aboutsummaryrefslogtreecommitdiff
path: root/target/arm
AgeCommit message (Collapse)AuthorFilesLines
2018-09-25target/arm: Start AArch32 CPUs with EL2 but not EL3 in Hyp modePeter Maydell1-2/+12
The ARMv8 architecture defines that an AArch32 CPU starts in SVC mode, unless EL2 is the highest available EL, in which case it starts in Hyp mode. (In ARMv7 a CPU with EL2 but not EL3 was not a valid configuration, but we don't specifically reject this if the user asks for one.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20180823135047.16525-1-peter.maydell@linaro.org
2018-09-25target/arm: Fix cpu_get_tb_cpu_state() for non-SVE CPUsRichard Henderson1-21/+24
Not only are the sve-related tb_flags fields unused when SVE is disabled, but not all of the cpu registers are initialized properly for computing same. This can corrupt other fields by ORing in -1, which might result in QEMU crashing. This bug was not present in 3.0, but this patch is cc'd to stable because adf92eab90e3f5f34c285 where the bug was introduced was marked for stable. Fixes: adf92eab90e3f5f34c285 Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-24target/arm: Remove a handful of stray tabsPeter Maydell2-9/+9
Following the bulk conversion of the iwMMXt code, there are just a handful of hard coded tabs in target/arm; fix them. This is a whitespace-only patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180821165215.29069-4-peter.maydell@linaro.org
2018-08-24target/arm: Untabify iwmmxt_helper.cPeter Maydell1-117/+117
Untabify the arm iwmmxt_helper.c. This affects only the iwMMXt code. We've never touched that code in years, so it's not going to get fixed up by our "change when touched" process, and a bulk change is not going to be too disruptive. This commit was produced using Emacs "untabify" (plus one by-hand removal of a space to fix a checkpatch nit); it is a whitespace-only change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180821165215.29069-3-peter.maydell@linaro.org
2018-08-24target/arm: Untabify translate.cPeter Maydell1-61/+61
Untabify the arm translate.c. This affects only some lines, mostly comments, in the iwMMXt code. We've never touched that code in years, so it's not going to get fixed up by our "change when touched" process, and a bulk change is not going to be too disruptive. This commit was produced using Emacs "untabify"; it is a whitespace-only change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180821165215.29069-2-peter.maydell@linaro.org
2018-08-24target/arm: Clear CPSR.IL and CPSR.J on 32-bit exception entryPeter Maydell1-0/+2
On 32-bit exception entry, CPSR.J must always be set to 0 (see v7A Arm ARM DDI0406C.c B1.8.5). CPSR.IL must also be cleared on 32-bit exception entry (see v8A Arm ARM DDI0487C.a G1.10). Clear these bits. (This fixes a bug which will never be noticed by non-buggy guests.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-6-peter.maydell@linaro.org
2018-08-24target/arm: Implement support for taking exceptions to Hyp modePeter Maydell1-0/+82
Implement the necessary support code for taking exceptions to Hyp mode in AArch32. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-5-peter.maydell@linaro.org
2018-08-24target/arm: Factor out code for taking an AArch32 exceptionPeter Maydell1-23/+41
Factor out the code which changes the CPU state so as to actually take an exception to AArch32. We're going to want to use this for handling exception entry to Hyp mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-4-peter.maydell@linaro.org
2018-08-24target/arm: Implement AArch32 HCR and HCR2Peter Maydell1-4/+50
The AArch32 HCR and HCR2 registers alias HCR_EL2 bits [31:0] and [63:32]; implement them. Since HCR2 exists in ARMv8 but not ARMv7, we need new regdef arrays for "we have EL3, not EL2, we're ARMv8" and "we have EL2, we're ARMv8" to hold the definitions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-3-peter.maydell@linaro.org
2018-08-24target/arm: Implement RAZ/WI HACTLR2Peter Maydell1-0/+10
The v8 AArch32 HACTLR2 register maps to bits [63:32] of ACTLR_EL2. We implement ACTLR_EL2 as RAZ/WI, so make HACTLR2 also RAZ/WI. (We put the regdef next to ACTLR_EL2 as a reminder in case we ever make ACTLR_EL2 something other than RAZ/WI). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-2-peter.maydell@linaro.org
2018-08-24target/arm: Use the float-to-int-scale softfloat routinesRichard Henderson1-48/+49
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814002653.12828-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-24target/arm: Use the int-to-float-scale softfloat routinesRichard Henderson1-24/+5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814002653.12828-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23fix "Missing break in switch" coverity reportsPaolo Bonzini1-0/+1
