aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)AuthorFilesLines
2018-10-24Merge remote-tracking branch ↵Peter Maydell3-19/+908
'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging MIPS queue for October 2018 - part 2 - v2 # gpg: Signature made Wed 24 Oct 2018 14:22:54 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits) target/mips: Fix decoding of ALIGN and DALIGN instructions target/mips: Fix the title of translate.c linux-user/mips: Recognize the R5900 CPU model target/mips: Define the R5900 CPU tests/tcg/mips: Add tests for R5900 DIVU1 tests/tcg/mips: Add tests for R5900 DIV1 tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1 tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1 tests/tcg/mips: Add tests for R5900 three-operand MULTU1 tests/tcg/mips: Add tests for R5900 three-operand MULT1 tests/tcg/mips: Add tests for R5900 three-operand MULTU tests/tcg/mips: Add tests for R5900 three-operand MULT target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV target/mips: Support R5900 DIV1 and DIVU1 instructions target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions target/mips: Support R5900 three-operand MULT and MULTU instructions target/mips: Add a placeholder for R5900 MMI3 instruction subclass target/mips: Add a placeholder for R5900 MMI2 instruction subclass ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/mips: Fix decoding of ALIGN and DALIGN instructionsAleksandar Markovic1-8/+32
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to allow paremeter 'bp' to occupy two and three bits, respectively. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Fix the title of translate.cAleksandar Markovic1-1/+1
Replace MIPS32 with MIPS, since the file covers all generations of MIPS architectures. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define the R5900 CPUFredrik Noring1-0/+59
The primary purpose of this change is to support programs compiled by GCC for the R5900 target and thereby run R5900 Linux distributions, for example Gentoo. GCC in version 7.3, by itself, by inspection of the GCC source code and inspection of the generated machine code, for the R5900 target, only emits two instructions that are specific to the R5900: the three- operand MULT and MULTU. GCC and libc also emit certain MIPS III instructions that are not part of the R5900 ISA. They are normally trapped and emulated by the Linux kernel, and therefore need to be treated accordingly by QEMU. A program compiled by GCC is taken to mean source code compiled by GCC under the restrictions above. One can, with the apparent limitations, with a bit of effort obtain a fully functioning operating system such as R5900 Gentoo. Strictly speaking, programs need not be compiled by GCC to make use of this change. Instructions and other facilities of the R5900 not implemented by this change are intended to signal provisional exceptions. One such example is the FPU that is not compliant with IEEE 754-1985 in system mode. It is therefore provisionally disabled. In user space the FPU is trapped and emulated by IEEE 754-1985 compliant software in the kernel, and this is handled accordingly by QEMU. Another example is the 93 multimedia instructions specific to the R5900 that generate provisional reserved instruction exception signals. One of the benefits of running a Linux distribution under QEMU is that programs can be compiled with a native compiler, where the host and target are the same, as opposed to a cross-compiler, where they are not the same. This is especially important in cases where the target hardware does not have the resources to run a native compiler. Problems with cross-compilation are often related to host and target differences in integer sizes, pointer sizes, endianness, machine code, ABI, etc. Sometimes cross-compilation is not even supported by the build script for a given package. One effective way to avoid those problems is to replace the cross-compiler with a native compiler. This change of compilation methods does not resolve the inherent problems with cross-compilation. The native compiler naturally replaces the cross-compiler, because one typically uses one or the other, and preferably the native compiler when the circumstances admit this. The native compiler is also a good test case for the R5900 QEMU user mode. Additionally, Gentoo is well- known for compiling and installing its packages from sources. This change has been tested with Gentoo compiled for R5900, including native compilation of several packages under QEMU. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user onlyFredrik Noring1-1/+22
The Linux kernel traps certain reserved instruction exceptions to emulate the corresponding instructions. QEMU plays the role of the kernel in user mode, so those traps are emulated by accepting the instructions. This change adds the function check_insn_opc_user_only to signal a reserved instruction exception for flagged CPUs in QEMU system mode. The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not implemented in R5900 hardware. They are trapped and emulated by the Linux kernel and, accordingly, therefore QEMU user only instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IVFredrik Noring1-2/+3
The R5900 is taken to be MIPS III with certain modifications. From MIPS IV it implements the instructions MOVN, MOVZ and PREF. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 DIV1 and DIVU1 instructionsFredrik Noring1-3/+9
Add support for DIV1 and DIVU1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructionsFredrik Noring1-6/+17
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 three-operand MULT1 and MULTU1 instructionsFredrik Noring1-3/+14
Add support for MULT1 and MULTU1 instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Support R5900 three-operand MULT and MULTU instructionsFredrik Noring1-0/+74
The three-operand MULT and MULTU are the only R5900-specific instructions emitted by GCC 7.3. The R5900 also implements the three- operand MADD and MADDU instructions, but they are omitted in QEMU for now since they are absent in programs compiled by current GCC versions. Likewise, the R5900-specific pipeline 1 instruction variants MULT1, MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1 are omitted here as well. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI3 instruction subclassFredrik Noring1-1/+30
Add a placeholder for MMI3 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI2 instruction subclassFredrik Noring1-1/+39
Add a placeholder for MMI2 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI1 instruction subclassFredrik Noring1-1/+35
Add a placeholder for MM1 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI0 instruction subclassFredrik Noring1-1/+42
Add a placeholder for MMI0 subclass. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 MMI instruction classFredrik Noring1-1/+44
Add a placeholder for MMI class. This is the main palceholder for MMI ASE. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 LQFredrik Noring1-2/+11
Add a placeholder for LQ instruction. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add a placeholder for R5900 SQ, handle user mode RDHWRFredrik Noring1-1/+52
Add placeholder for SQ instruction, handle RDHWR. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI3 opcode constantsFredrik Noring1-0/+39
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI2 opcode constantsFredrik Noring1-0/+48
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI1 opcode constantsFredrik Noring1-0/+44
