aboutsummaryrefslogtreecommitdiff
path: root/target-s390x/kvm.c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-01virtio-ccw: fix build breakage on windowsCornelia Huck1-2/+3
event_notifier_get_fd() is not available on windows hosts. Fix this by moving the calls to event_notifier_get_fd() to the kvm code. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-28kvm: Change cpu_synchronize_state() argument to CPUStateAndreas Färber1-4/+5
Change Monitor::mon_cpu to CPUState as well. Reviewed-by: liguang <lig.fnst@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-25virtio-ccw: Wire up ioeventfd.Cornelia Huck1-0/+19
On hosts that support ioeventfd, make use of it for host-to-guest notifications via diagnose 500. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-12KVM: S390: Add dummy kvm_arch_init_irq_routing()Alexey Kardashevskiy1-0/+4
The common KVM code insists on calling kvm_arch_init_irq_routing() as soon as it sees kernel header support for it (regardless of whether QEMU supports it). Provide a dummy function to satisfy this. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-14osdep, kvm: rename low-level RAM allocation functionsPaolo Bonzini1-1/+1
This is preparatory to the introduction of a separate freeing API. Reported-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30Wire up disabled wait a panicked event on s390Christian Borntraeger1-3/+14
On s390 the disabled wait state indicates a state of attention. For example Linux uses that state after a panic. Lets put the system into panicked state. An alternative implementation would be to state disabled-wait <address> instead of pause in the action field. (e.g. z/OS, z/VM and other classic OSes use the address of the disabled wait to indicate an error code). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 6cf41156322e27e81a727b69f03728dbc225d5bb.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26Utilize selective runtime reg sync for hot code pathsJason J. Herne1-3/+12
Make use of new kvm_s390_get_registers_partial() for kvm_handle_css_inst() and handle_hypercall() since they only need registers from the partial set and they are called quite frequently. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26Allow selective runtime register synchronizationJason J. Herne1-0/+67
We want to avoid expensive register synchronization IOCTL's on the hot path so a new kvm_s390_get_registers_partial() is introduced as a compliment to kvm_arch_get_registers(). The new function is called on the hot path, and kvm_arch_get_registers() is called when we need the complete runtime register state. kvm_arch_put_registers() is updated to only sync the partial runtime set when we've only dirtied the partial runtime set. This is to avoid sending bad data back to KVM if we've only partially synced the runtime register set. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-17s390: Fix cpu refactoring fallout.Cornelia Huck1-2/+1
Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState" seems to have missed one instance in target-s390x/kvm.c: /home/cohuck/git/qemu/target-s390x/kvm.c: In function ‘kvm_arch_process_async_events’: /home/cohuck/git/qemu/target-s390x/kvm.c:319: error: ‘CPUS390XState’ has no member named ‘halted’ /home/cohuck/git/qemu/target-s390x/kvm.c:320: warning: control reaches end of non-void function make[1]: *** [target-s390x/kvm.o] Error 1 Let's just switch to cs->halted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-08s390: simplify kvm cpu initChristian Borntraeger1-7/+2
There is no special code right now and the reset ioctl is done later on in the the reset handler anyway. Lets simplify the cpu init. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()Andreas Färber1-8/+5
This prepares for moving the halted field to CPUState. Most call sites can already supply S390CPU, for some env becomes unused. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Wire up channel I/O in kvm.Cornelia Huck1-13/+226
Trigger the code for our virtual css in case of instruction intercepts for I/O instructions. Handle the tsch exit for the subchannel-related part of tsch. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-27kvm: Create kvm_arch_vcpu_id() functionEduardo Habkost1-0/+5
This will allow each architecture to define how the VCPU ID is set on the KVM_CREATE_VCPU ioctl call. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-18s390: Add a hypercall registration interface.Cornelia Huck1-1/+1
Allow virtio machines to register for different diag500 function codes and convert s390-virtio to use it. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390x: fix indentationAlexander Graf1-5/+5
In one of the last commits we accidently got 3-space indentation into the tree. Fix it up so it's 4 spaces wide. Reported-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390: Add CPU reset handlerJens Freimann1-1/+8
Add a CPU reset handler to have all CPUs in a PoP compliant state. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> [agraf: move hw/hw.h into existing ifdef] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390: new contributions GPLv2 or laterChristian Borntraeger1-1/+5
