aboutsummaryrefslogtreecommitdiff
path: root/target/mips
AgeCommit message (Collapse)AuthorFilesLines
2019-02-14target/mips: introduce MTTCG-enabled buildsAleksandar Markovic1-0/+2
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14target/mips: hold BQL in mips_vpe_wake()Goran Ferenc1-0/+3
Hold BQL whenever mips_vpe_wake() is invoked. Without this patch, MIPS MT with MTTCG enabled triggers an abort in tcg_handle_interrupt() due to an unlocked access to cpu_interrupt(). This patch makes sure that the BQL is held in this case. Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14hw/mips_int: hold BQL for all interrupt requestsAleksandar Markovic1-18/+3
Make sure BQL is held for all interrupt requests. For MTTCG-enabled configurations, handling soft and hard interrupts between vCPUs must be properly locked. By acquiring BQL, make sure all paths triggering an IRQ are synchronized. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14target/mips: reimplement SC instruction emulation and use cmpxchgLeon Alrae5-118/+44
Completely rewrite conditional stores handling. Use cmpxchg. This eliminates need for separate implementations of SC instruction emulation for user and system emulation. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-14target/mips: compare virtual addresses in LL/SC sequenceLeon Alrae4-18/+25
Do only virtual addresses comaprisons in LL/SC sequence emulations. Until this patch, physical addresses had been compared in SC part of LL/SC sequence, even though such comparisons could be avoided. Getting rid of them allows throwing away SC helpers and having common SC implementations in user and system mode, avoiding the need for two separate implementations selected by #ifdef CONFIG_USER_ONLY. Correct guest software should not rely on LL/SC if they accesses the same physical address via different virtual addresses or if page mapping gets changed between LL/SC due to manipulating TLB entries. MIPS Instruction Set Manual clearly says that an RMW sequence must use the same address in the LL and SC (virtual address, physical address, cacheability and coherency attributes must be identical). Otherwise, the result of the SC is not predictable. This patch takes advantage of this fact and removes the virtual->physical address translation from SC helper. lladdr served as Coprocessor 0 LLAddr register which captures physical address of the most recent LL instruction, and also lladdr was used for comparison with following SC physical address. This patch changes the meaning of lladdr - now it will only keep the virtual address of the most recent LL. Additionally, CP0_LLAddr field is introduced which is the actual Coperocessor 0 LLAddr register that guest can access. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: Add I6500 core configurationYongbok Kim1-0/+40
Add I6500 core configuration. Note that this configuration is supported only on best-effort basis due to the lack of certain features in QEMU. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: nanoMIPS: Fix branch handlingStefan Markovic1-0/+12
Fix nanoMIPS branch handling. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: Extend gen_scwp() functionality to support EVAAleksandar Markovic1-4/+6
Extend gen_scwp() functionality to support EVA by adding an additional argument, modify internals of the function to handle new functionality, and accordingly change its invocations. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: Correct the second argument type of cpu_supports_isa()Aleksandar Markovic2-2/+2
"insn_flags" bitfield was expanded from 32-bit to 64-bit in commit f9c9cd63e3. However, this was not reflected on the second argument of the function cpu_supports_isa(). By chance, this did not create some wrong behavior, since the left-most halves of all instances of the second argument are currently all zeros. However, this is still a bug waiting to happen. Correct this by changing the type of the second argument to be always 64-bit. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbersAleksandar Markovic1-13/+13
Rename macros for extracting 3-bit-coded GPR numbers, to achieve better consistency with the nanoMIPS documentation. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: nanoMIPS: Remove an unused macroAleksandar Markovic1-1/+0
Remove a macro that is never used. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24target/mips: nanoMIPS: Remove duplicate macro definitionsAleksandar Markovic1-10/+0
Several macros were defined twice, with identical values, so remove duplicates. Previously added in 80845edf37b. This reverts commit 6bfa9f4c9cf24d6cfaaa227722e9cdcca1ad6fe9. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Introduce 32 R5900 multimedia registersFredrik Noring2-0/+19
The 32 R5900 128-bit registers are split into two 64-bit halves: the lower halves are the GPRs and the upper halves are accessible by the R5900-specific multimedia instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Rename 'rn' to 'register_name'Aleksandar Markovic1-426/+432
Rename 'rn' to 'register_name' in CP0-related handlers. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add CP0 register MemoryMapIDAleksandar Markovic2-2/+4
Add CP0 register MemoryMapID. Only data field is added. The corresponding functionality will be added in future patches. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Amend preprocessor constants for CP0 registersAleksandar Markovic2-170/+284
Correct existing CP0-related preprocessor constants (replace "CPO" with "CP0" (form letter "O" to digit "0", when needed). Besides, add preprocessor constants for CP0 subregisters. The names of the subregisters were chosen to be in sync with the table of corresponding assembler mnemonics found in the documentation for I6500 and I6400 (release 1.0). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Update ITU to utilize SAARI and SAAR CP0 registersYongbok Kim2-0/+19
Update ITU to utilize SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Provide R/W access to SAARI and SAAR CP0 registersYongbok Kim5-4/+120
Provide R/W access to SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add fields for SAARI and SAAR CP0 registersYongbok Kim2-4/+12
Add fields for SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Use preprocessor constants for 32 major CP0 registersAleksandar Markovic1-136/+136
Use preprocessor constants for 32 major CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add preprocessor constants for 32 major CP0 registersAleksandar Markovic1-0/+32
Add preprocessor constants for 32 major CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Move comment containing summary of CP0 registersAleksandar Markovic1-81/+84
Move comment containing summary of CP0 registers. Checkpatch script reported some tabs in the resutling diff, so convert these tabs to spaces too. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini1-1/+1
