aboutsummaryrefslogtreecommitdiff
path: root/target/i386/helper.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-22target/i386: add control bits support for LAMBinbin Wu1-0/+4
LAM uses CR3[61] and CR3[62] to configure/enable LAM on user pointers. LAM uses CR4[28] to configure/enable LAM on supervisor pointers. For CR3 LAM bits, no additional handling needed: - TCG LAM is not supported for TCG of target-i386. helper_write_crN() and helper_vmrun() check max physical address bits before calling cpu_x86_update_cr3(), no change needed, i.e. CR3 LAM bits are not allowed to be set in TCG. - gdbstub x86_cpu_gdb_write_register() will call cpu_x86_update_cr3() to update cr3. Allow gdb to set the LAM bit(s) to CR3, if vcpu doesn't support LAM, KVM_SET_SREGS will fail as other reserved bits. For CR4 LAM bit, its reservation depends on vcpu supporting LAM feature or not. - TCG LAM is not supported for TCG of target-i386. helper_write_crN() and helper_vmrun() check CR4 reserved bit before calling cpu_x86_update_cr4(), i.e. CR4 LAM bit is not allowed to be set in TCG. - gdbstub x86_cpu_gdb_write_register() will call cpu_x86_update_cr4() to update cr4. Mask out LAM bit on CR4 if vcpu doesn't support LAM. - x86_cpu_reset_hold() doesn't need special handling. Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Xuelian Guo <xuelian.guo@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240112060042.19925-3-binbin.wu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-06accel/tcg: Access tcg_cflags with getter / setterPhilippe Mathieu-Daudé1-1/+1
Access the CPUState::tcg_cflags via tcg_cflags_has() and tcg_cflags_set() helpers. Mechanical change using the following Coccinelle spatch script: @@ expression cpu; expression flags; @@ - cpu->tcg_cflags & flags + tcg_cflags_has(cpu, flags) @@ expression cpu; expression flags; @@ - (tcg_cflags_has(cpu, flags)) + tcg_cflags_has(cpu, flags) @@ expression cpu; expression flags; @@ - cpu->tcg_cflags |= flags; + tcg_cflags_set(cpu, flags); Then manually moving the declarations, and adding both tcg_cflags_has() and tcg_cflags_set() definitions. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240427155714.53669-15-philmd@linaro.org>
2024-03-20target/i386: Revert monitor_puts() in do_inject_x86_mce()Tao Su1-1/+1
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce() may have a parameter with NULL monitor pointer. Revert monitor_puts() in do_inject_x86_mce() to fix, then the fact that we send the same message to monitor and log is again more obvious. Fixes: bf0c50d4aa85 (monitor: expose monitor_puts to rest of code) Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Tao Su <tao1.su@linux.intel.com> Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-09-07target/i386/helper: Restrict KVM declarations to system emulationPhilippe Mathieu-Daudé1-1/+1
User emulation doesn't need any KVM declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230904124325.79040-5-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-13target/i386/helper: Shuffle do_cpu_init()Philippe Mathieu-Daudé1-8/+4
Move the #ifdef'ry inside do_cpu_init() instead of declaring an empty stub for user emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230602224628.59546-3-philmd@linaro.org>
2023-06-13target/i386/helper: Remove do_cpu_sipi() stub for user-mode emulationPhilippe Mathieu-Daudé1-3/+0
Since commit 604664726f ("target/i386: Restrict cpu_exec_interrupt() handler to sysemu"), do_cpu_sipi() isn't called anymore on user emulation. Remove the now pointless stub. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230602224628.59546-2-philmd@linaro.org>
2023-06-05tcg: Add insn_start_words to TCGContextRichard Henderson1-1/+1
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c. Split out "tcg/insn-start-words.h" and use it in target/. Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05*: Add missing includes of tcg/tcg.hRichard Henderson1-0/+3
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h, but the include of tcg.h will be removed. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-01target/i386: Replace `TARGET_TB_PCREL` with `CF_PCREL`Anton Johansson1-1/+1
Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230227135202.9710-8-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-11-01target/i386: Use cpu_unwind_state_data for tpr accessRichard Henderson1-2/+23
Avoid cpu_restore_state, and modifying env->eip out from underneath the translator with TARGET_TB_PCREL. There is some slight duplication from x86_restore_state_to_opc, but it's just a few lines. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1269 Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-10-18target/i386: add AVX_EN hflagPaul Brook1-0/+12
Add a new hflag bit to determine whether AVX instructions are allowed Signed-off-by: Paul Brook <paul@nowt.org> Message-Id: <20220424220204.2493824-4-paul@nowt.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-06monitor: expose monitor_puts to rest of codeAlex Bennée1-1/+1
