aboutsummaryrefslogtreecommitdiff
path: root/target/nios2/helper.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-26target/nios2: Advance pc when raising exceptionsRichard Henderson1-6/+7
The exception return address for nios2 is the instruction after the one that was executing at the time of the exception. We have so far implemented this by advancing the pc during the process of raising the exception. It is perhaps a little less confusing to do this advance in the translator (and helpers) when raising the exception in the first place, so that we may more closely match kernel sources. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-58-richard.henderson@linaro.org>
2022-04-26target/nios2: Implement EIC interrupt processingRichard Henderson1-1/+50
This is the cpu side of the operation. Register one irq line, called EIC. Split out the rather different processing to a separate function. Delay initialization of gpio irqs until realize. We need to provide a window after init in which the board can set eic_present. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-57-richard.henderson@linaro.org>
2022-04-26target/nios2: Enable unaligned traps for system modeRichard Henderson1-2/+2
Unaligned traps are optional, but required with an mmu. Turn them on always, because the fallback behaviour undefined. Enable alignment checks in the config file. Unwind the guest pc properly from do_unaligned_access. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-48-richard.henderson@linaro.org>
2022-04-26target/nios2: Support division error exceptionRichard Henderson1-0/+4
Division may (optionally) raise a division exception. Since the linux kernel has been prepared for this for some time, enable it by default. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-42-richard.henderson@linaro.org>
2022-04-26target/nios2: Clean up handling of tlbmisc in do_exceptionRichard Henderson1-31/+66
The 4 lower bits, D, PERM, BAD, DBL, are unconditionally set on any exception with EH=0, or so says Table 42 (Processor Status After Taking Exception). We currently do not set PERM or BAD at all, and only set/clear DBL for tlb miss, and do not clear DBL for any other exception. It is a bit confusing to set D in tlb_fill and the rest during do_interrupt, so move the setting of D to do_interrupt as well. To do this, split EXP_TLBD into two cases, EXCP_TLB_X and EXCP_TLB_D, which allows us to distinguish them during do_interrupt. Choose a value for EXCP_TLB_D such that when truncated it produces the correct value for exception.CAUSE. Rename EXCP_TLB[RWX] to EXCP_PERM_[RWX], to emphasize that the exception is permissions related. Rename EXCP_SUPER[AD] to EXCP_SUPERA_[DX] to emphasize that they are both "supervisor address" exceptions, data and execute. Retain the setting of tlbmisc.WE for the fast-tlb-miss path, as it is being relied upon, but remove it from the permission path. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-37-richard.henderson@linaro.org>
2022-04-26target/nios2: Cleanup set of CR_EXCEPTION for do_interruptRichard Henderson1-3/+4
The register is entirely read-only for software, and we do not implement ECC, so we need not deposit the cause into an existing value; just create a new value from scratch. Furthermore, exception.CAUSE is not written for break exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-36-richard.henderson@linaro.org>
2022-04-26target/nios2: Handle EXCP_UNALIGN and EXCP_UNALIGNDRichard Henderson1-0/+8
While some of the plumbing for misaligned data is present, in the form of nios2_cpu_do_unaligned_access, the hook will not be called because TARGET_ALIGNED_ONLY is not set in configs/targets/nios2-softmmu.mak. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-35-richard.henderson@linaro.org>
2022-04-26target/nios2: Hoist CPU_LOG_INT loggingRichard Henderson1-11/+47
Performing this early means that we can merge more cases within the non-logging switch statement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-34-richard.henderson@linaro.org>
2022-04-26target/nios2: Clean up nios2_cpu_do_interruptRichard Henderson1-97/+44
Split out do_exception and do_iic_irq to handle bulk of the interrupt and exception processing. Parameterize the changes required to cpu state. The status.EH bit, which protects some data against double-faults, is only present with the MMU. Several exception cases did not check for status.EH being set, as required. The status.IH bit, which had been set by EXCP_IRQ, is exclusive to the external interrupt controller, which we do not yet implement. The internal interrupt controller, when the MMU is also present, sets the status.EH bit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-33-richard.henderson@linaro.org>
2022-04-26target/nios2: Create EXCP_SEMIHOST for semi-hostingRichard Henderson1-8/+6
Decode 'break 1' during translation, rather than doing it again during exception processing. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-32-richard.henderson@linaro.org>
2022-04-26target/nios2: Use hw/registerfields.h for CR_TLBMISC fieldsRichard Henderson1-5/+2