IBMs s390 contributions were meant to to be gplv2 or later (since we were contributing to qemu). Several of the s390 specific files link to gpl code anyway, so lets clarify the licence statement for new contributions for those files that we have touched multiple times or will likely touch again. This patch does not touch files that mostly deal with tcg. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-23Merge branch 'master' of git://git.qemu.org/qemu into qom-cpuAndreas Färber1-4/+4
Adapt header include paths. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19cpu: Move kvm_run into CPUStateAndreas Färber1-36/+41
Pass CPUState / {X86,S390}CPU to helper functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19cpu: Move kvm_state field into CPUStateAndreas Färber1-3/+2
Adapt some functions to take CPUState / {PowerPC,S390}CPU argument. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19kvm: Pass CPUState to kvm_vcpu_ioctl()Andreas Färber1-29/+33
Adapt helper functions to pass X86CPU / PowerPCCPU / S390CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19kvm: Pass CPUState to kvm_arch_*Andreas Färber1-13/+25
Move kvm_vcpu_dirty field into CPUState to simplify things and change its type to bool while at it. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31cpus: Pass CPUState to qemu_cpu_kick()Andreas Färber1-1/+1
CPUArchState is no longer needed there. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-29s390: sclp base supportHeinz Graalfs1-4/+1
This adds a more generic infrastructure for handling Service-Call requests on s390. Currently we only support a small subset of Read SCP Info directly in target-s390x. This patch provides the base infrastructure for supporting more commands and moves Read SCP Info. In the future we could add additional commands for hotplug, call home and event handling. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-29s390: use sync regs for register transferChristian Borntraeger1-20/+92
Newer kernels provide the guest registers in kvm_run. Lets use those if available (i.e. the capability is set). This avoids ioctls on cpu_synchronize_state making intercepts faster. In addition, we have now the prefix register, the access registers the control registers up to date. This helps in certain cases, e.g. for resolving kernel module addresses with gdb on a guest. On return, we update the registers according to the level statement, i.e. we put all registers for KVM_PUT_FULL_STATE and _RESET_STATE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15s390: Fix error handling and condition code of service callChristian Borntraeger1-2/+3
Invalid sccb addresses will cause specification or addressing exception. Lets add those checks. Furthermore, the good case (cc=0) was incorrect for KVM, we did not set the CC at all. We now use return codes < 0 as program checks and return codes > 0 as condition code values. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-10s390: autodetect map privateChristian Borntraeger1-0/+35
By default qemu will use MAP_PRIVATE for guest pages. This will write protect pages and thus break on s390 systems that dont support this feature. Therefore qemu has a hack to always use MAP_SHARED for s390. But MAP_SHARED has other problems (no dirty pages tracking, a lot more swap overhead etc.) Newer systems allow the distinction via KVM_CAP_S390_COW. With this feature qemu can use the standard qemu alloc if available, otherwise it will use the old s390 hack. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18s390: stop target cpu on sigp initial resetChristian Borntraeger1-0/+1
We must not run the target cpu after an initial reset. This makes system_reset more reliable for smp guests. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-11target-s390x: Pass S390CPU to s390_cpu_restart()Andreas Färber1-2/+4
Needed for qemu_cpu_kick(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-11s390-virtio: Let s390_cpu_addr2state() return S390CPUAndreas Färber1-2/+4
Convert ipi_states to S390CPU**. Needed for s390_cpu_restart() in handle_sigp(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-05-01S390: dont call system_shutdown on disabled waitChristian Borntraeger1-0/+12
A disabled wait usually indicates a guest problem. Dont shutdown the guest to allow guest dumping. Have some special cases, e.g. a quiesce disabled wait. In that case we want to shutdown. Long term solution might be a crashed/panic indication. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-01S390: support reboot for kvm on s390Jens Freimann1-2/+1
This patch adds reboot support for s390x-softmmu by calling the generic reboot support in kvm. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-14target-s390x: Don't overuse CPUStateAndreas Färber1-28/+28
Scripted conversion: sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc] sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-04s390: fix cpu hotplug / cpu activity on interruptsChristian Borntraeger1-3/+0