Many of these are marked as "intentional/fix required" because they just need adding a fall through comment. This is exactly what this patch does, except for target/mips/translate.c where it is easier to duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox sources and decide to just remove the LOG_UNIMP before the fallthrough. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-20target/arm: Implement AArch32 ERET instructionPeter Maydell1-2/+29
ARMv7VE introduced the ERET instruction, which is necessary to return from an exception taken to Hyp mode. Implement this. In A32 encoding it is a completely new encoding; in T32 it is an adjustment of the behaviour of the existing "SUBS PC, LR, #<imm8>" instruction. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-10-peter.maydell@linaro.org
2018-08-20target/arm: Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)Peter Maydell2-14/+18
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp from either Monitor or Hyp mode. Our translate time check was overly strict and only permitted access from Monitor mode. The runtime check we do in msr_mrs_banked_exc_checks() had the correct code in it, but never got there because of the earlier "currmode == tgtmode" check. Special case ELR_Hyp. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
2018-08-20target/arm: Implement ESR_EL2/HSR for AArch32 and no-EL2Peter Maydell1-1/+5
The AArch32 HSR is the equivalent of AArch64 ESR_EL2; we can implement it by marking our existing ESR_EL2 regdef as STATE_BOTH. It also needs to be "RES0 from EL3 if EL2 not implemented", so add the missing stanza to el3_no_el2_cp_reginfo. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-8-peter.maydell@linaro.org
2018-08-20target/arm: Implement AArch32 Hyp FARsPeter Maydell1-1/+13
The AArch32 virtualization extensions support these fault address registers: * HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S) * HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S) Implement the accessors for these. This fixes in passing a bug where we weren't implementing the "RES0 from EL3 if EL2 not implemented" behaviour for AArch64 FAR_EL2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-7-peter.maydell@linaro.org
2018-08-20target/arm: Implement AArch32 HVBARPeter Maydell1-2/+2
Implement the AArch32 HVBAR register; we can do this just by making the existing VBAR_EL2 regdefs be STATE_BOTH. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-5-peter.maydell@linaro.org
2018-08-20target/arm: Add missing .cp = 15 to HMAIR1 and HAMAIR1 regdefsPeter Maydell1-4/+4
ARMCPRegInfo structs will default to .cp = 15 if they are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32 (because a coprocessor number of 0 is valid for AArch32). We forgot to explicitly set .cp = 15 for the HMAIR1 and HAMAIR1 regdefs, which meant they would UNDEF when the guest tried to access them under cp15. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-3-peter.maydell@linaro.org
2018-08-20target/arm: Correct typo in HAMAIR1 regdef namePeter Maydell1-2/+2
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the regdef, though, and were incorrectly naming it HMAIR1 (which is a different register which we also implement as RAZ/WI). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180814124254.5229-2-peter.maydell@linaro.org
2018-08-20target/arm: Fix crash on conditional instruction in an IT blockRoman Kapl1-14/+21
If an instruction is conditional (like CBZ) and it is executed conditionally (using the ITx instruction), a jump to an undefined label is generated, and QEMU crashes. CBZ in IT block is an UNPREDICTABLE behavior, but we should not crash. Honouring the condition code is allowed by the spec in this case (constrained unpredictable, ARMv8, section K1.1.7), and matches what we do for other "UNPREDICTABLE inside an IT block" instructions. Fix the 'skip on condition' code to create a new label only if it does not already exist. Previously multiple labels were created, but only the last one of them was set. Signed-off-by: Roman Kapl <rka@sysgo.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180816120533.6587-1-rka@sysgo.com [PMM: fixed ^ 1 being applied to wrong argument, fixed typo] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Fix aa64 FCADD and FCMLA decodeRichard Henderson1-6/+6
These insns require u=1; failed to include that in the switch cases. This probably happened during one of the rebases just before final commit. Fixes: d17b7cdcf4e Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-halfRichard Henderson1-2/+2
We were using the wrong flush-to-zero bit for the non-half input. Fixes: 46d33d1e3c9 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_hRichard Henderson1-1/+1
This makes float16_muladd correctly use FZ16 not FZ. Fixes: 6ceabaad110 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Ignore float_flag_input_denormal from fp_status_f16Richard Henderson1-1/+5
