aboutsummaryrefslogtreecommitdiff
path: root/target/microblaze
AgeCommit message (Collapse)AuthorFilesLines
2020-05-14target/microblaze: monitor: Increase the number of registers reportedJoe Komlodi1-2/+14
Increase the number of registers reported to match GDB. Registers that aren't modeled are reported as 0. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <1589393329-223076-4-git-send-email-komlodi@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-05-14target/microblaze: gdb: Fix incorrect SReg reportingJoe Komlodi1-10/+49
SRegs used to be reported to GDB by iterating over the SRegs array, however we do not store them in an order that allows them to be reported to GDB in that way. To fix this, a simple map is used to map the register GDB wants to its location in the SRegs array. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <1589393329-223076-3-git-send-email-komlodi@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-05-14target/microblaze: gdb: Extend the number of registers presented to GDBJoe Komlodi2-4/+50
Increase the number of Microblaze registers QEMU will report when talking to GDB. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <1589393329-223076-2-git-send-email-komlodi@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-05-14target/microblaze: Fix FPU2 instruction checkJoe Komlodi1-1/+1
The check to see if we can use FPU2 instructions would return 0 if cfg.use_fpu == 2, rather than returning the PVR2_USE_FPU2_MASK. This would cause all FPU2 instructions (fsqrt, flt, fint) to not be used. Signed-off-by: Joe Komlodi <komlodi@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <1589219346-106769-2-git-send-email-komlodi@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-05-14target/microblaze: Add MFS Rd,EDR translationTong Ho1-0/+1
This is to fix cpu-abort with 'qemu: fatal: unknown mfs reg d' (in the default case) when microblaze guest issues 'MFS Rd,EDR' instruction. Since embeddedsw release 2019.2, XPlm_ExceptionHandler() issues the instruction on exception, and microblaze model aborts when PLM firmware guest encounters an exception. Signed-off-by: Tong Ho <tong.ho@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200512143649.21655-2-edgar.iglesias@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the pvr-user2 propertyEdgar E. Iglesias2-0/+3
Add the pvr-user2 property to control the user-defined PVR1 User2 register. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the pvr-user1 propertyEdgar E. Iglesias2-1/+4
Add the pvr-user1 property to control the user-defined PVR0 User1 field. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the unaligned-exceptions propertyEdgar E. Iglesias3-2/+7
Add the unaligned-exceptions property to control if the core traps unaligned memory accesses. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the div-zero-exception propertyEdgar E. Iglesias3-2/+8
Add the div-zero-exception property to control if the core traps divizions by zero. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the ill-opcode-exception propertyEdgar E. Iglesias3-1/+6
Add the ill-opcode-exception property to control if illegal instructions will raise exceptions. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-30target/microblaze: Add the opcode-0x0-illegal CPU propertyEdgar E. Iglesias3-2/+7
Add the opcode-0x0-illegal CPU property to control if the core should trap opcode zero as illegal. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-04-29various: Remove suspicious '\' character outside of #define in C codePhilippe Mathieu-Daudé1-7/+7
Fixes the following coccinelle warnings: $ spatch --sp-file --verbose-parsing ... \ scripts/coccinelle/remove_local_err.cocci ... SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213 SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329 SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133 SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081 SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529 SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468 SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173 Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200412223619.11284-2-f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-19Merge remote-tracking branch ↵Peter Maydell2-5/+5
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue for 5.0 soft freeze Bug fixes: * memory encryption: Disable mem merge (Dr. David Alan Gilbert) Features: * New EPYC CPU definitions (Babu Moger) * Denventon-v2 CPU model (Tao Xu) * New 'note' field on versioned CPU models (Tao Xu) Cleanups: * x86 CPU topology cleanups (Babu Moger) * cpu: Use DeviceClass reset instead of a special CPUClass reset (Peter Maydell) # gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids hw/i386: Update structures to save the number of nodes per package hw/i386: Remove unnecessary initialization in x86_cpu_new machine: Add SMP Sockets in CpuTopology hw/i386: Consolidate topology functions hw/i386: Introduce X86CPUTopoInfo to contain topology info cpu: Use DeviceClass reset instead of a special CPUClass reset machine/memory encryption: Disable mem merge hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs i386: Add 2nd Generation AMD EPYC processors i386: Add missing cpu feature bits in EPYC model target/i386: Add new property note to versioned CPU models target/i386: Add Denverton-v2 (no MPX) CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17cpu: Use DeviceClass reset instead of a special CPUClass resetPeter Maydell2-5/+5
The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-03-17gdbstub: extend GByteArray to read register helpersAlex Bennée2-2/+2
Instead of passing a pointer to memory now just extend the GByteArray to all the read register helpers. They can then safely append their data through the normal way. We don't bother with this abstraction for write registers as we have already ensured the buffer being copied from is the correct size. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24cpu: Use cpu_class_set_parent_reset()Greg Kurz1-2/+1
Convert all targets to use cpu_class_set_parent_reset() with the following coccinelle script: @@ type CPUParentClass; CPUParentClass *pcc; CPUClass *cc; identifier parent_fn; identifier child_fn; @@ +cpu_class_set_parent_reset(cc, child_fn, &pcc->parent_fn); -pcc->parent_fn = cc->reset; ... -cc->reset = child_fn; Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <157650847817.354886.7047137349018460524.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-15tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé1-1/+1
We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15target/microblaze: Remove MMU_MODE{0,1,2}_SUFFIXRichard Henderson1-3/+0
The functions generated by these macros are unused. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-12-18qemu_log_lock/unlock now preserves the qemu_logfile handle.Robert Foley1-2/+2