Use FIELD_EX32 and FIELD_DP32 instead of managing the masking by hand. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-30-richard.henderson@linaro.org>
2022-04-26target/nios2: Rename CR_TLBMISC_WR to CR_TLBMISC_WERichard Henderson1-2/+2
WE is the architectural name of the field, not WR. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-29-richard.henderson@linaro.org>
2022-04-26target/nios2: Use hw/registerfields.h for CR_TLBADDR fieldsRichard Henderson1-2/+2
Use FIELD_EX32 and FIELD_DP32 instead of manual manipulation of the fields. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-27-richard.henderson@linaro.org>
2022-04-26target/nios2: Use hw/registerfields.h for CR_EXCEPTION fieldsRichard Henderson1-15/+22
Use FIELD_DP32 instead of manual shifting and masking. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-26-richard.henderson@linaro.org>
2022-04-26target/nios2: Split control registers away from general registersRichard Henderson1-53/+53
Place the control registers into their own array, env->ctrl[]. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-23-richard.henderson@linaro.org>
2022-04-26target/nios2: Split PC out of env->regs[]Richard Henderson1-27/+22
It is cleaner to have a separate name for this variable. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-17-richard.henderson@linaro.org>
2022-04-26target/nios2: Build helper.c for system onlyRichard Henderson1-2/+1
Remove the #ifdef !defined(CONFIG_USER_ONLY) that surrounds the whole file, and move helper.c to nios2_softmmu_ss. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-12-richard.henderson@linaro.org>
2022-04-26target/nios2: Remove nios2_cpu_record_sigsegvRichard Henderson1-13/+1
Since f5ef0e518d0, we have a real page mapped for kuser, which means the special casing for SIGSEGV can go away. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-11-richard.henderson@linaro.org>
2022-04-26target/nios2: Remove user-only nios2_cpu_do_interruptRichard Henderson1-8/+0
Since 78271684719, this function is unused for user-only, when the TCGCPUOps.do_interrupt hook itself became system-only. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220421151735.31996-10-richard.henderson@linaro.org>
2021-11-02target/nios2: Implement nios2_cpu_record_sigsegvRichard Henderson1-3/+4
Because the linux-user kuser page handling is currently implemented by detecting magic addresses in the unnamed 0xaa trap, we cannot simply remove nios2_cpu_tlb_fill and rely on the fallback code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé1-1/+1
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2019-05-28semihosting: move semihosting configuration into its own directoryAlex Bennée1-1/+1
In preparation for having some more common semihosting code let's excise the current config magic from vl.c into its own file. We shall later add more conditionals to the build configurations so we can avoid building this if we don't need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson1-6/+0
We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/nios2: Convert to CPUClass::tlb_fillRichard Henderson1-90/+86
Remove the leftover debugging cpu_dump_state. Cc: Chris Wulff <crwulff@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-29Add Nios II semihosting support.Sandra Loosemore1-0/+13
This patch adds support for libgloss semihosting to Nios II bare-metal emulation. The specification for the protocol can be found in the libgloss sources. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Signed-off-by: Julian Brown <julian@codesourcery.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1554321185-2825-3-git-send-email-sandra@codesourcery.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster1-1/+1
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-1/+0
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-25accel/tcg: add size paremeter in tlb_fill()Laurent Vivier1-2/+4
The MC68040 MMU provides the size of the access that triggers the page fault. This size is set in the Special Status Word which is written in the stack frame of the access fault exception. So we need the size in m68k_cpu_unassigned_access() and m68k_cpu_handle_mmu_fault(). To be able to do that, this patch modifies the prototype of handle_mmu_fault handler, tlb_fill() and probe_write(). do_unassigned_access() already includes a size parameter. This patch also updates handle_mmu_fault handlers and tlb_fill() of all targets (only parameter, no code change). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2017-12-18nios2: remove duplicated includes (in code commented out)Philippe Mathieu-Daudé1-4/+1
applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24nios2: Add architecture emulation supportChris Wulff1-0/+313
Add support for emulating Altera NiosII R1 architecture into qemu. This patch is based on previous work by Chris Wulff from 2012 and updated to latest mainline QEMU. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Cc: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-3-marex@denx.de> [rth: Remove tlb_flush from nios2_cpu_reset.] Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.1 at 2025-01-17 21:02:25 +0000