aboutsummaryrefslogtreecommitdiff
path: root/target/ppc/timebase_helper.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-18target/ppc: fix exception error code in helper_{load, store}_dcrMatheus Ferst1-3/+3
POWERPC_EXCP_INVAL should only be or-ed with other constants prefixed with POWERPC_EXCP_INVAL_. Also, take the opportunity to move both helpers under #if !defined(CONFIG_USER_ONLY) as the instructions that use them are privileged. No functional change is intended, the lower 4 bits of the error code are ignored by all powerpc_excp_* methods on POWERPC_EXCP_INVAL exceptions. Reported-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220627141104.669152-5-matheus.ferst@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-02-09target/ppc: Remove PowerPC 601 CPUsCédric Le Goater1-20/+0
The PowerPC 601 processor is the first generation of processors to implement the PowerPC architecture. It was designed as a bridge processor and also could execute most of the instructions of the previous POWER architecture. It was found on the first Macs and IBM RS/6000 workstations. There is not much interest in keeping the CPU model of this POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of the 60x family which implement the complete PowerPC instruction set. Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203142756.1302515-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-04ppc/ppc405: Restore TCR and STR write handlersCédric Le Goater1-0/+10
The 405 timers were broken when booke support was added. Assumption was made that the register numbers were the same but it's not : SPR_BOOKE_TSR (0x150) SPR_BOOKE_TCR (0x154) SPR_40x_TSR (0x3D8) SPR_40x_TCR (0x3DA) Cc: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: ddd1055b07fd ("PPC: booke timers") Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211222064025.1541490-5-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220103063441.3424853-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-11-15powerpc tcg: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201019061126.3102-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-03-24hw/ppc: Take QEMU lock when calling ppc_dcr_read/write()Peter Maydell1-14/+26
The ppc_dcr_read() and ppc_dcr_write() functions call into callbacks in device code, so we need to hold the QEMU iothread lock while calling them. This is the case already for the callsites in kvmppc_handle_dcr_read/write(), but we must also take the lock when calling the helpers from TCG. This fixes a bug where attempting to initialise the PPC405EP SDRAM will cause an assertion when sdram_map_bcr() attempts to remap memory regions. Reported-by: Amit Lazar <abasarlaz@hotmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200322192258.14039-1-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Add SPR TBU40Suraj Jitindar Singh1-0/+5
The spr TBU40 is used to set the upper 40 bits of the timebase register, present on POWER5+ and later processors. This register can only be written by the hypervisor, and cannot be read. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Work [S]PURR implementation and add HV supportSuraj Jitindar Singh1-0/+5
The Processor Utilisation of Resources Register (PURR) and Scaled Processor Utilisation of Resources Register (SPURR) provide an estimate of the resources used by the thread, present on POWER7 and later processors. Currently the [S]PURR registers simply count at the rate of the timebase. Preserve this behaviour but rework the implementation to store an offset like the timebase rather than doing the calculation manually. Also allow hypervisor write access to the register along with the currently available read access. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Implement the VTB for HV accessSuraj Jitindar Singh1-0/+10
The virtual timebase register (VTB) is a 64-bit register which increments at the same rate as the timebase register, present on POWER8 and later processors. The register is able to be read/written by the hypervisor and read by the supervisor. All other accesses are illegal. Currently the VTB is just an alias for the timebase (TB) register. Implement the VTB so that is can be read/written independent of the TB. Make use of the existing method for accessing timebase facilities where by the compensation is stored and used to compute the value on reads/is updated on writes. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-0/+176
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2025-01-01 10:08:37 +0000