This helps us construct strings elsewhere before echoing to the monitor. It avoids having to jump through hoops like: monitor_printf(mon, "%s", s->str); It will be useful in following patches but for now convert all existing plain "%s" printfs to use the _puts api. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
2022-02-22Merge remote-tracking branch ↵Peter Maydell1-0/+1
'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging * Improve virtio-net failover test * Some small fixes for the qtests * Misc header cleanups by Philippe # gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits) hw/tricore: Remove unused and incorrect header hw/m68k/mcf: Add missing 'exec/hwaddr.h' header exec/exec-all: Move 'qemu/log.h' include in units requiring it softmmu/runstate: Clean headers linux-user: Add missing "qemu/timer.h" include target: Add missing "qemu/timer.h" include core/ptimers: Remove unnecessary 'sysemu/cpus.h' include exec/ramblock: Add missing includes qtest: Add missing 'hw/qdev-core.h' include hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header hw/remote: Add missing include hw/tpm: Clean includes scripts: Remove the old switch-timer-api script tests/qtest: failover: migration abort test with failover off tests/qtest: failover: test migration if the guest doesn't support failover tests/qtest: failover: check migration with failover off tests/qtest: failover: check missing guest feature tests/qtest: failover: check the feature is correctly provided tests/qtest: failover: use a macro for check_one_card() tests/qtest: failover: clean up pathname of tests ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-21exec/exec-all: Move 'qemu/log.h' include in units requiring itPhilippe Mathieu-Daudé1-0/+1
Many files use "qemu/log.h" declarations but neglect to include it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is a core component and shouldn't be used that way. Move the "qemu/log.h" inclusion locally to each unit requiring it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220207082756.82600-10-f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-16target/i386: add TCG support for UMIPGareth Webb1-1/+7
Signed-off-by: Gareth Webb <gareth.webb@umbralsoftware.co.uk> Message-Id: <164425598317.21902.4257759159329756142-1@git.sr.ht> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10i386: make cpu_load_efer sysemu-onlyClaudio Fontana1-0/+13
cpu_load_efer is now used only for sysemu code. Therefore, move this function implementation to sysemu-only section of helper.c Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210322132800.7470-22-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-04Add NVMM accelerator: acceleration enlightenmentsReinoud Zandijk1-1/+1
Signed-off-by: Kamil Rytarowski <kamil@NetBSD.org> Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org> Message-Id: <20210402202535.11550-4-reinoud@NetBSD.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08target/i86: implement PKSPaolo Bonzini1-0/+3
Protection Keys for Supervisor-mode pages is a simple extension of the PKU feature that QEMU already implements. For supervisor-mode pages, protection key restrictions come from a new MSR. The MSR has no XSAVE state associated to it. PKS is only respected in long mode. However, in principle it is possible to set the MSR even outside long mode, and in fact even the XSAVE state for PKRU could be set outside long mode using XRSTOR. So do not limit the migration subsections for PKRU and PKRS to long mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-16i386: move TCG cpu class initialization to tcg/Claudio Fontana1-23/+0
to do this, we need to take code out of cpu.c and helper.c, and also move some prototypes from cpu.h, for code that is needed in tcg/xxx_helper.c, and which in turn is part of the callbacks registered by the class initialization. Therefore, do some shuffling of the parts of cpu.h that are only relevant for tcg/, and put them in tcg/helper-tcg.h For FT0 and similar macros, put them in tcg/fpu-helper.c since they are used only there. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201212155530.23098-8-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-16i386: move cpu dump out of helper.c into cpu-dump.cClaudio Fontana1-514/+0
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201212155530.23098-7-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-16i386: move kvm accel files into kvm/Claudio Fontana1-1/+1
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201212155530.23098-2-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-11-16target/i386: avoid theoretical leak on MCE injectionPaolo Bonzini1-6/+4
