aboutsummaryrefslogtreecommitdiff
path: root/target/arm/helper.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-16target/arm: Add support for missing Jazelle system registersMarc Zyngier1-0/+27
QEMU lacks the minimum Jazelle implementation that is required by the architecture (everything is RAZ or RAZ/WI). Add it together with the HCR_EL2.TID0 trapping that goes with it. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-6-maz@kernel.org [PMM: moved ARMCPRegInfo array to file scope, marked it 'static global', moved new condition down in register_cp_regs_for_features() to go with other feature things rather than up with the v6/v7/v8 stuff] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16target/arm: Handle AArch32 CP15 trapping via HSTR_EL2Marc Zyngier1-0/+6
HSTR_EL2 offers a way to trap ranges of CP15 system register accesses to EL2, and it looks like this register is completely ignored by QEMU. To avoid adding extra .accessfn filters all over the place (which would have a direct performance impact), let's add a new TB flag that gets set whenever HSTR_EL2 is non-zero and that QEMU translates a context where this trap has a chance to apply, and only generate the extra access check if the hypervisor is actively using this feature. Tested with a hand-crafted KVM guest accessing CBAR. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-5-maz@kernel.org [PMM: use is_a64(); fix comment syntax] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16target/arm: Honor HCR_EL2.TID1 trapping requirementsMarc Zyngier1-4/+32
HCR_EL2.TID1 mandates that access from EL1 to REVIDR_EL1, AIDR_EL1 (and their 32bit equivalents) as well as TCMTR, TLBTR are trapped to EL2. QEMU ignores it, making it harder for a hypervisor to virtualize the HW (though to be fair, no known hypervisor actually cares). Do the right thing by trapping to EL2 if HCR_EL2.TID1 is set. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-3-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16target/arm: Honor HCR_EL2.TID2 trapping requirementsMarc Zyngier1-4/+27
HCR_EL2.TID2 mandates that access from EL1 to CTR_EL0, CCSIDR_EL1, CCSIDR2_EL1, CLIDR_EL1, CSSELR_EL1 are trapped to EL2, and QEMU completely ignores it, making it impossible for hypervisors to virtualize the cache hierarchy. Do the right thing by trapping to EL2 if HCR_EL2.TID2 is set. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191201122018.25808-2-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-26target/arm: Honor HCR_EL2.TID3 trapping requirementsMarc Zyngier1-0/+76
HCR_EL2.TID3 mandates that access from EL1 to a long list of id registers traps to EL2, and QEMU has so far ignored this requirement. This breaks (among other things) KVM guests that have PtrAuth enabled, while the hypervisor doesn't want to expose the feature to its guest. To achieve this, KVM traps the ID registers (ID_AA64ISAR1_EL1 in this case), and masks out the unsupported feature. QEMU not honoring the trap request means that the guest observes that the feature is present in the HW, starts using it, and dies a horrible death when KVM injects an UNDEF, because the feature *really* isn't supported. Do the right thing by trapping to EL2 if HCR_EL2.TID3 is set. Note that this change does not include trapping of the MVFR registers from AArch32 (they are accessed via the VMRS instruction and need to be handled in a different way). Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Will Deacon <will@kernel.org> Message-id: 20191123115618.29230-1-maz@kernel.org [PMM: added missing accessfn line for ID_AA4PFR2_EL1_RESERVED; changed names of access functions to include _tid3] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-26target/arm: Fix ISR_EL1 tracking when executing at EL2Marc Zyngier1-2/+5
The ARMv8 ARM states when executing at EL2, EL3 or Secure EL1, ISR_EL1 shows the pending status of the physical IRQ, FIQ, or SError interrupts. Unfortunately, QEMU's implementation only considers the HCR_EL2 bits, and ignores the current exception level. This means a hypervisor trying to look at its own interrupt state actually sees the guest state, which is unexpected and breaks KVM as of Linux 5.3. Instead, check for the running EL and return the physical bits if not running in a virtualized context. Fixes: 636540e9c40b Cc: qemu-stable@nongnu.org Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-id: 20191122135833.28953-1-maz@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19target/arm: Merge arm_cpu_vq_map_next_smaller into sole callerRichard Henderson1-2/+7
