aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08target/arm: Make '-cpu max' have a 48-bit PAPeter Maydell1-0/+4
QEMU supports a 48-bit physical address range, but we don't currently expose it in the '-cpu max' ID registers (you get the same range as Cortex-A57, which is 44 bits). Set the ID_AA64MMFR0.PARange field to indicate 48 bits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
2020-10-08hw/arm/virt: Implement kvm-steal-timeAndrew Jones6-6/+131
We add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20201001061718.101915-7-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08target/arm/kvm: Make uncalled stubs explicitly unreachableAndrew Jones1-19/+32
When we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by kvm_enabled(), but should also be robust to refactoring mistakes. Putting a g_assert_not_reached() in the function should help. Additionally, the g_assert_not_reached() calls may actually help the linker remove some code. We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in kvm.c Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20201001061718.101915-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-05icount: rename functions to be consistent with the module nameClaudio Fontana1-2/+2
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpu-timers, icount: new modulesClaudio Fontana1-1/+2
refactoring of cpus.c continues with cpu timer state extraction. cpu-timers: responsible for the softmmu cpu timers state, including cpu clocks and ticks. icount: counts the TCG instructions executed. As such it is specific to the TCG accelerator. Therefore, it is built only under CONFIG_TCG. One complication is due to qtest, which uses an icount field to warp time as part of qtest (qtest_clock_warp). In order to solve this problem, provide a separate counter for qtest. This requires fixing assumptions scattered in the code that qtest_enabled() implies icount_enabled(), checking each specific case. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [remove redundant initialization with qemu_spice_init] Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [fix lingering calls to icount_get] Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-01target/arm: Fix SVE spliceRichard Henderson1-1/+1
While converting to gen_gvec_ool_zzzp, we lost passing a->esz as the data argument to the function. Fixes: 36cbb7a8e71 Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200918000500.2690937-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01target/arm: Fix sve ldr/strRichard Henderson1-2/+2
The mte update missed a bit when producing clean addresses. Fixes: b2aa8879b88 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200916014102.2446323-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01target/arm: Make isar_feature_aa32_fp16_arith() handle M-profilePeter Maydell1-5/+26
The M-profile definition of the MVFR1 ID register differs slightly from the A-profile one, and in particular the check for "does the CPU support fp16 arithmetic" is not the same. We don't currently implement any M-profile CPUs with fp16 arithmetic, so this is not yet a visible bug, but correcting the logic now disarms this beartrap for when we eventually do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-6-peter.maydell@linaro.org
2020-10-01target/arm: Add ID register values for Cortex-M0Peter Maydell1-0/+24
Give the Cortex-M0 ID register values corresponding to its implemented behaviour. These will not be guest-visible but will be used to govern the behaviour of QEMU's emulation. We use the same values that the Cortex-M3 does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
2020-10-01target/arm: Move id_pfr0, id_pfr1 into ARMISARegistersPeter Maydell6-38/+42
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters sub-struct. We're going to want id_pfr1 for an isar_features check, and moving both at the same time avoids an odd inconsistency. Changes other than the ones to cpu.h and kvm64.c made automatically with: perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
2020-10-01target/arm: Replace ARM_FEATURE_PXN with ID_MMFR0.VMSA checkPeter Maydell3-4/+17
The ARM_FEATURE_PXN bit indicates whether the CPU supports the PXN bit in short-descriptor translation table format descriptors. This is indicated by ID_MMFR0.VMSA being at least 0b0100. Replace the feature bit with an ID register check, in line with our preference for ID register checks over feature bits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-2-peter.maydell@linaro.org
2020-09-24Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-3/+3
staging Pull request This includes the atomic_ -> qatomic_ rename that touches many files and is prone to conflicts. # gpg: Signature made Wed 23 Sep 2020 17:08:43 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: qemu/atomic.h: rename atomic_ to qatomic_ tests: add test-fdmon-epoll fdmon-poll: reset npfd when upgrading to fdmon-epoll gitmodules: add qemu.org vbootrom submodule gitmodules: switch to qemu.org meson mirror gitmodules: switch to qemu.org qboot mirror docs/system: clarify deprecation schedule virtio-crypto: don't modify elem->in/out_sg virtio-blk: undo destructive iov_discard_*() operations util/iov: add iov_discard_undo() virtio: add vhost-user-fs-ccw device libvhost-user: handle endianness as mandated by the spec MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi1-3/+3