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a handle to unlock. This allows for changing the handle during logging and ensures the lock() and unlock() are for the same file. Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock() calls (and the log("\n")), since the translator can longjmp out of the loop if it attempts to translate an instruction in an inaccessible page. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
2019-11-12target/microblaze: Plug temp leak around eval_cond_jmp()Edgar E. Iglesias1-1/+4
Plug temp leak around eval_cond_jmp(). Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2019-11-12target/microblaze: Plug temp leaks with delay slot setupEdgar E. Iglesias1-12/+14
Plug temp leaks with delay slot setup. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2019-11-12target/microblaze: Plug temp leaks for loads/storesEdgar E. Iglesias1-26/+20
Simplify endian reversion of address also plugging TCG temp leaks for loads/stores. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2019-09-03tcg: TCGMemOp is now accelerator independent MemOpTony Nguyen1-2/+2
Preparation for collapsing the two byte swaps, adjust_endianness and handle_bswap, along the I/O path. Target dependant attributes are conditionalized upon NEED_CPU_H. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-08-22Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-08-21' ↵Peter Maydell1-1/+1
into staging Monitor patches for 2019-08-21 # gpg: Signature made Wed 21 Aug 2019 16:35:07 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2019-08-21: monitor/qmp: Update comment for commit 4eaca8de268 qdev: Collect HMP handlers command handlers in qdev-monitor.c qapi: Move query-target from misc.json to machine.json hw/core: Move cpu.c, cpu.h from qom/ to hw/core/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster1-1/+1
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-20icount: remove unnecessary gen_io_end callsPavel Dovgalyuk1-2/+0
Prior patch resets can_do_io flag at the TB entry. Therefore there is no need in resetting this flag at the end of the block. This patch removes redundant gen_io_end calls. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
2019-08-19targets (various): use softfloat-helpers.h where we canAlex Bennée1-1/+1
Generally the cpu and non-FP helper files just want to manipulate the softfloat flags. For this they can just use the -helpers.h include which brings in a minimal number of inline helpers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Supply missing header guardsMarkus Armbruster2-0/+9
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster2-2/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-10cpu: Remove CPU_COMMONRichard Henderson1-2/+0
This macro is now always empty, so remove it. This leaves the entire contents of CPUArchState under the control of the guest architecture. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce CPUNegativeOffsetStateRichard Henderson1-2/+3
Nothing in there so far, but all of the plumbing done within the target ArchCPU state. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce cpu_set_cpustate_pointersRichard Henderson1-2/+1
Consolidate some boilerplate from foo_cpu_initfn. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move ENV_OFFSET to exec/gen-icount.hRichard Henderson1-1/+0
Now that we have ArchCPU, we can define this generically, in the one place that needs it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/microblaze: Use env_cpu, env_archcpuRichard Henderson4-25/+19
Cleanup in the boilerplate that each target must define. Replace mb_env_get_cpu with env_archcpu. The combination CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Move cpu_mmu_index below the include of "exec/cpu-all.h", so that the definition of env_archcpu is available. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson1-2/+0
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define ArchCPURichard Henderson1-0/+1
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define CPUArchState with typedefRichard Henderson1-3/+2
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Split out target/arch/cpu-param.hRichard Henderson2-12/+20
For all targets, into this new file move TARGET_LONG_BITS, TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS, TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES. Include this new file from exec/cpu-defs.h. This now removes the somewhat odd requirement that target/arch/cpu.h defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the bulk of the includes within target/arch/cpu.h to the top. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson1-6/+0
We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/microblaze: Convert to CPUClass::tlb_fillRichard Henderson4-74/+62
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg: Hoist max_insns computation to tb_gen_codeRichard Henderson1-9/+1
In order to handle TB's that translate to too much code, we need to place the control of the length of the translation in the hands of the code gen master loop. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster3-22/+22
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-01-22target/microblaze: Add props enabling exceptions on failed bus accessesEdgar E. Iglesias2-1/+13
Add MicroBlaze CPU properties to enable exceptions on failed bus accesses. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2019-01-22target/microblaze: Switch to transaction_failed hookPeter Maydell3-14/+17
Switch the microblaze target from the old unassigned_access hook to the transaction_failed hook. The notable difference is that rather than it being called for all physical memory accesses which fail (including those made by DMA devices or by the gdbstub), it is only called for those made by the CPU via its MMU. For microblaze this makes no difference because none of the target CPU code needs to make loads or stores by physical address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [EI: Add space in qemu_log()] Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-06-15target-microblaze: Rework NOP/zero instruction handlingEdgar E. Iglesias1-11/+4
Remove the abort on a sequence of NOP/zero instructions. Always return early and avoid decoding NOP/zero instructions. This fixes Coverity CID 1391443. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-06-15target-microblaze: mmu: Correct masking of output addressesEdgar E. Iglesias1-1/+0
Correct the masking of output addresses. This fixes Coverity CID 1391441. Fixes: commit 3924a9aa02 Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson1-3/+3
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-29target-microblaze: Consolidate MMU enabled checksEdgar E. Iglesias2-4/+6
Consolidate MMU enabled checks to cpu_mmu_index(). No functional changes. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>