Coverity reports, in sve_zcr_get_valid_len, "Subtract operation overflows on operands arm_cpu_vq_map_next_smaller(cpu, start_vq + 1U) and 1U" First, the aarch32 stub version of arm_cpu_vq_map_next_smaller, returning 0, does exactly what Coverity reports. Remove it. Second, the aarch64 version of arm_cpu_vq_map_next_smaller has a set of asserts, but they don't cover the case in question. Further, there is a fair amount of extra arithmetic needed to convert from the 0-based zcr register, to the 1-base vq form, to the 0-based bitmap, and back again. This can be simplified by leaving the value in the 0-based form. Finally, use test_bit to simplify the common case, where the length in the zcr registers is in fact a supported length. Reported-by: Coverity (CID 1407217) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20191118091414.19440-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01target/arm/cpu64: max cpu: Introduce sve<N> propertiesAndrew Jones1-1/+9
Introduce cpu properties to give fine control over SVE vector lengths. We introduce a property for each valid length up to the current maximum supported, which is 2048-bits. The properties are named, e.g. sve128, sve256, sve384, sve512, ..., where the number is the number of bits. See the updates to docs/arm-cpu-features.rst for a description of the semantics and for example uses. Note, as sve-max-vq is still present and we'd like to be able to support qmp_query_cpu_model_expansion with guests launched with e.g. -cpu max,sve-max-vq=8 on their command lines, then we do allow sve-max-vq and sve<N> properties to be provided at the same time, but this is not recommended, and is why sve-max-vq is not mentioned in the document. If sve-max-vq is provided then it enables all lengths smaller than and including the max and disables all lengths larger. It also has the side-effect that no larger lengths may be enabled and that the max itself cannot be disabled. Smaller non-power-of-two lengths may, however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a guest the vector lengths 128, 256, and 512 bits. This patch has been co-authored with Richard Henderson, who reworked the target/arm/cpu64.c changes in order to push all the validation and auto-enabling/disabling steps into the finalizer, resulting in a nice LOC reduction. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Rely on hflags correct in cpu_get_tb_cpu_stateRichard Henderson1-3/+6
This is the payoff. From perf record -g data of ubuntu 18 boot and shutdown: BEFORE: - 23.02% 2.82% qemu-system-aar [.] helper_lookup_tb_ptr - 20.22% helper_lookup_tb_ptr + 10.05% tb_htable_lookup - 9.13% cpu_get_tb_cpu_state 3.20% aa64_va_parameters_both 0.55% fp_exception_el - 11.66% 4.74% qemu-system-aar [.] cpu_get_tb_cpu_state - 6.96% cpu_get_tb_cpu_state 3.63% aa64_va_parameters_both 0.60% fp_exception_el 0.53% sve_exception_el AFTER: - 16.40% 3.40% qemu-system-aar [.] helper_lookup_tb_ptr - 13.03% helper_lookup_tb_ptr + 11.19% tb_htable_lookup 0.55% cpu_get_tb_cpu_state 0.98% 0.71% qemu-system-aar [.] cpu_get_tb_cpu_state 0.87% 0.24% qemu-system-aar [.] rebuild_hflags_a64 Before, helper_lookup_tb_ptr is the second hottest function in the application, consuming almost a quarter of the runtime. Within the entire execution, cpu_get_tb_cpu_state consumes about 12%. After, helper_lookup_tb_ptr has dropped to the fourth hottest function, with consumption dropping to a sixth of the runtime. Within the entire execution, cpu_get_tb_cpu_state has dropped below 1%, and the supporting function to rebuild hflags also consumes about 1%. Assertions are retained for --enable-debug-tcg. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Rebuild hflags at Xscale SCTLR writesRichard Henderson1-0/+10
Continue setting, but not relying upon, env->hflags. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Rebuild hflags at EL changesRichard Henderson1-0/+2
Begin setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Add HELPER(rebuild_hflags_{a32, a64, m32})Richard Henderson1-0/+24
This functions are given the mode and el state of the cpu and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Hoist store to cs_base in cpu_get_tb_cpu_stateRichard Henderson1-1/+1
By performing this store early, we avoid having to save and restore the register holding the address around any function calls. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out arm_mmu_idx_elRichard Henderson1-5/+7
Avoid calling arm_current_el() twice. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Add arm_rebuild_hflagsRichard Henderson1-8/+22
This function assumes nothing about the current state of the cpu, and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Hoist computation of TBFLAG_A32.VFPENRichard Henderson1-4/+10