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-22qom: simplify object_find_property / object_class_find_propertyDaniel P. Berrangé1-1/+1
When debugging QEMU it is often useful to put a breakpoint on the error_setg_internal method impl. Unfortunately the object_property_add / object_class_property_add methods call object_property_find / object_class_property_find methods to check if a property exists already before adding the new property. As a result there are a huge number of calls to error_setg_internal on startup of most QEMU commands, making it very painful to set a breakpoint on this method. Most callers of object_find_property and object_class_find_property, however, pass in a NULL for the Error parameter. This simplifies the methods to remove the Error parameter entirely, and then adds some new wrapper methods that are able to raise an Error when needed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200914135617.1493072-1-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18qom: Remove module_obj_name parameter from OBJECT_DECLARE* macrosEduardo Habkost1-1/+1
One of the goals of having less boilerplate on QOM declarations is to avoid human error. Requiring an extra argument that is never used is an opportunity for mistakes. Remove the unused argument from OBJECT_DECLARE_TYPE and OBJECT_DECLARE_SIMPLE_TYPE. Coccinelle patch used to convert all users of the macros: @@ declarer name OBJECT_DECLARE_TYPE; identifier InstanceType, ClassType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_TYPE(InstanceType, ClassType, - lowercase, UPPERCASE); @@ declarer name OBJECT_DECLARE_SIMPLE_TYPE; identifier InstanceType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_SIMPLE_TYPE(InstanceType, - lowercase, UPPERCASE); Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200916182519.415636-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18target/arm: Set instance_align on CPUARM TypeInfoRichard Henderson1-0/+2
Fix alignment of CPUARMState.vfp.zregs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200916004638.2444147-4-richard.henderson@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16util: rename qemu_open() to qemu_open_old()Daniel P. Berrangé1-1/+1
We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-14target/arm: Count PMU events when MDCR.SPME is setAaron Lindsay1-1/+1
This check was backwards when introduced in commit 033614c47de78409ad3fb39bb7bd1483b71c6789: target/arm: Filter cycle counter based on PMCCFILTR_EL0 Cc: qemu-stable@nongnu.org Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14target/arm: Remove no-longer-reachable 32-bit KVM codePeter Maydell4-80/+53
Now that 32-bit KVM host support is gone, KVM can never be enabled unless CONFIG_AARCH64 is true, and some code paths are no longer reachable and can be deleted. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200904154156.31943-3-peter.maydell@linaro.org
2020-09-14target/arm: Remove KVM support for 32-bit Arm hostsPeter Maydell2-599/+1
We deprecated the support for KVM on 32-bit Arm hosts in time for release 5.0, which means that our deprecation policy allows us to drop it in release 5.2. Remove the code. To repeat the rationale from the deprecation note: the Linux kernel dropped support for 32-bit Arm KVM hosts in 5.7. Running 32-bit guests on a 64-bit Arm host remains supported. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
2020-09-14target/arm: Convert VCMLA, VCADD size field to MO_* in decodePeter Maydell2-16/+24
The VCMLA and VCADD insns have a size field which is 0 for fp16 and 1 for fp32 (note that this is the reverse of the Neon 3-same encoding!). Convert it to MO_* values in decode for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
2020-09-14target/arm: Convert Neon VCVT fp size field to MO_* in decodePeter Maydell2-4/+3
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats to pass the size through to the trans function as a MO_* value rather than the '0==f32, 1==f16' used in the fp 3-same encodings. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
2020-09-14target/arm: Convert Neon 3-same-fp size field to MO_* in decodePeter Maydell2-10/+21
In the Neon instructions, some instruction formats have a 2-bit size field which corresponds exactly to QEMU's MO_8/16/32/64. However the floating-point insns in the 3-same group have a 1-bit size field which is "0 for 32-bit float and 1 for 16-bit float". Currently we pass these values directly through to trans_ functions, which means that when reading a particular trans_ function you need to know if that insn uses a 2-bit size or a 1-bit size. Move the handling of the 1-bit size to the decodetree file, so that all these insns consistently pass a size to the trans_ function which is an MO_8/16/32/64 value. In this commit we switch over the insns using the 3same_fp and 3same_fp_q0 formats. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