When FZ is set, input_denormal exceptions are recognized, but this does not happen with FZ16. The softfloat code has no way to distinguish these bits and will raise such exceptions into fp_status_f16.flags, so ignore them when computing the accumulated flags. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Adjust FPCR_MASK for FZ16Richard Henderson2-1/+6
When support for FZ16 was added, we failed to include the bit within FPCR_MASK, which means that it could never be set. Continue to zero FZ16 when ARMv8.2-FP16 is not enabled. Fixes: d81ce0ef2c4 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: add "cortex-m0" CPU modelStefan Hajnoczi1-0/+11
Define a "cortex-m0" ARMv6-M CPU model. Most of the register reset values set by other CPU models are not relevant for the cut-down ARMv6-M architecture. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Add sve-max-vq cpu property to -cpu maxRichard Henderson4-5/+40
This allows the default (and maximum) vector length to be set from the command-line. Which is extraordinarily helpful in debugging problems depending on vector length without having to bake knowledge of PR_SET_SVE_VL into every guest binary. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Dump SVE state if enabledRichard Henderson1-11/+82
Also fold the FPCR/FPSR state onto the same line as PSTATE, and mention but do not dump disabled FPU state. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Reformat integer register dumpRichard Henderson1-7/+6
With PC, there are 33 registers. Three per line lines up nicely without overflowing 80 columns. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Fix offset scaling for LD_zprr and ST_zprrRichard Henderson1-3/+2
The scaling should be solely on the memory operation size; the number of registers being loaded does not come in to the initial computation. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Fix offset for LD1R instructionsRichard Henderson1-1/+2
The immediate should be scaled by the size of the memory reference, not the size of the elements into which it is loaded. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Fix sign-extension in sve do_ldr/do_strRichard Henderson1-10/+8
The expression (int) imm + (uint32_t) len_align turns into uint32_t and thus with negative imm produces a memory operation at the wrong offset. None of the numbers involved are particularly large, so change everything to use int. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16target/arm: Fix typo in helper_sve_ld1hss_rRichard Henderson1-1/+1
Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Fix typo in helper_sve_movz_dRichard Henderson1-1/+1
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Reorganize SVE WHILERichard Henderson2-22/+32
The pseudocode for this operation is an increment + compare loop, so comparing <= the maximum integer produces an all-true predicate. Rather than bound in both the inline code and the helper, pass the helper the number of predicate bits to set instead of the number of predicate elements to set. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Fix typo in do_sat_addsub_64Richard Henderson1-1/+1
Used the wrong temporary in the computation of subtractive overflow. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzwRichard Henderson1-6/+6
The normal vector element is sign-extended before comparing with the wide vector element. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180801123111.3595-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Implement tailchaining for M profile coresPeter Maydell1-0/+16
Tailchaining is an optimization in handling of exception return for M-profile cores: if we are about to pop the exception stack for an exception return, but there is a pending exception which is higher priority than the priority we are returning to, then instead of unstacking and then immediately taking the exception and stacking registers again, we can chain to the pending exception without unstacking and stacking. For v6M and v7M it is IMPDEF whether tailchaining happens for pending exceptions; for v8M this is architecturally required. Implement it in QEMU for all M-profile cores, since in practice v6M and v7M hardware implementations generally do have it. (We were already doing tailchaining for derived exceptions which happened during exception return, like the validity checks and stack access failures; these have always been required to be tailchained for all versions of the architecture.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180720145647.8810-5-peter.maydell@linaro.org
2018-08-14target/arm: Restore M-profile CONTROL.SPSEL before any tailchainingPeter Maydell1-6/+10
On exception return for M-profile, we must restore the CONTROL.SPSEL bit from the EXCRET value before we do any kind of tailchaining, including for the derived exceptions on integrity check failures. Otherwise we will give the guest an incorrect EXCRET.SPSEL value on exception entry for the tailchained exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180720145647.8810-4-peter.maydell@linaro.org
2018-08-14target/arm: Initialize exc_secure correctly in do_v7m_exception_exit()Peter Maydell1-1/+1