There are 3 conditions that each enable this flag. M-profile always enables; A-profile with EL1 as AA64 always enables. Both of these conditions can easily be cached. The final condition relies on the FPEXC register which we are not prepared to cache. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Simplify set of PSTATE_SS in cpu_get_tb_cpu_stateRichard Henderson1-12/+8
Hoist the variable load for PSTATE into the existing test vs is_a64. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Hoist XSCALE_CPAR, VECLEN, VECSTRIDE in cpu_get_tb_cpu_stateRichard Henderson1-7/+14
We do not need to compute any of these values for M-profile. Further, XSCALE_CPAR overlaps VECSTRIDE so obviously the two sets must be mutually exclusive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_aprofileRichard Henderson1-8/+12
Create a function to compute the values of the TBFLAG_ANY bits that will be cached, and are used by A-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_a32Richard Henderson1-1/+7
Currently a trivial wrapper for rebuild_hflags_common_32. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Reduce tests vs M-profile in cpu_get_tb_cpu_stateRichard Henderson1-26/+23
Hoist the computation of some TBFLAG_A32 bits that only apply to M-profile under a single test for ARM_FEATURE_M. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_m32Richard Henderson1-15/+30
Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by M-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split arm_cpu_data_is_big_endianRichard Henderson1-4/+12
Set TBFLAG_ANY.BE_DATA in rebuild_hflags_common_32 and rebuild_hflags_a64 instead of rebuild_hflags_common, where we do not need to re-test is_a64() nor re-compute the various inputs. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_common_32Richard Henderson1-5/+11
Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by all profiles. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_a64Richard Henderson1-59/+66
Create a function to compute the values of the TBFLAG_A64 bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Note that not all BTI related flags are cached, so we have to test the BTI feature twice -- once for those bits moved out to rebuild_hflags_a64 and once for those bits that remain in cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Split out rebuild_hflags_commonRichard Henderson1-7/+19
Create a function to compute the values of the TBFLAG_ANY bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-27target/arm: remove run time semihosting checksAlex Bennée1-74/+22
Now we do all our checking and use a common EXCP_SEMIHOST for semihosting operations we can make helper code a lot simpler. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190913151845.12582-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-27target/arm: fix CBAR register for AArch64 CPUsLuc Michel1-3/+16
For AArch64 CPUs with a CBAR register, we have two views for it: - in AArch64 state, the CBAR_EL1 register (S3_1_C15_C3_0), returns the full 64 bits CBAR value - in AArch32 state, the CBAR register (cp15, opc1=1, CRn=15, CRm=3, opc2=0) returns a 32 bits view such that: CBAR = CBAR_EL1[31:18] 0..0 CBAR_EL1[43:32] This commit fixes the current implementation where: - CBAR_EL1 was returning the 32 bits view instead of the full 64 bits value, - CBAR was returning a truncated 32 bits version of the full 64 bits one, instead of the 32 bits view - CBAR was declared as cp15, opc1=4, CRn=15, CRm=0, opc2=0, which is the CBAR register found in the ARMv7 Cortex-Ax CPUs, but not in ARMv8 CPUs. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20190912110103.1417887-1-luc.michel@greensocs.com [PMM: Added a comment about the two different kinds of CBAR] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03target/arm: Take exceptions on ATS instructions when neededPeter Maydell1-15/+92
The translation table walk for an ATS instruction can result in various faults. In general these are just reported back via the PAR_EL1 fault status fields, but in some cases the architecture requires that the fault is turned into an exception: * synchronous stage 2 faults of any kind during AT S1E0* and AT S1E1* instructions executed from NS EL1 fault to EL2 or EL3 * synchronous external aborts are taken as Data Abort exceptions (This is documented in the v8A Arm ARM DDI0487A.e D5.2.11 and G5.13.4.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20190816125802.25877-3-peter.maydell@linaro.org
2019-08-16Merge remote-tracking branch ↵Peter Maydell1-0/+7