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-03target/mips: Support R5900 three-operand MADD1 and MADDU1 instructionsFredrik Noring1-3/+9
The three-operand MADD and MADDU are specific to R5900 cores. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03target/mips: Support R5900 three-operand MADD and MADDU instructionsPhilippe Mathieu-Daudé1-5/+53
The three-operand MADD and MADDU are specific to Sony R5900 core, and Toshiba TX19/TX39/TX79 cores as well. The "32-Bit TX System RISC TX39 Family Architecture manual" is available at https://wiki.qemu.org/File:DSAE0022432.pdf Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé<f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Tested-by: Fredrik Noring <noring@nocrew.org>
2019-01-03target/mips: MXU: Add handler for an align instructionAleksandar Markovic1-3/+194
Add translation handler for S32ALNI MXU instruction. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add handlers for max/min instructionsAleksandar Markovic1-21/+279
Add translation handlers for six max/min MXU instructions. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add handlers for logic instructionsAleksandar Markovic1-34/+205
Add translation handlers for four logic MXU instructions. It should be noted that there is an error in MXU documentation (dated June 2017) regarding opcodes for this group of instructions. This was confirmed by running tests on hardware, and also by looking up other related public source trees (binutils, Android NDK). In initial MXU patches to QEMU, opcodes for MXU logic instructions were created to be in accordance with the MXU documentation, therefore the error from was propagated. This patch corrects that, changing the involved code. Besides that, as MXU was designed and implemented only for 32-bit CPUs, corresponding preprosessor conditions were added around MXU code, which allows more flexible implementation of MXU handlers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Improve the comment containing MXU overviewAleksandar Markovic1-30/+44
Improve textual description of MXU extension. These are mostly comment formatting changes. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add generic naming for optn2 constantsAleksandar Markovic1-0/+5
Add generic naming involving generig suffixes OPTN0, OPTN1, OPTN2, OPTN3 for four optn2 constants. Existing suffixes WW, LW, HW, XW are not quite appropriate for some instructions using optn2. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add missing opcodes/decoding for LX* instructionsAleksandar Markovic1-38/+102
Add missing opcodes and decoding engine for LXB, LXH, LXW, LXBU, and LXHU instructions. They were for some reason forgotten in previous commits. The MXU opcode list and decoding engine should be now complete. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau1-6/+8
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-17target/mips: Disable R5900 supportAleksandar Markovic1-59/+0
Disable R5900 support. There are some outstanding issues related to ABI support and emulation accuracy, that were not understood well during review process. Disable to avoid backward compatibility issues. Reverts commit ed4f49ba9bb56ebca6987b1083255daf6c89b5de. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Rename MMI-related functionsAleksandar Markovic1-16/+16
Rename MMI-related functions. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Rename MMI-related opcodesAleksandar Markovic1-236/+236
Rename MMI-related opcodes. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Rename MMI-related masksAleksandar Markovic1-10/+10
Rename MMI-related masks. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Guard check_insn with INSN_R5900 checkFredrik Noring1-3/+6
Explicitely mark handling of PREF instruction for R5900 as treating the same as NOP. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Guard check_insn_opc_user_only with INSN_R5900 checkFredrik Noring1-4/+12
Avoid using check_opc_user_only() as a decision making code wrt various architectures. Use ctx->insn_flags checks instead. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Fix decoding mechanism of special R5900 opcodesFredrik Noring1-4/+50
MOVN, MOVZ, MFHI, MFLO, MTHI, MTLO, MULT, MULTU, DIV, DIVU, DMULT, DMULTU, DDIV, DDIVU and JR are decoded in decode_opc_special_tx79 instead of the generic decode_opc_special_legacy. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Fix decoding mechanism of R5900 DIV1 and DIVU1Fredrik Noring1-6/+59
DIV1 and DIVU1 are generated in gen_div1_tx79 instead of the generic gen_muldiv. Signed-off-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17target/mips: Fix decoding mechanism of R5900 MFLO1, MFHI1, MTLO1 and MTHI1Fredrik Noring1-11/+40
MFLO1, MFHI1, MTLO1 and MTHI1 are generated in gen_HILO1_tx79 instead of the generic gen_HILO. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Amend MXU ASE overview noteAleksandar Markovic1-10/+74
Add prefix, suffix, operation descriptions, and other corrections and amendments to the comment that describes MXU ASE. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Move MXU_EN check one level higherAleksandar Markovic1-271/+238
Move MXU_EN check to the main MXU decoding function, to avoid code repetition. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instructions S32LDD and S32LDDRCraig Janeczek1-7/+47
Add support for emulating the S32LDD and S32LDDR MXU instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instructions Q8MUL and Q8MULSUCraig Janeczek1-7/+94
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instruction D16MACCraig Janeczek1-3/+87
Add support for emulating the D16MAC MXU instruction. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instruction D16MULCraig Janeczek1-3/+63
Add support for emulating the D16MUL MXU instruction. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instruction S8LDDCraig Janeczek1-3/+87
Add support for emulating the S8LDD MXU instruction. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Move MUL, S32M2I, S32I2M handling out of main MXU switchAleksandar Markovic1-18/+23
Move MUL, S32M2I, S32I2M handling out of switch. These are all instructions that do not depend on MXU_EN flag of MXU_CR. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29target/mips: Add emulation of MXU instructions S32I2M and S32M2ICraig Janeczek1-6/+85
Add support for emulating the S32I2M and S32M2I MXU instructions. This commit also contains utility functions for reading/writing to MXU registers. This is required for overall MXU instruction support. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Craig Janeczek <jancraig@amazon.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.1 at 2024-12-26 08:39:04 +0000