aboutsummaryrefslogtreecommitdiff
path: root/target-xtensa
AgeCommit message (Collapse)AuthorFilesLines
2012-12-16exec: refactor cpu_restore_stateBlue Swirl1-12/+2
Refactor common code around calls to cpu_restore_state(). tb_find_pc() has now no external users, make it static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-15target-xtensa: fix ITLB/DTLB page protection flagsMax Filippov1-1/+2
With MMU option xtensa architecture has two TLBs: ITLB and DTLB. ITLB is only used for code access, DTLB is only for data. However TLB entries in both TLBs have attribute field controlling write and exec access. These bits need to be properly masked off depending on TLB type before being used as tlb_set_page prot argument. Otherwise the following happens: (1) ITLB entry for some PFN gets invalidated (2) DTLB entry for the same PFN gets updated, attributes allow code execution (3) code at the page with that PFN is executed (possible due to step 2), entry for the TB is written into the jump cache (4) QEMU TLB entry for the PFN gets replaced with an entry for some other PFN (5) code in the TB from step 3 is executed (possible due to jump cache) and it accesses data, for which there's no DTLB entry, causing DTLB miss exception (6) re-translation of the TB from step 5 is attempted, but there's no QEMU TLB entry nor xtensa ITLB entry for that PFN, which causes ITLB miss exception at the TB start address (7) ITLB miss exception is handled by the guest, but execution is resumed from the beginning of the faulting TB (the point where ITLB miss occured), not from the point where DTLB miss occured, which is wrong. With that fix the above scenario causes ITLB miss exception (that used to be step 7) at step 3, right at the beginning of the TB. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable@nongnu.org Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: use movcond where possibleMax Filippov1-50/+42
Use movcond for all sorts of conditional moves, ABS, CLAMPS, MIN/MAX opcodes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: implement MISC SRMax Filippov3-0/+6
The Miscellaneous Special Registers Option provides zero to four scratch registers within the processor readable and writable by RSR, WSR, and XSR. These registers are privileged. They may be useful for some application-specific exception and interrupt processing tasks in the kernel. The MISC registers are undefined after reset. See ISA, 4.7.3 for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: better control rsr/wsr/xsr access to SRsMax Filippov1-19/+30
There are read-only (DEBUGCAUSE, PRID) and write-only (INTCLEAR) SRs, and INTERRUPT/INTSET SR allows rsr/wsr, but not xsr. Raise illeagal opcode exception on illegal access to these SRs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: restrict available SRs by enabled optionsMax Filippov3-105/+130
Beginning with the RA-2004.1 release, SR access instructions (rsr, wsr, xsr) are associated with their corresponding SR and raise illegal opcode exception in case the register is not configured for the core. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: implement CACHEATTR SRMax Filippov5-1/+25
In XEA1, the Options for Memory Protection and Translation and the corresponding TLB management instructions are not available. Instead, functionality similar to the Region Protection Option is available through the cache attribute register. See ISA, A.2.14 for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08target-xtensa: implement ATOMCTL SRMax Filippov7-14/+131
ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory type. See ISA, 4.3.12.4 for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin1-2/+2
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin1-1/+1
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin1-2/+2
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin1-2/+2
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin1-3/+3
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10target-xtensa: avoid using cpu_single_envBlue Swirl1-5/+5
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-10-31cpus: Pass CPUState to [qemu_]cpu_has_work()Andreas Färber1-1/+3
For target-mips also change the return type to bool. Make include paths for cpu-qom.h consistent for alpha and unicore32. Signed-off-by: Andreas Färber <afaerber@suse.de> [AF: Updated new target-openrisc function accordingly] Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
2012-10-28target-xtensa: rename helper flagsAurelien Jarno1-8/+8
Rename helper flags to the new ones. This is purely a mechanical change, it's possible to use better flags by looking at the helpers. Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity2-4/+4
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-06target-xtensa: de-optimize EXTUIAurelien Jarno1-20/+2
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift are optimized in tcg/tcg-op.h there is no need to do it in target-xtensa/translate.c. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson1-1/+1
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22target-xtensa: implement coprocessor context optionMax Filippov2-0/+43
In case Coprocessor Context option is enabled CPENABLE SR bits control whether access to coprocessors is allowed or would rise one of CoprocessorXDisabled exceptions. See ISA, 4.4.5 for more details. FP is coprocessor 0. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP1 groupMax Filippov3-1/+135
These are comparison and conditional move opcodes. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP0 conversionsMax Filippov3-0/+89
These are FP to integer and integer to FP conversion opcodes. See ISA, 4.3.10 for more details. Note that ISA description for utrunc.s is currently incorrect and will be fixed in future revisions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement FP0 arithmeticMax Filippov3-1/+104
These are FP arithmetic opcodes. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: implement LSCX and LSCI groupsMax Filippov1-4/+54
These are load/store instructions for FP registers with immediate or register index and optional base post-update. See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: add FP registersMax Filippov4-7/+63