2020-09-09Use OBJECT_DECLARE_TYPE where possibleEduardo Habkost1-4/+2
Replace DECLARE_OBJ_CHECKERS with OBJECT_DECLARE_TYPE where the typedefs can be safely removed. Generated running: $ ./scripts/codeconverter/converter.py -i \ --pattern=DeclareObjCheckers $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-16-ehabkost@redhat.com> Message-Id: <20200831210740.126168-17-ehabkost@redhat.com> Message-Id: <20200831210740.126168-18-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost2-14/+6
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost2-7/+11
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-08target/arm: Move setting of CPU halted state to generic codeThiago Jung Bauermann1-1/+0
This change is in a separate patch because it's not so obvious that it won't cause a regression. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-08target/arm: Move start-powered-off property to generic CPUStateThiago Jung Bauermann4-8/+4
There are other platforms which also have CPUs that start powered off, so generalize the start-powered-off property so that it can be used by them. Note that ARMv7MState also has a property of the same name but this patch doesn't change it because that class isn't a subclass of CPUState so it wouldn't be a trivial change. This change should not cause any change in behavior. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-02arm: Fix typo in AARCH64_CPU_GET_CLASS definitionEduardo Habkost1-1/+1
There's a typo in the type name of AARCH64_CPU_GET_CLASS. This was never detected because the macro is not used by any code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01Merge remote-tracking branch ↵Peter Maydell13-800/+1687
'remotes/pmaydell/tags/pull-target-arm-20200901' into staging target-arm queue: * Implement fp16 support for AArch32 VFP and Neon * hw/arm/sbsa-ref: add "reg" property to DT cpu nodes * hw/arm/sbsa-ref : Add embedded controller in secure memory # gpg: Signature made Tue 01 Sep 2020 16:17:23 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200901: (47 commits) hw/arm/sbsa-ref : Add embedded controller in secure memory hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref hw/arm/sbsa-ref: add "reg" property to DT cpu nodes target/arm: Enable FP16 in '-cpu max' target/arm: Implement fp16 for Neon VMUL, VMLA, VMLS target/arm/vec_helper: Add gvec fp indexed multiply-and-add operations target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operations target/arm: Implement fp16 for Neon VRINTX target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-mode target/arm: Implement fp16 for Neon VCVT with rounding modes target/arm: Implement fp16 for Neon VCVT fixed-point target/arm: Convert Neon VCVT fixed-point to gvec target/arm: Implement fp16 for Neon float-integer VCVT target/arm: Implement fp16 for Neon pairwise fp ops target/arm: Implement fp16 for Neon VRSQRTS target/arm: Implement fp16 for Neon VRECPS target/arm: Implement fp16 for Neon fp compare-vs-0 target/arm: Implement fp16 for Neon VFMA, VMFS target/arm: Implement fp16 for Neon VMLA, VMLS operations target/arm: Implement fp16 for Neon VMAXNM, VMINNM ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01target/arm: Enable FP16 in '-cpu max'Peter Maydell2-7/+6
Set the MVFR1 ID register FPHP and SIMDHP fields to indicate that our "-cpu max" has v8.2-FP16. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-46-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VMUL, VMLA, VMLSPeter Maydell1-55/+55
Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec, and use this to implement fp16 support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-45-peter.maydell@linaro.org
2020-09-01target/arm/vec_helper: Add gvec fp indexed multiply-and-add operationsPeter Maydell2-5/+32
Add gvec helpers for doing Neon-style indexed non-fused fp multiply-and-accumulate operations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200828183354.27913-44-peter.maydell@linaro.org
2020-09-01target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operationsPeter Maydell1-4/+8
In the gvec helper functions for indexed operations, for AArch32 Neon the oprsz (total size of the vector) can be less than 16 bytes if the operation is on a D reg. Since the inner loop in these helpers always goes from 0 to segment, we must clamp it based on oprsz to avoid processing a full 16 byte segment when asked to handle an 8 byte wide vector. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-43-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VRINTXPeter Maydell3-42/+9
Convert the Neon VRINTX insn to use gvec, and use this to implement fp16 support for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-42-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-modePeter Maydell4-79/+30