The add_del/running_cpu code and env->halted are tracking stopped cpus. Sleeping cpus (idle and enabled for interrupts) are waiting inside the kernel. No interrupt besides the restart can move a cpu from stopped to operational. This is already handled over there. So lets just remove the bogus wakup from the common interrupt delivery, otherwise any interrupt will wake up a cpu, even if this cpu is stopped (Thus leading to strange hangs on sigp restart) This fixes echo 0 > /sys/devices/system/cpu/cpu0/online echo 1 > /sys/devices/system/cpu/cpu0/online in the guest Signed-off-by: Christian Borntraeger<borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14s390: Fix cpu shutdown for KVMChristian Borntraeger1-12/+7
On s390 a shutdown is the state of all CPUs being either stopped or disabled (for interrupts) waiting. We have to track the overall number of running CPUs to call the shutdown sequence accordingly. This patch implements the counting and shutdown handling for the kvm path in qemu. Lets also wrap changes to env->halted and env->exception_index. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20s390x: Fix debugging for unknown sigp order codesChristian Borntraeger1-1/+1
On unknown sigp order codes we print a debug message. This patch fixes the output, since we want to see the order_code and not the register numbers. Patch applies on agraf tree. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20s390x: Adjust internal kvm codeAlexander Graf1-37/+7
We're now finally emulating an s390x CPU, so we can move quite some logic from the kvm code out into generic CPU code. This patch does this and adjusts the interfaces according to what the code around now expects to be able to call. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20s390x: fix smp support for kvmChristian Borntraeger1-1/+1
Currently smp support for kvm does not work. Qemu does a kvm run even on secondary CPUs which dont have a sane state (initial psw == 0) triggering some program faults. Architecturally these cpus are in the stopped state, so we should not do the kvm run ioctl. (these CPUs will be started by a SIGP restart later during the boot process) We need to tell the loop that this cpu should not run. Jan Kiszka pointed out that kvm_arch_process_async_events is the right place to do. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-18s390x: Prepare cpu.h for emulationAlexander Graf1-9/+8
We need to add some more logic to the CPU description to leverage emulation of an s390x CPU. This patch adds all the required helpers, fields in CPUState and constant definitions required for user and system emulation. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: fix KVM targetAlexander Graf1-1/+1
During Jan's rework of the generic KVM layer, he added some more error checks and actually aborted if something went wrong. Unfortunately, one of the s390 internal error codes slipped through, aborting the VM without needing to. This patch fixes booting of S390x virtual machines in KVM. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-16kvm: Align kvm_arch_handle_exit to kvm_cpu_exec changesJan Kiszka1-0/+5
Make the return code of kvm_arch_handle_exit directly usable for kvm_cpu_exec. This is straightforward for x86 and ppc, just s390 would require more work. Avoid this for now by pushing the return code translation logic into s390's kvm_arch_handle_exit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> CC: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-15kvm: Rename kvm_arch_process_irqchip_events to async_eventsJan Kiszka1-1/+1
We will broaden the scope of this function on x86 beyond irqchip events. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-13always qemu_cpu_kick after unhalting a cpuPaolo Bonzini1-0/+1
This ensures env->halt_cond is broadcast, and the loop in qemu_tcg_wait_io_event and qemu_kvm_wait_io_event is exited naturally rather than through a timeout. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-14kvm: Drop return values from kvm_arch_pre/post_runJan Kiszka1-4/+2
We do not check them, and the only arch with non-empty implementations always returns 0 (this is also true for qemu-kvm). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> CC: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14kvm: Provide sigbus services arch-independentlyJan Kiszka1-0/+10
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery from cpus.c. This patch also fixes --disable-kvm build by providing the missing kvm_on_sigbus_vcpu kvm-stub. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-23kvm: Consolidate must-have capability checksJan Kiszka1-0/+4
Instead of splattering the code with #ifdefs and runtime checks for capabilities we cannot work without anyway, provide central test infrastructure for verifying their availability both at build and runtime. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-23kvm: Drop smp_cpus argument from init functionsJan Kiszka1-1/+1
No longer used. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-12-26s390: compile fixesAlexander Graf1-1/+1
The s390 target doesn't compile out of the box anymore. This patch fixes all the obvious glitches that got introduced in the last few weeks. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.1 at 2025-01-14 05:32:13 +0000