TCGHelperInfo argument to tcg_out_callRichard Henderson1-2/+8
This eliminates an ifdef for TCI, and will be required for expanding the call for TCGv_i128. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32Richard Henderson1-0/+1
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND. Otherwise, use TCG_CALL_ARG_NORMAL. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64Richard Henderson1-1/+1
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS was silently ignored, so always use TCG_CALL_ARG_NORMAL. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-04tcg: Remove TCG_TARGET_STACK_GROWSUPRichard Henderson1-1/+0
The hppa host code has been removed since 2013; this should have been deleted at the same time. Fixes: 802b5081233a ("tcg-hppa: Remove tcg backend") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-06Replace config-time define HOST_WORDS_BIGENDIANMarc-André Lureau1-2/+2
Replace a config-time define with a compile time condition define (compatible with clang and gcc) that must be declared prior to its usage. This avoids having a global configure time define, but also prevents from bad usage, if the config header wasn't included before. This can help to make some code independent from qemu too. gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> [ For the s390x parts I'm involved in ] Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-14tcg/arm: Don't emit UNPREDICTABLE LDRD with Rm == Rt or Rt+1Richard Henderson1-2/+15
The LDRD (register) instruction is UNPREDICTABLE if the Rm register is the same as either Rt or Rt+1 (the two registers being loaded to). We weren't making sure we avoided this, with the result that on some host CPUs like the Cortex-A7 we would get a SIGILL because the CPU chooses to UNDEF for this particular UNPREDICTABLE case. Since we've already checked that datalo is aligned, we can simplify the test vs the Rm operand by aligning it before comparison. Check for the two orderings before falling back to two ldr instructions. We don't bother to do anything similar for tcg_out_ldrd_rwb(), because it is only used in tcg_out_tlb_read() with a fixed set of registers which don't overlap. There is no equivalent UNPREDICTABLE case for STRD. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/896 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-04tcg: Add opcodes for vector nand, nor, eqvRichard Henderson1-0/+3
We've had placeholders for these opcodes for a while, and should have support on ppc, s390x and avx512 hosts. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2025-01-06 11:05:51 +0000