g_strdup_printf is used twice to write to the same variable, which can theoretically cause a leak. In practice, it is extremely unlikely that a guest is seeing a recursive MCE and has disabled CR4.MCE between the first and the second error, but we can fix it and we can also make a slight improvement on the logic: CR4.MCE=0 causes a triple fault even for a non-recursive machine check, so let's place its test first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15x86 tcg cpus: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023122801.19514-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-04target-i386: post memory failure event to QMPzhenwei pi1-4/+20
Post memory failure event through QMP to handle hardware memory corrupted event. Rather than simply printing to the log, QEMU could report more effective message to the client. For example, if a guest receives an MCE, evacuating the host could be a good idea. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200930100440.1060708-4-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-04target-i386: seperate MCIP & MCE_MASK error reasonzhenwei pi1-7/+18
Previously we would only get a simple string "Triple fault" in qemu log. Add detailed message for the two reasons to describe why qemu has to reset the guest. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200930100440.1060708-2-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10apic: Report current_count via 'info lapic'Jan Kiszka1-2/+3
This is helpful when debugging stuck guest timers. As we need apic_get_current_count for that, and it is really not emulation specific, move it to apic_common.c and export it. Fix its style at this chance as well. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <e00e2896-ca5b-a929-de7a-8e5762f0c1c2@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10target/i386: fix IEEE SSE floating-point exception raisingJoseph Myers1-0/+1
The SSE instruction implementations all fail to raise the expected IEEE floating-point exceptions because they do nothing to convert the exception state from the softfloat machinery into the exception flags in MXCSR. Fix this by adding such conversions. Unlike for x87, emulated SSE floating-point operations might be optimized using hardware floating point on the host, and so a different approach is taken that is compatible with such optimizations. The required invariant is that all exceptions set in env->sse_status (other than "denormal operand", for which the SSE semantics are different from those in the softfloat code) are ones that are set in the MXCSR; the emulated MXCSR is updated lazily when code reads MXCSR, while when code sets MXCSR, the exceptions in env->sse_status are set accordingly. A few instructions do not raise all the exceptions that would be raised by the softfloat code, and those instructions are made to save and restore the softfloat exception state accordingly. Nothing is done about "denormal operand"; setting that (only for the case when input denormals are *not* flushed to zero, the opposite of the logic in the softfloat code for such an exception) will require custom code for relevant instructions, or else architecture-specific conditionals in the softfloat code for when to set such an exception together with custom code for various SSE conversion and rounding instructions that do not set that exception. Nothing is done about trapping exceptions (for which there is minimal and largely broken support in QEMU's emulation in the x87 case and no support at all in the SSE case). Signed-off-by: Joseph Myers <joseph@codesourcery.com> Message-Id: <alpine.DEB.2.21.2006252358000.3832@digraph.polyomino.org.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-04Fix wrong behavior of cpu_memory_rw_debug() function in SMMDmitry Poletaev1-1/+4
There is a problem, that you don't have access to the data using cpu_memory_rw_debug() function when in SMM. You can't remotely debug SMM mode program because of that for example. Likely attrs version of get_phys_page_debug should be used to get correct asidx at the end to handle access properly. Here the patch to fix it. Signed-off-by: Dmitry Poletaev <poletaev@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-1/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster1-0/+1
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-10target/i386: Use env_cpu, env_archcpuRichard Henderson1-10/+6
Cleanup in the boilerplate that each target must define. Replace x86_env_get_cpu with env_archcpu. The combination CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster1-139/+138
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18target/i386: Simplify how x86_cpu_dump_local_apic_state() printsMarkus Armbruster1-43/+38
x86_cpu_dump_local_apic_state() takes an fprintf()-like callback and a FILE * to pass to it, and so do its helper functions. Its only caller hmp_info_local_apic() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The type-punning is ugly. Drop the callback, and call qemu_printf() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-12-armbru@redhat.com>
2018-04-11icount: fix cpu_restore_state_from_tb for non-tb-exit casesPavel Dovgalyuk1-1/+1