Convert the Neon VRINT-with-specified-rounding-mode insns to gvec, and use this to implement the fp16 versions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-41-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VCVT with rounding modesPeter Maydell3-67/+66
Convert the Neon VCVT with-specified-rounding-mode instructions to gvec, and use this to implement fp16 support for them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-40-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VCVT fixed-pointPeter Maydell4-1/+21
Implement fp16 for the Neon VCVT insns which convert between float and fixed-point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-39-peter.maydell@linaro.org
2020-09-01target/arm: Convert Neon VCVT fixed-point to gvecPeter Maydell3-17/+43
Convert the Neon VCVT float<->fixed-point insns to a gvec style, in preparation for adding fp16 support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-38-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon float-integer VCVTPeter Maydell3-11/+42
Convert the Neon float-integer VCVT insns to gvec, and use this to implement fp16 support for them. Note that unlike the VFP int<->fp16 VCVT insns we converted earlier and which convert to/from a 32-bit integer, these Neon insns convert to/from 16-bit integers. So we can use the existing vfp conversion helpers for the f32<->u32/i32 case but need to provide our own for f16<->u16/i16. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-37-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon pairwise fp opsPeter Maydell3-26/+68
Convert the Neon pairwise fp ops to use a single gvic-style helper to do the full operation instead of one helper call for each 32-bit part. This allows us to use the same framework to implement the fp16. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-36-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VRSQRTSPeter Maydell4-36/+34
Convert the Neon VRSQRTS insn to using a gvec helper, and use this to implement the fp16 case. As with VRECPS, we adjust the phrasing of the new implementation slightly so that the fp32 version parallels the fp16 one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-35-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VRECPSPeter Maydell4-34/+35
Convert the Neon VRECPS insn to using a gvec helper, and use this to implement the fp16 case. The phrasing of the new float32_recps_nf() is slightly different from the old recps_f32() so that it parallels the f16 version; for f16 we can't assume that flush-to-zero is always enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-34-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon fp compare-vs-0Peter Maydell3-28/+45
Convert the neon floating-point vector compare-vs-0 insns VCEQ0, VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to implement the fp16 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-33-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VFMA, VMFSPeter Maydell3-91/+40
Convert the neon floating-point vector operations VFMA and VFMS to use a gvec helper, and use this to implement the fp16 case. This is the last use of do_3same_fp() so we can now delete that function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-32-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VMLA, VMLS operationsPeter Maydell3-31/+50
Convert the Neon floating-point VMLA and VMLS insns over to using a gvec helper, and use this to implement the fp16 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-31-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VMAXNM, VMINNMPeter Maydell3-8/+27
Convert the Neon floating point VMAXNM and VMINNM insns to using a gvec helper and use this to implement the fp16 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-30-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for Neon VMAX, VMINPeter Maydell3-3/+14
Convert the Neon float-point VMAX and VMIN insns over to using a gvec helper, and use this to implement the fp16 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-29-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for VACGE, VACGTPeter Maydell3-2/+34
Convert the neon floating-point vector absolute comparison ops VACGE and VACGT over to using a gvec hepler and use this to implement the fp16 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-28-peter.maydell@linaro.org
2020-09-01target/arm: Implement fp16 for VCEQ, VCGE, VCGT comparisonsPeter Maydell3-3/+56
Convert the Neon floating-point vector comparison ops VCEQ, VCGE and VCGT over to using a gvec helper and use this to implement the fp16 case. (We put the float16_ceq() etc functions above the DO_2OP() macro definition because later when we convert the compare-against-zero instructions we'll want their definitions to be visible at that point in the source file.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200828183354.27913-27-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-01-04 02:04:22 +0000