'remotes/pmaydell/tags/pull-target-arm-20190816' into staging target-arm queue: * target/arm: generate a custom MIDR for -cpu max * hw/misc/zynq_slcr: refactor to use standard register definition * Set ENET_BD_BDU in I.MX FEC controller * target/arm: Fix routing of singlestep exceptions * refactor a32/t32 decoder handling of PC * minor optimisations/cleanups of some a32/t32 codegen * target/arm/cpu64: Ensure kvm really supports aarch64=off * target/arm/cpu: Ensure we can use the pmu with kvm * target/arm: Minor cleanups preparatory to KVM SVE support # gpg: Signature made Fri 16 Aug 2019 14:15:55 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits) target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR target/arm: Use tcg_gen_rotri_i32 for gen_swap_half target/arm: Use ror32 instead of open-coding the operation target/arm: Remove redundant shift tests target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB target/arm: Use tcg_gen_extract_i32 for shifter_out_im target/arm/kvm64: Move the get/put of fpsimd registers out target/arm/kvm64: Fix error returns target/arm/cpu: Use div-round-up to determine predicate register array size target/arm/helper: zcr: Add build bug next to value range assumption target/arm/cpu: Ensure we can use the pmu with kvm target/arm/cpu64: Ensure kvm really supports aarch64=off target/arm: Remove helper_double_saturate target/arm: Use unallocated_encoding for aarch32 target/arm: Remove offset argument to gen_exception_bkpt_insn target/arm: Replace offset with pc in gen_exception_internal_insn target/arm: Replace offset with pc in gen_exception_insn target/arm: Replace s->pc with s->base.pc_next target/arm: Remove redundant s->pc & ~1 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16target/arm/helper: zcr: Add build bug next to value range assumptionAndrew Jones1-0/+1
The current implementation of ZCR_ELx matches the architecture, only implementing the lower four bits, with the rest RAZ/WI. This puts a strict limit on ARM_MAX_VQ of 16. Make sure we don't let ARM_MAX_VQ grow without a corresponding update here. Suggested-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16target/arm: Fix routing of singlestep exceptionsPeter Maydell1-0/+6
When generating an architectural single-step exception we were routing it to the "default exception level", which is to say the same exception level we execute at except that EL0 exceptions go to EL1. This is incorrect because the debug exception level can be configured by the guest for situations such as single stepping of EL0 and EL1 code by EL2. We have to track the target debug exception level in the TB flags, because it is dependent on CPU state like HCR_EL2.TGE and MDCR_EL2.TDE. (That we were previously calling the arm_debug_target_el() function to determine dc->ss_same_el is itself a bug, though one that would only have manifested as incorrect syndrome information.) Since we are out of TB flag bits unless we want to expand into the cs_base field, we share some bits with the M-profile only HANDLER and STACKCHECK bits, since only A-profile has this singlestep. Fixes: https://bugs.launchpad.net/qemu/+bug/1838913 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190805130952.4415-3-peter.maydell@linaro.org
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster1-0/+2
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-07-22target/arm: Add missing break statement for Hypervisor Trap ExceptionPhilippe Mathieu-Daudé1-0/+1
Reported by GCC9 when building with -Wimplicit-fallthrough=2: target/arm/helper.c: In function ‘arm_cpu_do_interrupt_aarch32_hyp’: target/arm/helper.c:7958:14: error: this statement may fall through [-Werror=implicit-fallthrough=] 7958 | addr = 0x14; | ~~~~~^~~~~~ target/arm/helper.c:7959:5: note: here 7959 | default: | ^~~~~~~ cc1: all warnings being treated as errors Fixes: b9bc21ff9f9 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190719111451.12406-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-08target/arm: Fix sve_zcr_len_for_elRichard Henderson1-2/+2
Off by one error in the EL2 and EL3 tests. Remove the test against EL3 entirely, since it must always be true. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190702104732.31154-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04target/arm/helper: Move M profile routines to m_helper.cPhilippe Mathieu-Daudé1-2634/+4
In preparation for supporting TCG disablement on ARM, we move most of TCG related v7m/v8m helpers and APIs into their own file. Note: It is easier to review this commit using the 'histogram' diff algorithm: $ git diff --diff-algorithm=histogram ... or $ git diff --histogram ... Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190702144335.10717-2-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated qapi #include to match recent changes there] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04target/arm: Restrict semi-hosting to TCGPhilippe Mathieu-Daudé1-1/+7