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI0 opcode constantsFredrik Noring1-0/+51
Add definition of MI0 opcodes. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI<0|1|2|3> subclasses and opcode constantsFredrik Noring1-0/+51
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of instructions in MMI class. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 MMI class, and LQ and SQ opcode constantsFredrik Noring1-0/+40
Define MMI class, LQ, and SQ R5900 opdoces. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Add R5900 Multimedia Instruction overview noteFredrik Noring1-0/+161
Add a comment on R5900 MMI ASE (short overview). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/mips: Define R5900 ISA, MMI ASE, and R5900 CPU preprocessor constantsFredrik Noring1-0/+3
The R5900 implements the 64-bit MIPS III instruction set except DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV instructions MOVN, MOVZ and PREF are implemented. It has the R5900-specific three-operand instructions MADD, MADDU, MULT and MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit multimedia instructions specific to the R5900 is also implemented. The Toshiba TX System RISC TX79 Core Architecture manual: https://wiki.qemu.org/File:C790.pdf describes the C790 processor that is a follow-up to the R5900. There are a few notable differences in that the R5900 FPU - is not IEEE 754-1985 compliant, - does not implement double format, and - its machine code is nonstandard. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24target/arm: Only flush tlb if ASID changesRichard Henderson1-5/+3
Since QEMU does not implement ASIDs, changes to the ASID must flush the tlb. However, if the ASID does not change there is no reason to flush. In testing a boot of the Ubuntu installer to the first menu, this reduces the number of flushes by 30%, or nearly 600k instances. Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181019015617.22583-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Remove writefn from TTBR0_EL3Richard Henderson1-1/+1
The EL3 version of this register does not include an ASID, and so the tlb_flush performed by vmsa_ttbr_write is not needed. Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181019015617.22583-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Reorg NEON VLD/VST single element to one laneRichard Henderson1-42/+50
Instead of shifts and masks, use direct loads and stores from the neon register file. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Promote consecutive memory ops for aa32Richard Henderson1-0/+10
For a sequence of loads or stores from a single register, little-endian operations can be promoted to an 8-byte op. This can reduce the number of operations by a factor of 8. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-20-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Reorg NEON VLD/VST all elementsRichard Henderson1-96/+74
Instead of shifts and masks, use direct loads and stores from the neon register file. Mirror the iteration structure of the ARM pseudocode more closely. Correct the parameters of the VLD2 A2 insn. Note that this includes a bugfix for handling of the insn "VLD2 (multiple 2-element structures)" -- we were using an incorrect stride value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-19-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VLD all lanesRichard Henderson1-55/+26
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-18-richard.henderson@linaro.org [PMM: added parens in ?: expression] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGERichard Henderson3-61/+60
Move cmtst_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-17-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VMLRichard Henderson3-122/+120
Move mla_op and mls_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSRI, VSLIRichard Henderson3-219/+179
Move shi_op and sli_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSRARichard Henderson3-117/+130
Move ssra_op and usra_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-14-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSHR, VSHLRichard Henderson1-22/+48
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VMULRichard Henderson1-16/+15
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEGRichard Henderson1-8/+8
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VADD_VSUB insnsRichard Henderson1-19/+10
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-10-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_LOGIC insnsRichard Henderson3-105/+124
Move expanders for VBSL, VBIT, and VBIF from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate)Richard Henderson1-25/+36
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VDUPRichard Henderson1-27/+36
Also introduces neon_element_offset to find the env offset of a specific element within a neon register. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Mark some arrays constRichard Henderson1-2/+2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181011205206.3552-6-richard.henderson@linaro.org [PMM: drop change to now-deleted cpu_mode_names array] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Promote consecutive memory ops for aa64Richard Henderson1-26/+40
For a sequence of loads or stores from a single register, little-endian operations can be promoted to an 8-byte op. This can reduce the number of operations by a factor of 8. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use tcg_gen_gvec_dup_i64 for LD[1-4]RRichard Henderson1-25/+3
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Don't call tcg_clear_temp_countRichard Henderson2-2/+0
This is done generically in translator_loop. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181011205206.3552-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Hoist address increment for vector memory opsRichard Henderson1-4/+8
This can reduce the number of opcodes required for certain complex forms of load-multiple (e.g. ld4.16b). Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 20181011205206.3552-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Report correct syndrome for FP/SIMD traps to Hyp modePeter Maydell3-5/+26
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome provided in HSR has more information than is reported to AArch64. Specifically, there are extra fields TA and coproc which indicate whether the trapped instruction was FP or SIMD. Add this extra information to the syndromes we construct, and mask it out when taking the exception to AArch64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-11-peter.maydell@linaro.org
2018-10-24target/arm: Get IL bit correct for v7 syndrome valuesPeter Maydell2-5/+15
For the v7 version of the Arm architecture, the IL bit in syndrome register values where the field is not valid was defined to be UNK/SBZP. In v8 this is RES1, which is what QEMU currently implements. Handle the desired v7 behaviour by squashing the IL bit for the affected cases: * EC == EC_UNCATEGORIZED * prefetch aborts * data aborts where ISV is 0 (The fourth case listed in the v8 Arm ARM DDI 0487C.a in section G7.2.70, "illegal state exception", can't happen on a v7 CPU.) This deals with a corner case noted in a comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-10-peter.maydell@linaro.org
2018-10-24target/arm: New utility function to extract EC from syndromePeter Maydell4-4/+9
Create and use a utility function to extract the EC field from a syndrome, rather than open-coding the shift. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-02-02 06:16:42 +0000