In do_v7m_exception_exit(), we use the exc_secure variable to track whether the exception we're returning from is secure or non-secure. Unfortunately the statement initializing this was accidentally inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional, which meant that we were using the wrong value for NMI handlers. Move the initialization out to the right place. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180720145647.8810-3-peter.maydell@linaro.org
2018-08-14target/arm: Improve exception-taken loggingPeter Maydell1-6/+11
Improve the exception-taken logging by logging in v7m_exception_taken() the exception we're going to take and whether it is secure/nonsecure. This requires us to move logging at many callsites from after the call to before it, so that the logging appears in a sensible order. (This will make tail-chaining produce more useful logs; for the current callers of v7m_exception_taken() we know which exception we're going to take, so custom log messages at the callsite sufficed; for tail-chaining only v7m_exception_taken() knows the exception number that we're going to tail-chain to.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180720145647.8810-2-peter.maydell@linaro.org
2018-08-14target/arm: Treat SCTLR_EL1.M as if it were zero when HCR_EL2.TGE is setPeter Maydell1-0/+8
One of the required effects of setting HCR_EL2.TGE is that when SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for all purposes except direct reads. That is, it effectively disables the MMU for the NS EL0/EL1 translation regime. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-6-peter.maydell@linaro.org
2018-08-14target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO}Peter Maydell2-9/+61
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as 1 for all purposes other than direct reads" if HCR_EL2.TGE is set and HCR_EL2.E2H is 0, and to "behave as 0 for all purposes other than direct reads" if HCR_EL2.TGE is set and HRC_EL2.E2H is 1. To avoid having to check E2H and TGE everywhere where we test IMO and FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H case will never be true, but we include the logic to save effort when we eventually do get to that. (Note that in several of these callsites the change doesn't actually make a difference as either the callsite is handling TGE specially anyway, or the CPU can't get into that situation with TGE set; we change everywhere for consistency.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-5-peter.maydell@linaro.org
2018-08-14target/arm: Honour HCR_EL2.TGE when raising synchronous exceptionsPeter Maydell1-0/+14
Whene we raise a synchronous exception, if HCR_EL2.TGE is set then exceptions targeting NS EL1 must be redirected to EL2. Implement this in raise_exception() -- all synchronous exceptions go through this function. (Asynchronous exceptions go via arm_cpu_exec_interrupt(), which already honours HCR_EL2.TGE when it determines the target EL in arm_phys_excp_target_el().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-4-peter.maydell@linaro.org
2018-08-14target/arm: Honour HCR_EL2.TGE and MDCR_EL2.TDE in debug register access checksPeter Maydell1-6/+12
Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA, and TDA, which we implement in the functions access_tdra(), access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1. Implement this by having the access functions check MDCR_EL2.TDE and HCR_EL2.TGE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-3-peter.maydell@linaro.org
2018-08-14target/arm: Mask virtual interrupts if HCR_EL2.TGE is setPeter Maydell1-2/+4
If the "trap general exceptions" bit HCR_EL2.TGE is set, we must mask all virtual interrupts (as per DDI0487C.a D1.14.3). Implement this in arm_excp_unmasked(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180724115950.17316-2-peter.maydell@linaro.org
2018-08-14target/arm: Allow execution from small regionsPeter Maydell1-23/+0
Now that we have full support for small regions, including execution, we can remove the workarounds where we marked all small regions as non-executable for the M-profile MPU and SAU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180710160013.26559-7-peter.maydell@linaro.org
2018-08-14arm: Add ARMv6-M programmer's model supportJulia Suvorova2-2/+15
Forbid stack alignment change. (CCR) Reserve FAULTMASK, BASEPRI registers. Report any fault as a HardFault. Disable MemManage, BusFault and UsageFault, so they always escalated to HardFault. (SHCSR) Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180718095628.26442-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14target/arm: Forbid unprivileged mode for M BaselineJulia Suvorova1-4/+8
MSR handling is the only place where CONTROL.nPRIV is modified. Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-id: 20180705222622.17139-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-12-28 13:25:11 +0000