Per Peter Maydell: Semihosting hooks either SVC or HLT instructions, and inside KVM both of those go to EL1, ie to the guest, and can't be trapped to KVM. Let check_for_semihosting() return False when not running on TCG. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701194942.10092-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/armbru/tags/pull-monitor-2019-07-02-v2' into staging Monitor patches for 2019-07-02 # gpg: Signature made Tue 02 Jul 2019 12:37:57 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2019-07-02-v2: dump: Move HMP command handlers to dump/ MAINTAINERS: Add Windows dump to section "Dump" dump: Move the code to dump/ qapi: Split dump.json off misc.json qapi: Rename target.json to misc-target.json qapi: Split machine-target.json off target.json and misc.json hw/core: Collect HMP command handlers in hw/core/ hw/core: Collect QMP command handlers in hw/core/ hw/core: Move numa.c to hw/core/ qapi: Split machine.json off misc.json MAINTAINERS: Merge sections CPU, NUMA into Machine core qom: Move HMP command handlers to qom/ qom: Move QMP command handlers to qom/ qapi: Split qom.json and qdev.json off misc.json hmp: Move hmp.h to include/monitor/ Makefile: Don't add monitor/ twice to common-obj-y MAINTAINERS: Make section "QOM" cover qdev as well MAINTAINERS: new maintainers for QOM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02qapi: Split machine-target.json off target.json and misc.jsonMarkus Armbruster1-1/+1
Move commands query-cpu-definitions, query-cpu-model-baseline, query-cpu-model-comparison, and query-cpu-model-expansion with their types from target.json to machine-target.json. Also move types CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from misc.json there. Add machine-target.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-13-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Commit message typo fixed]
2019-07-01target/arm: Declare some M-profile functions publiclyPhilippe Mathieu-Daudé1-36/+2
In the next commit we will split the M-profile functions from this file. Some function will be called out of helper.c. Declare them in the "internals.h" header. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-22-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Declare arm_log_exception() function publiclyPhilippe Mathieu-Daudé1-38/+38
In few commits we will split the M-profile functions from this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Since it is in the middle of a block of M profile functions, move it previous to this block to ease the later refactor. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-21-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Move TLB related routines to tlb_helper.cPhilippe Mathieu-Daudé1-53/+0
These routines are TCG specific. The arm_deliver_fault() function is only used within the new helper. Make it static. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-13-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Declare get_phys_addr() function publiclyPhilippe Mathieu-Daudé1-16/+5
In the next commit we will split the TLB related routines of this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-12-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Move the DC ZVA helper into op_helperSamuel Ortiz1-92/+0
Those helpers are a software implementation of the ARM v8 memory zeroing op code. They should be moved to the op helper file, which is going to eventually be built only when TCG is enabled. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Robert Bradford <robert.bradford@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-10-philmd@redhat.com [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Fix multiline comment syntaxPhilippe Mathieu-Daudé1-79/+158
Since commit 8c06fbdf36b checkpatch.pl enforce a new multiline comment syntax. Since we'll move this code around, fix its style first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm/helper: Remove unused includePhilippe Mathieu-Daudé1-2/+0
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-7-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01target/arm: Add copyright boilerplatePhilippe Mathieu-Daudé1-0/+7
Reviewed-by: Robert Bradford <robert.bradford@intel.com> Reviewed-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-13target/arm: Implement NSACR gating of floating pointPeter Maydell1-2/+73
The NSACR register allows secure code to configure the FPU to be inaccessible to non-secure code. If the NSACR.CP10 bit is set then: * NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2) * CPACR.{CP10,CP11} behave as if RAZ/WI * HCPTR.{TCP11,TCP10} behave as if RAO/WI Note that we do not implement the NSACR.NSASEDIS bit which gates only access to Advanced SIMD, in the same way that we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-03-04 03:52:23 +0000