In icount mode, instructions that access io memory spaces in the middle of the translation block invoke TB recompilation. After recompilation, such instructions become last in the TB and are allowed to access io memory spaces. When the code includes instruction like i386 'xchg eax, 0xffffd080' which accesses APIC, QEMU goes into an infinite loop of the recompilation. This instruction includes two memory accesses - one read and one write. After the first access, APIC calls cpu_report_tpr_access, which restores the CPU state to get the current eip. But cpu_restore_state_from_tb resets the cpu->can_do_io flag which makes the second memory access invalid. Therefore the second memory access causes a recompilation of the block. Then these operations repeat again and again. This patch moves resetting cpu->can_do_io flag from cpu_restore_state_from_tb to cpu_loop_exit* functions. It also adds a parameter for cpu_restore_state which controls restoring icount. There is no need to restore icount when we only query CPU state without breaking the TB. Restoring it in such cases leads to the incorrect flow of the virtual time. In most cases new parameter is true (icount should be recalculated). But there are two cases in i386 and openrisc when the CPU state is only queried without the need to break the TB. This patch fixes both of these cases. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox> [rth: Make can_do_io setting unconditional; move from cpu_exec; make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-07Add the WHPX acceleration enlightenmentsJustin Terry (VM)1-1/+1
Implements the WHPX accelerator cpu enlightenments to actually use the whpx-all accelerator on Windows platforms. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-5-git-send-email-juterry@microsoft.com> [Register/unregister VCPU thread with RCU. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05target/i386: add the tcg_enabled() in target/i386/Yang Zhong1-1/+1
Add the tcg_enabled() where the x86 target needs to disable TCG-specific code. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05target/i386: move TLB refill function out of helper.cPaolo Bonzini1-343/+1
This function calls tlb_set_page_with_attrs, which is not available when TCG is disabled. Move it to excp_helper.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05target/i386: move cpu_sync_bndcs_hflags() functionYang Zhong1-0/+30
Move cpu_sync_bndcs_hflags() function from mpx_helper.c to helper.c because mpx_helper.c need be disabled when tcg is disabled. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07target/i386: use multiple CPU AddressSpacesPaolo Bonzini1-27/+27
This speeds up SMM switches. Later on it may remove the need to take the BQL, and it may also allow to reuse code between TCG and KVM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07target/i386: enable A20 automatically in system management modePaolo Bonzini1-19/+23
Ignore env->a20_mask when running in system management mode. Reported-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1494502528-12670-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake1-1/+1
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-02target-i386: fix "info lapic" segfault on isapcTejaswini Poluri1-0/+4
Start QEMU with "qemu-system-x86_64 -nographic -M isapc -serial none-monitor stdio" and enter "info lapic" at the monitor prompt ⇒ Segmentation fault Signed-off-by: Tejaswini Poluri <tejaswinipoluri3@gmail.com> Message-Id: <1490685583-16987-1-git-send-email-tejaswinipoluri3@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+1
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-19kvm: move cpu synchronization codeVincent Palatin1-0/+1
Move the generic cpu_synchronize_ functions to the common hw_accel.h header, in order to prepare for the addition of a second hardware accelerator. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-13cputlb: drop flush_global flag from tlb_flushAlex Bennée1-4/+4
We have never has the concept of global TLB entries which would avoid the flush so we never actually use this flag. Drop it and make clear that tlb_flush is the sledge-hammer it has always been. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> [DG: ppc portions] Acked-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-22x86: implement la57 paging modeKirill A. Shutemov1-9/+45
The new paging more is extension of IA32e mode with more additional page table level. It brings support of 57-bit vitrual address space (128PB) and 52-bit physical address space (4PB). The structure of new page table level is identical to pml4. The feature is enumerated with CPUID.(EAX=07H, ECX=0):ECX[bit 16]. CR4.LA57[bit 12] need to be set when pageing enables to activate 5-level paging mode. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Message-Id: <20161215001305.146807-1-kirill.shutemov@linux.intel.com> [Drop changes to target-i386/translate.c. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-0/+1446
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2025-08-11 07:24:33 +0000