There are 16 32-bit FP registers (f0 - f15), control and status user registers (fcr, fsr). See ISA, 4.3.10 for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-22target-xtensa: handle boolean option in overlaysMax Filippov1-0/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-21target-xtensa: don't emit extra tcg_gen_goto_tbMax Filippov1-1/+3
Unconditional gen_check_loop_end at the end of disas_xtensa_insn can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when TB ends at LEND with a branch). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: malc <av1474@comtv.ru>
2012-09-21target-xtensa: fix extui shift amountMax Filippov1-3/+21
extui opcode only uses lowermost op1 bit for sa4. Reported-by: malc <av1474@comtv.ru> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: malc <av1474@comtv.ru>
2012-09-08target-xtensa: fix missing errno codes for mingw32Max Filippov1-0/+6
Put the following errno value mappings under #ifdef: xtensa-semi.c: In function 'errno_h2g': xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function) xtensa-semi.c:113: error: (Each undeclared identifier is reported only once xtensa-semi.c:113: error: for each function it appears in.) xtensa-semi.c:113: error: array index in initializer not of integer type xtensa-semi.c:113: error: (near initialization for 'guest_errno') xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function) xtensa-semi.c:124: error: array index in initializer not of integer type xtensa-semi.c:124: error: (near initialization for 'guest_errno') xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function) xtensa-semi.c:134: error: array index in initializer not of integer type xtensa-semi.c:134: error: (near initialization for 'guest_errno') Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-05target-xtensa: convert host errno values to guestMax Filippov1-8/+98
Guest errno values are taken from the newlib. Convert only those errno values that can be returned from used system calls. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-01target-xtensa: return ENOSYS for unimplemented simcallsMax Filippov1-0/+2
This prevents guest from proceeding with uninitialised garbage returned from unimplemented simcalls. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09Merge branch 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemuBlue Swirl1-7/+1
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu: target-i386: move tcg initialization into x86_cpu_initfn() cleanup cpu_set_debug_excp_handler target-xtensa: drop usage of prev_debug_excp_handler target-i386: drop usage of prev_debug_excp_handler
2012-08-09target-xtensa: make default CPU depend on target endiannessMax Filippov1-0/+6
This makes usable default for -cpu option both for qemu-system-xtensa and qemu-system-xtensaeb fixing the following error: $ qemu-system-xtensaeb -M sim Unable to find CPU definition Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-28target-xtensa: fix big-endian BBS/BBC implementationMax Filippov1-2/+14
Quote from ISA, 2.1: For most Xtensa instructions, bit numbering is irrelevant; only the BBC and BBS instructions assign bit numbers to values on which the processor operates. The BBC/BBS instructions use big-endian bit ordering (0 is the most-significant bit) on a big-endian processor configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-25target-xtensa: drop usage of prev_debug_excp_handlerIgor Mammedov1-7/+1
Chains of exception handlers are currently unused feature. Dropping it to be consistent with target-i386 but it may simplify qom-ifying CPU in future like for target-i386. Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2012-06-10target-xtensa: switch to AREG0-free modeMax Filippov4-154/+151
Add env parameter to every helper function that needs it, update 'configure' script. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-10target-xtensa: add attributes to helper functionsMax Filippov1-8/+8
Mark exception generating functions 'noreturn' and pure constant functions as such. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-10target-xtensa: remove unnecessary include of dyngen-exec.hPeter Portante1-1/+0
Signed-off-by: Peter Portante <peter.portante@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: fix CCOUNT for conditional branchesMax Filippov1-0/+2
Taken conditional branches fail to update CCOUNT register because accumulated ccount_delta is reset during translation of non-taken branch. To fix it only update CCOUNT once per conditional branch instruction translation. This fixes guest linux freeze on LTP waitpid06 test. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: control page table lookup explicitlyMax Filippov1-5/+5
Hardware pagetable walking may not be nested. Stop guessing and pass explicit flag to the get_physical_addr_mmu function that controls page table lookup. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: update autorefill TLB entries conditionallyMax Filippov3-27/+35
This is to avoid interference of internal QEMU helpers (cpu_get_phys_page_debug, tb_invalidate_virtual_addr) with guest-visible TLB state. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: extract TLB entry setting methodMax Filippov2-4/+14
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: update EXCVADDR in case of page table lookupMax Filippov1-0/+1
According to ISA, 4.4.2.6, EXCVADDR may be changed by any TLB miss, even if the miss is handled entirely by processor hardware. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09target-xtensa: flush TLB page for new MMU mappingMax Filippov1-0/+1
Both old and new mappings need flushing because their VPN may be different in MMU case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini2-0/+228
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber1-5/+0
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-xtensa: Let cpu_xtensa_init() return XtensaCPUAndreas Färber3-6/+16
Make the include paths for cpu-qom.h consistent to allow using XtensaCPU in cpu.h. Turn cpu_init macro into a static inline function returning CPUXtensaState for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2012-04-21target-xtensa: fix LOOPNEZ/LOOPGTZ translationMax Filippov1-1/+1
Translation of LOOP instructions used to call LEND SR write handler to update LEND and invalidate relevant TBs. Now that LEND SR write handler ends TB, LOOPNEZ and LOOPGTZ generate wrong code (same as for simple LOOP). Fix it by calling wsr_lend helper directly. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-24 02:20:28 +0000